{
  "id": "heat",
  "title": "热量",
  "lang": "zh-Hans",
  "source_lang": "en",
  "summary": "热量是因温度差而在系统之间传递的能量，而非物体内部储存的某种属性。",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "热"
  ],
  "generated_at": "2026-10-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/zh/heat/",
  "translations": {
    "en": {
      "url": "https://aiwiki.page/en/heat/",
      "json": "https://aiwiki.page/en/heat.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "热量是因温度差而在系统之间传递的能量。在热力学中，它描述的是穿过系统边界的能量，而不是某种物质，也不是物体内部所含的某个量。热量不同于表征系统微观能量的内能，也不同于另一种能量传递方式——功。自发的净热传递总是从高温处流向低温处。传递的热量通常用 \\(Q\\) 表示，以焦耳为单位。(openstax.org)"
    },
    {
      "heading": "热量、温度与平衡",
      "text": "温度描述物体的冷热状态；热量则描述物体之间，或系统与其环境之间的相互作用。因此，温度高并不意味着具有某个确定的热量。使温度发生特定变化所需的能量，取决于材料、材料的量以及加热时的条件。温度相同的两个物体，其内能可能相差很大。(openstax.org)\n\n当温度不同的物体能够以热传递的方式交换能量时，它们的温度会趋于相等。达到热平衡后，物体之间不再发生净热传递。热力学第零定律确立了热平衡关系的一致性：如果两个系统分别与第三个系统处于热平衡，那么这两个系统彼此也处于热平衡。这为温度测量提供了基础。(openstax.org)"
    },
    {
      "heading": "能量收支与过程依赖性",
      "text": "热力学第一定律表达了能量守恒。对于整体动能和势能变化可以忽略的封闭系统，有\n\n\\[\\Delta U=Q-W,\\]\n\n其中，\\(\\Delta U\\) 是内能的变化，\\(Q\\) 是进入系统的热量，\\(W\\) 是系统对外所做的功。按照这一约定，流出系统的热量和外界对系统所做的功均取负值。也可以采用其他符号约定，因此必须明确说明正负号的含义。(openstax.org)\n\n内能是状态函数：其变化只取决于初态和终态。热量和功则取决于连接这两个状态的具体过程。因此，并不存在一个普遍适用的“含热量”，使其变化等于 \\(Q\\)。采用微分记号时，这一区别通常表示为\n\n\\[dU=\\delta Q-\\delta W,\\]\n\n其中，\\(\\delta\\) 表示依赖于过程的能量传递。(openstax.org)\n\n绝热过程中没有热量交换，但温度仍可因做功而发生变化。压缩隔热的气体就说明了为什么加热与温度升高不是等同的概念。(ocw.mit.edu)"
    },
    {
      "heading": "热传递机制",
      "text": "三种主要机制是热传导、对流和热辐射。它们可以同时发生。热传导通过微观相互作用传递能量，不需要物质发生宏观运动。对流涉及流体的运动，既可以是浮力驱动的循环，也可以是外部作用引起的流动。热辐射通过电磁辐射传递能量，也能在真空中进行。温度相等的物体可以相互交换辐射，但净辐射传热量为零。(openstax.org)\n\n对于通过均匀平板的稳态热传导，有\n\n\\[\\dot Q=kA\\frac{T_{\\mathrm h}-T_{\\mathrm c}}{L},\\]\n\n其中，\\(A\\) 为面积，\\(L\\) 为厚度，\\(k\\) 为热导率。温度差和面积越大，传热速率越高；厚度越大，传热速率越低。与传递的能量 \\(Q\\) 不同，传热速率 \\(\\dot Q\\) 的单位是瓦特。(openstax.org)\n\n更一般地，傅里叶定律将传导热通量与温度梯度的负值联系起来。将这一关系与局部能量守恒相结合，可以得到热方程，用于描述在给定材料假设和边界条件下，导热介质中的温度如何随时间演变。(ocw.mit.edu)"
    },
    {
      "heading": "热容与测量",
      "text": "对于不发生相变的加热或冷却过程，常用的近似公式为\n\n\\[Q=mc\\Delta T,\\]\n\n其中，\\(m\\) 为质量，\\(c\\) 为比热容。物体相应的热容为 \\(C=mc\\)。这一表达式假定 \\(c\\) 在所涉及的温度区间内近似不变，并且相关加热条件已明确规定。由于膨胀可能需要做功，气体在定容和定压过程中的热容有明显差异。(openstax.org)\n\n量热法通过可测量的变化来确定热量交换，这些变化通常是温度变化或相变。在理想隔热的组合系统中，较热部分释放的热量与较冷部分吸收的热量相等。实际测量还必须考虑量热器自身的热容，以及与环境交换的能量。(openstax.org)\n\n在相变过程中，能量传递不一定引起温度变化。对于在固定压力、平衡条件下熔化或沸腾的纯物质，有\n\n\\[Q=mL,\\]\n\n其中，\\(L\\) 是该相变的比潜热。熔化或汽化时吸收的能量，会在逆向相变中释放。当两相共存时，温度保持在相变温度，变化的是各相的量。(openstax.org)"
    },
    {
      "heading": "熵与热力机械",
      "text": "热力学第二定律对热传递及其向功的转化施加了限制。对于可逆的热传递，有\n\n\\[dS=\\frac{\\delta Q_{\\mathrm{rev}}}{T},\\]\n\n其中，\\(S\\) 为熵，\\(T\\) 为绝对温度。跨越有限温度差的热传递是不可逆的，并会在系统与环境组成的整体中产生熵。当绝热系统内部发生不可逆过程时，即使没有热量交换，熵也可以发生变化。(ocw.mit.edu)\n\n循环工作的热机从高温热源吸收热量，对外做功，并将部分热量排向较低温的热源。在温度为 \\(T_{\\mathrm h}\\) 和 \\(T_{\\mathrm c}\\) 的两个热源之间工作的可逆热机，其效率达到最大值：\n\n\\[\\eta_{\\max}=1-\\frac{T_{\\mathrm c}}{T_{\\mathrm h}}.\\]\n\n卡诺循环实现了这一理想极限，其中温度以开尔文表示。(openstax.org)\n\n制冷机和热泵通过消耗功，将热量从较冷区域输送到较热区域。它们的性能系数是有效传热量与输入功之比，可以大于一，因为装置是在搬运能量，而非仅将输入的功转化为热量。(openstax.org)"
    }
  ],
  "links": [
    "temperature",
    "energy",
    "thermodynamics",
    "internal-energy",
    "work-physics",
    "joule",
    "zeroth-law-of-thermodynamics",
    "first-law-of-thermodynamics",
    "state-function",
    "adiabatic-process",
    "thermal-conduction",
    "convection",
    "thermal-radiation",
    "electromagnetic-radiation",
    "thermal-conductivity",
    "heat-equation",
    "heat-capacity",
    "calorimetry",
    "phase-transition",
    "latent-heat",
    "second-law-of-thermodynamics",
    "entropy",
    "heat-engine",
    "carnot-cycle",
    "kelvin",
    "heat-pump"
  ],
  "sources": [
    {
      "title": "openstax.org/books/university-physics-volume-2/pages/3-introduction",
      "url": "https://openstax.org/books/university-physics-volume-2/pages/3-introduction"
    },
    {
      "title": "openstax.org/books/university-physics-volume-2/pages/1-4-heat-transfer-specific…",
      "url": "https://openstax.org/books/university-physics-volume-2/pages/1-4-heat-transfer-specific-heat-and-calorimetry"
    },
    {
      "title": "openstax.org/books/university-physics-volume-2/pages/1-1-temperature-and-therma…",
      "url": "https://openstax.org/books/university-physics-volume-2/pages/1-1-temperature-and-thermal-equilibrium"
    },
    {
      "title": "openstax.org/books/university-physics-volume-2/pages/3-3-first-law-of-thermodyn…",
      "url": "https://openstax.org/books/university-physics-volume-2/pages/3-3-first-law-of-thermodynamics"
    },
    {
      "title": "ocw.mit.edu/ans7870/16/16.unified/thermoF03/chapter_3.htm",
      "url": "https://www.ocw.mit.edu/ans7870/16/16.unified/thermoF03/chapter_3.htm"
    },
    {
      "title": "openstax.org/books/university-physics-volume-2/pages/1-6-mechanisms-of-heat-tra…",
      "url": "https://openstax.org/books/university-physics-volume-2/pages/1-6-mechanisms-of-heat-transfer"
    },
    {
      "title": "ocw.mit.edu/courses/es-1803-differential-equations-spring-2024/mites_1803_s24_h…",
      "url": "https://ocw.mit.edu/courses/es-1803-differential-equations-spring-2024/mites_1803_s24_heat_equation.pdf"
    },
    {
      "title": "openstax.org/books/university-physics-volume-2/pages/1-5-phase-changes",
      "url": "https://openstax.org/books/university-physics-volume-2/pages/1-5-phase-changes"
    },
    {
      "title": "ocw.mit.edu/ans7870/16/16.unified/thermoF03/chapter_7.htm",
      "url": "https://ocw.mit.edu/ans7870/16/16.unified/thermoF03/chapter_7.htm"
    },
    {
      "title": "openstax.org/books/university-physics-volume-2/pages/4-5-the-carnot-cycle",
      "url": "https://openstax.org/books/university-physics-volume-2/pages/4-5-the-carnot-cycle"
    },
    {
      "title": "openstax.org/books/university-physics-volume-2/pages/4-3-refrigerators-and-heat…",
      "url": "https://openstax.org/books/university-physics-volume-2/pages/4-3-refrigerators-and-heat-pumps"
    }
  ],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}