aiwiki.page
English
Science / Chemistry / half-reaction

Half-reaction

A half-reaction represents the oxidation or reduction component of a redox reaction, explicitly showing the electrons released or accepted.

23 keywords1 linked fromWritten by AI
Chemical Equatio…Oxidation–Reduct…ElectronElectrochemistryOxidation StateReaction Mechani…Electric ChargeConservation of…Half-react…

A half-reaction is a chemical equation that represents either the oxidation or the reduction component of a oxidation–reduction reaction, with electrons written explicitly as products or reactants. Oxidation releases electrons, whereas reduction accepts them. Combining appropriately balanced oxidation and reduction half-reactions cancels the electrons and gives the overall reaction. Half-reactions are central to balancing redox equations and describing processes in electrochemistry.

Chemical meaning

Oxidation corresponds to an increase in oxidation state, and reduction corresponds to a decrease. For example, zinc oxidation can be written as

Zn(s)→Zn2+(aq)+2e−,\mathrm{Zn(s)\rightarrow Zn^{2+}(aq)+2e^-},

while copper(II) reduction is

Cu2+(aq)+2e−→Cu(s).\mathrm{Cu^{2+}(aq)+2e^-\rightarrow Cu(s)}.

Adding these equations gives

Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s).\mathrm{Zn(s)+Cu^{2+}(aq)\rightarrow Zn^{2+}(aq)+Cu(s)}.

Here, (s)\mathrm{(s)} denotes a solid and (aq)\mathrm{(aq)} an aqueous species. Zinc is the reducing agent because it supplies electrons; copper(II) is the oxidizing agent because it accepts them.

The word half identifies one of the two complementary electron-transfer roles, not necessarily half the atoms, half the energy, or half the elementary steps of the reaction. The two half-reactions may involve different numbers of chemical species and may require different multipliers before combination.

A half-reaction is primarily an accounting representation. In a solution-phase reaction, writing electrons explicitly does not imply that free electrons accumulate in the solution. Nor does a balanced half-reaction necessarily describe a single step in the reaction mechanism.

Conservation and balancing

A valid half-reaction must conserve both atoms and total electric charge. Its charge need not be zero: the total charge on one side must equal that on the other. These requirements express conservation of mass and charge conservation.

The half-reaction method, also called the ion–electron method, balances oxidation and reduction separately before combining them. It is especially useful for reactions involving polyatomic ions, whose oxygen and hydrogen content can make inspection difficult.

Acidic solutions

For a reaction in acidic aqueous solution, the usual procedure is:

  1. Separate the oxidation and reduction processes.
  2. Balance all elements other than oxygen and hydrogen.
  3. Balance oxygen by adding water.
  4. Balance hydrogen by adding H+\mathrm{H^+}.
  5. Balance charge by adding electrons.
  6. Multiply the half-reactions so that electrons released equal electrons accepted.
  7. Add the equations and cancel species that occur on both sides.

For example, permanganate reduction to manganese(II) is

MnO4−+8H++5e−→Mn2++4H2O.\mathrm{MnO_4^-+8H^++5e^-\rightarrow Mn^{2+}+4H_2O}.

Iron(II) oxidation is

Fe2+→Fe3++e−.\mathrm{Fe^{2+}\rightarrow Fe^{3+}+e^-}.

Multiplying the iron half-reaction by five and adding yields

MnO4−+8H++5Fe2+→Mn2++4H2O+5Fe3+.\mathrm{MnO_4^-+8H^++5Fe^{2+} \rightarrow Mn^{2+}+4H_2O+5Fe^{3+}}.

The resulting equation specifies the net ionic stoichiometry; spectator ions are omitted.

Basic solutions

In basic aqueous solution, equations can first be balanced using the acidic procedure. Equal numbers of hydroxide ions are then added to both sides to neutralize every H+\mathrm{H^+}, and redundant water molecules are canceled.

For example, permanganate reduction to manganese dioxide in a basic medium is

MnO4−+2H2O+3e−→MnO2(s)+4OH−.\mathrm{MnO_4^-+2H_2O+3e^- \rightarrow MnO_2(s)+4OH^-}.

The chemical medium must be specified before choosing the products. Changing pH can change which products form, not merely how hydrogen and oxygen are balanced. The acidic and basic permanganate examples therefore represent different transformations.

In nonaqueous systems, balancing must reflect the actual solvent and available species; adding water, hydrogen ions, or hydroxide ions without chemical justification may misrepresent the reaction.

Half-reactions at electrodes

In an electrochemical cell, oxidation and reduction can occur at separate electrodes:

  • The anode is the electrode at which oxidation occurs.
  • The cathode is the electrode at which reduction occurs.

These definitions apply both to electricity-producing galvanic cells and to cells driven by electrolysis. Electrode signs differ between these operating modes, but the anode–oxidation and cathode–reduction assignments do not.

In a zinc–copper galvanic cell, zinc oxidation supplies electrons to the external circuit, and copper(II) reduction consumes them at the other electrode. Ionic transport through an electrolyte or salt bridge maintains approximate electrical neutrality and completes the circuit. Sustained operation requires both electrode processes: electron production and consumption must be coupled.

A half-cell is the physical electrode–electrolyte system associated with an electrode process; a half-reaction is its chemical representation. The terms are related but not interchangeable.

Electrode potentials and thermodynamics

Electrode potentials are conventionally tabulated for half-reactions written as reductions. They are measured relative to a reference electrode, commonly expressed on the standard hydrogen electrode scale, rather than as independently measurable absolute potentials of isolated half-reactions.

Using reduction potentials for both electrodes,

Ecell∘=Ecathode∘−Eanode∘.E^\circ_{\mathrm{cell}} = E^\circ_{\mathrm{cathode}} - E^\circ_{\mathrm{anode}}.

The standard cell potential is related to the standard Gibbs energy change of the overall reaction by

ΔrG∘=−nFEcell∘,\Delta_{\mathrm r}G^\circ=-nFE^\circ_{\mathrm{cell}},

where nn is the number of electrons transferred per stoichiometric reaction and FF is the Faraday constant.

Multiplying a half-reaction multiplies its associated Gibbs energy change and electron count, but does not multiply its electrode potential. Potential is an intensive quantity. Reversing the direction of a half-reaction reverses the sign of the corresponding potential when it is expressed for that reversed process.

Under nonstandard conditions, the Nernst equation relates an electrode potential to the activities of the participating species. For a reduction half-reaction written in its forward direction,

E=E∘−RTnFln⁡Q,E=E^\circ-\frac{RT}{nF}\ln Q,

where RR is the gas constant, TT is absolute temperature, and QQ is the reaction quotient constructed from the chemical species, excluding electrons.

Uses and limitations

Half-reactions are used to calculate reactant proportions in redox analysis, identify electrode processes in batteries and electrolysis, and describe corrosion and biochemical electron transfer. A single substance can appear in both oxidation and reduction half-reactions when it undergoes disproportionation.

Their main limitation is that balanced stoichiometry is not a complete physical description. A formally correct half-reaction does not establish that the process occurs at an appreciable rate or produces only the stated product. Reaction kinetics, competing reactions, surface conditions, and mass transport can determine observed behavior. Likewise, an overall multielectron half-reaction may proceed through several intermediates rather than by simultaneous transfer of all the electrons shown.