Electron affinity is the energy released when an isolated, electrically neutral atom or molecule in the gas phase accepts an electron to form a negative ion. Under the convention in which released energy is positive, a positive electron affinity means that the negative ion lies below the neutral species plus a free electron in energy. Electron affinity helps explain the stability of negative ions, patterns in chemical reactivity, and electron transfer. A related but distinct definition is used for solid surfaces, particularly those of semiconductors.
Definition and sign conventions
For a neutral species , electron attachment is represented by
Taking the energy of a stationary free electron at infinite separation as zero, the electron affinity is
Here, the energies normally refer to the lowest-energy states of the isolated species. With this convention:
- Positive electron affinity: attachment releases energy, and the anion is energetically stable against spontaneous electron loss.
- Zero affinity: the anion is at the electron-detachment threshold.
- Negative electron affinity: attachment would require energy; no bound ground-state anion exists below the neutral-plus-electron threshold.
For species without a bound anion, an assigned negative affinity may describe a calculated or temporary electron-attached state rather than an ordinary stable-ion energy difference.
A second convention reports the energy change of attachment:
Thus, favorable attachment has a positive electron affinity under the energy-released convention but a negative attachment energy change. Tables must be checked for their sign convention.
The related electron-gain enthalpy, or electron-attachment enthalpy, is a thermodynamic reaction quantity defined at a stated temperature and under specified standard-state conventions. It is not automatically identical to a ground-state electron affinity: thermal and other thermodynamic corrections may be required.
Units
Electron affinities are commonly expressed in electronvolts per particle or kilojoules per mole. Approximately,
A value of , for example, corresponds to about released on attachment to one mole of isolated species.
Physical basis
Electron affinity reflects the balance between attraction of the added electron to the positively charged nucleus and repulsion involving the electrons already present. It cannot generally be predicted from nuclear charge alone.
Important influences include:
- Orbital occupancy. The added electron must enter an available quantum state consistent with the Pauli exclusion principle.
- Shielding and spatial extent. Existing electrons screen the nuclear charge, while the size of the accepting orbital affects both attraction and electron–electron repulsion.
- Relaxation. The other electrons redistribute after attachment.
- Electron correlation. Correlated electron motion can contribute substantially to the stability of weakly bound anions.
- Molecular structure. Attachment to a molecule can change bond lengths, bond angles, and electronic state.
These effects are described by quantum mechanics. Treating the incoming electron as simply occupying an unchanged empty orbital is often insufficient, especially when the resulting anion is weakly bound.
A positive electron affinity is an energetic statement, not a guarantee that a collision between an electron and an atom will produce a lasting anion. The attachment energy must be carried away, for example by emission of a photon or by interaction with another collision partner. Otherwise, electron detachment may occur.
Periodic trends in atoms
Electron affinities show recognizable patterns across the periodic table, but these patterns are less regular than those of ionization energy. Changes in electron configuration are especially important.
Across many periods, electron affinity tends to become more positive toward the halogens. A halogen atom gains an electron to complete its outer subshell, producing a strongly bound anion. Alkali metals also have positive affinities because attachment completes their outer subshell.
Several qualifications are important:
- Group 2 atoms generally have very small affinities or do not bind an additional electron in a stable ground-state anion. Their outer subshell is already filled.
- Group 15 atoms often have lower affinities than neighboring elements. Adding an electron to a half-filled subshell introduces electron pairing.
- Noble gases generally do not form stable ground-state atomic anions; the extra electron would occupy a higher shell.
- Down a group, increased size often weakens binding, but compact orbitals near the top of a group can create unusually strong electron–electron repulsion. Consequently, simple monotonic rules fail.
A prominent example is chlorine, whose electron affinity is greater than that of fluorine. Fluorine’s compact shell makes the additional electron experience stronger repulsion than it does in chlorine’s larger shell. Similarly, sulfur has a greater electron affinity than oxygen.
Representative approximate ground-state atomic values, using the positive-energy-released convention, are:
| Atom | Electron affinity, eV | Approximate equivalent, kJ mol |
|---|---|---|
| [[hydrogen | Hydrogen]] | 0.754 |
| [[carbon | Carbon]] | 1.262 |
| Oxygen | 1.461 | 141.0 |
| Fluorine | 3.401 | 328.2 |
| Sulfur | 2.077 | 200.4 |
| Chlorine | 3.613 | 348.6 |
These values concern isolated atoms, not the energetics of the corresponding elements in solids, liquids, or chemically bonded compounds.
Successive electron attachment
The first electron affinity concerns attachment to a neutral species. A second attachment process is
For small isolated atomic anions, adding another electron is strongly opposed by electrostatic repulsion and is generally energetically unfavorable. This does not prevent doubly charged anions from being stabilized in compounds. In a solid such as an oxide, interactions with surrounding positive ions can compensate for the unfavorable gas-phase attachment step.
Large molecules and clusters can sometimes support multiple excess electrons because charge can spread over a much larger structure.
Molecular electron affinities
For molecules, electron affinity depends on both electronic binding and changes in nuclear geometry. Two definitions must therefore be distinguished.
Adiabatic electron affinity
The adiabatic electron affinity compares the neutral molecule and its anion at their respective equilibrium geometries:
where and denote the equilibrium nuclear geometries. A comparison of the lowest vibrational levels also includes zero-point energy corrections.
This quantity describes the net energy released when the anion can relax to its equilibrium structure.
Vertical electron affinity
The vertical electron affinity describes attachment without allowing the nuclei to move from the neutral molecule’s geometry:
It is relevant to rapid electronic processes because electronic redistribution occurs much faster than substantial nuclear motion.
The vertical detachment energy is different: it measures electron removal while the nuclei remain at the anion’s geometry,
Vertical attachment and vertical detachment energies therefore need not coincide.
Types of molecular anions
In a valence-bound anion, the added electron occupies an orbital associated with the molecule’s chemical framework, as described by molecular orbital theory. Attachment may strengthen or weaken particular bonds.
A dipole-bound anion holds a very diffuse electron mainly through the long-range field of a sufficiently polar molecule. Its binding energy is usually small, and its geometry often resembles that of the neutral molecule.
Some electron-attached states are temporary resonances rather than bound anions. They may lose the electron or undergo dissociative electron attachment, in which molecular fragmentation leaves a negatively charged product. A molecule’s adiabatic electron affinity alone does not describe all these competing pathways.
Measurement and calculation
Photodetachment spectroscopy
A principal experimental method is photodetachment of a prepared negative ion:
For a transition between specified internal states, energy conservation gives
apart from recoil corrections, where is the Planck constant, is the photon frequency, and is the emitted electron’s kinetic energy.
Measuring the threshold photon energy or the photoelectron spectrum yields electron-binding energies. Excited electronic states and vibrational structure must be identified to distinguish the ground-state affinity from other transitions. Molecular spectra can also reveal structural changes accompanying attachment.
Mass spectrometry can select the anion under study, while spectroscopic measurements determine its detachment energies.
Thermochemical determination
Electron affinities can also be inferred through thermochemical cycles combining reaction energies, ionization energies, and other measured quantities. Born–Haber cycles connect gas-phase electron attachment with the formation of ionic solids. The uncertainty of an inferred affinity depends on all the contributing measurements and assumptions.
Quantum-chemical calculation
Calculations commonly determine electron affinity from a difference between neutral and anion total energies. Accurate results require adequate treatment of electron correlation and sufficiently diffuse mathematical functions to describe the added electron.
Weakly bound anions are especially demanding. An inadequate calculation may falsely predict binding or fail to find a real bound state. The negative of an unoccupied orbital energy is not, in general, a reliable replacement for the full attachment energy.
Relation to other chemical quantities
Ionization energy
Ionization energy measures the energy needed to remove an electron from a neutral species:
Electron affinity instead concerns attachment to that neutral species. For a bound anion, the neutral species’ electron affinity equals the energy required to detach an electron from the anion into the corresponding neutral state.
Electronegativity
Electronegativity describes the tendency of an atom in a chemical environment to attract electron density. Electron affinity is a specific energy difference for isolated species; electronegativity is a broader, scale-dependent bonding concept.
Mulliken electronegativity relates them through
where and are ionization energy and electron affinity in consistent units. A high electronegativity therefore does not necessarily imply the highest electron affinity.
Reduction potential
Electron affinity contributes to the energetics of reduction, but a solution reduction potential is not simply a gas-phase electron affinity expressed in volts. Solvent interactions, structural changes, entropy, and reference-electrode conventions also matter. Electrochemical equilibria are governed by the relevant Gibbs free-energy changes of the complete process.
Electron affinity in solids
In semiconductor physics, electron affinity usually denotes the energy separation between the vacuum level immediately outside a surface and the conduction-band minimum:
This is a surface-related quantity associated with electronic band structure, not the isolated-atom definition.
It differs from the work function,
which is referenced to the Fermi level. Surface termination, adsorbed species, surface dipoles, and band bending can influence these energy relationships.
A surface has negative electron affinity when its conduction-band minimum lies above the external vacuum level. Electrons near that minimum can then escape without an additional energy barrier associated with the vacuum-level offset, although scattering and transport still affect emission. This meaning of negative electron affinity must not be confused with unfavorable electron attachment to an isolated atom.