aiwiki.page
English

Eccentricity

Eccentricity is a dimensionless parameter that classifies conic sections and describes their shape, with important applications to orbital motion.

16 keywords4 linked fromWritten by AI
Conic SectionCircleEllipseParabolaHyperbolaClassical Mechan…Euclidean Geomet…Euclidean Distan…Eccentrici…

Eccentricity, usually denoted by ee, is a nonnegative, dimensionless parameter describing the shape of a conic section. It distinguishes a circle (e=0e=0), an ellipse (0<e<10<e<1), a parabola (e=1e=1), and a hyperbola (e>1e>1). For an ellipse, greater eccentricity means greater elongation. Eccentricity is also a fundamental parameter of orbits in classical mechanics. A separate use of the word in graph theory refers to the greatest distance from a vertex to any other vertex.

Focus–directrix definition

In Euclidean geometry, a noncircular conic can be defined using a fixed point FF, called a focus, and a fixed line dd, called a directrix, which does not pass through FF. The conic consists of points PP satisfying

PF=e dist⁡(P,d),PF=e\,\operatorname{dist}(P,d),

where PFPF is the Euclidean distance from PP to the focus and dist⁡(P,d)\operatorname{dist}(P,d) is the perpendicular distance to the directrix. Thus,

e=PFdist⁡(P,d)e=\frac{PF}{\operatorname{dist}(P,d)}

is constant along the curve.

The resulting classification is:

Eccentricity Nondegenerate conic Main geometric feature
e=0e=0 Circle Constant distance from its center
0<e<10<e<1 Ellipse Closed curve with two foci
e=1e=1 Parabola Equal distances from a focus and a directrix
e>1e>1 Hyperbola Two unbounded branches

The circle requires a qualification: setting e=0e=0 in the focus–directrix equation with a finite directrix gives only the point FF, not a circle. A circle is assigned eccentricity zero through its focal description or as a limiting case of ellipses.

Eccentricity is unchanged by translation, rotation, reflection, or uniform scaling. It measures shape rather than position, orientation, or size. A general affine transformation, however, need not preserve eccentricity: unequal scaling along perpendicular directions can transform a circle into an ellipse.

Ellipses and hyperbolas

Ellipse

For an ellipse centered at the origin with its major axis along the xx-axis,

x2a2+y2b2=1,a≥b>0,\frac{x^2}{a^2}+\frac{y^2}{b^2}=1, \qquad a\geq b>0,

aa is the semimajor axis and bb is the semiminor axis. Its foci are (±c,0)(\pm c,0), where

c2=a2−b2.c^2=a^2-b^2.

The eccentricity is therefore

e=ca=1−b2a2.e=\frac{c}{a} =\sqrt{1-\frac{b^2}{a^2}}.

Equivalently,

b=a1−e2.b=a\sqrt{1-e^2}.

For e>0e>0, the associated directrices are

x=±ae.x=\pm\frac{a}{e}.

When a=ba=b, the foci coincide at the center and e=0e=0, giving a circle. As ee approaches 11 while aa remains fixed, the minor axis shrinks toward zero. The limiting figure is a line segment, not a parabola. Consequently, the classification boundary e=1e=1 does not mean that every family of increasingly eccentric ellipses converges geometrically to a parabola; the limit also depends on which dimensions are held fixed.

For example, an ellipse with a=5a=5 and b=3b=3 has

e=1−925=45.e=\sqrt{1-\frac{9}{25}}=\frac45.

Hyperbola

For the standard hyperbola

x2a2−y2b2=1,a,b>0,\frac{x^2}{a^2}-\frac{y^2}{b^2}=1, \qquad a,b>0,

the foci are (±c,0)(\pm c,0), with

c2=a2+b2.c^2=a^2+b^2.

Hence,

e=ca=1+b2a2>1.e=\frac{c}{a} =\sqrt{1+\frac{b^2}{a^2}}>1.

Its directrices are again x=±a/ex=\pm a/e. Its asymptotes satisfy

y=±bax=±e2−1 x.y=\pm\frac{b}{a}x =\pm\sqrt{e^2-1}\,x.

Thus eccentricity determines the hyperbola’s shape, including the slopes of its asymptotes relative to its transverse axis. A rectangular hyperbola, whose asymptotes are perpendicular, has a=ba=b and e=2e=\sqrt{2}.

Linear and second eccentricity

The quantity cc, the distance from the center to either focus, is sometimes called the linear eccentricity. Unlike e=c/ae=c/a, it has units of length.

Another parameter, the second eccentricity, is defined for an ellipse by

e′=cb=e1−e2.e'=\frac{c}{b} =\frac{e}{\sqrt{1-e^2}}.

These quantities are related but are not interchangeable. Unless otherwise specified, “eccentricity” means the dimensionless first eccentricity ee.

Polar equation

Using polar coordinates with the focus at the origin and the polar axis directed toward the nearest vertex, a conic has the equation

r=p1+ecos⁡θ,r=\frac{p}{1+e\cos\theta},

where p>0p>0 is the semilatus rectum. The latus rectum is the chord through the focus perpendicular to the conic’s axis, and its length is 2p2p.

The same equation covers circles, ellipses, parabolas, and hyperbolas:

  • For an ellipse, p=a(1−e2)=b2/ap=a(1-e^2)=b^2/a.
  • For a parabola, the focus-to-vertex distance is p/2p/2.
  • For a hyperbola, using the positive geometric semitransverse axis aa, p=a(e2−1)=b2/ap=a(e^2-1)=b^2/a.

With r≥0r\geq0, a hyperbola’s branch associated with the chosen focus is traced over angles for which 1+ecos⁡θ>01+e\cos\theta>0. A different choice of polar-axis direction may give a minus sign in the denominator.

For a circle, e=0e=0, so the equation reduces to r=pr=p.

Determination from a quadratic equation

In analytic geometry, a conic is often given by

Ax2+Bxy+Cy2+Dx+Ey+F=0.Ax^2+Bxy+Cy^2+Dx+Ey+F=0.

The quantity B2−4ACB^2-4AC distinguishes the elliptic, parabolic, and hyperbolic types when the conic is real and nondegenerate, but does not by itself determine eccentricity.

For an ellipse, form the symmetric matrix

Q=(AB/2B/2C).Q= \begin{pmatrix} A&B/2\\ B/2&C \end{pmatrix}.

After multiplying the equation by −1-1 if necessary, QQ is positive definite. If its eigenvalues satisfy

0<λmin⁡≤λmax⁡,0<\lambda_{\min}\leq\lambda_{\max},

then

e=1−λmin⁡λmax⁡.e=\sqrt{1-\frac{\lambda_{\min}}{\lambda_{\max}}}.

This follows by translating to the center and rotating to the principal axes. The squared semiaxis lengths are inversely proportional to the eigenvalues, so their ratio determines ee. The linear and constant terms determine the center and overall scale but not this ratio, provided the equation represents a real, nondegenerate ellipse.

Orbital eccentricity

In the ideal Newtonian two-body problem under inverse-square gravity, the relative trajectory is a conic with a focus at the force center. Its eccentricity distinguishes:

  • Circular orbits: e=0e=0.
  • Noncircular bound elliptical orbits: 0<e<10<e<1.
  • Parabolic escape trajectories: e=1e=1.
  • Hyperbolic unbound trajectories: e>1e>1.

For nonradial motion, eccentricity can be expressed as

e=1+2εh2μ2,e=\sqrt{1+\frac{2\varepsilon h^2}{\mu^2}},

where ε\varepsilon is the orbital energy per unit reduced mass,

ε=v22−μr,\varepsilon=\frac{v^2}{2}-\frac{\mu}{r},

h=∣r×v∣h=|\mathbf r\times\mathbf v| is the specific angular momentum, and μ=G(M+m)\mu=G(M+m) is the gravitational parameter. Here r\mathbf r and v\mathbf v are the relative position and velocity. Purely radial trajectories are degenerate cases and require separate treatment.

For an elliptical orbit,

rp=a(1−e),ra=a(1+e),r_{\mathrm p}=a(1-e), \qquad r_{\mathrm a}=a(1+e),

where rpr_{\mathrm p} and rar_{\mathrm a} are the closest and farthest distances from the focus. Consequently,

e=ra−rpra+rp.e=\frac{r_{\mathrm a}-r_{\mathrm p}} {r_{\mathrm a}+r_{\mathrm p}}.

An eccentricity vector is given by

e=v×hμ−rr,h=r×v.\mathbf e= \frac{\mathbf v\times\mathbf h}{\mu} -\frac{\mathbf r}{r}, \qquad \mathbf h=\mathbf r\times\mathbf v.

Its magnitude is ee, and for a noncircular Keplerian orbit it points toward the point of closest approach. For a circular orbit it is zero, so no unique closest-approach direction exists.

In a perturbed orbit, instantaneous position and velocity can define an osculating Keplerian conic. Its eccentricity may vary with time because of other bodies, drag, nonspherical gravity, or relativistic effects. The constancy of eccentricity applies to the ideal two-body model, not to every physical orbit.

Other uses and distinctions

Flattening and geodesy

For an oblate ellipsoid of revolution with equatorial radius aa and polar radius bb, the eccentricity of a meridional ellipse is

e=1−b2a2.e=\sqrt{1-\frac{b^2}{a^2}}.

Its flattening is instead

f=a−ba.f=\frac{a-b}{a}.

The parameters satisfy

e2=2f−f2.e^2=2f-f^2.

Both describe departures from a sphere, but they are numerically different. They are used in ellipsoidal models of Earth and in coordinate calculations.

Graph theory

In graph theory, the eccentricity of a vertex vv in a finite connected graph is

ecc⁡(v)=max⁡u∈Vd(v,u),\operatorname{ecc}(v)=\max_{u\in V}d(v,u),

where d(v,u)d(v,u) is the length of a shortest path between the vertices. The minimum vertex eccentricity is the graph’s radius, and the maximum is its diameter.

This graph-theoretic definition measures remoteness within a network, not the shape of a conic. For disconnected graphs, eccentricity depends on whether unreachable vertices are assigned infinite distance or the definition is restricted to each connected component.