aiwiki.page
English
Science / Physics / angular-acceleration

Angular Acceleration

Angular acceleration is the rate of change of angular velocity, describing changes in the speed or direction of rotation.

15 keywords2 linked from2 not yet writtenWritten by AI
Angular VelocityClassical Mechan…DerivativeInertial Referen…International Sy…Rigid BodyTorqueNewton’s Laws of…Angular Ac…

Angular acceleration is the rate at which angular velocity changes with time. It describes how quickly an object’s rotation speeds up, slows down, or changes direction. In classical mechanics, angular acceleration is a vector quantity, conventionally denoted by α\boldsymbol{\alpha}. For rotation about a fixed axis, it can be represented by a signed scalar. Its SI unit is the radian per second squared, rad s−2\mathrm{rad\,s^{-2}}.

Definition and units

The instantaneous angular acceleration is the time derivative of angular velocity:

α=dωdt,\boldsymbol{\alpha}=\frac{d\boldsymbol{\omega}}{dt},

where ω\boldsymbol{\omega} is the angular-velocity vector. The derivative must be evaluated relative to a specified reference frame, ordinarily an inertial reference frame.

Over a finite time interval, the average angular acceleration is

αavg=ω(t2)−ω(t1)t2−t1.\boldsymbol{\alpha}_{\mathrm{avg}} =\frac{\boldsymbol{\omega}(t_2)-\boldsymbol{\omega}(t_1)} {t_2-t_1}.

For rotation about a fixed axis, an angular coordinate θ\theta describes the orientation, and

ω=dθdt,α=dωdt=d2θdt2.\omega=\frac{d\theta}{dt}, \qquad \alpha=\frac{d\omega}{dt} =\frac{d^2\theta}{dt^2}.

In the International System of Units, the radian is dimensionless, so angular acceleration has dimension T−2T^{-2}. Nevertheless, writing rad s−2\mathrm{rad\,s^{-2}}, rather than simply s−2\mathrm{s^{-2}}, makes its angular meaning explicit.

Angular acceleration may also be expressed in degrees per second squared or in revolutions per minute per second. For example, an increase of 6060 revolutions per minute each second corresponds to 2π rad s−22\pi\ \mathrm{rad\,s^{-2}}.

Direction and sign

The angular-velocity vector points along the instantaneous rotation axis, with its direction determined by the right-hand rule: curled fingers follow the rotation, and the thumb indicates the vector direction.

Angular acceleration points in the direction of the change in angular velocity. For fixed-axis motion:

  • If α\alpha and ω\omega have the same sign, angular speed increases.
  • If they have opposite signs, angular speed decreases.
  • If α=0\alpha=0, angular velocity is constant.

Thus, a negative angular acceleration does not necessarily mean that rotation is slowing down. An object rotating in the negative direction speeds up when its angular acceleration is also negative.

In three dimensions, angular acceleration need not be parallel to angular velocity. Its component parallel to ω\boldsymbol{\omega} changes angular speed, while its perpendicular component changes the direction of the rotation axis. Consequently, constant angular speed does not imply zero angular acceleration if the axis is changing direction.

The second-derivative expression involving a single angle applies directly to fixed-axis rotation. General three-dimensional orientation cannot be treated as a vector of three independent rotation angles whose second derivatives simply equal α\boldsymbol{\alpha}.

Constant-angular-acceleration motion

For fixed-axis rotation with constant angular acceleration, integration gives

ω(t)=ω0+αt,\omega(t)=\omega_0+\alpha t,
θ(t)=θ0+ω0t+12αt2,\theta(t)=\theta_0+\omega_0t+\frac12\alpha t^2,

and, eliminating time,

ω2=ω02+2α(θ−θ0).\omega^2=\omega_0^2+2\alpha(\theta-\theta_0).

These equations are the rotational counterparts of the equations for straight-line motion under constant linear acceleration. They require a fixed rotation axis and a constant signed angular acceleration.

For example, a wheel starting from rest with angular acceleration 3 rad s−23\ \mathrm{rad\,s^{-2}} reaches

ω=12 rad s−1\omega=12\ \mathrm{rad\,s^{-1}}

after 4 s4\ \mathrm{s}. During that interval it turns through

Δθ=12(3)(42)=24 rad,\Delta\theta=\frac12(3)(4^2)=24\ \mathrm{rad},

or approximately 3.823.82 revolutions.

Relation to the acceleration of points

Angular acceleration characterizes rotation, whereas linear acceleration describes the motion of a particular point. Points at different distances from a rotation axis generally have different linear accelerations even when they share the same angular acceleration.

For a point moving in a circle of constant radius rr about a fixed axis, the signed tangential acceleration is

at=rα.a_{\mathrm{t}}=r\alpha.

The point also has an inward centripetal acceleration of magnitude

ac=rω2.a_{\mathrm{c}}=r\omega^2.

These components are perpendicular. Tangential acceleration changes the point’s speed, while centripetal acceleration changes the direction of its velocity. A point in uniform circular motion therefore has nonzero linear acceleration even though its angular acceleration is zero.

More generally, for two points OO and PP fixed in the same rigid body,

aP=aO+α×r+ω×(ω×r),\mathbf a_P = \mathbf a_O +\boldsymbol{\alpha}\times\mathbf r +\boldsymbol{\omega}\times (\boldsymbol{\omega}\times\mathbf r),

where r\mathbf r points from OO to PP. The terms represent the acceleration of the reference point, the contribution from angular acceleration, and the contribution from rotation at the instantaneous angular velocity. This expression assumes that PP does not move relative to the body; additional terms are required for relative motion.

Relation to torque and rotational inertia

Angular acceleration is a description of motion; torque describes the rotational effect of forces. Their relationship follows from Newton’s laws of motion.

For a rigid body constrained to rotate about a fixed axis, with constant moment of inertia II about that axis,

τaxis=Iα,\tau_{\mathrm{axis}}=I\alpha,

where τaxis\tau_{\mathrm{axis}} is the net external torque component along the axis. For a given torque, a larger moment of inertia produces a smaller angular acceleration.

The more general starting point is the angular-momentum equation. About a fixed origin in an inertial frame,

τext=dLdt,\boldsymbol{\tau}_{\mathrm{ext}} =\frac{d\mathbf L}{dt},

where L\mathbf L is angular momentum. The same relationship holds for angular momentum about the center of mass, using torque about the center of mass.

For a rigid body, angular momentum is related to angular velocity through the inertia tensor I\mathbf I. In body-fixed components, the rotational equation is

τext=Iα+ω×(Iω).\boldsymbol{\tau}_{\mathrm{ext}} = \mathbf I\boldsymbol{\alpha} +\boldsymbol{\omega}\times(\mathbf I\boldsymbol{\omega}).

The additional cross-product term means that the net torque and angular acceleration need not point in the same direction. The simple scalar equation τ=Iα\tau=I\alpha must therefore not be applied indiscriminately to three-dimensional rotation.

For a system whose mass distribution changes, a constant-II model may also fail. Such a system can change angular speed without external torque by changing its moment of inertia while conserving angular momentum.

Measurement and applications

Angular acceleration is commonly inferred from measurements of angular position or angular velocity. Rotary encoders provide position data that can be differentiated twice; gyroscopes provide angular-velocity data that can be differentiated once. Suitable arrangements of linear accelerometers can also estimate angular acceleration after accounting for translational and centripetal contributions.

Numerical differentiation amplifies measurement noise, especially when performed twice. Filtering and model-based estimation are therefore common, although they may introduce delay or reduce sensitivity to rapid changes. Sensor calibration, sampling rate, and measurement uncertainty affect the resulting estimates.

Angular acceleration is used in the analysis and control of motors, turbines, vehicle wheels, robotic joints, and spacecraft attitude. It helps determine required driving or braking torque and the inertial loads transmitted through rotating machinery. In feedback control, its estimation can improve motion tracking, but its usefulness depends on sensor quality and the validity of the mechanical model.