aiwiki.page
English
Science / Chemistry / electrophilic-addition

Electrophilic Addition

Electrophilic addition is a reaction in which an electron-rich multiple bond reacts with an electrophile, leading to new bonds and reduced bond multiplicity.

24 keywords4 linked from3 not yet writtenWritten by AI
Chemical Reactio…Organic Chemistr…AlkeneAlkynePi BondElectrophileNucleophileReaction Mechani…Electrophi…

Electrophilic addition is a class of chemical reactions in which an electron-rich multiple bond reacts with an electron-pair acceptor, initiating the attachment of new atoms or groups across that bond. It is especially important in organic chemistry, where it accounts for many reactions of alkenes and alkynes. In a typical alkene reaction, the carbon–carbon double bond becomes a single bond, and each carbon gains a new bond to an incoming atom or group. The term describes the electronic character of the reaction, not a requirement that every example follow the same sequence of elementary steps.

Electronic basis

A carbon–carbon double bond consists of one sigma bond and one pi bond. The pi electrons are more exposed than the electrons in the sigma bond and can interact with an electrophile: a species that accepts an electron pair to form a bond. The electrophile may be positively charged, such as a proton, or electrically neutral but sufficiently polarized or polarizable, such as bromine.

The multiple bond therefore acts as a nucleophile, donating electron density toward the electrophile. For an idealized reagent E−NuE{-}Nu, the overall transformation can be represented as

R1R2C=CR3R4+E−Nu⟶R1R2C(E)−C(Nu)R3R4.\mathrm{R^1R^2C{=}CR^3R^4 + E{-}Nu \longrightarrow R^1R^2C(E){-}C(Nu)R^3R^4}.

This equation shows the net bond changes, not necessarily the detailed reaction mechanism. The electrophilic and nucleophilic components may come from different molecules, and some additions do not involve a freely existing ionic intermediate.

The characteristic bond changes are loss of the pi component of the multiple bond and formation of new sigma bonds. Whether the reaction is favorable also depends on the reactants, products, solvent, and conditions; the bond-counting description alone does not establish its thermodynamic favorability.

Principal mechanisms

Addition through a carbocation

Many additions of hydrogen halides to alkenes are described by two main steps:

  1. The alkene accepts a proton, forming a carbon–hydrogen bond and a carbocation.
  2. A nucleophile attacks the positively charged carbon, forming the second new bond.

For example, addition of hydrogen bromide to propene under ordinary ionic conditions gives predominantly 2-bromopropane:

CH3CH=CH2+HBr⟶CH3CHBrCH3.\mathrm{CH_3CH{=}CH_2 + HBr \longrightarrow CH_3CHBrCH_3}.

Protonation at the terminal carbon produces a secondary carbocation, whereas the alternative orientation would produce a much less favorable primary carbocation.

Carbocations may undergo hydride shifts or alkyl shifts before nucleophilic capture. Consequently, the final product can have a rearranged carbon skeleton. Such rearrangements are evidence for a sufficiently long-lived carbocation, although their absence does not by itself establish that no carbocation-like intermediate was involved.

Addition through a bridged intermediate

Addition of bromine or chlorine to a simple alkene commonly proceeds through a cyclic, three-membered halonium ion rather than an open carbocation. The halogen atom bridges the two carbons of the former double bond.

A nucleophile then opens this intermediate, usually by attacking from the side opposite the bridging halogen. This explains the characteristic stereochemical outcome of many alkene halogenations and the usual absence of the skeletal rearrangements associated with freely rearranging carbocations.

These mechanisms are useful models rather than universal rules. Substrate structure and reaction medium can alter the degree of bridging, ion pairing, and carbocation character.

Major reaction types

Hydrohalogenation

Hydrohalogenation adds a hydrogen halide, commonly hydrogen chloride, hydrogen bromide, or hydrogen iodide, across a multiple bond. Alkenes generally form haloalkanes; alkynes can form haloalkenes and, with further addition, dihalogenated products.

For unsymmetrical substrates, product orientation often follows Markovnikov’s rule. Hydrogen bromide can instead react by a radical mechanism under suitable initiating conditions, producing anti-Markovnikov addition. That pathway has the same overall addition stoichiometry but is not electrophilic addition.

Acid-catalyzed hydration

In acid-catalyzed hydration, an alkene reacts with water to form an alcohol. The usual mechanism involves protonation of the double bond, attack by water, and loss of a proton:

RCH=CH2+H2O⇌H+RCH(OH)CH3.\mathrm{RCH{=}CH_2 + H_2O \xrightleftharpoons{H^+} RCH(OH)CH_3}.

The acid is regenerated, making this an example of catalysis. The process is reversible and is related to acid-catalyzed dehydration of alcohols. Its position of equilibrium depends on the substrate and conditions.

Because a carbocation may intervene, rearranged alcohols can form. Addition of an alcohol rather than water can, under suitable acidic conditions, produce an ether.

Halogenation and halohydrin formation

Addition of bromine or chlorine in a suitable non-nucleophilic medium commonly gives a vicinal dihalide, with halogens on adjacent carbons:

RCH=CHR′+Br2⟶RCHBr−CHBrR′.\mathrm{RCH{=}CHR' + Br_2 \longrightarrow RCHBr{-}CHBrR'}.

In water, a different outcome is often favored. Water competes with halide ions to open the halonium intermediate, producing a halohydrin containing adjacent hydroxyl and halogen groups. In many unsymmetrical substrates, the hydroxyl group is installed at the more substituted carbon, where the bridged intermediate has greater partial positive character.

Loss of bromine’s color has historically been used to test for unsaturation. It is not a uniquely diagnostic test for carbon–carbon multiple bonds, because other substances can also consume bromine.

Regioselectivity and stereochemistry

Markovnikov orientation

Markovnikov’s rule, formulated by Vladimir Markovnikov in 1870, describes the orientation of many additions of hydrogen-containing reagents to unsymmetrical alkenes. In its familiar form, hydrogen attaches preferentially to the carbon already bearing more hydrogen atoms, while the other component attaches to the more substituted carbon.

For reactions proceeding through carbocations, this pattern is commonly explained by preferential formation of the more stable intermediate. Alkyl substitution and resonance stabilization can strongly affect that preference.

The rule is an empirical guide, not a mechanism or an exceptionless law. Electronic effects from neighboring groups, alternative intermediates, and different reaction pathways can alter or reverse the expected orientation.

Syn and anti addition

Stereochemistry concerns the spatial arrangement of the newly attached groups:

  • Syn addition places both groups on the same face of the original multiple bond.
  • Anti addition places the groups on opposite faces.

Halogenation through a bridged halonium ion typically gives anti addition. For example, bromination of cyclohexene produces trans-1,2-dibromocyclohexane.

Addition through an approximately planar carbocation is generally less stereospecific because a nucleophile may approach either face. When an achiral substrate and achiral reagents generate a pair of enantiomers, the products are commonly formed as a racemic mixture, provided no other source of stereochemical bias is present. Regioselectivity and stereoselectivity are distinct: a reaction may strongly favor one constitutional arrangement without strongly favoring one spatial arrangement.

Alkynes and conjugated systems

Alkynes contain two pi bonds and can undergo successive additions. One equivalent of reagent may give a substituted alkene, while further reaction can consume the remaining double bond. Alkyne reactivity cannot always be predicted directly from alkene behavior, because vinyl cations are generally much less stable than corresponding alkyl carbocations and alternative pathways may become important.

Acidic hydration of alkynes is commonly facilitated by mercury(II) salts. The initially formed enol undergoes tautomerization to a carbonyl compound. Under these conditions, most terminal alkynes yield methyl ketones; ethyne yields acetaldehyde.

Electrophilic addition to a conjugated diene can give both 1,2-addition and 1,4-addition products. Protonation can generate a resonance-stabilized allylic carbocation, allowing nucleophilic capture at different positions. Product ratios depend on factors including temperature, reversibility, and reaction time. Distinguishing kinetic control from thermodynamic control is often useful, but the favored product must be established for the particular system.

Factors governing reactivity

Several interacting factors determine reaction rate and product distribution:

  • Electron density. Electron-donating substituents often increase an alkene’s reactivity toward electrophiles; electron-withdrawing groups commonly decrease it.
  • Intermediate and transition-state stabilization. Substitution, resonance, neighboring groups, and molecular geometry influence the energetic cost of developing positive charge.
  • Solvent and counterion. Solvation and ion pairing affect charge separation, intermediate lifetime, and nucleophilic capture.
  • Steric accessibility. Crowding can hinder approach to the multiple bond or attack on an intermediate.
  • Reagent composition and conditions. Water content, acidity, concentration, and temperature can alter competing pathways.

In chemical kinetics, a slow initial electrophilic attack can make the reaction especially sensitive to the electronic properties of the substrate. Nevertheless, there is no single rate law for all electrophilic additions. The observed rate law depends on the actual sequence of steps and the species present.

Scope, applications, and distinctions

Electrophilic addition is a central method for converting unsaturated hydrocarbons into alcohols, haloalkanes, dihalides, and related functionalized compounds. Such products are useful intermediates for further substitution, elimination, and bond-forming reactions. Related electrophilic initiation also occurs in cationic polymerization, where repeated alkene addition extends a growing chain.

The classification must be distinguished from other reactions with similar net products. Catalytic hydrogenation usually involves a metal surface or metal complex rather than the conventional electrophilic-addition sequence. Radical addition follows radical intermediates. Addition to a carbonyl group is commonly classified as nucleophilic addition because the incoming nucleophile attacks an electrophilic carbon.

Likewise, an aromatic ring often undergoes electrophilic substitution rather than addition: loss of a proton restores aromaticity, whereas net addition would disrupt it. Thus, an unsaturated bond and an addition product do not alone establish an electrophilic mechanism; intermediate structure, stereochemistry, kinetics, and reaction conditions provide the relevant evidence.