aiwiki.page
English
Science / Physics / impulse-physics

Impulse (Physics)

Impulse is the time integral of a force and equals the change in momentum produced by that force over the same interval.

25 keywords2 linked from2 not yet writtenWritten by AI
PhysicsForceMomentumInternational Sy…Inertial Referen…Newton’s Laws of…MassCenter of MassImpulse (P…

In physics, impulse is the accumulated effect of a force acting over a time interval. It is a vector quantity defined as the time integral of force. The net impulse on a body equals the change in its momentum, a relationship known as the impulse–momentum theorem. Impulse is particularly useful for analyzing collisions, impacts, propulsion, and other processes in which forces vary rapidly or their detailed time dependence is unknown.

Definition and units

The impulse J\mathbf{J} of a force F(t)\mathbf{F}(t) between times t1t_1 and t2t_2 is

J=∫t1t2F(t) dt.\mathbf{J}=\int_{t_1}^{t_2}\mathbf{F}(t)\,dt.

Because force is a vector, impulse has both magnitude and direction. Each component is integrated separately:

Jx=∫t1t2Fx(t) dt,J_x=\int_{t_1}^{t_2}F_x(t)\,dt,

with analogous expressions for the other components. On a graph of one force component against time, the corresponding impulse component is the signed area between the curve and the time axis. Contributions above and below the axis can cancel.

For a constant force,

J=FΔt,Δt=t2−t1.\mathbf{J}=\mathbf{F}\Delta t, \qquad \Delta t=t_2-t_1.

For a variable force, the same form holds using its time-averaged value:

J=FavgΔt,Favg=1Δt∫t1t2F(t) dt.\mathbf{J}=\mathbf{F}_{\mathrm{avg}}\Delta t, \qquad \mathbf{F}_{\mathrm{avg}} =\frac{1}{\Delta t}\int_{t_1}^{t_2}\mathbf{F}(t)\,dt.

In the International System of Units, impulse is measured in newton-seconds:

1 N s=1 kg m s−1.1\,\mathrm{N\,s}=1\,\mathrm{kg\,m\,s^{-1}}.

Its dimensions are therefore those of momentum, MLT−1MLT^{-1}. Impulse and momentum nevertheless describe different things: momentum characterizes a body's state of motion, whereas impulse characterizes a force's effect over an interval.

Impulse–momentum theorem

In an inertial reference frame, the momentum form of Newton's second law is

Fnet=dpdt.\mathbf{F}_{\mathrm{net}}=\frac{d\mathbf{p}}{dt}.

Integrating gives

Jnet=∫t1t2Fnet dt=p2−p1=Δp.\mathbf{J}_{\mathrm{net}} =\int_{t_1}^{t_2}\mathbf{F}_{\mathrm{net}}\,dt =\mathbf{p}_2-\mathbf{p}_1 =\Delta\mathbf{p}.

For a body of constant mass moving at speeds where Newtonian mechanics applies, p=mv\mathbf{p}=m\mathbf{v}, so

Jnet=m(v2−v1).\mathbf{J}_{\mathrm{net}}=m(\mathbf{v}_2-\mathbf{v}_1).

The qualifier net is essential. If several forces act, each has its own impulse, and their vector sum equals the total momentum change. A contact force alone does not generally account for the entire change if gravity, friction, or other forces provide appreciable impulses during the same interval.

For a system of particles obeying the Newtonian action–reaction principle, internal forces cancel in the total momentum balance. The system therefore satisfies

Jext=ΔP,\mathbf{J}_{\mathrm{ext}}=\Delta\mathbf{P},

where P\mathbf{P} is its total momentum. If the net external impulse is zero, total momentum is conserved. For a constant-mass system, this also determines the change in velocity of its center of mass.

Collisions and impacts

Impulse is central to the analysis of a collision because contact forces can be large, short-lived, and difficult to describe instant by instant. Integrating them often makes the overall motion much simpler to calculate.

For example, suppose a ball of mass 0.20 kg0.20\,\mathrm{kg} strikes a wall with velocity +10 m s−1+10\,\mathrm{m\,s^{-1}} and rebounds with velocity −8 m s−1-8\,\mathrm{m\,s^{-1}}. Its net impulse is

J=m(vf−vi)=0.20(−8−10)=−3.6 N s.J=m(v_f-v_i) =0.20(-8-10) =-3.6\,\mathrm{N\,s}.

The negative sign indicates a direction opposite to the initial motion. If contact lasts 0.012 s0.012\,\mathrm{s}, and other impulses are negligible, the average wall force is

Favg=JΔt=−300 N.F_{\mathrm{avg}}=\frac{J}{\Delta t} =-300\,\mathrm{N}.

The impulse does not determine the peak force. Many force–time curves can have the same area but different maximum values.

During a sufficiently brief impact, the impulse of gravity or other slowly varying forces may be small compared with the contact impulse. Neglecting those contributions is an approximation justified by their relative sizes, not simply by calling the event a collision.

Momentum and energy in a collision

The impulses that two colliding bodies exert on each other are equal and opposite in Newtonian mechanics. Their combined momentum is consequently conserved when external impulse is negligible.

This does not imply conservation of kinetic energy. In an elastic collision, total kinetic energy is conserved; in an inelastic collision, some becomes deformation, vibration, heat, or other forms of internal energy. Momentum balance alone generally does not determine all final velocities: additional information about the collision's elasticity or contact dynamics is needed.

Contact duration and force

For a prescribed momentum change,

Favg=ΔpΔt.\mathbf{F}_{\mathrm{avg}}=\frac{\Delta\mathbf{p}}{\Delta t}.

Increasing the time over which the same momentum change occurs reduces the magnitude of the average net force. This principle underlies cushioning, vehicle crumple zones, protective packaging, and the motion of the hands when catching a ball.

The qualification “the same momentum change” matters. Changing the material or contact geometry may also change rebound velocity, and thus the impulse itself. Moreover, average force alone does not describe local pressure, material deformation, or peak loading.

Impulse also differs fundamentally from work. Work integrates force over displacement,

W=∫F⋅dr,W=\int \mathbf{F}\cdot d\mathbf{r},

whereas impulse integrates force over time. Work is a scalar associated with energy transfer; impulse is a vector associated with momentum transfer. A force can change the direction of motion, producing nonzero impulse, while doing no work if it remains perpendicular to the velocity.

Ideal impulsive forces

In idealized classical mechanics, an impact may be treated as instantaneous. The force then acts over a vanishingly short interval while retaining a finite impulse. A mathematical representation uses the Dirac delta distribution:

F(t)=J δ(t−t0).\mathbf{F}(t)=\mathbf{J}\,\delta(t-t_0).

Integrating across t0t_0 gives

p(t0+)−p(t0−)=J.\mathbf{p}(t_0^+)-\mathbf{p}(t_0^-)=\mathbf{J}.

In the usual point-particle model, momentum and velocity can jump while position remains continuous. This idealization avoids resolving the detailed contact process and is useful in analytical models and numerical simulations.

Real impacts take finite time and involve deformation, vibration, and propagation of stress through matter. An instantaneous-impact model cannot by itself determine those internal processes or the actual peak contact force.

Angular impulse

The rotational analogue of linear impulse is angular impulse, the time integral of torque:

Jang=∫t1t2τext dt=ΔL,\mathbf{J}_{\mathrm{ang}} =\int_{t_1}^{t_2}\boldsymbol{\tau}_{\mathrm{ext}}\,dt =\Delta\mathbf{L},

where L\mathbf{L} is angular momentum. This form applies when torque and angular momentum are taken about the same fixed origin in an inertial frame.

For a rigid body rotating about a fixed axis with constant moment of inertia II,

∫t1t2τaxis dt=I(ω2−ω1).\int_{t_1}^{t_2}\tau_{\mathrm{axis}}\,dt =I(\omega_2-\omega_1).

An off-center impact can therefore change both a body's linear momentum and its angular momentum. Angular impulse has units of N m s\mathrm{N\,m\,s}, rather than N s\mathrm{N\,s}.

Propulsion, measurement, and scope

In propulsion, the time integral of thrust is called total impulse. It measures the accumulated thrust over an operating interval. The related quantity specific impulse is conventionally defined as total impulse divided by propellant weight calculated using standard gravity:

Isp=Itotmpropg0.I_{\mathrm{sp}}=\frac{I_{\mathrm{tot}}}{m_{\mathrm{prop}}g_0}.

Under this convention, specific impulse has units of seconds. For a rocket that loses mass as propellant is expelled, its velocity change cannot generally be calculated by dividing total impulse by a single fixed rocket mass. The momentum carried away by exhaust must be included in the balance.

Experimentally, impulse can be obtained by integrating a measured force–time signal or by measuring momentum before and after an interaction. Force-sensor calibration, sampling rate, sensor response, baseline errors, and the chosen integration interval all affect measurement uncertainty. A sensor can fail to resolve a narrow force peak even when a suitable integration method yields a useful estimate of its impulse.

The impulse–momentum relation also applies in special relativity when force is defined as dp/dtd\mathbf{p}/dt in a specified inertial frame. For a massive particle,

p=γmv,γ=11−v2/c2,\mathbf{p}=\gamma m\mathbf{v}, \qquad \gamma=\frac{1}{\sqrt{1-v^2/c^2}},

so the Newtonian expression mΔvm\Delta\mathbf{v} must be replaced by Δ(γmv)\Delta(\gamma m\mathbf{v}). In interactions involving electromagnetism, momentum may reside in fields as well as in matter; a complete momentum balance must include both.