E/Z nomenclature is a system in stereochemistry for specifying the configuration of certain double bonds, especially carbon–carbon double bonds in alkenes. The two substituents at each end of the double bond are ranked independently using the Cahn–Ingold–Prelog (CIP) priority rules. If the higher-priority substituents are on the same side of the double bond, the configuration is designated Z; if they are on opposite sides, it is designated E. The letters derive from the German words zusammen (“together”) and entgegen (“opposite”).
Structural basis and applicability
A carbon–carbon double bond consists of a sigma bond and a pi bond. Rotation about the double bond disrupts the orbital overlap responsible for the pi bond and therefore requires substantially more energy than ordinary rotation about a carbon–carbon single bond. Consequently, different arrangements of substituents can exist as distinct configurations rather than merely as rapidly interconverting conformations.
For an ordinary alkene represented as
E/Z nomenclature is applicable when the two substituents on each individual double-bond carbon are distinguishable under the CIP rules. The four substituents do not all need to be different: but-2-ene, for example, has a hydrogen and a methyl group on each double-bond carbon and therefore has both E and Z forms.
By contrast, propene, , has two identical hydrogen substituents on one double-bond carbon, so its double bond receives no E/Z descriptor. Substituents that differ only in isotopic composition can nevertheless be distinguished by the CIP rules.
For a simple alkene with no other stereogenic features, the E and Z forms are diastereomers: stereoisomers that are not mirror images of one another. This is one form of isomerism arising from spatial arrangement rather than different atomic connectivity.
Assigning E and Z
Assignment involves three steps:
- Identify the two substituents attached to each end of the double bond.
- Rank the two substituents at each end independently.
- Compare the positions of the two higher-priority substituents: same side gives Z, and opposite sides gives E.
The comparison is made across the double bond, not between all four substituents collectively. The highest-priority group at one end need not be chemically identical to the highest-priority group at the other end.
Schematically, if H denotes the higher-priority substituent and L the lower-priority substituent at each end:
H H H L
\ / \ /
C = C C = C
/ \ / \
L L L H
Z E
Here H and L are priority labels, not chemical symbols. Rotating the entire drawing in the plane does not change the assignment.
CIP priority rules
Directly attached atoms
Priority is first determined by the atomic number of the atom directly attached to the double-bond atom. A higher atomic number gives higher priority. Thus:
Priority is not determined by the overall size of a substituent, its electronegativity, or its total molecular mass.
For isotopes of the same element, the isotope with the higher mass number has higher priority. For example:
Resolving ties
If the directly attached atoms are identical, the comparison proceeds outward through the substituents. The atoms attached to each tied atom are listed in decreasing priority and compared at the first point of difference.
For example, ethyl has higher priority than methyl. Both attach through carbon, but the next comparison is:
The first difference is carbon versus hydrogen, so ethyl ranks higher. A hydroxymethyl group, , outranks ethyl because its corresponding list begins with oxygen rather than carbon.
Multiple bonds and rings
Multiple bonds are treated using formal duplicate-atom representations. For priority comparison, a carbonyl carbon is treated as connected to duplicate representations of oxygen. A formyl group, , therefore gives the comparison list , whereas hydroxymethyl gives ; formyl has higher priority.
These duplicate atoms are bookkeeping devices, not additional physical atoms. Ring structures likewise require systematic treatment of paths and duplicated nodes. More complicated cases, particularly substituents containing other stereogenic units, require the fuller CIP sequence rules rather than only the introductory atomic-number rules.
Relationship to cis/trans nomenclature
Cis/trans nomenclature describes the relative positions of specified groups. For a simple disubstituted alkene with one hydrogen on each double-bond carbon, the relationship is straightforward:
| Compound | Relative position of the non-hydrogen groups | E/Z designation |
|---|---|---|
| cis-but-2-ene | Same side | (Z)-but-2-ene |
| trans-but-2-ene | Opposite sides | (E)-but-2-ene |
However, cis does not universally mean Z, and trans does not universally mean E. Cis/trans refers to a chosen pair of groups, whereas E/Z always uses independently assigned CIP priorities.
For example, in 1-bromo-1,2-dichloroethene, one double-bond carbon bears bromine and chlorine, while the other bears chlorine and hydrogen. Bromine outranks chlorine at the first carbon; chlorine outranks hydrogen at the second. If the two chlorine atoms lie on the same side, the higher-priority bromine and chlorine lie on opposite sides, giving an E configuration.
E/Z notation is therefore especially useful for trisubstituted and tetrasubstituted alkenes, where a cis/trans description may be ambiguous or inapplicable. Conversely, cis/trans descriptions of substituents on saturated rings do not become E/Z descriptions, because they describe a different structural relationship.
Use in chemical names
The descriptor is written in parentheses before the compound name, normally in italic type:
- (E)-but-2-ene
- (Z)-but-2-ene
- (2E,4Z)-hexa-2,4-diene
When several double bonds require specification, locants identify the bonds to which the descriptors apply. The locant corresponds to the lower-numbered atom of the relevant double bond.
Each double bond is assessed separately. A molecule with several double bonds may contain both E and Z configurations. Although independent double bonds can formally give up to combinations, symmetry and structural constraints may reduce the number of distinct realizable stereoisomers.
Omission of an E/Z descriptor does not by itself establish that a sample contains an equal mixture. Depending on context, it can indicate unspecified configuration, a mixture, or a double bond for which E/Z assignment is inapplicable.
Scope beyond ordinary alkenes
E/Z descriptors can also describe suitable double bonds involving atoms other than carbon, including certain imines and oximes. Such assignments require the applicable conventions for heteroatoms and lone pairs; the elementary picture of four ordinary carbon-bound substituents is not sufficient in every case.
E/Z notation is not a universal description of stereochemistry. Tetrahedral stereogenic centers normally use R/S descriptors. Some cumulenes exhibit axial chirality and require a different stereochemical treatment rather than assignment as an ordinary isolated alkene.
Experimental assignment and interpretation
E/Z configuration is a structural designation, not an experimental measurement method. Establishing it requires evidence about molecular geometry.
Nuclear magnetic resonance can provide such evidence through coupling constants and spatial interactions. For many simple alkenes bearing a hydrogen on each double-bond carbon, trans hydrogen–hydrogen coupling is larger than cis coupling, although interpretation depends on the structure. X-ray crystallography can establish the arrangement in a crystalline sample. Spectroscopic evidence must first be interpreted structurally; CIP priorities are then used to assign the descriptor.
The letters do not specify relative stability or reaction rate. Many simple acyclic E alkenes are more stable than their Z counterparts because bulky groups are farther apart, but steric effects, electronic effects, intramolecular interactions, and ring constraints can alter this relationship.
Nor does the descriptor itself identify a reaction mechanism. A change from E to Z may reflect actual geometric isomerization, but a chemical transformation can also change substituent priorities without reversing their spatial arrangement. Comparisons between reactant and product descriptors must therefore distinguish a change in geometry from a change in CIP ranking.
Historical context
The system belongs to the broader development of systematic stereochemical nomenclature associated with Robert Sidney Cahn, Christopher Kelk Ingold, and Vladimir Prelog. Their sequence-rule framework was formulated in influential publications in 1956 and expanded in 1966, with later refinements addressing more complex structures. Its use for double-bond configuration supplied a general alternative to relying solely on cis/trans descriptions.