A copolymer is a polymer derived from more than one species of monomer. Its macromolecules contain chemically distinct monomer-derived units joined through covalent bonds. Copolymerization allows properties such as flexibility, toughness, chemical resistance, adhesion, and solubility to be adjusted by changing both the proportions of these units and their arrangement. Copolymers include major industrial rubbers, packaging plastics, adhesives, membranes, and materials designed to assemble into nanoscale structures.
Definition and terminology
A polymer derived from a single monomer species is a homopolymer; one derived from two or more monomer species is a copolymer. A copolymer derived from three monomer species is often called a terpolymer. “Heteropolymer” is sometimes used as a synonym for copolymer, especially in discussions of biological macromolecules.
A monomer-derived unit is the portion of a polymer structure contributed by a monomer molecule during polymerization. It need not retain every atom or bond of the starting monomer, because polymerization can involve bond rearrangements or the elimination of small molecules. Nor must an individual monomer-derived unit coincide with the smallest repeating unit of a regular chain: an alternating copolymer, for example, may have a repeating unit that contains contributions from two different monomers.
A copolymer differs from a polymer blend, which is a physical mixture of polymers. In a copolymer, different monomer-derived units belong to the same covalently connected macromolecular structure. In a blend, the different polymers need not be chemically linked. Commercial materials may contain both copolymers and blended components.
Classification by sequence and architecture
Composition alone does not fully describe a copolymer. Two materials containing the same overall proportions of units A and B can behave very differently if those units are arranged differently.
Statistical and random copolymers
In a statistical copolymer, the sequence of monomer-derived units follows a statistical law. The probability of incorporating a particular unit may depend on the identity of the preceding unit or on a longer local sequence.
A random copolymer, in the strict sense, is a statistical copolymer in which the probability of finding a particular unit at a position is independent of adjacent units. Its sequence can therefore be described by Bernoullian statistics. Industrial usage often employs “random” more broadly for copolymers lacking deliberately formed blocks or a regular alternating sequence.
A schematic irregular sequence is:
Alternating copolymers
An alternating copolymer contains two types of monomer-derived units in an alternating sequence:
Alternation can result when addition of the unlike monomer is strongly favored over addition of the like monomer. Styrene and maleic anhydride are a well-known monomer pair with a strong tendency toward alternating incorporation under suitable conditions.
Block copolymers
A block copolymer contains distinct chain segments, or blocks, with different compositions or sequence characteristics. Common architectures include:
- Diblock: A–B.
- Triblock: A–B–A or A–B–C.
- Multiblock: several chemically distinct blocks connected in sequence.
The letters represent extended segments rather than individual units. A block can itself be a copolymer rather than a homopolymer.
Blocks with different physical characteristics can provide different functions within one material. For example, glassy end blocks can form rigid domains that connect rubbery middle blocks into a physically associated network.
Graft copolymers
A graft copolymer has side chains whose constitution or configuration differs from that of the main chain. One polymer may form the backbone while another forms branches attached at selected sites.
Graft architecture is important in impact-resistant plastics and in materials that improve adhesion between otherwise poorly compatible polymers. Block and graft are architectural descriptions; they can coexist with statistical or other sequence patterns within individual segments.
Gradient and sequence-controlled copolymers
In a gradient copolymer, local composition changes progressively along the chain. A chain may be rich in A near one end and increasingly rich in B toward the other. Such gradients can arise from changing monomer concentrations during synthesis or from deliberate control of monomer feeding.
Sequence-controlled copolymers have deliberately regulated unit sequences, although the degree of precision varies. Control can range from preferential placement of particular units to an exact prescribed sequence. Proteins and DNA illustrate the functional importance of sequence in biological polymers; comparable precision in long synthetic chains remains more difficult to achieve.
Formation and reaction kinetics
Copolymers can be made through chain-growth polymerization, step-growth polymerization, and related processes. Relevant mechanisms include free-radical, ionic, coordination, and ring-opening polymerization. The suitable method depends on monomer chemistry and the desired architecture.
In chain-growth copolymerization, growing chain ends add monomers from a mixture. The composition incorporated into the polymer generally differs from the composition of that mixture because different addition reactions have different rates.
Reactivity ratios
For a binary copolymerization described by the terminal model, the reactivity of a chain end depends only on its terminal monomer-derived unit. Four propagation rate constants describe addition of monomers 1 and 2 to ends of types 1 and 2. The reactivity ratios are
where is the propagation rate constant for a chain ending in unit adding monomer .
If and are monomer mole fractions in the reacting mixture, the instantaneous mole fraction of units derived from monomer 1 in newly formed copolymer is given by the Mayo–Lewis equation:
When both reactivity ratios are small, cross-addition is favored and the sequence tends toward alternation. When both equal one, each chain end selects between monomers according to their proportions in the mixture, giving ideal random incorporation under the model’s assumptions.
The equation describes instantaneous incorporation, not necessarily the average composition of all polymer produced. If one monomer is consumed faster, the remaining mixture changes composition, causing composition drift. Consequently, chains formed at different times—and different portions of a chain grown over time—can have different compositions.
This treatment is an approximation within chemical kinetics. Penultimate-unit effects, reversible propagation, complex formation, and phase partitioning can require more elaborate models.
Architectural control
Statistical copolymers are often produced by polymerizing a monomer mixture. Block copolymers can be prepared by sequential monomer addition when chain ends remain capable of growth, or by coupling preformed segments.
Living polymerization and reversible-deactivation radical polymerization methods provide substantial control over chain length and block formation. Their applicability depends on monomer compatibility, reaction conditions, and competing reactions; they do not automatically produce perfectly uniform chains.
Graft copolymers can be synthesized by growing branches from a backbone, attaching preformed branches, or polymerizing monomers that already carry polymeric side chains.
Structure and physical properties
Copolymer properties depend on composition, sequence, architecture, molar mass, chain-length distribution, branching, and processing history.
Introducing a second monomer can disrupt regular chain packing and reduce crystallinity. This may increase flexibility or transparency, but can also reduce stiffness, melting temperature, or resistance to permeation. Conversely, suitable comonomers can increase rigidity, polarity, adhesion, or chemical resistance. There is no universal rule that copolymerization improves every property.
The glass transition is especially important. Some sufficiently mixed statistical copolymers exhibit a single composition-dependent glass transition. Copolymers containing distinct domains can display multiple transitions associated with different regions.
Microphase separation
Chemically dissimilar blocks may favor separation according to their thermodynamic interactions, but covalent connections prevent unrestricted separation into independent bulk phases. Instead, block copolymers can form nanoscale domains, a process called microphase separation.
Depending on block proportions, molecular architecture, interactions, and processing, these domains can form spheres, cylinders, lamellae, or more complex interconnected structures. For an idealized diblock melt, important parameters include the segregation strength , where is the Flory–Huggins interaction parameter and describes chain length, and the relative volume fractions of the blocks.
Copolymers containing both water-compatible and water-avoiding segments can also assemble in a selective solvent. In water, the hydrophobic effect can help drive formation of micelles, vesicles, and other aggregates.
Representative materials and applications
| Copolymer | Composition or architecture | Representative uses |
|---|---|---|
| Styrene–butadiene rubber | Commonly statistical styrene/butadiene copolymer | Tires and other rubber goods |
| Nitrile rubber | Acrylonitrile/butadiene copolymer | Oil-resistant seals, hoses, and gloves |
| Ethylene–vinyl acetate | Ethylene/vinyl acetate copolymer | Flexible films, foams, and hot-melt adhesives |
| Styrene–butadiene–styrene | Triblock copolymer with styrene end blocks and a butadiene middle block | Elastomeric adhesives, footwear, and asphalt modification |
| Ethylene–propylene–diene rubber | Terpolymer containing ethylene, propylene, and a diene | Weather-resistant seals, roofing membranes, and hoses |
| Styrene–acrylonitrile | Styrene/acrylonitrile copolymer | Rigid housings and household components |
Acrylonitrile–butadiene–styrene, or ABS, illustrates why a commercial name does not necessarily describe a simple three-monomer chain. Common ABS materials contain a rubber-rich phase with grafted styrene–acrylonitrile chains dispersed in a styrene–acrylonitrile matrix.
Copolymers also serve as compatibilizers in polymer blends, modifiers in coatings, and selective barriers in membranes. Block copolymers are studied and used as templates for nanoscale patterning, while amphiphilic copolymers provide structures for encapsulation and delivery applications.
Characterization
No single measurement fully establishes copolymer structure.
- Composition and local sequence: Nuclear magnetic resonance spectroscopy can identify monomer-derived units and, where signals are sufficiently resolved, distinguish neighboring pairs or longer sequences.
- Functional groups: Infrared spectroscopy helps identify chemical groups and monitor reactions.
- Molar mass and distribution: Size-exclusion chromatography separates dissolved chains mainly by hydrodynamic size. Composition-dependent chain conformation and detector response can complicate interpretation.
- Thermal behavior: Differential scanning calorimetry measures glass transitions, melting, and crystallization.
- Morphology: Microscopy and small-angle scattering methods reveal domain size and organization.
An overall composition measurement alone cannot distinguish a statistical copolymer from a block copolymer, or always distinguish a copolymer from a blend with the same bulk composition. Establishing architecture generally requires complementary evidence.
Historical development and limitations
Copolymerization became industrially important through synthetic rubber development, including styrene–butadiene and nitrile rubbers in the 1930s. Wartime demand greatly expanded synthetic-rubber production during World War II. Quantitative copolymerization theory advanced in the 1940s, including the Mayo–Lewis treatment published in 1944. Later developments in living and controlled polymerization expanded access to well-defined blocks, grafts, and more complex architectures.
Practical limitations include unequal monomer reactivity, composition drift, unwanted homopolymer formation, imperfect block junctions, and difficulty scaling precisely controlled syntheses. Multiphase morphology also depends on processing: solvent removal, cooling, shear, and annealing can produce different structures from the same nominal composition.
Copolymerization does not inherently make a material biodegradable or readily recyclable. Chemical stability, backbone structure, additives, contamination, and available recovery processes determine its end-of-life behavior. Complex compositions can complicate sorting and reprocessing, although selected copolymers can improve the compatibility of mixed-plastic streams.