Electrostatic induction is the redistribution of electric charge within an object in response to an external electric field, without direct contact with the object producing that field. In an electrical conductor, mobile charges move until their field cancels the external field within the conducting material at electrostatic equilibrium. An initially neutral, isolated conductor remains neutral overall, but different parts of its surface acquire opposite charges. If the conductor is connected to another charge reservoir, such as Earth, induction can instead leave it with a net charge.
Physical mechanism
In metals, the mobile charges are electrons, while the positively charged atomic lattice remains approximately fixed. When a positively charged object approaches an isolated neutral metal body, electrons move toward the nearer surface. The farther surface is left with a deficit of electrons and therefore becomes positively charged. A negatively charged inducing object reverses this distribution.
The redistribution is driven by the total electric field: the field of the external source plus the field produced by the redistributed charges. At electrostatic equilibrium:
- The electric field inside the conducting material is zero.
- The conductor has the same electric potential throughout.
- Any excess charge resides on its surfaces.
- The electric field immediately outside a surface has no tangential component.
The surface charge is generally nonuniform. Its distribution depends on the conductor’s shape, the positions of nearby objects, and whether the conductor is isolated or held at a prescribed potential. Charges cannot usually be divided into two neatly separated patches of equal area.
Induction does not create charge. In an isolated, initially neutral conductor, the positive and negative induced charges sum to zero. Once the external source is removed, the charges redistribute again; an ideal neutral conductor returns to an uncharged state unless charge has been transferred to or from it.
Charging by induction
Charge redistribution and charging by induction are related but distinct. Redistribution alone need not change an object’s total charge. Charging by induction requires a route by which charge can enter or leave, followed by isolation of the object.
A standard demonstration uses a metal sphere on an insulating stand:
- A negatively charged rod is brought near the sphere without touching it. Electrons move away from the rod.
- The sphere is connected to ground, allowing electrons to flow from the sphere into Earth.
- The ground connection is removed while the rod remains nearby.
- The rod is withdrawn. The sphere retains a net positive charge, which redistributes over its surface.
For a positively charged rod, electrons enter the sphere from ground, leaving it negatively charged after the same sequence.
The order matters. If the inducing object is removed while the sphere remains grounded, charge can flow back and the sphere ordinarily returns to neutrality. The inducing rod need not lose charge, because it does not supply the charge transferred between the sphere and Earth.
Grounding is not essential. Two touching, initially neutral conductors can be polarized by a nearby charged object and then separated while that object remains in place. Once separated, they retain opposite net charges, while their combined charge remains zero.
Conductors and dielectrics
Induction in conductors involves charges moving over macroscopic distances. In a dielectric, charges are bound to atoms or molecules and cannot normally move freely through the material. An external field can instead slightly displace positive and negative bound charges or orient permanent molecular dipoles. This response is called electric polarization.
Both effects can make a neutral object respond to a charged object, but their microscopic mechanisms differ. In a conductor, mobile charges rearrange until the equilibrium field in the conducting material vanishes. In a dielectric, the field is generally reduced or otherwise modified, rather than completely canceled.
For a small, linearly polarizable object, the induced electric dipole moment can be written
where is the electric polarizability and is the applied field evaluated at the object, neglecting its own field. For an isotropic object with positive polarizability in a slowly varying electrostatic field, the approximate force is
Thus, a neutral polarizable object is generally drawn toward regions of stronger field. This explains why a charged rod can attract small neutral objects. A perfectly uniform field can polarize an object without producing this translational force.
Mathematical description
Electrostatic induction is a boundary-value problem: the external charges, conductor shapes, prescribed potentials, and total charges determine the resulting field and surface charge distribution.
In electrostatics,
where is electric potential. In a vacuum region containing no charge, the potential satisfies Laplace’s equation,
Every connected conductor is an equipotential surface. For an isolated conductor, its total charge is specified, while its potential is determined by the solution. For a grounded conductor, its potential is fixed conventionally at zero, while its net charge can change.
At a conductor–vacuum boundary, the normal field immediately outside the conductor obeys
where is the local surface charge density, is the vacuum permittivity, and the normal points outward from the conductor. This boundary condition follows from Maxwell’s equations together with the vanishing interior field.
A useful analytical technique is the method of images. For a point charge a distance above an infinite grounded conducting plane, the field above the plane is identical to that produced by and a fictitious charge placed the same distance below it. The image charge is a mathematical substitute for the induced surface charge, not a physical charge inside the conductor. In vacuum, the attractive force has magnitude
Demonstrations and applications
An electroscope demonstrates induction through the motion of conductive leaves. Bringing a charged object near its terminal redistributes charge through the instrument. The leaves can acquire charges of the same sign and repel even though the electroscope as a whole remains neutral. Grounding it during induction can leave a persistent net charge.
Induction also underlies the behavior of capacitors. Opposite charges on nearby conductors produce a potential difference; their geometry and surrounding dielectric determine the capacitance. In capacitive sensing, the approach of a conducting object changes the charge distribution and electrical coupling between electrodes.
Electrostatic shielding is another consequence. Charges rearrange on a closed conducting enclosure so that an external static field does not penetrate a cavity containing no charges. The enclosure need not be grounded to shield that cavity from external static fields. Grounding additionally fixes its potential and permits net charge exchange with Earth.
Electrostatic generators can use repeated induction and charge transfer to accumulate charge at high potential. Their operation does not provide free energy: mechanical work is required to move components against electrical forces.
Distinctions and limitations
Electrostatic induction differs from electromagnetic induction. The former concerns charge redistribution in response to an electric field; the latter concerns an induced electromotive force associated with changing magnetic flux. A changing magnetic field is not required for electrostatic induction.
It also differs from charging by direct contact and from charging associated with friction. Contact charging transfers charge between touching materials, whereas an inducing source can act without touching the object.
The ideal equilibrium description assumes sufficient time for mobile charges to redistribute. Real materials have finite electrical resistance, and insulating supports can leak charge, especially under humid conditions. Strong fields can cause ionization of surrounding gas or electrical breakdown, allowing charge to cross a gap. In those circumstances, changes in charge cannot be attributed to induction alone.
For rapidly varying fields, a purely electrostatic treatment may be inadequate: finite charge-relaxation times, magnetic effects, and electromagnetic propagation must also be considered.