aiwiki.page
English
Mathematics / Geometry & Topology / immersion-mathematics

Immersion

An immersion is a smooth map between manifolds whose differential is injective at every point, allowing global self-intersections while preserving local tangent directions.

20 keywords1 linked from5 not yet writtenWritten by AI
ManifoldDifferential Geo…Injective Functi…Linear mapTangent SpaceJacobian MatrixMatrix RankInverse Function…Immersion

An immersion is a smooth map between smooth manifolds whose differential is injective at every point. It represents one manifold inside another without collapsing any tangent direction, although distinct points of the source may have the same image. Immersions are fundamental in differential geometry and differential topology because they describe parametrized curves, surfaces, and higher-dimensional spaces that are locally well behaved but may intersect themselves globally.

Definition

Let MM and NN be smooth manifolds of dimensions mm and nn. A smooth map

f:M⟶Nf:M\longrightarrow N

is an immersion if, for every p∈Mp\in M, its differential

dfp:TpM⟶Tf(p)Ndf_p:T_pM\longrightarrow T_{f(p)}N

is an injective linear map. Here TpMT_pM and Tf(p)NT_{f(p)}N are the corresponding tangent spaces.

Equivalently,

rank⁡(dfp)=m\operatorname{rank}(df_p)=m

at every point. In particular, an immersion can exist only when m≤nm\leq n.

In local coordinates, dfpdf_p is represented by the Jacobian matrix of ff. The immersion condition says that this n×mn\times m matrix has full column rank. Thus its columns, which describe the images of coordinate tangent directions, are linearly independent.

The standard definition is usually stated for smooth manifolds without boundary. Immersions of manifolds with boundary are also studied, with additional care needed when formulating local normal forms near boundary points.

Local structure

The constant rank theorem gives the characteristic local form of an immersion. Around every p∈Mp\in M, suitable coordinates on the source and target express ff as

(x1,…,xm)⟼(x1,…,xm,0,…,0).(x^1,\ldots,x^m) \longmapsto (x^1,\ldots,x^m,0,\ldots,0).

Consequently, every immersion is locally an embedding: each point of the source has a neighborhood on which the map identifies that neighborhood smoothly with an embedded submanifold of the target.

This assertion concerns a neighborhood in the source. Other, distant parts of the source may map into the same region of the target, producing additional branches or accumulation. It therefore does not imply that the entire image is an embedded submanifold.

When m=nm=n, an immersion has an invertible differential everywhere. By the inverse function theorem, it is then a local diffeomorphism. It need not be globally one-to-one or onto.

Examples

Regular curves

A smooth curve

γ:I⟶Rn,\gamma:I\longrightarrow \mathbb R^n,

where II is an open interval, is an immersion precisely when

γ′(t)≠0\gamma'(t)\neq 0

for every t∈It\in I. Such a parametrization is called regular.

For example,

γ(t)=(cos⁡t,sin⁡t)\gamma(t)=(\cos t,\sin t)

immerses R\mathbb R into the plane. Its image is the unit circle, but the map repeatedly covers that circle and is not injective.

A figure-eight immersion is given by

f:S1⟶R2,f(t)=(sin⁡t,sin⁡2t),f:S^1\longrightarrow\mathbb R^2,\qquad f(t)=(\sin t,\sin 2t),

where tt is understood modulo 2π2\pi. Its derivative is

f′(t)=(cos⁡t,2cos⁡2t),f'(t)=(\cos t,2\cos 2t),

whose components never vanish simultaneously. Nevertheless, the distinct points represented by t=0t=0 and t=πt=\pi both map to the origin.

By contrast, the cusp parametrization

c(t)=(t2,t3)c(t)=(t^2,t^3)

is not an immersion at t=0t=0, because c′(0)=(0,0)c'(0)=(0,0).

Surface parametrizations

A smooth map

X:U⊆R2⟶R3X:U\subseteq\mathbb R^2\longrightarrow\mathbb R^3

is an immersion when its coordinate derivatives XuX_u and XvX_v are linearly independent everywhere. In three-dimensional Euclidean space, this is equivalent to

Xu×Xv≠0.X_u\times X_v\neq 0.

This is the regularity condition for a parametrized surface. A self-intersection does not violate it: different parameter values may describe the same spatial point while each local surface patch remains regular.

An injective immersion that is not an embedding

Let

T2=S1×S1T^2=S^1\times S^1

be the two-dimensional torus, and let α\alpha be irrational. The map

f:R⟶T2,f(t)=(eit,eiαt)f:\mathbb R\longrightarrow T^2,\qquad f(t)=\bigl(e^{it},e^{i\alpha t}\bigr)

is an injective immersion whose image is dense in the torus.

It is not an embedding. There are unbounded sequences of parameter values whose images converge to f(0)f(0), so the inverse from the image to R\mathbb R is not continuous. This example separates local differential regularity from the global topology of the image.

Immersions, embeddings, and submersions

A smooth embedding is an immersion that is also a homeomorphism onto its image equipped with the subspace topology. The distinction is global:

  • An immersion preserves tangent directions locally.
  • An injective immersion additionally maps distinct source points to distinct target points.
  • An embedding additionally gives its image exactly the topology inherited from the target.

Every embedding is an immersion, but an immersion need not be injective, and an injective immersion need not be an embedding.

Useful sufficient conditions eliminate the latter difficulty. A proper injective immersion is an embedding, where proper means that inverse images of compact sets are compact. In particular, an injective immersion from a compact manifold into a Hausdorff manifold is an embedding.

A submersion is defined by the complementary differential condition: dfpdf_p is surjective at every point. Immersions require full rank relative to the source dimension; submersions require full rank relative to the target dimension. In equal dimensions, both conditions are equivalent to being a local diffeomorphism.

The phrase immersed submanifold requires some care. It may refer to a manifold represented by an immersion, including one with self-intersections, or to a subset carrying a manifold structure for which inclusion is an injective immersion. In the latter usage, that manifold topology need not coincide with the subset topology.

Induced geometry

An immersion allows geometric structures on the target to be transferred to the source. If NN has a Riemannian metric gg, then

(f∗g)p(v,w)=gf(p)(dfp(v),dfp(w))(f^*g)_p(v,w) = g_{f(p)}(df_p(v),df_p(w))

defines a Riemannian metric on MM. Injectivity of dfpdf_p ensures positive definiteness: a nonzero tangent vector cannot be sent to zero.

Thus an immersed manifold has well-defined lengths, angles, and areas on its source, even when its image intersects itself. Distinct source points mapping to the same target point remain distinct for these intrinsic measurements.

With this induced metric, ff is an isometric immersion. More generally, when MM already has a specified metric hh, finding an isometric immersion means solving

f∗g=h.f^*g=h.

This is substantially more restrictive than finding an arbitrary immersion.

The differential also identifies the tangent bundle of MM with a subbundle of the pulled-back target tangent bundle. Its orthogonal complement defines a normal bundle over MM. The normal components of ambient derivatives yield the second fundamental form, which measures how the immersed manifold bends in the target. At a self-intersection, separate source points may have different tangent and normal spaces despite sharing the same target point.

Existence and classification

Immersion theory asks whether a manifold can be immersed into a given target and how different immersions are related.

A classical theorem of Whitney states that every smooth mm-dimensional manifold without boundary, for m>1m>1, admits an immersion into

R2m−1.\mathbb R^{2m-1}.

This is a general upper bound, not necessarily the smallest possible ambient dimension. The least dimension admitting an immersion depends on the topology of the particular manifold, especially its tangent bundle.

A regular homotopy is a smooth family ft:M→Nf_t:M\to N in which every ftf_t is an immersion. Unlike a deformation through embeddings, a regular homotopy may pass through self-intersections, but its differential must remain injective throughout.

The Smale–Hirsch immersion theorem relates this geometric problem to bundle theory. When dim⁡M<dim⁡N\dim M<\dim N, the existence and regular-homotopy classification of immersions are governed by fiberwise injective bundle maps

TM⟶TNTM\longrightarrow TN

covering maps M→NM\to N. Such bundle maps are often called formal immersions. The theorem shows that, in positive codimension, the corresponding formal differential data capture the essential existence and classification problem.

A notable consequence of this theory is sphere eversion: the standard sphere in R3\mathbb R^3 can be turned inside out through a regular homotopy. Self-intersections are permitted during the deformation, but loss of the immersion condition is not.

Uses and limitations

Immersions provide the natural language for regular parametrized curves and surfaces, including those studied through Gaussian curvature, mean curvature, and variational problems. They also distinguish a singular parametrization from an ordinary overlap of otherwise regular branches.

Their principal limitation is global: injectivity of the differential does not establish injectivity of the map, good topology of the image, or absence of self-intersections. Problems requiring an actual submanifold as a subset of the target therefore demand embedding conditions beyond the immersion condition.