A glacial trough is a valley shaped principally by the erosive action of a glacier, usually distinguished by steep sides and a broad, relatively flat or rounded floor. Its characteristic U-shaped cross-section contrasts with the narrower V-shaped profile commonly associated with river erosion in mountainous terrain. Glacial troughs may contain active glaciers, rivers, lakes, or sediment-filled valley floors; where the sea floods a glacially excavated valley, the resulting inlet is commonly a fjord.
Formation
Many glacial troughs develop from pre-existing river valleys. As ice accumulates in a mountain catchment, it flows downslope under its own weight, following and enlarging existing drainage routes. Unlike a river, whose erosive action is usually concentrated within a channel at the valley bottom, a thick glacier can erode both the valley floor and substantial portions of its sides.
Two major processes contribute to this erosion:
- Abrasion: Rock fragments carried at the glacier bed scrape and grind the underlying rock, producing polished surfaces, grooves, and fine sediment known as rock flour.
- Plucking, or quarrying: Ice removes blocks from fractured bedrock. Water entering cracks, pressure changes beneath the glacier, and the movement of ice around bedrock obstacles can help loosen and entrain these blocks.
These processes deepen and widen the valley, remove projecting spurs, and modify its longitudinal profile. Subglacial meltwater can also erode and transport material, although its contribution varies between settings.
Erosion is not determined by ice thickness alone. It also depends on sliding speed, the supply and distribution of debris, bedrock strength and fractures, and the conditions of water beneath the ice. A glacier frozen to its bed may cause relatively little erosion, whereas one sliding over a wet bed can be highly erosive. Thick sediment beneath a glacier may partly protect the bedrock rather than increase its erosion.
Large troughs commonly record several episodes of glaciation, especially during the Quaternary Period. Their present form may therefore reflect repeated enlargement rather than excavation during a single advance.
Characteristic landforms
Cross-sectional shape
The classic trough has a broad floor and steep walls, producing a U-shaped cross-section. Actual profiles are diverse: some are rounded or approximately parabolic, while others have narrow bottoms, asymmetric sides, or stepped walls. Bedrock structure, tributary junctions, and the inherited valley shape all influence the result.
A conspicuously flat modern valley floor may consist largely of sediment deposited after the glacier retreated. The buried bedrock profile can be substantially deeper and less regular than the visible surface.
Truncated spurs and valley shoulders
Before glaciation, a river valley may contain interlocking spurs—ridges projecting alternately from opposite sides. Glacial erosion can cut back their ends, producing truncated spurs with steep faces bordering a straighter valley.
Some troughs have a marked change in slope above the steep lower walls. Such valley shoulders may separate a strongly modified inner trough from less modified upper slopes. Their interpretation is not always straightforward, because changes in rock type or structure can produce similar breaks in slope.
Hanging valleys
A hanging valley joins a main trough at a level above its floor. This commonly occurs where a larger trunk glacier excavates its valley more deeply than a smaller tributary glacier excavates its own. After deglaciation, tributary streams may descend over the resulting step as waterfalls or cascades.
Rock basins and thresholds
Along its length, a trough may contain deep basins separated by bedrock steps or thresholds. Excavation below the downstream outlet level is called overdeepening. Such basins can hold lakes or become buried beneath sediment.
Overdeepening can develop because glacier motion and basal erosion do not follow the same constraints as an ordinary open river channel. Ice can move across local rises in the bed when driven by the overall gradient of its surface.
Related glacial landscapes
A glacial trough is distinct from a cirque, the bowl-shaped hollow commonly found near the head of a mountain glacier. Several cirques and tributary troughs may feed into a single main valley.
Troughs are also not restricted to isolated mountain glaciers. Outlet glaciers draining an ice sheet can excavate major valleys through coastal mountains. Glacially eroded troughs may continue offshore, including across a continental shelf, where their form records former routes of ice flow.
A fjord is a marine expression of a glacial trough, not a synonym for every glacial valley. Likewise, a moraine is an accumulation of glacier-transported sediment, whereas a trough is principally an erosional landform. Moraines may nevertheless occupy a trough or dam a lake within it.
Development after ice retreat
Once a glacier retreats, the exposed valley continues to change. Rivers rework glacial deposits and may build an extensive floodplain across the floor. Lakes collect sediment, while rockfalls, debris flows, and landslides modify the walls and contribute material to the valley bottom.
The removal of ice changes the stresses acting on steep valley sides. Existing fractures, groundwater conditions, and weathering can then contribute to slope instability. Consequently, the landscape visible today reflects both glacial excavation and subsequent river, lake, and slope processes.
Sediment filling can conceal a substantial part of the original trough. A shallow river flowing through a wide, flat valley may overlie a deep bedrock basin containing much older glacial and lake deposits.
Distribution and examples
Glacial troughs are widespread in formerly glaciated mountain regions, including the European Alps, Scandinavia, the Scottish Highlands, Alaska, western Canada, the Southern Alps of New Zealand, and Patagonia.
Yosemite Valley in California is a well-known example of a pre-existing river valley extensively modified by glaciers. Lauterbrunnen Valley in Switzerland illustrates steep trough walls and waterfalls descending from higher tributary valleys. Norway’s fjords show how marine flooding can occupy deeply excavated glacial valleys.
Identification and significance
A U-shaped profile alone is not sufficient evidence of glacial origin. Geologists assess the overall valley geometry together with features such as polished bedrock, glacial scratches, truncated spurs, hanging valleys, and associated deposits. Rock structure and later erosion must also be considered.
Troughs help reconstruct former ice-flow routes and the extent of glaciation. However, their size cannot be translated directly into a unique glacier thickness, erosion rate, or formation time: repeated advances, inherited relief, and variable rock resistance complicate those relationships.
Their buried basins and sediment fills are also important for understanding drainage, groundwater storage, lake histories, and the foundations of infrastructure built on formerly glaciated valley floors.