Magnesia, commonly called magnesium oxide, is an inorganic compound with the formula . It is a white solid composed of magnesium and oxygen, occurring naturally as the mineral periclase. Its high melting point, basic chemical character, and electrical insulating properties make it important in furnace linings, heating elements, construction materials, and chemical processing. Commercial grades differ substantially in reactivity because their properties depend on the raw material and the temperature and duration of heat treatment.
Composition and crystal structure
Magnesium oxide consists predominantly of magnesium ions, , and oxide ions, , held together by ionic bonding. Under ordinary conditions it has the rock-salt crystal structure: each magnesium ion is surrounded by six oxide ions, and each oxide ion by six magnesium ions. Its cubic unit cell contains four MgO formula units.
Representative properties of relatively pure, dense MgO include:
| Property | Approximate value or description |
|---|---|
| Formula | |
| [[molar-mass | Molar mass]] |
| Appearance | White powder; colorless crystals when pure |
| [[density | Density]] at room temperature |
| Melting point | About |
| Electrical behavior | Strong insulator under ordinary conditions |
| Behavior in water | Sparingly soluble; reacts to form magnesium hydroxide |
Bulk MgO has a wide band gap of approximately . Its electrical and optical behavior can nevertheless change with impurities, crystal defects, and temperature. Porous commercial powders also have bulk densities much lower than the density of the crystalline solid.
Chemical behavior
Magnesia is a basic oxide. It undergoes an acid–base reaction with acids to form magnesium salts and water. For example, with hydrochloric acid:
It reacts with water to form magnesium hydroxide:
This hydration reaction releases heat and increases the solid volume. Its rate varies greatly with surface area, crystal size, impurities, and previous heat treatment. Finely divided, lightly calcined material can hydrate much more readily than dense, high-temperature-fired magnesia.
Exposure to moist air can also cause gradual reaction with carbon dioxide, producing magnesium carbonate or hydrated carbonate phases. Although the overall carbonation process is sometimes represented as
actual products and reaction rates depend on humidity, temperature, and processing conditions. The simple equation does not imply rapid, complete conversion under ordinary atmospheric conditions.
At high temperatures, MgO reacts with many acidic oxides. Its compatibility with basic environments, rather than universal chemical inertness, explains much of its value as a refractory.
Natural occurrence and manufacture
Natural periclase occurs particularly in some metamorphosed carbonate rocks. Because it can hydrate to magnesium hydroxide, known mineralogically as brucite, it is less persistent in wet near-surface environments than many other rock-forming minerals.
Industrial magnesia is commonly manufactured from magnesite, a magnesium carbonate mineral, by calcination:
Magnesium hydroxide obtained from seawater or magnesium-rich brines is another important feedstock. Dissolved magnesium is precipitated as the hydroxide, which is separated, washed, and heated:
Dolomite, a calcium–magnesium carbonate mineral, is also a source of magnesium-bearing materials. Direct calcination produces both calcium oxide and magnesium oxide rather than pure MgO.
The source material and manufacturing route affect purity. Calcium, silicon, iron, and boron compounds are among the impurities that can influence refractory performance, hydration behavior, and suitability for electrical applications.
Commercial grades
Commercial magnesia is often distinguished by its heat treatment:
- Light-burned or caustic-calcined magnesia is produced at comparatively low calcination temperatures, commonly around –. It generally retains a relatively large reactive surface and is used in chemical processing, environmental treatment, agriculture, and some binders.
- Hard-burned magnesia receives more severe heat treatment and generally hydrates more slowly. It is used where controlled reactivity is important.
- Dead-burned or sintered magnesia is fired at much higher temperatures, commonly around –. Sintering produces larger crystals and denser material with low hydration reactivity, suitable for refractories.
- Fused magnesia is produced by melting and resolidifying a magnesium-bearing feedstock, often in an electric furnace. It can provide large crystals and grades suited to demanding refractory and electrical uses.
These names describe processing and performance rather than different chemical compounds. Temperature ranges overlap among manufacturers.
Applications
Refractories and metallurgy
The largest industrial use of magnesia is in refractory materials that withstand high temperatures. Magnesia-based bricks and other lining materials are used in steelmaking furnaces, ladles, and cement kilns.
MgO is especially useful where the lining encounters basic slags. Magnesia–carbon bricks combine its high-temperature chemical resistance with properties contributed by graphite, including improved resistance to thermal shock and slag penetration.
Performance depends on more than melting point. Porosity, grain size, impurities, bonding phases, and the chemistry of the contacting slag all affect service life. MgO can react with silica-rich materials, so it is not equally suitable for every furnace environment.
Electrical insulation and ceramics
Compacted MgO powder electrically separates the resistance wire from the surrounding metal sheath in many tubular heating elements. It combines high electrical resistance with useful thermal conductivity, allowing heat to pass outward while limiting electrical leakage.
Moisture absorption can reduce insulation resistance, making drying and sealing important features of these components. MgO is also used in ceramic substrates, crucibles, and specialized optical materials.
Construction materials
Magnesia is a component of several cement systems. In magnesium oxychloride cement, reactive MgO combines with magnesium chloride and water to form binding phases. Magnesium oxysulfate and magnesium phosphate cements use different salts and reaction products.
These binders are not interchangeable with conventional Portland cement. Their strength development, moisture resistance, dimensional stability, and compatibility with metals depend on formulation and curing conditions. Some magnesium oxychloride products are vulnerable to prolonged water exposure, while chloride-containing formulations can create corrosion concerns.
Carbonation-based magnesium binders are also studied as materials that absorb carbon dioxide during hardening. Their net climate impact depends on the entire production process, including feedstock, calcination emissions, energy supply, and the extent of carbonation.
Chemical, environmental, and biological uses
Reactive magnesia is used to neutralize acidic streams, adjust pH, and assist the removal of certain dissolved metals by precipitation. Its comparatively slow dissolution can be useful where gradual alkalinity release is desired.
It also supplies magnesium in some fertilizers, animal feeds, and industrial formulations. Suitable pharmaceutical grades are used in certain antacid and laxative products and as sources of supplemental magnesium. These uses involve purity and formulation requirements distinct from those of industrial-grade material.
Limitations and handling considerations
Magnesia dust can irritate the eyes and respiratory tract. Fine magnesium oxide fume generated during high-temperature processes, including the burning of magnesium metal, can cause metal fume fever after inhalation.
Hydration is an important engineering limitation. Because conversion to magnesium hydroxide increases volume, uncontrolled moisture exposure can damage stored refractory materials or cause expansion in a hardened product. In some construction formulations, controlled hydration and expansion are intentional; in others, they are undesirable.
Manufacturing also has environmental costs. Calcining magnesium carbonate releases carbon dioxide from the mineral itself, while high-temperature processing requires substantial energy. Later carbonation may recapture some carbon dioxide in particular applications, but this does not by itself establish that a magnesia product has low or negative life-cycle emissions.