An Archimedean solid is one of thirteen convex polyhedra whose faces are regular polygons of at least two different types and whose vertices are all equivalent under the solid’s symmetries. The five Platonic solids, which have only one type of face, and the infinite families of regular prisms and antiprisms are excluded. Named after Archimedes, the Archimedean solids form a central class in the study of highly symmetric three-dimensional shapes.
Definition and scope
The defining conditions combine geometric regularity with global symmetry:
- Convexity: the solid, including its interior, is a convex set.
- Regular faces: each face is a regular polygon, with equal sides and equal angles.
- More than one face type: at least two different numbers of sides occur among the faces.
- Vertex transitivity: for any two vertices, a symmetry of the entire solid maps one to the other.
- Exclusion of prisms and antiprisms: these are treated as separate infinite families.
A symmetry here is an isometry that maps the solid onto itself. Vertex transitivity is therefore stronger than merely requiring the same number and types of polygons to meet at each vertex.
Together with the Platonic solids and regular prisms and antiprisms, Archimedean solids make up the convex uniform polyhedra. Some definitions of “Archimedean polyhedron” include the prism and antiprism families, but the conventional list of Archimedean solids contains thirteen.
The expression semiregular polyhedron is often used for this class, though its meaning varies between authors. In particular, a definition based only on identical arrangements of regular faces at vertices can admit an additional solid that is not vertex-transitive.
The thirteen solids
A vertex configuration records, in cyclic order, the numbers of sides of the faces meeting at a vertex. For example, means that triangles and squares alternate. Exponents indicate repeated entries: means four triangles and one square.
In the table, , , and denote the numbers of vertices, edges, and faces.
| Solid | Vertex configuration | Faces by type | |||
|---|---|---|---|---|---|
| Truncated tetrahedron | 4 triangles, 4 hexagons | 12 | 18 | 8 | |
| Cuboctahedron | 8 triangles, 6 squares | 12 | 24 | 14 | |
| Truncated cube | 8 triangles, 6 octagons | 24 | 36 | 14 | |
| Truncated octahedron | 6 squares, 8 hexagons | 24 | 36 | 14 | |
| Rhombicuboctahedron | 8 triangles, 18 squares | 24 | 48 | 26 | |
| Truncated cuboctahedron | 12 squares, 8 hexagons, 6 octagons | 48 | 72 | 26 | |
| Snub cube | 32 triangles, 6 squares | 24 | 60 | 38 | |
| Icosidodecahedron | 20 triangles, 12 pentagons | 30 | 60 | 32 | |
| Truncated dodecahedron | 20 triangles, 12 decagons | 60 | 90 | 32 | |
| Truncated icosahedron | 12 pentagons, 20 hexagons | 60 | 90 | 32 | |
| Rhombicosidodecahedron | 20 triangles, 30 squares, 12 pentagons | 60 | 120 | 62 | |
| Truncated icosidodecahedron | 30 squares, 20 hexagons, 12 decagons | 120 | 180 | 62 | |
| Snub dodecahedron | 80 triangles, 12 pentagons | 60 | 150 | 92 |
The truncated cuboctahedron and truncated icosidodecahedron are also called the great rhombicuboctahedron and great rhombicosidodecahedron, respectively. Their smaller counterparts may consequently be called the small rhombicuboctahedron and small rhombicosidodecahedron.
The snub cube and snub dodecahedron each have two mirror-image forms. Conventionally, each mirror-image pair counts as one solid, giving thirteen types. If the two handed forms are counted separately, there are fifteen.
Geometric and combinatorial constraints
Face angles and positive curvature
Suppose faces meet at a vertex, with side counts . The interior angle of a regular -gon is
At a vertex of a convex polyhedron, the sum of the face angles is strictly less than . Consequently,
This sharply limits the possible vertex configurations. Since every face angle is at least , no more than five faces can meet at a convex vertex. Six equilateral triangles, for example, fill a flat angle of and cannot form such a vertex.
The difference between and the sum of the face angles is the vertex’s angular defect. For a convex polyhedron, the defects sum to . Vertex transitivity makes the defect equal at every vertex.
Counting vertices, edges, and faces
The Euler characteristic gives
If every vertex has incident edges, counting edge endpoints yields
Counting face–vertex incidences gives
Combining these relations produces
For the truncated icosahedron, whose vertex configuration is ,
It follows that and .
These equations are necessary consistency checks, not a complete classification procedure. A proposed local arrangement must also extend to a closed, convex polyhedron with the required global symmetry.
Construction from Platonic solids
Many Archimedean solids can be understood through operations on Platonic solids.
Truncation
Truncation cuts off vertices with planes. Each original vertex becomes a new face, while the original faces acquire additional sides.
At a suitable cutting depth, truncating a tetrahedron, cube, octahedron, dodecahedron, or icosahedron produces the corresponding Archimedean truncated solid. The cutting depth matters: an arbitrary truncation generally does not produce regular faces.
For instance, uniform truncation of an icosahedron replaces its twelve vertices with pentagons and turns its twenty triangular faces into hexagons. The result is the truncated icosahedron.
Rectification
Rectification cuts back the vertices until the cutting planes reach the midpoints of the original edges. The new vertices correspond to those edge midpoints.
Rectifying either a cube or an octahedron produces the cuboctahedron. Rectifying either a dodecahedron or an icosahedron produces the icosidodecahedron. These shared outcomes reflect the dual relationships between the original Platonic solids.
Expansion and snub constructions
The rhombicuboctahedron and rhombicosidodecahedron can be described by moving the faces of a Platonic solid outward and filling the intervening gaps with additional regular faces.
Snub constructions combine displacement and rotation of faces with the insertion of triangles. The resulting snub cube and snub dodecahedron possess handedness: reversing the direction of the construction produces the mirror-image form.
Such operations are geometric descriptions, not arbitrary deformations. Their parameters must be chosen so that the resulting edges have equal lengths and every face remains regular.
Symmetry and handedness
The symmetries of each solid form a group, acting on its vertices, edges, and faces. Vertex transitivity means that the vertices constitute a single orbit under this group action.
The thirteen solids fall into three broad symmetry families:
- Tetrahedral: the truncated tetrahedron.
- Octahedral: the cuboctahedron, truncated cube, truncated octahedron, rhombicuboctahedron, truncated cuboctahedron, and snub cube.
- Icosahedral: the icosidodecahedron, truncated dodecahedron, truncated icosahedron, rhombicosidodecahedron, truncated icosidodecahedron, and snub dodecahedron.
All except the two snub solids have reflection symmetries. Each snub solid has rotational symmetries but no orientation-reversing symmetry. Its two mirror images cannot be superimposed by rotations and translations alone.
Vertex transitivity does not imply that all edges or all faces are equivalent. Faces with different numbers of sides necessarily belong to different symmetry orbits, and edges can also occur in distinct orbits.
Duals and related polyhedra
Under polyhedral duality, faces and vertices exchange roles while edges correspond to edges. The duals of the thirteen Archimedean solids are the thirteen Catalan solids.
Because an Archimedean solid is vertex-transitive, its dual is face-transitive: every face can be mapped to every other face by a symmetry. These dual faces are generally not regular polygons. For example, the dual of the cuboctahedron is the rhombic dodecahedron, whose faces are congruent rhombi.
A crucial boundary case is the elongated square gyrobicupola, also called the pseudorhombicuboctahedron. Like the rhombicuboctahedron, it has eight triangular faces, eighteen square faces, and local vertex configuration . Nevertheless, its vertices are not all related by symmetries of the whole solid. It is therefore excluded under the vertex-transitive definition and instead belongs to the Johnson solids.
This example shows why an identical arrangement of face types at every vertex is not, by itself, sufficient to characterize the Archimedean solids.
Historical development
The class is named after Archimedes, who studied these solids in the third century BCE. His treatment has not survived. Knowledge of his enumeration comes from the later account of Pappus of Alexandria, who described thirteen solids bounded by regular polygons of more than one kind.
During the Renaissance, regular-faced polyhedra attracted renewed interest among artists and mathematicians investigating perspective and geometric form. Johannes Kepler presented the complete conventional collection in Harmonices Mundi in 1619 and treated prisms and antiprisms as separate families.
The ancient classification preceded the modern language of symmetry groups. Contemporary definitions use vertex transitivity to state precisely the global uniformity that distinguishes the Archimedean solids from locally similar but less symmetric polyhedra.
Applications and models
Archimedean solids provide standard examples in geometry, combinatorics, and graph theory. Their edge graphs offer highly structured examples for studying symmetry, connectivity, and planar embeddings.
The truncated icosahedron is especially familiar as the idealized panel arrangement of a traditional association football: twelve pentagons and twenty hexagons. An inflated ball has curved panels and an approximately spherical surface, rather than the planar faces of an exact polyhedron.
The same vertex-and-edge pattern describes the carbon framework of the molecule, buckminsterfullerene. The correspondence concerns connectivity and overall symmetry; it does not mean that the molecular structure has planar regular faces or that all its carbon–carbon bonds have identical lengths.
Archimedean forms are also used in architectural models, sculpture, and geometric construction systems. In these settings, their mathematical names describe ideal forms; physical structures may approximate their regularity or use only their underlying arrangement of vertices and edges.