Joseph Black (16 April 1728 – 6 December 1799) was a Scottish physician, chemist, and university teacher known for identifying “fixed air,” now called carbon dioxide, and for establishing the concepts of latent heat and specific heat. His experiments helped distinguish gases as chemically different substances and clarified the difference between heat and temperature. Through his research and teaching at Glasgow and Edinburgh, he contributed to the development of quantitative chemistry and the experimental foundations of thermodynamics.
Early life and academic career
Black was born in Bordeaux, France, into a family of Scottish and Irish background. His father was a wine merchant. He entered the University of Glasgow in 1746, where he studied medicine and worked with William Cullen, whose teaching encouraged his interest in chemical experimentation.
In 1752, Black moved to the University of Edinburgh to continue his medical studies. He received his medical degree in 1754 with a dissertation on magnesia alba, a medicinal substance consisting chiefly of basic magnesium carbonate. Research associated with this dissertation became the basis of his principal contribution to the chemistry of gases.
In 1756, Black succeeded Cullen at Glasgow, initially as professor of medicine, and subsequently held the chair of the practice of medicine. His duties included teaching chemistry. In 1766, he returned to Edinburgh as professor of medicine and chemistry, a position he retained until his death. Although he maintained a medical practice, his lasting influence came principally from chemical research and university teaching.
Fixed air and the chemistry of gases
Experiments on magnesia and lime
Black investigated the differences between magnesia alba and limestone, substances that could appear similar but behaved differently in chemical processes. By weighing materials before and after heating and examining their reactions with acids, he showed that their transformations involved the loss or absorption of a gaseous substance.
He called this substance “fixed air” because it could be held, or fixed, within solid materials and then released. In modern terms, heating calcium carbonate produces calcium oxide and carbon dioxide:
This equation is a modern representation, not Black’s own notation. His work preceded modern chemical formulas and the later explanation of carbon dioxide as a compound of carbon and oxygen.
Black showed that fixed air differed from ordinary atmospheric air. It did not support a flame and could be detected by its ability to turn limewater cloudy, through the formation of calcium carbonate. He also recognized its presence in exhaled air and in gases produced by fermentation.
His findings appeared in the paper Experiments upon Magnesia Alba, Quicklime, and Some Other Alcaline Substances, published in 1756.
Why the discovery mattered
Before the development of gas chemistry, air was often treated as a single substance, although earlier investigators had already described various “airs.” Black’s contribution was therefore not the first observation of a gas distinct from ordinary air. Its importance lay in the systematic demonstration that a particular gas had reproducible chemical properties and could participate in transformations between solids and gases.
His experiments also challenged the view that the caustic character of quicklime resulted from the addition of a fiery principle during heating. Black instead explained the change through the removal of fixed air from limestone. Restoring fixed air reversed the transformation.
This approach made weighing central to chemical explanation. A loss in the mass of a solid could be connected with the escape of a gas rather than treated as an incidental effect. Black’s work helped establish the experimental tradition later developed by pneumatic chemists and by Antoine Lavoisier. It did not itself provide the later oxygen-based account of combustion.
Heat, temperature, and changes of state
Distinguishing heat from temperature
Black’s thermal investigations showed that a thermometer reading does not measure the total quantity of heat transferred to a substance. Equal masses of different materials can require different quantities of heat to undergo the same temperature rise.
This distinction led to the concept of specific heat capacity: the heat required per unit mass for a specified increase in temperature. In modern notation, when the specific heat capacity is approximately constant and no change of state occurs,
where is the heat transferred, is mass, is specific heat capacity, and is the temperature change.
The related quantity heat capacity describes the heat required to change the temperature of an entire body rather than a unit mass. Black did not use the modern energy-based framework, but his experiments helped establish the measurable distinctions on which that framework rests.
Latent heat
During his Glasgow years, Black investigated melting ice and boiling water. He recognized that heat could be supplied without producing a corresponding increase in temperature.
When ice melts under approximately constant pressure, the mixture remains near its melting temperature while heat continues to enter it. Similarly, boiling water can absorb heat while its temperature remains approximately constant, with the supplied heat converting liquid into vapour.
Black called the heat involved “latent,” meaning hidden, because its transfer was not revealed by a temperature rise. In modern notation,
where is the specific latent heat of the relevant phase transition.
His work also showed that the reverse transformations release heat: freezing water and condensing steam give heat to their surroundings. These observations were important to the development of calorimetry, the measurement of heat transfer.
Black’s account should not be confused with modern molecular explanations. Thermodynamics and the kinetic theory of matter were developed later, and eighteenth-century investigators debated the physical nature of heat. The enduring achievement was his experimental separation of temperature change from heat absorbed or released during a change of state.
Relationship with James Watt
At Glasgow, Black became a friend and supporter of James Watt, who worked as a mathematical instrument maker at the university. Watt was investigating the performance of steam engines, particularly the large expenditure of heat involved in repeatedly heating and cooling an engine cylinder.
Black’s teaching on latent heat formed part of the scientific setting in which Watt worked. The large quantity of heat released during condensation helped explain the thermal behaviour of steam and the losses associated with cooling a cylinder.
The relationship is sometimes simplified into a claim that Black’s discovery directly produced Watt’s separate condenser. That account overstates what can be established. Watt’s innovation also depended on his own experiments, measurements, and practical engineering analysis. Black supplied scientific discussion, encouragement, and financial assistance, but should not be credited as the inventor of Watt’s engine improvements.
Teaching and scientific legacy
Black published relatively little compared with the scale of his reputation. Much of his work on heat circulated through lectures, students’ notes, and personal communication rather than through a sequence of research papers.
At Edinburgh, he became an influential chemistry lecturer. His courses combined demonstrations, quantitative reasoning, and explanations accessible to medical students and others without extensive chemical training. Students carried his methods and ideas into medicine, industry, and scientific research.
After his death, John Robison edited and published Lectures on the Elements of Chemistry in 1803, drawing on Black’s lecture materials. This work preserved much of his teaching, although a posthumously edited lecture collection is not equivalent to a treatise prepared by Black himself for publication.
Black’s principal contributions belong to two closely connected developments: the recognition that gases could be distinct chemical substances, and the recognition that heat transfer could not be inferred from temperature change alone. Both depended on carefully controlled experiments and quantitative comparisons rather than on a fully developed theory of matter or energy.