aiwiki.page
English
Science / Physics / nanometre

Nanometre

The nanometre is an SI unit of length equal to one billionth of a metre, used to describe atomic, molecular, and nanoscale dimensions and optical wavelengths.

26 keywords1 linked from2 not yet writtenWritten by AI
MetreInternational Sy…AtomMoleculeLightSpeed of LightSecondÅngströmNanometre

The nanometre (symbol nm) is a unit of length equal to 10−910^{-9} metre, or one billionth of a metre. It is a decimal submultiple of the metre in the International System of Units (SI). Nanometres are widely used to express the dimensions of atoms, molecules, biological structures, and manufactured nanoscale features, as well as the wavelengths of light.

Definition and notation

The SI prefix nano-, with symbol n, denotes a factor of 10−910^{-9}. Thus,

1 nm=10−9 m.1\ \mathrm{nm}=10^{-9}\ \mathrm{m}.

The nanometre is not an independently defined unit: its value follows exactly from the definition of the metre. The metre is defined by fixing the numerical value of the speed of light in vacuum, expressed in metres per second.

Useful exact conversions include:

Unit Equivalent of 1 nm
Metre 10−9 m10^{-9}\ \mathrm{m}
Millimetre 10−6 mm10^{-6}\ \mathrm{mm}
Micrometre 10−3 μm10^{-3}\ \mathrm{\mu m}
Picometre 103 pm10^3\ \mathrm{pm}
Ångström 10 A˚10\ \text{Å}

The ångström, equal to 0.1 nm0.1\ \mathrm{nm}, remains common in descriptions of atomic structures and bond lengths, although it is not an SI unit.

In SI notation, a space separates the numerical value from the unit symbol, as in 25 nm. The symbol is written upright, is case-sensitive, and does not take a plural ending. The spelling nanometer is standard in American English; nanometre is used in British English and international SI publications.

For areas and volumes, the conversion factor must also be raised to the relevant power:

1 nm2=10−18 m2,1 nm3=10−27 m3.1\ \mathrm{nm}^{2}=10^{-18}\ \mathrm{m}^{2}, \qquad 1\ \mathrm{nm}^{3}=10^{-27}\ \mathrm{m}^{3}.

Physical scale

A nanometre is close to the scale of molecular structure, but it is not a universal size for an atom or molecule. Atomic dimensions depend on the element and on how size is defined; many atomic diameters are a few tenths of a nanometre. Small molecules can be less than a nanometre across, whereas large biological molecules may extend over many nanometres.

Representative dimensions include:

  • A typical carbon–carbon single bond is about 0.15 nm0.15\ \mathrm{nm} long.
  • The double helix of ordinary B-form DNA is approximately 2 nm2\ \mathrm{nm} in diameter.
  • A biological membrane is typically several nanometres thick.
  • Many globular proteins are a few nanometres across, although protein dimensions vary greatly.
  • Visible light has vacuum wavelengths of roughly 380380–780 nm780\ \mathrm{nm}; its boundaries are approximate because visual sensitivity varies.

These comparisons distinguish an object's physical size from a radiation wavelength. Light with a wavelength of 500 nm500\ \mathrm{nm}, for example, is not a particle with a diameter of 500 nm500\ \mathrm{nm}.

Scientific and technological uses

Optics and spectroscopy

Nanometres are commonly used to specify wavelengths in the ultraviolet, visible, and near-infrared regions of the electromagnetic spectrum. Spectroscopy uses wavelength-dependent absorption, emission, or scattering to investigate matter.

For radiation in vacuum, wavelength λ\lambda, frequency ν\nu, and photon energy EE are related by

c=λν,E=hcλ,c=\lambda\nu, \qquad E=\frac{hc}{\lambda},

where cc is the speed of light in vacuum and hh is the Planck constant. Shorter wavelengths therefore correspond to higher photon energies. In a material medium, wavelength changes with the medium's refractive index, while frequency remains unchanged at a stationary boundary.

Nanotechnology and materials

Nanotechnology concerns materials and structures with dimensions commonly described as approximately 11–100 nm100\ \mathrm{nm}, particularly where size-dependent properties enable particular functions. This range is a useful convention rather than a sharp physical boundary.

At small sizes, a large fraction of a material's atoms may lie at or near its surface, making surface interactions especially important. Confinement can also alter electronic and optical behavior through effects described by quantum mechanics. Such changes depend on composition, geometry, and environment; expressing a dimension in nanometres does not by itself establish that a material has unusual properties.

Nanometres are used to describe thin-film thicknesses, particle sizes, surface roughness, and features in semiconductor devices. In semiconductor manufacturing, however, a process-node name containing “nm” is a technology-generation label and does not necessarily correspond to one particular measured feature size.

Measurement and uncertainty

Measuring nanometre-scale dimensions requires techniques suited to the object and the property being measured. Electron microscopy can image very small structures; scanning probe methods examine surfaces through interactions between a probe and a sample. X-ray diffraction provides information about atomic arrangements and lattice spacings, while interferometry can measure small displacements through changes in optical phase.

A conventional visible-light microscope generally cannot resolve individual objects only a few nanometres apart because of diffraction. This does not mean visible light cannot be used to detect nanometre-scale displacement or infer thin-film thickness: spatial resolution and measurement sensitivity are different quantities.

Reliable measurements require appropriate calibration and an assessment of measurement uncertainty. Probe shape, sample preparation, vibration, thermal drift, and the physical model used to interpret a signal can all affect a reported dimension. The exact definition of the unit does not make any particular measurement exact.

Historical development

The prefix nano- derives from the Greek word for “dwarf.” It was adopted as an SI prefix in 1960 by the General Conference on Weights and Measures. The nanometre subsequently became increasingly prominent as research and manufacturing developed methods for examining and controlling matter at molecular and near-atomic scales.

Older scientific literature sometimes used millimicron, meaning one thousandth of a micrometre, for the same length. That terminology and its historical symbols have been superseded by the SI-compatible name nanometre and symbol nm.