A one-sided limit is a limit of a function in which the input approaches a specified point using only values smaller than that point or only values larger than it. These are called the left-hand limit and right-hand limit, respectively. One-sided limits distinguish behavior on opposite sides of a discontinuity and describe behavior at endpoints of a function’s domain. They are fundamental tools in calculus and mathematical analysis.
Notation and definition
Let , where is a subset of the real numbers, and let be a real number.
The notation
means that approaches as approaches through values less than . The superscript minus indicates the direction of approach, not that is negative.
Similarly,
means that approaches through values greater than . Other common notations are and ; these denote limiting values, not necessarily the actual value .
Epsilon–delta definitions
The right-hand limit of at is if, for every , there exists such that
The left-hand limit is if, for every , there exists such that
Here is the absolute value of the difference between the function value and the proposed limit.
For these definitions to determine a unique value, must be an accumulation point of the relevant side of the domain: there must be domain points arbitrarily close to from that side. Without this requirement, the corresponding implication could hold vacuously for every .
Neither definition requires to exist. If is defined, changing that single value does not change either one-sided limit.
Relationship to a two-sided limit
When is approached by domain points from both sides,
if and only if
Thus a finite two-sided limit requires both one-sided limits to exist and agree. If they are different, or if either side fails to have a finite limit, there is no finite two-sided limit.
At a domain endpoint, only one approach direction may be available. For example, for on ,
There is no left-hand approach within this real domain. Under the general definition of a limit relative to the domain, this also establishes . Elementary treatments sometimes reserve “two-sided limit” for situations where both sides are available.
Basic examples
Different limiting values
Consider
Then
Both one-sided limits exist, but the two-sided limit does not. Assigning a different value to cannot make the two limiting values equal.
A limit different from the function value
Let
For , cancellation gives . Consequently,
although . This is a removable discontinuity: replacing by would make the function continuous at .
Oscillation on one side
For
the right-hand limit at does not exist. Arbitrarily close to , the function continues to take the values and . Restricting the approach to one side does not eliminate oscillation.
Infinite one-sided limits
One-sided behavior can also be expressed using and . These are not finite real limits; they describe eventual growth beyond every prescribed bound.
For example,
means that for every real , there exists such that
The other cases are defined by changing the approach side or requiring .
For the reciprocal function,
By contrast,
In the second example, the two-sided limit is in the extended-real sense, although no finite real limit exists.
Unboundedness alone does not establish an infinite limit. For instance, is unbounded near from the right but tends to neither nor .
Sequential characterization and calculation rules
A right-hand limit equals precisely when, for every sequence of domain points satisfying
the values satisfy
For a left-hand limit, replace by . The input sequence need not be monotone. Finding two sequences approaching from the same side whose function values have different limits proves that the corresponding one-sided limit does not exist.
Finite one-sided limits obey the usual limit laws. If, for a fixed approach side,
then
Also,
The squeeze theorem likewise applies when its inequalities hold sufficiently close to the point on the relevant side.
For a piecewise-defined function, calculation must use the formula that applies on the chosen side. Substitution into an expression valid only on the opposite side gives no information about the required limit.
Continuity and discontinuities
A function is right-continuous at when
and left-continuous when
At an interior point of an interval, a continuous function is both left-continuous and right-continuous. At the left endpoint of a closed interval, continuity relative to the interval requires only right-continuity; at the right endpoint, it requires only left-continuity.
One-sided limits distinguish several kinds of discontinuity:
- Removable discontinuity: both finite one-sided limits agree, but the function value is absent or differs from their common limit.
- Jump discontinuity: both one-sided limits are finite but unequal. The signed jump is .
- Infinite discontinuity: at least one side tends to or .
- Oscillatory discontinuity: at least one side has neither a finite nor an infinite limit because its values continue to oscillate.
Monotone functions
A monotone function on an interval has one-sided limits at every interior point. These limits are finite at interior points for a real-valued monotone function; at endpoints they may be infinite.
For example, if is nondecreasing and is an interior point, then
where ranges over the interval. Moreover,
Consequently, every interior discontinuity of a real-valued monotone function is a jump discontinuity. Such discontinuities form an at most countable set.
Applications
One-sided derivatives
A one-sided derivative is a one-sided limit of a difference quotient:
At an interior point, the ordinary finite derivative exists exactly when these two finite limits exist and agree.
For , the left derivative at is , while the right derivative is . The function is continuous there but not differentiable.
Probability distributions
For a random variable , its cumulative distribution function
is nondecreasing and right-continuous. Its left-hand limit satisfies
Therefore,
A jump in the distribution function records the probability concentrated at that point.
Improper integration
An integral with a singular endpoint is defined through a one-sided limiting process. For example,
provided the integrals on the right exist and the limit is finite. If a singularity lies inside the interval, the integrals on its two sides must converge separately for the ordinary improper integral to exist; cancellation under a coordinated approach is a different notion.