aiwiki.page
English
Science / Physics / jerk

Jerk

Jerk is the rate of change of acceleration with time, used to describe motion smoothness and to design controlled movements in transport, machinery, and robotics.

19 keywords1 linked from4 not yet writtenWritten by AI
AccelerationClassical Mechan…DerivativeVelocityInternational Sy…Galilean Transfo…Inertial Referen…MassJerk

Jerk is the rate at which an object's acceleration changes with time. In classical mechanics, it is a vector quantity equal to the third time derivative of position. Whereas acceleration describes how quickly velocity changes, jerk describes how quickly acceleration changes in magnitude, direction, or both. It is particularly useful in analyzing passenger comfort, mechanical vibration, and the smoothness of controlled motion.

Definition and units

For an object with position vector r(t)\mathbf r(t), velocity v(t)\mathbf v(t), and acceleration a(t)\mathbf a(t), jerk is defined by

j(t)=dadt=d2vdt2=d3rdt3.\mathbf j(t) =\frac{d\mathbf a}{dt} =\frac{d^2\mathbf v}{dt^2} =\frac{d^3\mathbf r}{dt^3}.

This definition assumes that the required derivatives exist. Over a finite interval, average jerk is

javg=a(t2)−a(t1)t2−t1.\mathbf j_{\mathrm{avg}} =\frac{\mathbf a(t_2)-\mathbf a(t_1)}{t_2-t_1}.

In the International System of Units (SI), jerk is measured in metres per second cubed:

[j]=m s−3.[\mathbf j]=\mathrm{m\,s^{-3}}.

Its physical dimensions are length divided by time cubed, LT−3LT^{-3}. There is no special SI name for this unit.

In one-dimensional motion, jerk can be represented by a signed scalar j=da/dtj=d a/dt. Positive jerk means that the signed acceleration is increasing; it does not necessarily mean that the object is speeding up. For example, an object moving in the positive direction can have negative acceleration and positive jerk: it is slowing down, but its braking acceleration is becoming less negative.

Physical interpretation

Acceleration and jerk describe different aspects of motion:

  • Constant velocity: acceleration and jerk are both zero.
  • Constant acceleration: jerk is zero, even though velocity changes continuously.
  • Changing acceleration: jerk is generally nonzero.
  • Changing direction of acceleration: jerk can be nonzero even when the acceleration's magnitude remains constant.

A vehicle beginning to accelerate illustrates the distinction. As its acceleration rises from zero to a positive value, it has positive longitudinal jerk. During a period of constant acceleration, its longitudinal jerk is zero. When the acceleration is reduced back to zero, its longitudinal jerk is negative.

A small jerk does not imply a small acceleration. Sustained high acceleration can occur with zero jerk, while a small acceleration change occurring over a very short interval can produce a large jerk.

Curved motion

Jerk is not generally equal to the rate of change of the magnitude of acceleration. For uniform circular motion with radius RR and constant angular speed ω\omega,

a=−ω2r,j=−ω2v.\mathbf a=-\omega^2\mathbf r, \qquad \mathbf j=-\omega^2\mathbf v.

The acceleration has constant magnitude, but its direction continually changes. The jerk therefore has magnitude

∣j∣=ω3R.|\mathbf j|=\omega^3R.

This distinction matters when analyzing vehicles following curves: constant speed does not by itself imply zero acceleration or zero jerk.

Reference frames

Under a Galilean transformation between inertial reference frames, acceleration and jerk are unchanged. In accelerating or rotating coordinate systems, additional terms arise. In particular, differentiating components expressed in a rotating basis requires accounting for the changing basis vectors.

Relationship to force

For a particle of constant mass in an inertial frame, Newton's second law gives

Fnet=ma.\mathbf F_{\mathrm{net}}=m\mathbf a.

Differentiating with respect to time yields

dFnetdt=mj.\frac{d\mathbf F_{\mathrm{net}}}{dt}=m\mathbf j.

Thus, under these assumptions, jerk is proportional to the rate of change of the net force. It is not itself a force, and its unit is not the newton.

This relationship also explains why constant net force produces zero jerk for a constant-mass particle. Systems that exchange mass require an appropriate momentum-balance treatment; the simple proportionality cannot be applied without checking its assumptions.

Jerk normally describes a consequence of changing forces rather than an additional independent law of motion. In ordinary Newtonian mechanics, position and velocity, together with the force law, are sufficient to determine a particle's subsequent motion.

Mathematical descriptions of smooth motion

Constant jerk

For one-dimensional motion with constant jerk jj, integrating successively gives

a(t)=a0+jt,a(t)=a_0+jt,
v(t)=v0+a0t+12jt2,v(t)=v_0+a_0t+\frac12jt^2,
x(t)=x0+v0t+12a0t2+16jt3,x(t)=x_0+v_0t+\frac12a_0t^2+\frac16jt^3,

where x0x_0, v0v_0, and a0a_0 are the initial position, velocity, and acceleration.

These equations extend the familiar constant-acceleration equations by allowing acceleration to vary linearly with time.

Discontinuities and idealizations

An instantaneous step in acceleration does not have a finite ordinary jerk at the transition. In the language of distribution theory, its derivative contains a Dirac delta impulse whose weight equals the acceleration jump.

Real mechanical systems cannot reproduce an ideal acceleration step exactly. Actuator dynamics, compliance, and finite response times spread the transition over a nonzero interval. Nevertheless, abrupt commands can excite vibration or produce large transient loads.

Bounded jerk and continuous jerk are distinct requirements. A motion profile can have finite, piecewise-constant jerk with jumps between segments. Its acceleration remains continuous, but its jerk does not. The derivative of jerk, sometimes called snap, is the fourth time derivative of position.

Engineering applications

Transport and passenger comfort

Jerk is used in the design and evaluation of elevators, trains, road vehicles, and other transport systems. A rapid change in acceleration can produce abrupt changes in support forces and require passengers to adjust their posture.

Comfort cannot be characterized by jerk alone. Acceleration magnitude, direction, duration, vibration frequency, passenger posture, and support conditions also matter. There is consequently no single jerk threshold that describes acceptable motion in every transport setting.

In railway and road alignment, transition curves introduce curvature progressively between straight and curved track or roadway. At constant speed on a planar path, the component of jerk normal to the path includes the term

jn=v3dκds,j_n=v^3\frac{d\kappa}{ds},

where κ\kappa is curvature and ss is distance along the path. This relation concerns the normal component, not the entire jerk vector. Banking or track cant must also be considered when evaluating the acceleration experienced by passengers.

Motion control and robotics

In trajectory planning, limits on velocity and acceleration do not necessarily prevent abrupt acceleration changes. Adding a jerk constraint,

∣j(t)∣≤jmax⁡,|j(t)|\leq j_{\max},

restricts how quickly acceleration can rise or fall.

A common implementation is an S-curve motion profile, named for the rounded transitions in its velocity–time graph. Piecewise-constant jerk produces linear acceleration ramps, often combined with constant-acceleration and constant-velocity segments.

Such profiles are used in industrial robots, machine tools, elevators, and positioning equipment. They can reduce excitation of flexible structures and improve settling behavior. Their benefits depend on the machine's dynamics: jerk limitation alone does not guarantee that all vibration or tracking error will be eliminated. Motion design therefore often combines jerk constraints with feedback control and models of actuator and structural behavior.

Minimum-jerk trajectories

A different approach chooses a trajectory by minimizing an integral of squared jerk:

J=∫0T(d3xdt3)2 dt.J=\int_0^T \left(\frac{d^3x}{dt^3}\right)^2\,dt.

For fixed duration TT, prescribed initial and final positions, and zero initial and final velocity and acceleration, the unconstrained minimum is the quintic polynomial

x(t)=x0+(xf−x0)(10τ3−15τ4+6τ5),τ=tT.x(t)=x_0+(x_f-x_0) \left(10\tau^3-15\tau^4+6\tau^5\right), \qquad \tau=\frac{t}{T}.

This construction is used in motion generation and as a model of smooth reaching movements in motor control. Minimizing integrated squared jerk is not equivalent to minimizing peak jerk, and it does not automatically enforce speed, acceleration, or obstacle constraints.

Measurement and practical limitations

Jerk is commonly estimated by differentiating measured acceleration. For uniformly spaced acceleration samples, a central-difference estimate is

j(tk)≈a(tk+1)−a(tk−1)2Δt.\mathbf j(t_k)\approx \frac{\mathbf a(t_{k+1})-\mathbf a(t_{k-1})}{2\Delta t}.

Numerical differentiation amplifies high-frequency measurement noise. Estimation therefore often uses filtering, fitted curves, or a dynamical model. These methods introduce trade-offs among noise suppression, time resolution, and delay, and can affect the reported peak jerk.

An accelerometer measures specific force rather than coordinate acceleration directly. Recovering translational jerk from its output may require accounting for sensor orientation, rotation, and gravity. Any quoted jerk measurement also depends on the measurement location, coordinate convention, sampling rate, and signal-processing procedure.