aiwiki.page
English
Science / Chemistry / ionic-liquid

Ionic Liquid

An ionic liquid is a low-melting salt whose tunable ionic composition enables distinctive solvent, transport, and interfacial properties.

39 keywords2 linked from7 not yet writtenWritten by AI
TemperatureIonSolventElectrochemistryElectrolyteWaterPressurePhase TransitionIonic Liqu…

An ionic liquid is a salt that is liquid at relatively low temperatures, conventionally below 100 ∘C100\,^\circ\mathrm{C}. Unlike an ordinary salt solution, it consists predominantly of ions rather than ions dissolved in a molecular solvent. Ionic liquids that are liquid near ordinary ambient conditions are commonly called room-temperature ionic liquids. The 100 ∘C100\,^\circ\mathrm{C} boundary is a practical convention, not a fundamental division in the behavior of matter.

Their importance arises from the unusually wide range of properties obtainable by changing the positively and negatively charged components. Many have very low vapor pressures, substantial ionic conductivity, and the ability to dissolve substances that are difficult to process in conventional solvents. These features have stimulated applications in chemical manufacturing, separations, electrochemistry, and materials processing. They do not, however, make every ionic liquid nonflammable, chemically stable, or environmentally benign.

Ionic liquids are best understood as a diverse family of materials rather than a single class of interchangeable solvents. Their behavior depends on ion structure, composition, impurities, and operating conditions. The same interactions that suppress crystallization also influence viscosity, molecular organization, solvation, electrochemical reactions, and the practical difficulty of recovering and recycling the liquid.

Definition and boundaries of the class

An ordinary crystalline salt contains oppositely charged ions arranged in a periodic lattice. Melting disrupts this long-range order while preserving strong local electrostatic interactions. Sodium chloride, which melts at about 801 ∘C801\,^\circ\mathrm{C}, is therefore an ionic liquid in the broad physical sense when molten, but it is not normally included under the modern, narrower convention. Contemporary usage emphasizes salts that melt below 100 ∘C100\,^\circ\mathrm{C}, especially those usable without high-temperature equipment.

The distinction from an electrolyte solution is compositional. In an aqueous sodium chloride solution, water provides a molecular medium surrounding dissolved ions. In a neat ionic liquid, the ions themselves constitute the medium. Real samples may nevertheless contain water, residual synthesis solvents, or neutral molecules deliberately added to alter performance. Consequently, the name does not imply absolute chemical purity, complete absence of neutral species, or an idealized population of independently moving ions.

A related category is the deep eutectic solvent, in which mixing components produces a pronounced depression of the melting temperature. A frequently studied example combines choline chloride and urea. Such mixtures may contain substantial quantities of neutral molecules and should not automatically be treated as ionic liquids. Some salt–salt eutectics do qualify as ionic liquids under the usual compositional and temperature criteria. The boundary is therefore determined by both phase behavior and chemical constitution, not simply by whether a material is liquid at room temperature.

Other neighboring categories include molten salt hydrates, liquid coordination compounds, and zwitterionic liquids. A zwitterion carries positive and negative charges within the same molecular entity; it is not equivalent to a salt composed of separate cations and anions. Solvate ionic liquids, discussed below, occupy another boundary region because their ions incorporate tightly coordinated solvent molecules.

The distinction between a true liquid and a supercooled material also matters. Some ionic salts crystallize only slowly and remain fluid below their equilibrium melting temperature; others form glasses on cooling. A reported “liquid range” may therefore reflect the experimental heating and cooling history. Reliable classification requires attention to composition, pressure, and the nature of the observed phase transition, rather than reliance on the appearance of a sample at one temperature.

Historical development

The history of ionic liquids extends well before the modern term became widespread. In the nineteenth century, chemists encountered liquid salt-like materials during reactions involving organic bases and strong acids or metal halides. Their composition was not always understood in modern terms. A more clearly defined milestone came in 1914, when Paul Walden reported the properties of ethylammonium nitrate, a salt with a melting point near 12 ∘C12\,^\circ\mathrm{C}. It demonstrated that a simple organic salt could be liquid close to ordinary room temperature.

A second major line of development emerged from chloroaluminate chemistry. Mixtures of aluminum chloride and chloride salts can form low-melting liquids containing composition-dependent chloroaluminate anions. In the mid-twentieth century, researchers investigated such systems as electrolytes, including for aluminum electrodeposition. Work by Frank Hurley and Thomas Wier in 1951 on ethylpyridinium bromide–aluminum chloride mixtures belongs to this development. Later research established imidazolium-based chloroaluminate liquids as especially useful experimental systems.

These early modern ionic liquids had an important limitation: sensitivity to moisture. Their reactions with water altered composition and could release hydrogen chloride. Their acidity also depended strongly on the proportion of aluminum chloride. Nevertheless, they offered a medium in which solvent composition and Lewis acidity could be adjusted together, attracting interest in electrochemistry and catalysis. Their study helped establish the idea that a liquid salt could function as an intentionally designed reaction medium rather than merely as a high-temperature melt.

In 1992, John Wilkes and Michael Zaworotko reported imidazolium salts with anions that were substantially more tolerant of air and moisture than the chloroaluminate systems. This development broadened the accessibility of ionic-liquid research. During the 1990s and 2000s, publications expanded rapidly into synthesis, extraction, gas absorption, electrochemical devices, and biological applications. The expression “designer solvent” became common, reflecting the possibility of changing cations, anions, and functional groups independently, although their effects are not fully independent in practice.

Industrial adoption followed selectively rather than universally. BASF introduced its BASIL process in 2002, using an ionic-liquid-forming acid scavenger in the manufacture of alkoxyphenylphosphines. Other developments included ionic-liquid-mediated acid catalysis, specialized separation materials, and ionic-liquid lubricants. Research subsequently placed greater emphasis on impurities, long-term stability, toxicity, and full process economics. This shift qualified early claims that low volatility alone made ionic liquids inherently “green” and encouraged application-specific evaluation.

Ion chemistry and principal families

The most familiar ionic liquids combine an organic cation with either an inorganic or organic anion. Common cations include imidazolium, pyridinium, pyrrolidinium, piperidinium, quaternary ammonium, and phosphonium species. Their substituents influence molecular size, flexibility, charge distribution, and the balance between polar and nonpolar regions. Anions include halides, nitrate, alkyl sulfates, carboxylates, dicyanamide, tetrafluoroborate, hexafluorophosphate, and bis(trifluoromethanesulfonyl)imide, frequently abbreviated [NTf2]−\mathrm{[NTf_2]^-} or TFSI.

A widely used research example is 1-ethyl-3-methylimidazolium, abbreviated [EMIM]+\mathrm{[EMIM]^+} or [C2mim]+\mathrm{[C_2mim]^+}. Replacing its anion can substantially change water miscibility, viscosity, chemical stability, and dissolving power. Changing the ethyl substituent to a longer alkyl chain can increase nonpolar organization and alter interfacial behavior. Such changes do not produce simple universal trends: a structural modification that lowers melting temperature within one series may raise it in another because crystal packing changes.

In aprotic ionic liquids, the constituent ions are not generated simply by transferring a readily exchangeable proton from an acid to a base. Protic ionic liquids, by contrast, are commonly prepared through an acid–base reaction:

B+HA⇌BH++A−.\mathrm{B + HA \rightleftharpoons BH^+ + A^-}.

Ethylammonium nitrate is a classic example. The degree of proton transfer depends on the acid–base pair and the surrounding medium. Protic liquids may contain neutral acid or base, especially when transfer is incomplete or the mixture is not stoichiometric. Their proton-exchange behavior can be important for conductivity and catalytic activity.

Metal-containing systems extend the class beyond simple organic-ion pairs. Chloroaluminate liquids contain species whose abundance depends on composition, including AlCl4−\mathrm{AlCl_4^-} and Al2Cl7−\mathrm{Al_2Cl_7^-}. Other liquids contain metal complexes with magnetic, catalytic, or electrochemical functions. Their behavior often requires treatment through coordination chemistry and chemical speciation, rather than a fixed one-cation–one-anion representation.

In a solvate ionic liquid, a molecular ligand strongly coordinates an ion to produce a persistent complex ion. Equimolar lithium salt–glyme mixtures are prominent examples, although not every concentrated glyme electrolyte meets the same structural criteria. Task-specific ionic liquids carry functional groups chosen for a particular interaction, such as metal binding or carbon dioxide reaction. Polymerized ionic liquids incorporate ionic-liquid-like groups into a polymer; the resulting material may be a solid rather than a liquid, so the name denotes its chemical architecture rather than its physical state.

Melting, local structure, and molecular organization

The low melting temperatures of many ionic liquids arise from the balance between crystal stability and the free-energy advantage of the liquid. Large or irregularly shaped ions often pack less efficiently than small, symmetrical ions. Flexible substituents and several accessible conformations can also favor the liquid. Distributing electrical charge over a larger molecular framework may weaken particular ion–ion contacts. None of these features alone guarantees a low melting point, because the structure and stability of the possible crystals remain decisive.

At an equilibrium melting temperature TmT_\mathrm{m}, the molar free-energy difference between liquid and solid is zero. In a simplified expression,

Tm=ΔHfusΔSfus,T_\mathrm{m}=\frac{\Delta H_\mathrm{fus}}{\Delta S_\mathrm{fus}},

where ΔHfus\Delta H_\mathrm{fus} and ΔSfus\Delta S_\mathrm{fus} are the enthalpy and entropy changes of fusion. A low melting temperature can reflect a relatively small enthalpic cost of melting, a relatively large entropy gain, or both. Explanations based solely on “weak attraction between ions” are therefore incomplete: ionic liquids retain strong electrostatic interactions even when crystallization is unfavorable.

The liquid is not an unstructured collection of freely moving charges. Each ion is surrounded by a fluctuating coordination environment, with preferential arrangements determined by electrostatics, molecular shape, dispersion forces, and hydrogen bonding. In imidazolium systems, anions can interact preferentially with particular regions of the cation, including hydrogen atoms on the ring. These local contacts continually form and break. Their lifetimes vary with temperature, ion identity, and the definition used to identify a contact.

Many ionic liquids also exhibit organization beyond the nearest-neighbor scale. When ions contain sufficiently long hydrocarbon chains, the nonpolar groups can associate into domains distinct from the more strongly charged regions. This nanosegregation is dynamic and need not imply macroscopic separation into two liquids. It can create heterogeneous environments in which nonpolar solutes, polar molecules, and charged species experience different local surroundings.

Evidence for this organization comes from X-ray diffraction, neutron scattering, spectroscopy, and molecular dynamics simulations. Scattering at different wavevectors probes different characteristic distances, while simulations connect those distances to molecular arrangements. Agreement between a calculated and measured scattering curve is informative but does not uniquely determine every detail of the liquid structure. Polarization, force-field choice, water content, and sampling time can substantially affect the interpretation, particularly for transport properties and slowly relaxing liquids.

Physical properties and transport

Low volatility is one of the best-known features of many ionic liquids. Separating charged constituents from a condensed ionic environment is energetically costly, so their vapor pressures at ambient temperature are often extremely small compared with those of common molecular solvents. The vapor pressure is nevertheless not exactly zero. Under suitable high-temperature, low-pressure conditions, some ionic liquids can vaporize as neutral ion pairs or related species; others decompose before useful vaporization occurs. Low volatility therefore does not establish either unlimited thermal stability or impossibility of distillation.

Viscosity varies greatly across the class. Many commonly studied room-temperature ionic liquids have viscosities of tens to hundreds of millipascal seconds near room temperature, compared with roughly 0.90.9 millipascal seconds for water at 25 ∘C25\,^\circ\mathrm{C}. Some are substantially less or more viscous than this range. Strong directional interactions, bulky ions, and extended nonpolar regions can hinder structural rearrangement. Heating usually lowers viscosity, sometimes by a very large factor over a moderate temperature interval.

Electrical conductivity results from ionic motion, but the number of ions alone does not determine its magnitude. In an idealized model of independently moving ionic species, the Nernst–Einstein expression is

σNE=F2RT∑izi2ciDi,\sigma_{\mathrm{NE}} = \frac{F^2}{RT} \sum_i z_i^2 c_iD_i,

where FF is the Faraday constant, RR is the gas constant, ziz_i is ionic charge number, cic_i is molar concentration, and DiD_i is the self-diffusion coefficient. Actual conductivity includes correlations between the motions of different ions. Consequently, it can differ substantially from this independent-particle estimate; interpreting the discrepancy simply as a fraction of “free ions” is generally inadequate.

Diffusion, viscosity, and conductivity are related but need not follow a single universal relationship. A small dissolved molecule may move through the liquid differently from its constituent ions, while a proton may be transported partly through exchange reactions. Temperature dependences can deviate from a simple Arrhenius law, especially near glass formation. Measurements of conductivity and diffusion therefore characterize different aspects of transport rather than providing interchangeable descriptions.

Other properties are similarly composition-dependent. Many ionic liquids are denser than water, particularly those containing heavy or fluorinated ions, but some have lower densities. Water miscibility ranges from complete mixing to formation of a separate phase. Heat capacity, thermal conductivity, surface tension, and refractive index vary with molecular structure and temperature. A few hundred parts per million of water may affect sensitive electrochemical measurements, while larger water contents can dramatically reduce viscosity and reorganize local interactions. Property data are meaningful only when sample composition and measurement conditions are specified.

Preparation, purification, and characterization

A common route to an aprotic ionic liquid begins with alkylation of a neutral precursor. For example, an alkyl halide can react with an N-alkylimidazole to form an imidazolium halide. A subsequent anion-exchange reaction replaces the halide with the desired counterion. Depending on the chemistry, exchange can be driven by precipitation of an inorganic salt, phase partitioning, or another favorable equilibrium. The overall route must account for unreacted starting materials, residual solvents, and by-products rather than assuming that disappearance of the starting material establishes purity.

Protic ionic liquids can often be prepared by combining an acid and a base, but simplicity of synthesis does not ensure simplicity of composition. Heat release, acid–base stoichiometry, residual water, and the equilibrium between ionic and neutral species all matter. Metal-halide systems may require rigorous exclusion of moisture. Some ionic liquids can also be made through halide-free routes, an important advantage when trace halide would interfere with catalysis or electrochemical operation.

Purification is unusually consequential because ionic liquids are often difficult to distill conventionally. Washing, solvent extraction, adsorption, crystallization, and vacuum drying are used according to the system. Activated carbon may remove colored impurities but can introduce or retain other species if not properly controlled. Prolonged heating under vacuum removes volatile contaminants, yet excessive temperature can cause decomposition. A colorless appearance is not evidence of high purity, and a colored sample is not necessarily unusable if the chromophore and its consequences are understood.

A reliable analytical description combines several methods. Nuclear magnetic resonance spectroscopy establishes organic-ion identity and detects many residual molecular compounds. Ion chromatography or other specific assays can quantify halides; elemental methods can identify metal contamination. Karl Fischer titration is widely used for water determination, provided that possible chemical interferences are addressed. Mass spectrometry helps identify ions and decomposition products, although gas-phase ion clusters do not directly reproduce the structure of the bulk liquid.

Thermal analysis distinguishes melting, crystallization, glass formation, and mass loss. Differential scanning calorimetry measures thermal transitions, whereas thermogravimetric analysis records changes in mass during heating or isothermal exposure. A decomposition temperature obtained from a rapid heating scan can substantially exceed the temperature compatible with months of stable operation. Likewise, an electrochemical stability window depends on electrode material, scan rate, impurity content, and the current threshold used to define decomposition. Reproducible characterization therefore reports procedures and sample history alongside numerical values.

Solvation, reactions, and separations

Ionic liquids provide multiple kinds of solute interaction within the same medium. A solute may experience electrostatic attraction, hydrogen bonding, coordination, dispersion forces, and exclusion from particular local domains. Consequently, describing an ionic liquid by a single “polarity” value is often insufficient. Different spectroscopic probes can report different aspects of its environment, and a polarity scale calibrated for ordinary molecular solvents may not predict all ionic-liquid behavior.

Anions frequently exert a strong influence on hydrogen-bond basicity and the dissolution of hydroxyl-rich substances. The dissolution of cellulose is a prominent example. Certain chloride- and acetate-containing ionic liquids disrupt the intermolecular and intramolecular interactions that stabilize cellulose fibers, allowing polymer chains to enter solution without necessarily undergoing covalent derivatization. In 2002, Richard Swatloski and colleagues reported cellulose dissolution in ionic liquids, helping establish a major area of biomass-processing research. Water or another antisolvent can subsequently precipitate regenerated cellulose, although recovery of the ionic liquid from that mixture can require substantial energy.

Reaction applications exploit both solvation and chemical participation. Ionic liquids can retain a dissolved catalyst while an organic product is removed as a separate phase, potentially simplifying catalyst reuse. They can also alter reaction rates and selectivity by stabilizing charged intermediates or changing reagent activities. Such effects belong to the specific reaction mechanism and cannot be generalized as an intrinsic catalytic benefit of the liquid state. An ion may itself coordinate a catalyst, react with a reagent, or become chemically transformed.

Liquid–liquid extraction uses differences in solute distribution between an ionic-liquid-rich phase and another phase. Applications studied include removal of aromatic compounds, sulfur-containing molecules, metal ions, and natural products. Functional groups can be attached to ions to strengthen binding of selected metals. Selectivity alone is not enough for a practical separation: the extractant must also provide adequate capacity, rapid mass transfer, manageable viscosity, and an effective method for releasing the captured substance and regenerating the liquid.

Gas absorption illustrates the difference between physical and reactive uptake. Carbon dioxide can dissolve physically in many ionic liquids, with uptake depending on pressure, temperature, and ion chemistry. Amine-functionalized or appropriately basic systems may bind it chemically, increasing low-pressure uptake but often changing viscosity and regeneration requirements. In all such applications, low solvent vapor pressure can reduce evaporative solvent loss, but it does not eliminate the cost of product recovery, water removal, or circulation through process equipment.

Electrochemical behavior and energy devices

An ionic liquid can serve as both solvent and electrolyte, eliminating the need to dissolve a supporting salt solely to provide conductivity. Many systems also lack the readily reducible or oxidizable molecular components present in conventional aqueous or organic electrolytes. This can permit operation over useful potential ranges. Nevertheless, every ionic liquid has finite electrochemical stability: cations, anions, impurities, and electrode surfaces all participate in determining the onset of reactions.

The electrochemical double layer at an ionic-liquid–electrode interface differs from the dilute-solution picture. The liquid already contains a high concentration of charges, and the ions occupy substantial volumes. Close to a charged electrode, alternating layers enriched in counterions and co-ions can develop. At some potentials, the first layers overcompensate the electrode charge, a phenomenon termed overscreening; at higher charge densities, crowding can become important. Specific adsorption and electrode crystallographic structure further influence the arrangement.

In rechargeable batteries, ionic liquids are investigated as components of electrolytes for lithium, sodium, and other charge carriers. Potential advantages include low volatility and reduced flammability for selected formulations. Important limitations include viscosity, inadequate conductivity at low temperature, interfacial decomposition, and the fact that the desired metal ion may carry only a small fraction of total current. Strong coordination between lithium ions and anions can influence both transport and electrode reactions. Adding an ionic liquid to a battery therefore changes an interacting electrolyte system rather than simply replacing a volatile solvent with an inert one.

In electric double-layer capacitors, a broader usable voltage can increase stored energy because the idealized relation is

E=12CV2,E=\frac{1}{2}CV^2,

where CC is capacitance and VV is voltage. Actual device performance also depends on pore accessibility, ion size, resistance, temperature, and long-term electrode stability. Ionic liquids can enter porous carbon structures differently from solvated ions in conventional electrolytes, making pore dimensions and surface chemistry central design variables.

Metal electrodeposition is another established area of study. Chloroaluminate ionic liquids enable aluminum deposition under conditions where competing reactions make ordinary aqueous deposition impractical. Other systems have been investigated for depositing metals, alloys, and semiconducting materials. Electrocatalytic reactions, including carbon dioxide reduction, also use ionic liquids or ionic-liquid-containing mixtures. Reported enhancements may arise from altered interfacial fields, local reactant concentrations, or stabilization of intermediates; assigning a mechanism requires separating these effects from changes in water content, conductivity, and electrode surface condition.

Industrial processes and functional materials

Industrial ionic-liquid applications are usually selected for a specific process advantage rather than for a general replacement of conventional solvents. The BASIL process is a useful example. During production of alkoxyphenylphosphines, 1-methylimidazole captures hydrogen chloride and forms a low-melting imidazolium chloride phase under process conditions. Separation of the liquid salt phase avoids some handling problems associated with a solid amine hydrochloride by-product. The relevant advantage is therefore phase behavior and process intensification, not simply a reduction in solvent vapor pressure.

Chloroaluminate ionic liquids have also been used in industrial hydrocarbon alkylation technology. Their acidity can support reactions traditionally carried out using strong mineral acids. Such systems require control of catalyst composition, contaminants, corrosion, and catalyst regeneration. Their industrial use demonstrates that moisture-sensitive ionic liquids can be practical in appropriately engineered closed processes, but it does not remove the hazards associated with acidic materials or reactive feedstocks.

Supported ionic-liquid systems reduce the quantity of liquid required. In a supported ionic-liquid phase catalyst, a thin ionic-liquid film is distributed over a porous solid, often containing a dissolved molecular catalyst. Gaseous reactants contact the film while the catalyst remains largely immobilized. This combines aspects of homogeneous catalyst chemistry with a solid-bed reactor configuration. Related supported liquid membranes use an ionic liquid held within pores to mediate selective transport. Film redistribution, leaching, support wetting, and long-term chemical stability determine whether laboratory performance persists during operation.

Ionic liquids also serve as functional components in lubricants, coatings, and polymer composites. Certain phosphonium and other formulations can reduce friction and wear, partly by forming protective interfacial films under load. Performance is sensitive to ion chemistry, metal surface, temperature, and water contamination; corrosive decomposition products can negate the benefit. In analytical chemistry, ionic-liquid-based stationary phases provide distinctive selectivity in chromatography, including gas chromatography, because their ionic and nonpolar regions interact differently with different analytes.

An ionogel immobilizes an ionic liquid within a solid network, such as a polymer or an inorganic gel. The resulting material can retain ionic conductivity while resisting macroscopic flow, making it useful for flexible electrochemical devices, actuators, and sensors. Ionic liquids can also act as processing media for nanomaterials or as templates influencing particle morphology. Across these applications, important engineering questions include mechanical compatibility, liquid migration, electrical resistance, material cost, and whether the ionic component can be recovered when the device reaches the end of its useful life.

Environmental behavior, safety, and assessment

The description of ionic liquids as intrinsically environmentally friendly is not justified. Low vapor pressure can reduce emissions of volatile solvent and lower inhalation exposure under some operating conditions. It says little by itself about aquatic toxicity, persistence, resource consumption, or hazards during synthesis and disposal. A material that does not readily evaporate may remain in a wastewater stream or accumulate in a solid waste fraction unless an effective recovery or treatment process is available.

Toxicity depends on molecular structure and exposure conditions. Some long-chain organic cations interact strongly with biological membranes, and increasing alkyl-chain length within a related series often increases toxicity, although solubility and other factors can modify the trend. Both cation and anion contribute to biological effects. Experimental studies with bacteria, algae, invertebrates, and cultured cells show substantial differences among formulations. Results for one ion pair cannot establish the safety of a different ionic liquid, nor do effects in an isolated test system directly determine human health outcomes.

Chemical instability creates additional hazards. Hexafluorophosphate- and tetrafluoroborate-containing liquids can undergo hydrolytic degradation under suitable conditions, potentially generating hazardous fluoride-containing products. Chloroaluminate liquids react with moisture and require corresponding containment. Some ionic liquids contain energetic ions or combustible organic components; others may decompose exothermically or release flammable gases when heated. Low volatility should therefore not be equated with nonflammability, absence of pressure hazards, or resistance to thermal runaway.

Environmental assessment must include production. Multistep synthesis may consume alkylating agents, fluorinated reagents, organic solvents, and substantial purification energy. Conversely, an ionic liquid that is costly to prepare may still offer a favorable process balance if it is used in small quantities, recovered efficiently, and enables a major reduction in energy or waste elsewhere. Life-cycle assessment compares these contributions across raw-material supply, manufacture, operation, and end-of-life treatment rather than isolating the solvent-use stage.

Recovery is often the decisive practical issue. Dissolved products, salts, water, and degradation compounds can accumulate through repeated cycles, changing performance even when most of the ionic liquid is retained. Membranes, adsorption, extraction, evaporation of volatile components, and chemical regeneration are possible treatment methods, but each adds equipment and material demands. Current research also investigates less persistent ion structures, improved biodegradability, and simpler synthesis routes. These properties require experimental validation for the complete formulation, including impurities and transformation products, rather than inference from labels such as “bio-based,” “choline-derived,” or “green.”