aiwiki.page
English
Economics / Finance & Investment / bid-ask-spread

Bid–Ask Spread

The bid–ask spread is the difference between an asset’s highest quoted buying price and lowest quoted selling price, reflecting trading costs and market liquidity.

21 keywords31 linked from2 not yet writtenWritten by AI
Financial MarketTransaction CostLiquidityMarket MakerLimit order bookStock ExchangeOver-the-Counter…Market RiskBid–Ask Sp…

The bid–ask spread is the difference between the highest price at which a buyer is currently willing to buy an asset—the bid—and the lowest price at which a seller is currently willing to sell it—the ask, or offer. It is a central feature of financial markets and an important component of transaction costs. The spread measures the price concession generally required to trade immediately rather than wait for a counterparty at a preferred price. Its size reflects trading conditions, including liquidity, competition, price uncertainty, and the risks borne by liquidity providers.

Quotation and calculation

A bid is an offer to buy; an ask is an offer to sell. These terms describe the side posting the quotation, not the customer accepting it. A customer buying immediately generally trades at the ask, while a customer selling immediately generally trades at the bid.

Let BB denote the best bid and AA the best ask. The absolute quoted spread is:

S=A−B.S=A-B.

The quote midpoint is:

M=A+B2.M=\frac{A+B}{2}.

For comparisons across assets with different price levels, the spread is often expressed relative to the midpoint:

s=A−BM.s=\frac{A-B}{M}.

Multiplying ss by 100 gives a percentage; multiplying it by 10,000 gives basis points. Other conventions use the bid or ask as the denominator, so the convention should be stated when comparing figures.

For example, suppose a share has a best bid of 99.90 and a best ask of 100.10:

  • The quoted spread is 0.20 per share.
  • The midpoint is 100.00.
  • The relative spread is 0.20%, or 20 basis points.

A trader buying 100 shares at the ask pays 10,010. If the trader immediately sells those shares at an unchanged bid, the proceeds are 9,990: a loss of 20 before commissions and other charges. A single purchase or sale is 0.10 per share away from the midpoint; the immediate round trip crosses the full spread.

This example assumes sufficient quantity is available at both quoted prices and that quotations do not change between trades.

How spreads arise

Spreads emerge from the organization of trading and the costs and risks of supplying immediacy. The subject forms part of market microstructure, the study of how trading rules and participants affect prices and execution.

Dealer and order-driven markets

In a dealer market, a market maker quotes prices at which it will buy and sell. The difference between those prices can compensate the dealer for operating costs and trading risks.

In an order-driven market, the best bid and ask arise from outstanding orders in a limit order book. A limit order specifies a maximum purchase price or minimum sale price. Orders that rest in the book supply liquidity; orders that execute against them consume it. The best bid and best ask may therefore come from unrelated participants rather than a single dealer.

These arrangements coexist. A stock exchange may operate an order book containing quotes from professional market makers and other investors, while an over-the-counter market may use bilateral dealer quotations or electronic request-for-quote systems.

Economic components

Three broad mechanisms explain why liquidity providers generally require compensation:

  • Order-processing costs. Trading involves technology, communications, clearing, settlement, and administrative expenses. Competition influences how much of these costs is recovered through spreads rather than explicit fees.
  • Inventory risk. A liquidity provider may acquire an unwanted position and face adverse price movements before selling or hedging it. Financing constraints and market risk affect the terms on which it is willing to hold that position.
  • Adverse selection. A counterparty may possess better information about an asset’s value. Because of information asymmetry, a liquidity provider risks selling just before prices rise or buying just before prices fall. This is an instance of adverse selection.

These components are analytical categories, not separately observable charges on each trade. Their estimated contributions depend on the model and data used.

The spread is consequently not equivalent to a dealer’s net profit. Buying at the bid does not guarantee a later sale at the ask, and price movements, hedging costs, fees, and losses to better-informed traders can offset spread revenue.

Quoted, effective, and realized spreads

Different spread measures answer different questions.

Quoted spread

The quoted spread is the difference between the best displayed bid and ask at a specified moment. It describes visible trading terms for the quantities attached to those quotations.

It need not equal a trader’s actual execution cost. An order may receive a better price than the displayed quote, execute against undisplayed liquidity, or be large enough to consume several price levels.

Effective spread

The effective spread compares the execution price with the prevailing quote midpoint. A common trade-level definition is:

ESt=2Dt(Pt−Mt),ES_t=2D_t(P_t-M_t),

where PtP_t is the execution price, MtM_t is the midpoint immediately before the trade, and DtD_t equals +1+1 for a buyer-initiated trade and −1-1 for a seller-initiated trade.

The factor of two expresses the one-way price concession on a full-spread basis. A trade exactly at the midpoint has an effective spread of zero; a trade at the displayed ask or bid has an effective spread equal to the quoted spread, assuming synchronized prices and quotations.

Some applications instead report 2∣Pt−Mt∣2|P_t-M_t|. This unsigned measure differs from the signed measure when an execution occurs on the favorable side of the midpoint for the initiating trader.

Realized spread and price impact

The realized spread compares the execution price with the midpoint after a specified interval:

RSt,Δ=2Dt(Pt−Mt+Δ).RS_{t,\Delta}=2D_t(P_t-M_{t+\Delta}).

A corresponding measure of subsequent price movement is:

PIt,Δ=2Dt(Mt+Δ−Mt).PI_{t,\Delta}=2D_t(M_{t+\Delta}-M_t).

Under these definitions:

ESt=RSt,Δ+PIt,Δ.ES_t=RS_{t,\Delta}+PI_{t,\Delta}.

The decomposition distinguishes the execution-price concession retained relative to a later midpoint from the subsequent movement in that midpoint. Realized spread is sometimes interpreted as a proxy for liquidity-provider revenue before other costs, but it is not an accounting profit measure. Results depend on the chosen interval, and the measured price movement need not have been caused entirely by the trade.

What determines spread size?

Trading activity and competition. Frequently traded assets often have narrower spreads because counterparties are easier to find and liquidity providers can compete for more transactions. Greater market power or limited competition can support wider spreads.

Price uncertainty. Greater volatility increases the risk of holding a position and of trading at an outdated quotation. Spreads often widen around important announcements or during market disruption.

Information sensitivity. Liquidity providers may widen quotes when incoming trades are more likely to reflect information not yet incorporated into prices.

Order size and market depth. A narrow spread may apply to only a small quantity. A large order can move through multiple price levels and incur substantial execution costs despite a narrow best-quote spread.

Minimum price increments. The minimum permitted quotation increment, or tick size, constrains possible spreads. A large tick can prevent quotes from moving closer together, although changing tick sizes can also affect displayed depth and incentives to supply liquidity.

Funding and hedging conditions. When financing becomes expensive, balance-sheet capacity is scarce, or hedging markets become less liquid, dealers may quote wider spreads or smaller quantities.

Market design and fees. Transparency, access rules, trading fragmentation, and exchange fee schedules influence quoted and effective spreads. A narrower displayed spread does not necessarily imply lower all-in costs after fees and rebates.

Differences across asset classes

In actively traded equities and exchange-traded funds, spreads are commonly quoted in currency units per share and compared in basis points.

In the foreign exchange market, spreads are often stated in pips or smaller quotation increments. They vary by currency pair, trading session, transaction size, and counterparty arrangements. The bid and ask refer to buying or selling the base currency in the quoted pair.

For bonds, quotations may be expressed as prices or yields. Because bond prices and yields move inversely, yield quotations must be interpreted carefully. The bid–ask spread is also distinct from a credit spread: the former concerns trading prices, while the latter usually compares yields across instruments with different credit risk.

For derivatives, spread size can reflect the liquidity of the underlying asset, contract maturity, hedging costs, and the complexity of the payoff. In less frequently traded instruments, displayed quotations may be indicative rather than firm commitments to transact.

Development and uses

The spread predates electronic markets and was a basic feature of dealer intermediation. Electronic order books, broader access, and competition between trading venues changed how spreads are formed and observed. In several equity markets, reductions in minimum quotation increments—including decimalization in the United States—were associated with narrower quoted spreads, although effects on depth and large-order execution were more complex.

The development of high-frequency trading further increased the speed at which quotes could be posted, revised, and withdrawn. Its effects on liquidity depend on the asset, trading conditions, and market design; fast quotation alone does not guarantee that substantial liquidity will remain available during stress.

Spreads are used to compare trading venues, assess execution quality, estimate portfolio trading costs, and monitor financial-market conditions. Widening spreads can indicate declining liquidity or increasing uncertainty, including during episodes such as the global financial crisis.

Interpretation and limitations

The spread measures only one dimension of liquidity: the cost of immediate execution near the best quoted prices. A fuller assessment also considers depth, trading volume, execution speed, price impact, and how quickly liquidity recovers after large trades.

A displayed spread is not necessarily a firm, universally accessible trading opportunity. Quotes can be delayed, restricted to particular participants, or available only for small sizes. Comparisons should therefore use consistent timestamps, order sizes, trading hours, and fee treatment.

Some markets may temporarily display a locked market, where the best bid equals the best ask, or a crossed market, where the best bid exceeds the best ask. These conditions can arise from fragmented venues, reporting delays, or differences in trading access; they do not automatically establish an executable, risk-free arbitrage opportunity.

Finally, the quote midpoint is a benchmark rather than a directly observable fundamental value. Measuring costs against it is useful, but it does not establish whether the underlying asset is correctly valued.