The Auger effect is a nonradiative process in which an atom or another electronic system relaxes from a state containing an inner-shell vacancy by ejecting an electron. An electron from a less tightly bound state fills the vacancy, and the released energy is transferred through electron–electron interaction to another electron, which escapes as an Auger electron. Unlike radiative relaxation, the process does not emit a photon in that transition. Auger electron energies are characteristic of the electronic states involved, making the effect an important basis for surface chemical analysis.
Physical mechanism
An inner-shell vacancy, often called a core hole, can be created when an incident electron, an X-ray photon, or another energetic particle removes a tightly bound electron. Certain radioactive decay processes can also leave an atom with such a vacancy. The resulting electronic configuration is excited and can relax through competing pathways.
In a radiative transition, an electron fills the vacancy and the energy difference is emitted as a photon, often a characteristic X-ray. In an Auger transition, the energy instead ejects a second electron. This is possible only if sufficient energy is available to place that electron in an unbound state.
For an initially neutral, isolated atom that first loses a core electron, a subsequent ordinary Auger transition leaves a doubly charged positive ion with two electronic vacancies. Those vacancies can undergo further relaxation, producing a cascade of additional electrons and photons. In a solid, surrounding electrons can replenish vacancies, so the local charge state also depends on charge transport and the material’s environment.
The familiar account in which one electron falls inward and “passes” energy to another is useful bookkeeping. In quantum mechanics, however, the Auger transition is a transition between many-electron states, driven by their electron–electron Coulomb interaction. It does not require a real photon to be emitted and subsequently absorbed within the atom.
Electron energies and transition notation
The kinetic energy of an Auger electron follows from energy conservation. For an isolated system, neglecting recoil,
where is the energy of the initial core-ionized system and is the energy of the residual system after emission, with the free electron’s zero of kinetic energy defined consistently.
A commonly used approximate shell-energy expression is
where denotes the initial vacancy, the state supplying the electron that fills it, and the state from which the Auger electron is emitted. The terms represent positive binding energies.
This expression is an estimate, not an exact subtraction of three independently measured neutral-atom binding energies. The final state contains two interacting vacancies, and electronic relaxation, screening, and chemical bonding change its energy. In solids, the reference energy and the surface escape barrier must also be treated consistently.
Transitions are conventionally labeled by the shells involved:
- KLL: a K-shell vacancy is filled by an L-shell electron, while another L-shell electron is emitted.
- LMM: an L-shell vacancy is filled by an M-shell electron, while another M-shell electron is emitted.
- KLM: a K-shell vacancy is filled from the L shell, with emission from the M shell.
The K, L, and M shells correspond to principal quantum numbers , , and . More detailed labels specify subshells and distinguish transitions affected by spin and orbital coupling.
For an ordinary Auger transition involving the same initial and final states, the emitted electron’s energy is largely independent of the energy used to create the core hole. Extra incident energy generally appears elsewhere, such as in the kinetic energy of the initially ejected electron. This distinguishes Auger peaks from photoelectron peaks, whose kinetic energies shift when the exciting photon energy changes.
Competition with radiative decay
A core vacancy can decay through both radiative and nonradiative channels. Their relative probabilities depend on the atomic number, the shell containing the vacancy, and the available electronic states.
For many inner-shell vacancies in light elements, Auger emission is more probable than characteristic X-ray emission. For comparable deep-shell vacancies in heavier elements, radiative decay becomes increasingly competitive. There is no single branching ratio that applies to every shell or charge state.
If the total radiative decay rate is and the total nonradiative rate is , the fluorescence yield is
The complementary fraction describes nonradiative relaxation when these rates include all relevant channels. Nonradiative channels may include several kinds of Auger-related transition.
The finite lifetime of the core-hole state also contributes to the natural width of spectral lines. Additional broadening can arise from unresolved final states, solid-state interactions, and instrumental resolution.
Related processes
Coster–Kronig transitions
A Coster–Kronig transition is a special nonradiative transition in which the initial vacancy and the electron filling it belong to different subshells of the same principal shell. If the emitted electron also originates in that principal shell, the process is called a super-Coster–Kronig transition. These channels can strongly influence vacancy redistribution and emission intensities.
Resonant Auger emission
In resonant Auger emission, a photon excites a core electron into an unoccupied bound state rather than directly removing it. The resulting excited state then decays by electron emission.
The excited electron may remain as a spectator or participate in the decay. The resulting spectra provide information about unoccupied states, electronic interactions, and charge-transfer dynamics. Because the initial excitation differs from ordinary core ionization, resonant emission need not show the same simple independence from incident photon energy.
Auger recombination
Auger recombination is a related nonradiative process in a semiconductor. An electron recombines with an electron hole, transferring energy to another electron or hole rather than producing a photon. It is not ordinarily a core-vacancy decay, but it shares the central mechanism of transferring electronic relaxation energy to another charge carrier.
Distinction from internal conversion
Internal conversion is a nuclear process: an excited atomic nucleus transfers energy directly to an atomic electron, ejecting it. An Auger transition instead draws its energy from electronic relaxation. Internal conversion can create a core vacancy that subsequently produces Auger electrons, so both processes may occur in one decay sequence.
Auger electron spectroscopy
Auger electron spectroscopy measures the energy distribution of emitted Auger electrons to identify elements and investigate surface composition. Core vacancies are commonly created using a focused electron beam, although photon excitation is also possible.
Its principal features include:
- Elemental identification. Characteristic transition energies provide fingerprints for many elements. Hydrogen and helium do not produce the conventional core-level Auger signatures used in routine analysis.
- Surface sensitivity. Electrons in the energy range commonly measured undergo substantial inelastic scattering in solids. Electrons retaining their characteristic energies therefore usually originate within the outermost few nanometres, with the precise information depth depending on energy, material, and collection geometry.
- Spatially resolved analysis. A focused electron beam can map composition across small surface features.
- Sensitivity to chemical environment. Peak shifts and line shapes can reveal changes in bonding and oxidation state, although interpretation may require reference spectra or calculations.
Applications include examining thin films, contamination, oxidation, interfaces, fracture surfaces, and semiconductor structures. Combining spectra with ion sputtering allows depth profiling, though sputtering can alter the composition and structure being measured.
Interpretation and limitations
Auger peak intensities are not determined by elemental concentration alone. They also depend on ionization probabilities, transition probabilities, electron attenuation, instrument transmission, and measurement geometry. Quantitative analysis therefore uses sensitivity factors, standards, or physical models.
Important complications include overlapping peaks, inelastic backgrounds, surface roughness, contamination, and electron-beam damage. Electrically insulating specimens can charge during measurement, shifting or distorting spectra. Preferential sputtering, ion-induced mixing, and roughening can introduce artifacts in depth profiles.
Auger spectra also encode more than isolated-atom shell energies. In solids, screening and band structure affect final states and line shapes. Consequently, a peak’s position or intensity cannot always be interpreted uniquely without additional information.
Historical development
Lise Meitner described nonradiative electron emission associated with atomic vacancy relaxation in 1922. Pierre Auger independently investigated the effect in 1923 using cloud-chamber observations of electrons produced during X-ray interactions. The phenomenon became widely known under Auger’s name; “Auger–Meitner effect” is also used to acknowledge Meitner’s earlier contribution.
Its development into a practical surface-analysis method followed advances in electron-energy analyzers, ultrahigh-vacuum instrumentation, and focused electron beams. Auger spectroscopy subsequently became an established technique in analytical chemistry and surface science.