Cumene is an aromatic hydrocarbon with the molecular formula and the condensed structural formula . It consists of a benzene ring bearing an isopropyl group. A colorless, flammable liquid at room temperature, cumene occurs in petroleum-derived mixtures but is manufactured primarily as an intermediate for producing phenol and acetone. This conversion, known as the cumene process, accounts for its principal industrial importance.
Structure and physical properties
Cumene belongs to the alkylbenzenes, compounds in which an alkyl group is attached to a benzene ring. Its isopropyl substituent is bonded to the ring through the central carbon atom of a three-carbon chain. It is therefore a structural isomer of propylbenzene, whose three-carbon side chain is unbranched.
The side-chain carbon directly attached to the ring bears one hydrogen atom and two methyl groups. This benzylic hydrogen is particularly important to cumene’s oxidation chemistry: its removal produces a radical stabilized by interaction with the aromatic ring.
Representative physical properties are:
| Property | Approximate value |
|---|---|
| [[molar-mass | Molar mass]] |
| Normal boiling point | |
| Melting point | |
| Liquid [[density | density]] near room temperature |
| Flash point, closed cup | About |
Cumene has low solubility in water and mixes readily with many organic liquids. Its low polarity makes it useful as a solvent for some nonpolar substances, although this application is much smaller than its use as a chemical feedstock. Its vapor is heavier than air.
Industrial manufacture
Cumene is manufactured by reacting benzene with propene, also called propylene:
This reaction is an example of alkylation. Acid catalysis promotes formation of the carbon–carbon bond between the aromatic ring and the three-carbon substituent. The reaction preferentially gives the branched isopropyl group rather than a straight-chain propyl group.
Earlier industrial processes used catalysts such as solid phosphoric acid or aluminum chloride systems. Modern plants commonly employ zeolite catalysts, whose porous structures and acid sites help control activity and product selectivity. Catalyst choice affects feed-purity requirements, operating conditions, corrosion, waste generation, and the distribution of by-products.
A principal competing reaction is further alkylation of cumene, producing diisopropylbenzenes and more highly substituted compounds. Industrial processes commonly use excess benzene to limit this reaction. Diisopropylbenzenes can also be reacted with benzene in a transalkylation stage to generate additional cumene. Unreacted benzene is recovered and recycled, while distillation separates cumene from lighter and heavier components.
Conversion to phenol and acetone
The cumene process consists of two principal chemical stages: oxidation to cumene hydroperoxide and acid-catalyzed cleavage of that intermediate.
Oxidation
Cumene reacts with oxygen, usually supplied as air, to form cumene hydroperoxide:
The reaction proceeds through a radical chain mechanism. Removal of the benzylic hydrogen produces a cumyl radical, which reacts with oxygen to form a peroxyl radical. Hydrogen abstraction from another cumene molecule then forms the hydroperoxide while continuing the chain.
Operating conditions and conversion are controlled to limit unwanted oxidation products and decomposition of the hydroperoxide. Unreacted cumene can be recovered for reuse.
Acid-catalyzed cleavage
Cumene hydroperoxide undergoes an acid-catalyzed rearrangement and cleavage, commonly called the Hock rearrangement:
The products are phenol and acetone. In the reaction mechanism, acid activation of the peroxide group facilitates migration of the phenyl group to oxygen; subsequent transformations produce the two final compounds.
The overall reaction is:
Thus, the ideal stoichiometry produces one mole of acetone for every mole of phenol. This corresponds to approximately tonnes of acetone per tonne of phenol, before process losses and side reactions.
Industrial significance and limitations
The cumene process became commercially important during the mid-twentieth century and developed into the dominant industrial route to phenol. Phenol is a starting material for phenolic resins, bisphenol A, and intermediates used in nylon manufacture. Acetone is both a widely used solvent and a feedstock for other chemicals.
A central economic limitation is the compulsory co-production of phenol and acetone. Their markets do not necessarily grow at the same rate, so the value and demand for acetone influence the economics of phenol manufacture.
The process also requires control of oxidation selectivity and peroxide-containing streams. By-products can include acetophenone, cumyl alcohol, and alpha-methylstyrene. Some alpha-methylstyrene can be hydrogenated back to cumene and recycled, depending on plant design.
Safety and environmental behavior
Cumene is flammable, and its vapor can form ignitable mixtures with air. Inhalation at sufficiently high concentrations can cause irritation and central nervous system effects. Liquid entering the lungs after ingestion presents an aspiration hazard.
Cumene and cumene hydroperoxide have distinct hazards. The hydroperoxide is a reactive organic peroxide whose decomposition can release substantial heat. In industrial equipment, inadequate heat removal or contamination can contribute to thermal runaway.
Released cumene can evaporate from exposed surfaces. Its low water solubility does not prevent contamination of soil or groundwater, particularly near petroleum or chemical-handling facilities. Environmental persistence depends on conditions such as oxygen availability, microbial activity, and whether the material is present as dissolved contamination or as a separate organic liquid phase.