The mobile phase is the fluid that moves through a chromatographic system and transports the components of a sample through or across a stationary phase. It may be a liquid, a gas, or a supercritical fluid. Separation occurs because sample components differ in their distribution or interactions between the two phases and therefore travel at different rates. The mobile phase is not merely a transport medium: its composition and physical properties can strongly affect retention, selectivity, separation efficiency, and detection.
Role in chromatographic separation
During chromatography, a sample component, or analyte, spends part of its time moving with the mobile phase and part interacting with the stationary phase. These interactions may involve adsorption, partitioning between phases, electrostatic attraction, molecular recognition, or access to pores.
For an idealized system governed by an approximately linear distribution equilibrium, the retention factor can be expressed as
where is the analyte retention time, is the hold-up time of an unretained substance, is the equilibrium distribution coefficient, and and are the stationary- and mobile-phase volumes. This expression assumes that suitable phase volumes and equilibrium concentrations can be defined; some adsorption systems require a different description.
Changing the mobile phase can alter the distribution coefficient and hence retention. Crucially, it may alter different analytes by different amounts, changing selectivity rather than simply speeding up or slowing down the entire separation.
The liquid entering a chromatographic column is commonly called the eluent. The fluid leaving it, including any eluted sample components, is the eluate. These terms describe the fluid’s role or location rather than a separate kind of phase.
Forms of mobile phase
Liquid mobile phases
In liquid chromatography, the mobile phase is a liquid solvent or mixture of solvents, sometimes containing dissolved salts, acids, bases, or other additives. In high-performance liquid chromatography, pumps drive this liquid through a packed column under elevated pressure.
The meaning of a “stronger” mobile phase depends on the separation mode:
- Reversed-phase chromatography: A relatively nonpolar stationary phase is used with a more polar mobile phase, commonly water mixed with methanol or acetonitrile. Increasing the organic-solvent fraction generally reduces retention of neutral hydrophobic analytes.
- Normal-phase chromatography: A polar stationary phase is commonly paired with a relatively nonpolar mobile phase. Increasing the proportion of a polar modifier generally increases elution strength.
- Hydrophilic interaction chromatography: Polar stationary phases are used with mobile phases rich in a water-miscible organic solvent, often acetonitrile. Increasing the water fraction commonly reduces retention, although ionic interactions can complicate this behavior.
- Ion-exchange chromatography: Salt concentration and pH regulate electrostatic interactions between analytes and charged stationary-phase groups.
- Size-exclusion chromatography: Separation ideally depends on differences in access to pores rather than attractive interactions. The mobile phase maintains solubility and helps suppress unwanted adsorption.
Thus, solvent polarity alone does not provide a universal ranking of elution strength.
Gaseous mobile phases
In gas chromatography, the mobile phase is a carrier gas, commonly helium, hydrogen, or nitrogen. Its principal role is to transport vaporized analytes through the column. Retention is governed mainly by analyte volatility, column temperature, and interactions with the stationary phase.
Carrier-gas identity affects diffusion, flow behavior, separation efficiency, and detector compatibility. Unlike solvent composition in liquid chromatography, changing the carrier gas generally has relatively little direct effect on equilibrium selectivity.
Supercritical-fluid mobile phases
In supercritical fluid chromatography, the mobile phase commonly contains pressurized carbon dioxide, often with an organic modifier such as methanol. Depending on composition, pressure, and temperature, practical operating conditions may involve a supercritical or a compressed liquid-like fluid.
Changes in fluid density and modifier content influence solvating power and retention. Consequently, pressure is an important separation variable, not merely the means of driving flow.
Composition and chemical control
Solvent identity and proportions
Solvents differ in polarity, hydrogen-bonding behavior, and other intermolecular interactions. Two solvent mixtures that give similar overall retention can still produce different selectivity. Substituting methanol for acetonitrile, for example, may alter the relative retention or elution order of particular compounds.
Solvent viscosity also matters. For a given packed column and volumetric flow rate, a more viscous mobile phase generally requires a larger pressure drop.
pH and additives
For ionizable analytes, pH changes the balance between charged and uncharged forms. In reversed-phase systems, this can substantially alter retention and peak shape. pH can also affect charged groups on the stationary phase.
A buffer limits pH changes, while dissolved salts influence ionic interactions. The apparent acid–base behavior of compounds changes with solvent composition, so a pH value measured in an aqueous solution is not automatically equivalent to the same numerical reading in a water–organic mixture.
Specialized additives may promote ion pairing, compete for interaction sites, or reduce undesirable adsorption. Such additives can also introduce limitations, including slow equilibration, persistent contamination, or incompatibility with particular detectors.
Isocratic and gradient operation
In isocratic elution, mobile-phase composition remains constant during the separation. This simplifies interpretation and avoids a programmed composition change, but samples containing compounds with widely different retention may produce both poorly retained early peaks and excessively broad late peaks.
In gradient elution, composition changes during the run, usually toward greater elution strength. A reversed-phase gradient commonly increases the organic-solvent fraction. Gradients can separate mixtures spanning a broad retention range within a practical analysis time.
The composition programmed at the pump does not reach the column immediately. The intervening volume creates a gradient delay, making instrument configuration important when transferring methods. After a gradient, the column must return sufficiently close to its initial equilibrium state for subsequent separations to be reproducible.
Flow, efficiency, and detection
Increasing flow usually shortens analysis time, but does not necessarily improve resolution. At low linear velocity, longitudinal diffusion can broaden bands; at high velocity, incomplete mass transfer between phases can become important. These contributions are commonly described by the van Deemter equation. In liquid chromatography, practical flow choices also depend on pressure limits and frictional heating.
The mobile phase must be compatible with the detector:
- Ultraviolet detection requires sufficiently low mobile-phase absorbance at the measurement wavelength.
- Refractive-index detection is highly sensitive to composition changes and is therefore generally unsuitable for conventional solvent gradients.
- Mass spectrometry commonly favors volatile solvents and additives; nonvolatile salts can accumulate in the source and suppress ion signals.
- Evaporative light-scattering and charged-aerosol detectors generally require sufficiently volatile mobile-phase components.
Preparation and reproducibility
Mobile-phase impurities can create background signals, unwanted peaks, or deposits. Dissolved gases may form bubbles that disturb pumping or detection, while suspended particles can obstruct flow paths. Solvent purity, filtration where appropriate, and degassing therefore affect analytical performance.
Solubility must be maintained throughout the separation. A salt soluble in an aqueous starting mixture may precipitate as the organic-solvent fraction increases, and an injected sample may precipitate if its solvent is incompatible with the mobile phase.
Reproducible methods specify solvent identities, mixture proportions, additive concentrations, pH preparation and measurement conventions, flow rate, temperature, and any gradient program. Composition notation matters: a mixture prepared from separately measured solvent volumes is not necessarily identical to one prepared by dilution to a specified final volume, because mixing can change total volume.