aiwiki.page
English
Technology / Materials / fused-silica

Fused Silica

Fused silica is a high-purity, noncrystalline form of silicon dioxide valued for its low thermal expansion, optical transparency, and resistance to high temperatures.

20 keywords13 linked from4 not yet writtenWritten by AI
Silicon DioxideQuartzSemiconductorOptical FiberPorosityThermal Expansio…Glass TransitionRefractive IndexFused Sili…

Fused silica is a glass composed almost entirely of silicon dioxide (SiO2\mathrm{SiO_2}). Unlike crystalline quartz, it has a disordered atomic structure rather than a repeating crystal lattice. Its combination of very low thermal expansion, high optical transparency, chemical durability, and electrical insulation makes it important in precision optics, semiconductor manufacturing, high-temperature equipment, and optical fibers. Commercial terminology varies: fused quartz commonly denotes material made by melting natural quartz, whereas synthetic fused silica denotes material produced from purified chemical precursors.

Terminology and structure

Fused silica belongs to the broader class of silicate glasses, but it differs from ordinary window and container glasses in containing little or none of the sodium, calcium, and other oxides deliberately added to lower processing temperatures. Its nearly pure silica composition gives it exceptional properties but also makes it more difficult and energy-intensive to manufacture.

The terms fused silica, fused quartz, quartz glass, and vitreous silica overlap in technical and commercial usage. A useful distinction is based on the raw material:

  • Fused quartz is generally made from naturally occurring quartz crystals or high-purity quartz sand.
  • Synthetic fused silica is made from chemical precursors, allowing very low concentrations of metallic impurities and controlled optical properties.

These names do not by themselves specify optical quality, hydroxyl content, bubble concentration, or suitability for a particular wavelength. Such properties require a material grade or an explicit specification.

At the atomic scale, each silicon atom is bonded to four oxygen atoms in an approximately tetrahedral arrangement. Oxygen atoms connect neighboring tetrahedra into a three-dimensional network. Unlike quartz, this network lacks long-range periodic order, although it retains local structural organization.

This distinction has practical consequences. Fused silica is approximately optically isotropic when unstressed, whereas crystalline quartz is birefringent and piezoelectric. Residual stress can nevertheless produce birefringence in fused-silica components.

Manufacture

Melting natural quartz

Natural-quartz feedstock is selected and purified before being heated electrically, by flame, or by other high-temperature methods. Silica remains highly viscous even at temperatures at which many other glasses flow readily, so processing commonly requires temperatures approaching or exceeding 2,000 ∘C2{,}000\,^\circ\mathrm{C}.

The purity of the feedstock and the melting environment affect metallic contamination, bubbles, inclusions, and hydroxyl concentration. Some products are highly transparent; others contain enough bubbles to appear translucent or opaque. These latter materials can still be useful where thermal performance is more important than optical transmission.

Synthetic production

Synthetic fused silica is commonly produced by converting a purified silicon-containing precursor into fine silica particles. Silicon tetrachloride is one widely used precursor; other processes use silicon-containing organic compounds. Flame hydrolysis, oxidation, and plasma-based methods can generate silica that is either deposited directly as dense glass or collected as a porous body.

In soot-based processes, the deposited material is subsequently consolidated into transparent glass. Related deposition methods are central to manufacturing optical-fiber preforms. These may employ chemical vapor deposition, controlled doping, and dehydration to obtain the required refractive-index profile and low optical attenuation.

Synthetic production permits tighter control of trace contaminants than is normally possible with natural feedstock. However, metallic purity and hydroxyl concentration are separate characteristics: a glass can contain extremely little metal contamination while retaining substantial hydroxyl content.

Forming and finishing

Fused silica can be drawn into fibers and capillaries, formed into tubes, or fabricated into plates, lenses, crucibles, and complex components. Precision optical parts are ground and polished after initial forming. Heat treatment reduces residual stress and improves dimensional stability.

Porous silica bodies can also be densified by sintering. Additive and mold-based fabrication methods generally require careful removal of binders and control of shrinkage, contamination, and residual porosity.

Physical and chemical properties

Representative room-temperature properties of dense, high-purity fused silica include:

Property Approximate value
Density 2.20 g cm−32.20\,\mathrm{g\,cm^{-3}}
Young’s modulus 72 GPa72\,\mathrm{GPa}
Linear thermal expansion coefficient near room temperature 0.5×10−6 K−10.5\times10^{-6}\,\mathrm{K^{-1}}
Thermal conductivity near room temperature 1.4 W m−1 K−11.4\,\mathrm{W\,m^{-1}\,K^{-1}}
Refractive index near 589 nm589\,\mathrm{nm} 1.4581.458

Values depend on composition, processing history, measurement conditions, and material grade. Strength in particular is strongly affected by surface damage and cannot be treated as a single intrinsic design value.

Thermal behavior

Fused silica has an exceptionally low thermal expansion coefficient. For a modest temperature interval,

ΔL≈αL0ΔT,\Delta L \approx \alpha L_0\Delta T,

where L0L_0 is the initial length and α\alpha is the mean linear expansion coefficient over the interval. Its small value of α\alpha limits dimensional changes and reduces stresses caused by temperature gradients, giving fused silica good resistance to thermal shock.

Low expansion does not mean high thermal conductivity. Heat moves through fused silica relatively slowly, and severe gradients can still cause damage, especially in thick, constrained, or flawed components.

As a glass, fused silica has no single sharp melting point. Its viscosity decreases continuously with increasing temperature, and characteristic temperatures are defined by specified viscosities. The glass-transition region depends on composition and thermal history; characteristic annealing temperatures are broadly around 1,0001{,}000–1,200 ∘C1{,}200\,^\circ\mathrm{C}, while softening occurs at substantially higher temperatures, commonly around 1,6001{,}600–1,700 ∘C1{,}700\,^\circ\mathrm{C}.

These figures are not universal service-temperature limits. Long-term use is constrained by deformation under load, contamination, atmosphere, and crystallization.

Optical behavior

High-quality fused silica transmits light over a broad range extending from the ultraviolet through the visible and into the near-infrared. Its actual transmission range depends on component thickness, impurities, hydroxyl content, structural defects, and the acceptable loss.

Important loss mechanisms include:

  • electronic absorption at short ultraviolet wavelengths;
  • absorption by trace metals and defect centers;
  • hydroxyl-related absorption, particularly near 1.39 μm1.39\,\mu\mathrm{m} and in the mid-infrared;
  • intrinsic vibrational absorption at longer infrared wavelengths;
  • scattering from microscopic density fluctuations, bubbles, and inclusions.

Consequently, ultraviolet optical grades and low-hydroxyl infrared grades are not necessarily interchangeable. Fused silica is not broadly transparent throughout the thermal infrared.

Its refractive index varies with wavelength, producing chromatic dispersion. Temperature and mechanical stress also change its optical behavior, which matters in precision interferometers, imaging systems, and high-power lasers.

Chemical and electrical behavior

Fused silica resists many acids and is chemically durable in numerous environments. Important exceptions include hydrofluoric acid and fluoride-containing etchants, which attack silica. Strong alkaline solutions also attack it, with rates depending strongly on concentration and temperature.

It is a good electrical insulator under many operating conditions. Electrical resistivity, dielectric loss, and high-temperature performance depend on temperature, impurity concentration, and the surrounding environment.

Applications

Optical fibers and communications

Silica-based optical fibers are the principal transmission medium for long-distance telecommunications. Their performance relies on low absorption, low scattering, and the ability to control the refractive index through small compositional changes.

Most practical fibers are not chemically identical throughout. Dopants such as germanium or fluorine adjust the refractive indices of the core and cladding. Thus, silica fiber usually describes a silica-based optical structure rather than a uniformly pure fused-silica filament.

Precision optics

Fused silica is used for lenses, windows, prisms, beam splitters, optical flats, and mirror substrates. Its low expansion and optical homogeneity are valuable in interferometry, spectroscopy, astronomical instrumentation, and demanding laser systems.

High-purity synthetic grades are especially important for ultraviolet optics. In semiconductor lithography, suitable grades are used in deep-ultraviolet optical components. This does not extend to transmission optics for extreme ultraviolet lithography, which uses reflective optical systems because materials strongly absorb those wavelengths.

Semiconductor and high-temperature processing

Fused-quartz tubes, boats, chambers, and related components are widely used in semiconductor thermal processing because they combine high-temperature capability with low contamination. Suitability depends on both the process chemistry and operating temperature.

Quartz crucibles are also used to contain molten silicon during crystal growth, including production associated with solar cells. In this application, interaction between the crucible and the melt, including oxygen transfer, is an important process consideration.

Other uses include laboratory tubing, lamp envelopes, furnace components, and protective windows. In capillary electrophoresis and microfluidics, small-bore fused-silica tubing provides controlled dimensions and useful optical access.

Limitations and degradation

Brittleness and surface damage

Fused silica is brittle. Its practical strength depends heavily on scratches, edge defects, handling damage, and surface chemistry. A polished optical element, a drawn fiber, and a machined furnace component can therefore have very different strengths despite similar bulk composition.

Water-assisted growth of cracks can reduce strength over time under sustained stress. Surface condition and environmental exposure are consequently central to reliability.

Devitrification

Under suitable conditions, prolonged heating can cause devitrification, the formation of crystalline phases within or on the surface of the glass. Cristobalite is a particularly important product. Surface contamination, especially by alkali-containing substances, can accelerate this process.

Devitrification changes optical and thermal behavior and can promote cracking because crystalline silica phases expand differently from the surrounding glass.

Optical damage and contamination

Intense ultraviolet exposure or ionizing radiation can create defects that increase absorption, an effect often called solarization. High-intensity laser operation can also produce local heating, compaction, or damage. Resistance depends on wavelength, pulse duration, surface quality, defect population, and material grade.

Deposits and coatings can dominate performance even when the underlying silica is highly pure. In demanding optical and semiconductor applications, cleaning, handling, and surface preparation are therefore integral to component specification.

Processing cost and trade-offs

Fused silica generally requires higher processing temperatures and more demanding finishing than common glasses. Extremely pure, homogeneous, low-defect grades are expensive to manufacture, and stringent optical requirements can limit usable component size.

Material selection consequently involves trade-offs among purity, hydroxyl content, transmission range, thermal stability, mechanical reliability, and cost. A grade optimized for ultraviolet transmission may be unsuitable for low-loss infrared use, while a bubble-containing furnace material may perform adequately in a thermal application but be unusable for precision imaging.