Electrical resistivity is a material property that relates the electric field within a substance to the resulting density of electric current. Conventionally represented by the Greek letter , it measures how strongly a material opposes current flow under specified conditions. Its SI unit is the ohm metre, . A low resistivity characterizes materials such as copper and silver, whereas a high resistivity characterizes materials such as dry glass and many polymers. Resistivity is distinct from electrical resistance: resistance describes a particular object or conducting path, while resistivity separates the material response from the object's dimensions.
Resistivity connects practical electrical engineering with the microscopic physics of matter. It reflects the concentration and mobility of charge carriers, their interactions with vibrations and defects, and the organization of atoms and electronic states. Measurements of resistivity are used to select conductors, characterize semiconductors, investigate superconductivity, and infer subsurface geological structure. Its meaning must nevertheless be specified carefully: resistivity can depend on temperature, direction, magnetic field, frequency, and sample size, and some materials cannot be described adequately by a single constant.
Definition, units, and relation to resistance
For a homogeneous, isotropic material in the linear-response regime, the local constitutive relation is
where is the electric field in volts per metre and is the current density in amperes per square metre. The reciprocal quantity is electrical conductivity, :
Conductivity is measured in siemens per metre. These relations describe steady conduction when the material's response is approximately proportional to the applied field. They do not imply that every material has a field-independent resistivity under every condition.
For a straight, uniform specimen of length and cross-sectional area , with current distributed uniformly across its section,
This familiar form of Ohm's law explains why a longer wire has greater resistance and a thicker wire has less resistance, even when both are made of the same material. A copper wire with , length , and area has a resistance of approximately . Doubling its length doubles its resistance; doubling its area halves it. These geometric changes do not, by themselves, alter bulk resistivity.
In the International System of Units, the ohm metre follows directly from . Semiconductor work also commonly uses , with
Metallurgical data sometimes use microohm centimetres, for which . Confusion between these units can produce errors of factors of 100 or more. Temperature, composition, and measurement direction should accompany a quoted value whenever they materially affect its interpretation.
For nonuniform specimens, the simple length-to-area formula may fail because the current density varies throughout the sample. The potential distribution must then be determined from charge conservation and the local transport relation. In steady conduction without internal current sources,
where is electric potential. Contacts, constrictions, layered structures, and spatially varying conductivity all influence the measured resistance. Resistivity remains a local material property only to the extent that a continuum description is valid.
Microscopic origins and the development of transport theory
In metals, electrical conduction is primarily carried by mobile electrons. An applied field changes their distribution of motion, producing a small average drift superimposed on much faster microscopic motion. Finite resistivity arises because processes within the material relax the current-carrying distribution. These include scattering by lattice vibrations, impurities, defects, and, under suitable circumstances, other electrons. Resistivity is therefore not simply a measure of how many electrons a material contains; it also reflects how effectively their directed motion persists.
Paul Drude's electron theory of metals, introduced in 1900, provided an influential microscopic model. In the Drude model, carriers of number density , charge magnitude , mass , and mean relaxation time give
The model treats carriers much like classical particles undergoing collisions. It captures several useful relationships, including the increase of conductivity with carrier density and relaxation time. However, it does not correctly describe the statistical distribution or many thermal and magnetic properties of electrons in metals.
Arnold Sommerfeld's quantum treatment in the late 1920s incorporated Fermi–Dirac statistics. In a metal, the exclusion principle fills electronic states up to the vicinity of the Fermi energy, and only a restricted range of states responds strongly to weak electrical and thermal perturbations. Modern transport theory also uses electronic band structure, which determines carrier velocities, available states, and effective masses. In simple cases, the Drude expression survives with an effective mass , but a single mass and relaxation time are inadequate for many real materials.
A perfectly periodic crystal lattice does not act as a sequence of classical obstacles that inevitably dissipates current. Electronic states extend through the periodic structure. Resistance arises from processes that disturb or relax the current-carrying state, with phonons—quantized lattice vibrations—providing a major mechanism in ordinary metals at room temperature. Electron–electron collisions require particular care: in a translationally invariant system, collisions that conserve total momentum do not necessarily produce a finite direct-current resistivity. Momentum transfer to the lattice, disorder, or other channels can make them resistive.
Electrical transport is closely related to thermal conductivity. In many metals, the same electrons carry both charge and heat. The Wiedemann–Franz law relates the electronic thermal conductivity to conductivity through , where in the ideal degenerate-electron limit. Deviations reveal differences between the processes relaxing electrical current and heat flow.
Conductors, semiconductors, and insulating materials
The enormous range of resistivities found in matter results from differences in carrier concentration, carrier mobility, and electronic structure. In an electrical conductor, mobile carriers are readily available. In a semiconductor, their concentration can vary greatly with temperature, impurities, and illumination. In an insulator, ordinary operating conditions provide relatively few mobile carriers, or the carriers are strongly localized. These categories are useful but do not define universal numerical boundaries: materials can cross between regimes as physical conditions change.
Representative room-temperature values illustrate the scale of variation:
| Material | Approximate resistivity, | Important qualification |
|---|---|---|
| Silver | High-purity bulk material | |
| Copper | Depends on purity and processing | |
| Aluminium | High-purity bulk material | |
| Tungsten | Much higher at lamp-filament temperatures | |
| Nichrome | Varies with alloy composition | |
| Intrinsic silicon | Order of | Strongly temperature- and purity-dependent |
| Ultrapure water at | Requires stringent control of contamination | |
| Dry glass and many polymers | Commonly or higher | Strong dependence on composition and moisture |
These are illustrative values rather than exact constants. In particular, semiconductor and insulating-material resistivities can span many orders of magnitude within one named material class.
For a semiconductor containing mobile electrons and holes, a common low-field expression is
where and are carrier concentrations and and are mobilities. Doping silicon with donor or acceptor impurities can change its resistivity dramatically by altering the carrier population. At sufficiently high doping, impurity scattering reduces mobility, so conductivity does not increase in direct proportion to dopant concentration. The band gap influences how readily thermal energy generates electron–hole pairs.
In electrolytes, current is carried by moving positive and negative ions, rather than predominantly by electrons. Conductivity depends on ion concentration, charge, mobility, and interactions with the surrounding liquid. Pure water conducts weakly because of its small equilibrium population of hydrogen and hydroxide ions. Its widely used limiting resistivity at , approximately , is equivalent to . Dissolved salts or absorbed carbon dioxide lower this value.
Insulators are not necessarily perfect barriers to current. Thermal activation, defects, ion migration, moisture, and field-assisted processes can produce measurable conduction. A dielectric may therefore have both a polarization response and a finite leakage conductivity. At sufficiently high electric fields, breakdown creates a much more conductive path, but this behavior is not adequately described by the material's low-field resistivity.
Temperature, impurities, and structural disorder
Temperature often changes resistivity more strongly than any other readily controlled variable. For many metals near room temperature, a limited temperature interval can be described by
where is the temperature coefficient evaluated near the reference temperature . For annealed copper near , is approximately . The relationship is an approximation, not a universal law; extrapolating it to very low temperatures or temperatures near melting is generally inappropriate.
The positive temperature coefficient of ordinary metals largely reflects increasing scattering by thermally excited lattice vibrations. At sufficiently high temperatures relative to characteristic phonon energies, the phonon contribution is often approximately proportional to temperature. At low temperatures, the available vibration modes and their effectiveness in relaxing electron momentum change. For simple metals under suitable conditions, the Bloch–Grüneisen description predicts an electron–phonon contribution proportional to in its low-temperature limit. Other terms, including electron–electron contributions, may become important.
Impurities and structural defects produce a contribution that often persists as temperature approaches zero, provided the material remains in its normal conducting state. This residual resistivity is sensitive to dissolved foreign atoms, vacancies, dislocations, and grain boundaries. Matthiessen's rule approximates the total as
with additional terms where necessary. It assumes that different scattering contributions can be combined approximately independently. Real materials can violate this assumption because scattering processes interact or affect different parts of the electronic structure unequally.
The residual-resistivity ratio, commonly written
is widely used to characterize high-purity metals. The low-temperature reference must be specified; approximately is common when a meaningful normal-state measurement is possible. A large ratio generally indicates relatively weak residual scattering, but it is not an absolute chemical-purity scale. Deformation, crystal structure, magnetic impurities, and measurement conditions also matter.
Semiconductors frequently show the opposite overall temperature trend because heating generates additional carriers. In an intrinsic semiconductor, carrier concentration contains an exponential factor approximately proportional to , where is the band gap and the Boltzmann constant. Mobility usually also changes with temperature, so resistivity does not follow the carrier-generation factor alone. Doped semiconductors can pass through carrier freeze-out, an extrinsic regime, and an intrinsic regime. Structural phase transitions, magnetic ordering, and strong disorder can introduce abrupt changes or nonmonotonic behavior.
Directional response, magnetic fields, and superconductivity
A single scalar resistivity suffices only when the material's response is isotropic and the relevant current and electric field are parallel. In an anisotropic material, the general linear relation is
where are components of the resistivity tensor. The conductivity tensor is its matrix inverse:
Individual tensor components are therefore not generally related by simple reciprocals. Crystal symmetry constrains the allowed components. In a suitable set of principal axes and without transverse effects, three principal resistivities may describe the response.
Layered materials provide conspicuous examples. In graphite, current flows much more readily along the carbon sheets than perpendicular to them. The difference reflects the electronic structure and the much weaker coupling between layers. Other layered conductors and semiconductor structures also exhibit strong directional transport. In a polycrystalline specimen, grain orientations, grain-boundary resistance, and processing-induced texture determine how these microscopic anisotropies combine into a macroscopic measurement.
An applied magnetic field can change both the magnitude and direction of the electrical response. The Lorentz force deflects moving charge carriers, producing a transverse voltage known as the Hall effect. In a simple one-carrier model, its sign and magnitude help identify carrier type and estimate concentration. In multiband materials, interpreting Hall measurements requires accounting for the concentrations and mobilities of multiple carrier populations. A Hall field is perpendicular to current and does not itself represent ordinary longitudinal dissipation.
Magnetoresistance is the change in longitudinal resistance or resistivity caused by a magnetic field. Its magnitude and sign depend on electronic structure, scattering, and magnetic order. Orbital motion can increase resistivity, whereas suppression of certain spin-dependent scattering processes can decrease it. In magnetic multilayers, the relative orientations of magnetization in different layers alter electron transmission and scattering. Such effects underpin important magnetic-field sensors and data-storage readout technologies.
Superconductivity represents a qualitatively different transport state. Below appropriate critical temperature, magnetic-field, and current limits, a superconductor supports direct current without measurable bulk electrical resistance. In conventional superconductors, Cooper pairs and a coherent collective state provide the microscopic basis. Superconductivity is not established by a small resistance alone: magnetic behavior, particularly flux exclusion under suitable conditions, is also fundamental. Moreover, practical superconductors can exhibit dissipation when magnetic vortices move or when operating limits are exceeded. Zero direct-current resistivity does not imply the absence of all alternating-current losses.
Measurement methods and uncertainty
Resistivity measurement combines an electrical determination with a geometric model. For a uniform bar or wire, measured resistance is multiplied by . Accurate dimensions are essential: an error in diameter has approximately twice its relative effect on the calculated cross-sectional area of a circular wire. Temperature control is equally important for metals with substantial temperature coefficients. Reporting a resistivity without specifying temperature can conceal differences larger than the instrumental uncertainty.
A two-terminal resistance measurement includes the specimen, leads, and contact resistances. This is often unacceptable for low-resistance samples. A four-terminal measurement uses one pair of contacts to supply current and a separate pair to sense voltage. Because the voltage-measuring instrument draws very little current, voltage drops in the sensing leads and their contacts are greatly reduced. For a uniform specimen, the voltage-contact spacing defines the effective measurement length. Current spreading near the injection contacts must still be considered.
For thin films, sheet resistance is particularly useful. A homogeneous film of thickness has
It is conventionally expressed in ohms per square. A rectangular strip with length and width has when current flow is uniform and contact effects are negligible. In the ideal limit of an effectively infinite thin sheet, four equally spaced collinear point probes give
Finite thickness, nearby edges, unequal spacing, and finite contact size require correction factors.
The van der Pauw method, introduced by Leo van der Pauw in 1958, determines sheet resistance from measurements using four small boundary contacts. For a homogeneous, isotropic, simply connected sheet of uniform thickness, two characteristic measured resistances satisfy
The method accommodates many sample shapes, but holes, anisotropy, nonuniform thickness, and large contacts can invalidate its simplest formulation.
Very high resistivities pose different challenges. Leakage through supports, humidity-dependent surface conduction, dielectric charging, and instrument input currents can obscure the bulk response. Guard electrodes help separate volume conduction from surface leakage. In liquid electrolytes, the cell geometry is represented by a calibrated cell constant, and alternating-current methods often reduce electrode-polarization effects. A complete measurement uncertainty assessment also considers calibration, thermal voltages, self-heating, and sample inhomogeneity. Reversing the applied current can help distinguish the resistive voltage, which reverses sign, from approximately steady thermal offsets.
Frequency dependence and limits of bulk resistivity
Resistivity is most straightforward for steady or slowly varying fields in a specimen large enough to behave as a continuum. Under alternating current, current and field can have different phases. Their relationship may be described by a complex, frequency-dependent conductivity,
with complex resistivity defined as its reciprocal in an isotropic local medium. The measured electrical impedance of a device additionally includes geometric inductance, capacitance, contacts, and interfaces. A frequency-dependent impedance cannot automatically be converted into an intrinsic bulk resistivity using the direct-current formula.
In the Drude model, using fields proportional to ,
When , the response approaches the direct-current conductivity . At higher frequencies, carrier inertia produces a substantial phase shift. Real materials can also exhibit interband absorption, hopping conduction, relaxation of dipoles, and ionic diffusion. The division between conduction current and polarization current must therefore be defined consistently, especially when both conductivity and permittivity are used to describe the same measurement.
In a good conductor, high-frequency current tends to concentrate near the surface through the skin effect. In its simple classical regime, the penetration depth is
where is magnetic permeability. For copper near room temperature and relative permeability close to one, the skin depth is approximately at and at . The reduced effective conducting area raises the alternating-current resistance. This geometric redistribution can occur even when the local resistivity remains approximately equal to its low-frequency value.
At small dimensions, surfaces and interfaces alter electron scattering. A metallic film or wire whose thickness or width approaches the electron mean free path can have greater resistivity than a macroscopic sample of the same composition. Grain boundaries become especially important in fine-grained interconnects. When transport becomes ballistic, electrons can traverse the conducting region without ordinary internal momentum-relaxing collisions, and contact transmission becomes central to the measured resistance.
In coherent nanoscale structures, conductance is often more naturally described through quantum transmission channels than through a bulk resistivity. Strong disorder introduces another limit: Anderson localization can suppress diffusion by quantum interference. In such regimes, a measured resistance may depend on sample size and configuration in ways that make a size-independent, local resistivity an incomplete description.
Electrical engineering and materials design
Resistivity directly influences conductor dimensions, power losses, and thermal management. For a uniform conductor carrying current , the rate of electrical energy conversion into heat is
Locally, the rate per unit volume is
for an isotropic ohmic material. This is Joule heating. Low resistivity reduces unwanted losses in power cables, transformer windings, motor windings, and electronic interconnections. Increasing cross-sectional area can reduce resistance, but adds material, mass, and cost.
Copper and aluminium dominate many large-scale applications because resistivity is only one selection criterion. Aluminium has higher resistivity than copper but much lower mass density. At equal length and resistance, an aluminium conductor requires roughly 1.6 times the cross-sectional area of copper, using representative room-temperature bulk values, yet has only about half the mass. Mechanical strength, connection reliability, corrosion behavior, and operating temperature influence the final choice. Silver conducts slightly better than copper but is generally reserved for applications where its other properties or specialized performance justify its cost.
Heating elements require a different balance. Nickel–chromium alloys combine relatively high resistivity with useful high-temperature oxidation resistance, allowing practical lengths of wire to produce substantial heat. Precision resistors often use alloys such as manganin or constantan because a small temperature coefficient and long-term stability are more important than minimum resistivity. Resistance thermometers deliberately exploit predictable temperature dependence; platinum is widely used because its resistance–temperature behavior is reproducible over useful ranges.
In semiconductor manufacturing, wafer resistivity is an important indicator of doping and electrical uniformity. It influences substrate losses, depletion-region dimensions, leakage behavior, and the interaction between devices fabricated on the same wafer. However, resistivity alone does not uniquely determine dopant concentration unless carrier mobility, compensation, and temperature are adequately characterized. Thin-film resistors additionally depend on thickness uniformity and processing history, while metallic interconnects can depart substantially from bulk tabulated values as their dimensions shrink.
Electrical insulation requires high volume resistivity, but design also depends on surface leakage, dielectric strength, moisture absorption, and aging. A material with high bulk resistivity may still fail because of contaminated surfaces or localized breakdown. Temperature-dependent conduction can also produce thermal runaway: under fixed applied voltage, a specimen whose resistance falls as it warms dissipates increasing power, potentially reinforcing the temperature rise. Evaluating such behavior requires the electrical circuit and heat-removal conditions as well as the resistivity curve.
Geological interpretation and subsurface imaging
Electrical resistivity is a major observable in near-surface geology, groundwater exploration, mineral exploration, and environmental investigation. Most common rock-forming minerals are relatively resistive, so bulk rock conductivity often depends strongly on connected pore fluids. Salinity, water saturation, pore connectivity, clay content, and temperature can matter more than the name of the rock. Metallic minerals and graphite provide important exceptions because they can create electronically conducting pathways.
For clean, clay-poor porous rocks, Archie's empirical relationships provide a useful starting point. A common expression is
where is bulk-rock resistivity, is pore-water resistivity, is porosity, is water saturation, and , , and are empirical parameters. Introduced through G. E. Archie's work published in 1942, these relationships became important in petroleum well logging. They are not universal: clay-related surface conduction, complex pore geometry, fractures, and conductive minerals can invalidate the simplest assumptions.
In direct-current surface surveys, electrodes inject current into the ground and other electrodes measure voltage differences. The observed ratio is multiplied by an array-dependent geometric factor to obtain apparent resistivity:
For an ideal Wenner array with four equally spaced electrodes on a flat, homogeneous half-space, , where is adjacent-electrode spacing. Apparent resistivity equals the true resistivity for the ideal homogeneous model; over a heterogeneous subsurface it represents a weighted response to a volume of ground, not the resistivity at one point.
Electrical resistivity tomography combines many electrode configurations with numerical inversion to estimate two- or three-dimensional resistivity distributions. It is used to investigate groundwater, saline intrusion, contaminated sites, engineered embankments, and frozen ground. Because freezing substantially changes the amount and connectivity of liquid water, resistivity measurements are also useful in permafrost studies. Electrode spacing, array design, topography, and data quality determine the achievable investigation depth and resolution.
Interpretation is intrinsically nonunique. A low-resistivity region may indicate saline water, clay-rich sediment, increased saturation, or conductive mineralization; a high-resistivity region may reflect dry rock, fresh-water-bearing clean material, ice, or an air-filled cavity. Reliable interpretation therefore combines electrical models with boreholes, laboratory measurements, geological mapping, or other geophysical observations. Time-lapse surveys can reveal changing moisture or fluid movement, but temperature changes and electrode-contact variations must be separated from the subsurface process of interest.