{
  "id": "water",
  "title": "Water",
  "lang": "en",
  "source_lang": "en",
  "summary": "Water (H₂O) is a polar molecule whose hydrogen-bonded network gives it unusual physical properties, makes it a universal solvent, and underpins life and Earth's climate.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "H₂O"
  ],
  "generated_at": "2026-10-08",
  "model": "pro/claude-haiku-5-5",
  "url": "https://aiwiki.page/en/water/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/water/",
      "json": "https://aiwiki.page/zh/water.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Water is a chemical compound with the formula H₂O, a molecule made of two hydrogen atoms bonded to one oxygen atom. It is the most abundant substance at Earth's surface and the medium in which all known life developed. Its importance comes from a combination of simple structure and unusual behaviour: a small molecule that stays liquid over the temperature range where life exists, a high heat capacity, and an ability to dissolve a wide range of polar and ionic substances. Most of these properties trace back to the polarity of the O–H bonds and to the hydrogen bonds that link neighbouring molecules.\n\nThis entry covers water as a chemical substance and as a planetary and biological system. It begins with molecular structure and hydrogen bonding, then describes the physical anomalies, phases and ice, and the behaviour of water as a solvent. It then turns to isotopes, the distribution of water on Earth, the water cycle, and water's roles in living organisms and in the wider universe. The later sections treat the history of its discovery, the way it is measured and standardised, drinking water and sanitation, human use, scarcity and pollution, the effects of climate change, its place in religion and culture, and questions that remain open."
    },
    {
      "heading": "Molecular structure and polarity",
      "text": "Bent geometry and lone pairs\n\nA water molecule has one oxygen atom bonded to two hydrogen atoms, and its shape is bent rather than linear. The H–O–H angle is about 104.5°. Oxygen contributes six valence electrons. Two of these form bonds with hydrogen, and the other four sit in two lone pairs. Around the oxygen there are four electron domains, which in an ideal tetrahedral arrangement would give angles of 109.5°. The two lone pairs occupy more space and repel the bonding pairs more strongly than the bonding pairs repel each other, so they press the O–H bonds together and narrow the angle by about 5°. This is the standard account given by VSEPR theory. A valence-bond description with \\(sp^3\\) hybridisation reproduces the near-tetrahedral framework but overestimates the angle, and the discrepancy is often addressed through Bent's rule, which assigns more s-character to the lone-pair orbitals and so compresses the bonding orbitals' angle.\n\nElectronegativity and bond polarity\n\nOxygen is among the most electronegative elements, with a Pauling value of about 3.44, compared with about 2.20 for hydrogen. In each O–H covalent bond the shared electrons are drawn toward oxygen, which leaves the oxygen with a partial negative charge (δ−) and each hydrogen with a partial positive charge (δ+). The bonds are therefore strongly polar, with character intermediate between a pure covalent sharing and a full ionic transfer. Because a hydrogen atom has no inner electron shell, its δ+ charge sits on a small, exposed nucleus. This makes the hydrogen atoms unusually effective at approaching the lone pairs of neighbouring molecules, a feature that is developed in the discussion of hydrogen bonding.\n\nPermanent dipole moment\n\nBecause the two bond dipoles point partly toward oxygen and do not cancel in a bent geometry, the molecule as a whole carries a net dipole. The vector points from the midpoint of the two hydrogens toward the oxygen. The measured gas-phase value is about 1.85 D, or roughly \\(6.2 \\times 10^{-30}\\ \\mathrm{C\\,m}\\). This is large for a molecule of such small size, with a diameter of about 2.75 Å. The dipole determines how water behaves toward charged and polar species. The negative oxygen end is attracted to cations, and the positive hydrogen end is attracted to anions, through ion–dipole forces. Water molecules also align with one another and with external fields. This orienting behaviour underlies both the solvent power of water toward salts and sugars and its high dielectric constant. Non-polar substances lack a dipole to interact with and are therefore poorly solvated, which is developed further under solvents.\n\nComparison with hydrogen sulfide and other hydrides\n\nThe other hydrides of Group 16, namely hydrogen sulfide, hydrogen selenide and hydrogen telluride, are also bent molecules, but their properties differ sharply from water's. The H–S–H angle in H₂S is 92.1°, and its dipole moment is about 0.97 D, roughly half that of water. Sulfur is less electronegative than oxygen, so its S–H bonds are less polar, and its larger atomic radius spreads the charge over a bigger volume. The effect on phase behaviour is large. Water boils at 100.0 °C, whereas H₂S boils at about −60 °C, H₂Se at about −41 °C and H₂Te at about −4 °C. Water melts at 0 °C, whereas H₂S melts near −86 °C. Across the heavier hydrides, boiling points rise steadily with molecular mass, as dispersion forces grow with size. Extrapolating that trend to water would place its boiling point far below 0 °C. The actual value is much higher because water molecules are linked by hydrogen bonds, which H₂S does not form to any significant degree. The contrast shows that water's anomalies reflect its strong polarity, and that they are not explained by its shape alone."
    },
    {
      "heading": "Hydrogen bonding and the liquid network",
      "text": "Each water molecule can take part in as many as four hydrogen bonds. Its two hydrogen atoms can each point toward a lone pair on a neighbouring oxygen, so the molecule acts as a donor twice. Its two oxygen lone pairs can each accept a hydrogen atom from another molecule, so it acts as an acceptor twice. In the ideal case the four contacts are arranged around the molecule in a tetrahedron, as they are in ordinary ice. Liquid water rarely reaches this maximum. Experimental estimates put the average number of hydrogen bonds per molecule at about 3.5, and simulations using different electronic-structure approximations give values that vary with the chosen functional.\n\nThe bonds are directional. An O···H–O contact is strongest when the three atoms lie close to a straight line and the two oxygen atoms are less than about 0.3 nm apart. This preference follows from the bent, electron-rich geometry of the molecule. Around the central oxygen, two bonding pairs and two lone pairs repel one another and push toward a roughly tetrahedral arrangement. Because the lone pairs occupy specific directions, they determine where a neighbouring hydrogen can sit most favourably. The ideal tetrahedral angle is about 109.5°, close to the H–O–H angle of water itself, which is about 104.5° in the gas phase. The tetrahedral pattern is therefore a geometric consequence of electron-pair repulsion rather than an arbitrary choice. It becomes fully realised only in crystalline ice, where the network is extensive and long-range.\n\nIn the liquid, bonds are continually stretched, bent and broken by thermal motion. Simulations commonly give an average hydrogen-bond lifetime of about one picosecond. A careful ab initio study using a high-level correlated method reported about 0.78 ps, noticeably shorter than the roughly 3 ps obtained from many non-polarisable force fields and density-functional calculations. Most broken bonds reform quickly with the same acceptor molecule, typically on a picosecond timescale, and such reformation is considerably faster than the exchange of partners between molecules. The energy needed to break a bond is only a few kilojoules per mole, of the same order as the energy of thermal collisions, which explains why the network is both extensive and fluid. The water molecules thus exchange partners rapidly, even though each one is never far from its neighbours.\n\nModels of the liquid's local structure remain under debate. The traditional picture is of a random tetrahedrally coordinated network. In this view, tetrahedral clustering is widespread in ice but only local in the liquid, and it weakens as temperature rises, although hydrogen-bonded chains still link molecules separated by large distances. An X-ray absorption study published in 2004 argued that each molecule has on average only two hydrogen-bonding partners in the first coordination shell, which would favour chains and rings rather than a tetrahedral network. Later analysis challenged this reading, arguing that the same spectral features can arise from minimally distorted tetrahedral configurations. A more general framework is the two-state model, which traces back to Röntgen and holds that liquid water contains two interconvertible local structures: a locally favoured tetrahedral structure and a disordered normal-liquid structure. Thermal fluctuations shift the balance between them, and this framework is used to account for several thermodynamic anomalies. In 2026, a study applying unsupervised deep learning to molecular dynamics simulations reported two distinct clusters, a denser, more disordered one and a less dense, more ordered one, across a range of conditions that included temperatures close to room temperature. The authors describe this as molecular-level support for the two-state picture, but the physical interpretation of the clusters has yet to be confirmed experimentally."
    },
    {
      "heading": "Anomalous physical properties",
      "text": "Melting and boiling points\n\nAt standard atmospheric pressure, water melts at 0 °C and boils at 100 °C. Both values are far higher than those of other molecules of similar mass. Methane (CH₄, about 16 u) boils at about −162 °C, and ammonia (NH₃, 17 u) at about −33 °C. Among the hydrides of the same group, hydrogen sulfide (H₂S, 34 u) boils at about −60 °C, hydrogen selenide at about −41 °C and hydrogen telluride at about −2 °C. Extrapolating the trend down the group gives a boiling point for water of roughly −80 °C, so the observed value lies about 180 K above what the heavier analogues would predict. The gap is attributed to the hydrogen bonds that link water molecules into a three-dimensional network.\n\nThe energy budget shows how much of that network must be disrupted. The enthalpy of fusion of ice is only about 6.0 kJ/mol, so melting breaks a small fraction of the bonds, and the remaining network persists in the liquid. Vaporisation, by contrast, requires about 40.7 kJ/mol at 100 °C, because molecules must be fully separated from their neighbours. Much of the energy that enters the liquid therefore goes into weakening and breaking intermolecular links rather than raising its temperature.\n\nDensity maximum and the anomaly of ice\n\nLiquid water reaches its maximum density, about 1000 kg/m³, at approximately 3.98 °C under ambient pressure. Below this temperature water expands as it cools. Ice at 0 °C has a density of about 917 kg/m³, roughly 9 percent less than liquid water, so ice floats. Most substances become denser when they solidify, and the reverse behaviour has direct ecological consequences. Lakes freeze from the surface downward, and the ice layer insulates the water beneath, which typically remains near 4 °C through winter and allows aquatic life to persist. Expansion on freezing also fractures rock and burst pipes.\n\nThe anomaly follows from the geometry of the hydrogen-bond network. In ordinary hexagonal ice, each molecule is bonded to four neighbours in an open lattice that contains comparatively empty space. When the lattice melts, part of this open structure collapses and molecules pack more closely, which raises the density. Above 4 °C, ordinary thermal expansion dominates and the density falls. The competition between these two effects produces the maximum. Models of the liquid's local structure, discussed elsewhere, attempt to explain why this collapse proceeds as it does.\n\nHeat capacity, latent heat and climate\n\nThe specific heat capacity of liquid water is about \\(4.18\\ \\text{J·g}^{-1}\\text{K}^{-1}\\) near room temperature, which places it among the highest values of common liquids and solids. Because the oceans contain a very large mass of water, they store considerable heat and release it slowly, damping seasonal temperature swings on nearby land. This thermal inertia is one reason coastal climates are milder than inland ones at similar latitudes.\n\nThe latent heat of vaporisation is similarly large, about 2260 kJ/kg at 100 °C. Each kilogram of water that evaporates from the ocean absorbs this quantity of energy from its surroundings and releases it when the vapour condenses, which makes evaporation a major route for transporting heat through the atmosphere. Evaporative cooling operates at the scale of individual organisms as well. Evaporating sweat removes heat from the skin, and the same mechanism lets plants and animals regulate their temperature in hot conditions.\n\nSurface tension\n\nWater has a surface tension of about 72.8 mN/m at 20 °C, the highest value of any common liquid apart from mercury. Molecules at the surface have fewer neighbours than those in the bulk and are pulled inward by hydrogen bonds, which minimises the surface area of a liquid body. This cohesion gives water its tendency to form spherical droplets and allows small insects such as water striders to rest on its surface. In narrow channels, the combination of surface tension and adhesion produces capillary action. In plants, cohesion of the water column in the xylem supports the upward transport of sap. Surface tension decreases as temperature rises.\n\nDielectric constant and critical temperature\n\nWater has a relative permittivity (dielectric constant) of roughly 78–80 at 20–25 °C, which is exceptionally high for a liquid of its size. In Coulomb's law, the force between two charges in a medium is reduced by this factor,\n\n\\[F = \\frac{1}{4\\pi\\varepsilon_0\\varepsilon_r}\\,\\frac{q_1 q_2}{r^2},\\]\n\nso the electrostatic attraction between oppositely charged ions is weakened by a factor of about 80 relative to vacuum. This screening, combined with the strong orientation of water dipoles around charges, is central to water's role as a solvent for ionic compounds.\n\nWater also has a high critical temperature, about 647 K (373.9 °C), and a critical pressure of about 22.06 MPa. Above the critical point, the distinction between liquid and gas disappears, and water becomes a supercritical fluid. For comparison, the critical temperatures of nitrogen, oxygen, carbon dioxide and ammonia are about 126 K, 155 K, 304 K and 405 K, respectively. The strong intermolecular attraction that raises water's melting and boiling points also keeps its critical temperature far above that of other small molecules."
    },
    {
      "heading": "Phases, ice and the phase diagram",
      "text": "The phase diagram and the melting curve\n\nThe pressure–temperature phase diagram of water differs from that of most substances mainly in the slope of its solid–liquid boundary. For most materials, melting is accompanied by an increase in volume, which gives the melting curve a positive slope. For most substances ΔVfus is positive so that the slope is positive. However for water and other exceptions, ΔVfus is negative so that the slope is negative. Water therefore melts into a denser liquid, and raising the pressure lowers its melting point. This is a small effect, but it is real: the slope of this line is slightly negative for water, so water can melt at temperatures near its freezing point when subjected to pressure.\n\nThe three phase-equilibrium lines meet at the triple point, where solid, liquid and vapour coexist. At this unique temperature and pressure, arbitrary amounts of all three phases can coexist in equilibrium. This is the property that makes the triple point of water so suitable as a readily reproducible temperature standard. The sublimation curve runs from the triple point toward lower pressures, separating solid and vapour. The triple point lies at 273.16 K and about 611.7 Pa, a value later used to define the kelvin.\n\nThe liquid–vapour line ends at the critical point. The volume change between the liquid and gas phases is zero at this point. For water this lies at about 647.1 K (373.9 °C) and 22.06 MPa. Above it, the substance is a supercritical fluid: there is no sharp boundary between liquid and gas, and density and other properties change continuously as conditions vary. Supercritical water is used in industrial processes such as oxidation of organic waste and in some power-cycle designs.\n\nCrystalline ice\n\nOrdinary ice is hexagonal ice, ice Ih. The stable ambient pressure form is generally called ice Ih because it has a hexagonal structure. A cubic form, ice Ic, differs only in the stacking of its layers, and cubic ice (Ic) is metastable with respect to hexagonal ice (Ih). Stacking-disordered intermediates also exist. Ice Ih is the only form that occurs naturally at Earth's surface, because even thick glacier ice does not generate the pressures needed to convert it into a high-pressure phase.\n\nThe number of known phases is large. There are currently at least twenty-two known crystalline phases of ice. They are named with Roman numerals in order of discovery, with Ih as the exception. In most high-pressure phases, the water forms molecules in which an oxygen atom is strongly bound to two hydrogen atoms, but the hydrogen-bond network is packed more tightly. With increasing pressure, a series of phases exists with increasing packing efficiency of the crystal structure. Ice VII forms at room temperature near 2 GPa. At still higher pressures, ice X has a body-centred cubic oxygen sublattice and is considered an ionic solid that appears above roughly 60–80 GPa. Only a handful of these phases can be in equilibrium with liquid water at ordinary conditions. Only hexagonal ice-one (Ih), ice-three (III), ice-five (V), ice-six (VI), ice-seven (VII) and, perhaps, ice-ten (X) can be in equilibrium with liquid water.\n\nThe pressure dependence of the melting curve has a practical consequence. A pressure-melted ice cube held at 255 K refreezes when the external pressure exceeds about 300 MPa, but it does not return to ice Ih; it will not freeze to common hexagonal ice (ice I h), but to a different polymorph, namely ice III.\n\nSupercooling and nucleation\n\nLiquid water can remain unfrozen below 0 °C. Freezing requires an initial cluster of molecules arranged in the ice pattern, and this barrier can be overcome with either very cold temperatures (colder than –40°C), high supersaturation in the air, or by the presence of ice nuclei. In pure water without foreign surfaces, the freezing process is called homogeneous nucleation. The homogeneous nucleation temperature T hom of liquid water is generally accepted to be approximately -39 C. Experiments on small droplets, with radii below 10 μm, have reached about −40 °C before freezing. At –40°C, the cluster needs only about 250 molecules.\n\nImpurities shift this limit in opposite directions. The addition of solutes to water causes a depression of T hom, but in contrast the addition of ice nucleating agents (INAs) raises T hom. Heterogeneous nucleation, which uses pre-existing surfaces, therefore operates at higher temperatures. Some organisms exploit supercooling as well: some plant cells adapt to subfreezing temperatures by deep supercooling, with temperatures as low as –60 °C reported. Homogeneous freezing matters for atmospheric physics, for example in the formation of high-altitude cirrus clouds at temperatures below about 235 K.\n\nLiquid–vapour coexistence\n\nAlong the liquid–vapour curve, evaporation and condensation occur at equal rates at a given temperature and pressure, and the vapour pressure rises steeply with temperature until it reaches the critical point. The triple point sets the lower limit of this curve, and the critical point sets its upper limit. Between these two points, the boiling temperature depends on external pressure, which is why water boils at a lower temperature at high altitude. These features underpin the energy-intensive phase changes discussed in the sections on physical properties and climate."
    },
    {
      "heading": "Water as a solvent",
      "text": "Ionic compounds dissolve in water mainly through ion–dipole interactions. The oxygen end of each H₂O molecule carries a partial negative charge and the hydrogen ends carry partial positive charges, so molecules orient their oxygen atoms toward cations and their hydrogen atoms toward anions. The energy released by these interactions can exceed the lattice energy holding a crystal together, which is why sodium chloride dissolves readily. Water also reduces the electrostatic attraction between separated ions. Its dielectric constant is about 80 at room temperature, compared with roughly 2 for many hydrocarbons, and because Coulomb's law scales the force inversely with this constant, oppositely charged ions are held far less tightly in water.\n\nEach dissolved ion becomes surrounded by a hydration shell of oriented water molecules. Small, highly charged cations such as Li⁺ and Mg²⁺ bind a first shell of molecules tightly, while larger or less charged ions interact more weakly, and the exchange rate between shell and bulk water varies strongly with the ion. Anions are solvated mainly through hydrogen bonds from water's hydrogen atoms to their surfaces. The same molecular polarity that drives these interactions also explains why water is a strong solvent for many salts, acids and bases that are insoluble in nonpolar liquids.\n\nPolar molecules without charge dissolve through hydrogen bonding. Glucose and sucrose contain many –OH groups, each able to both donate and accept hydrogen bonds, and these groups substitute for water–water bonds in the liquid network. Sucrose dissolves to roughly 2 kg per litre at 20 °C, and small alcohols such as methanol and ethanol mix with water in all proportions. Solubility falls as the nonpolar hydrocarbon part of an alcohol lengthens: 1-butanol is only moderately soluble, and longer-chain alcohols are nearly immiscible, because the hydrophobic segment cannot be accommodated without disrupting the network.\n\nNonpolar solutes behave differently. Because they cannot form hydrogen bonds, water molecules surrounding them must rearrange into more ordered, cage-like configurations. This ordering reduces the entropy of the water, and the system lowers its free energy when nonpolar surfaces come together and release the ordered water. This is the hydrophobic effect, which is not a true attraction between nonpolar groups but a consequence of the water network. At room temperature the process is largely entropy-driven, as expressed by \\(\\Delta G = \\Delta H - T\\Delta S\\). In proteins, nonpolar side chains such as leucine, valine and phenylalanine tend to be buried in the folded interior while polar and charged residues remain at the surface, a principle that Walter Kauzmann emphasised in 1959. Phospholipids, which have a hydrophilic head and hydrophobic tails, similarly assemble spontaneously into bilayers that form the basis of cell membranes, separating the aqueous interior of the cell from its surroundings.\n\nWater is a poor solvent for most nonpolar gases and hydrocarbons. Dissolved oxygen in water saturated with air at 25 °C amounts to only about 8 mg per litre, and the amount dissolved follows Henry's law, being proportional to the gas's partial pressure and falling as temperature rises. Hydrocarbons such as benzene dissolve only to a few grams per litre, and larger oils separate into their own phase or form emulsions rather than mixing. Methane and other gases can be trapped in cage structures called clathrate hydrates under cold, high-pressure conditions. These solubility limits shape aquatic chemistry: fish and other aerobic organisms depend on the modest oxygen supply that enters through the surface and is carried by currents, and warmer water holds less oxygen, which contributes to oxygen depletion in stratified lakes and seas. Hydrophobic pollutants such as polychlorinated biphenyls do not remain dissolved but partition into sediments, suspended organic matter and the fatty tissues of organisms, which allows them to accumulate along food chains."
    },
    {
      "heading": "Autoionisation, pH and acid–base behaviour",
      "text": "Pure liquid water partly ionises itself. One water molecule donates a proton to another, producing a hydronium ion and a hydroxide ion:\n\n\\[2\\,\\mathrm{H_2O} \\rightleftharpoons \\mathrm{H_3O^+} + \\mathrm{OH^-}\\]\n\nThe equilibrium constant, the ion-product constant of water \\(K_w\\), is written \\(K_w = [\\mathrm{H_3O^+}][\\mathrm{OH^-}]\\), with concentrations in mol/L. Liquid water does not appear in the expression because it is a pure liquid. At 25 °C, \\(K_w\\) is about \\(1.0 \\times 10^{-14}\\). In pure water the two ions are therefore equal, each at about \\(1.0 \\times 10^{-7}\\) mol/L. The very small value shows that the equilibrium lies strongly toward the un-ionised molecules. \\(K_w\\) rises with temperature, so autoionisation is endothermic: more ions form as water warms, and the equilibrium shifts accordingly.\n\nThe pH is the negative logarithm (base 10) of the hydrogen-ion activity, which in dilute solutions is approximated by the hydronium concentration. Because the scale is logarithmic, each unit corresponds to a tenfold change in acidity. At 25 °C, solutions with pH below 7 are acidic and those above 7 are basic, and a solution with equal hydronium and hydroxide concentrations is neutral. The pH value of neutrality is not fixed at 7 at all temperatures. Since \\(K_w\\) changes, the pH at which \\([\\mathrm{H_3O^+}] = [\\mathrm{OH^-}]\\) also changes: pure water has a pH of about 7.47 at 0 °C and about 6.14 at 100 °C. A reading of 7 at 100 °C is therefore slightly alkaline, even though the water is still chemically neutral in the sense of equal ion concentrations. The conventional scale runs from 0 to 14, but very concentrated strong acids or bases can give values outside that range.\n\nWater is amphoteric in the Brønsted–Lowry sense. In hydrogen chloride solution it accepts a proton and acts as a base, forming hydronium. In ammonia solution it donates a proton and acts as an acid, forming ammonium and hydroxide. Water is also a reactant in hydrolysis, where the splitting of a bond by water changes the acid–base balance of the solution. Because water supplies both \\(\\mathrm{H^+}\\) and \\(\\mathrm{OH^-}\\) equilibria, the ph of any aqueous system depends on the chemical-equilibrium of every dissolved acid and base present, which is why acid-base-reaction chemistry is central to aqueous solutions.\n\nNatural waters resist sudden pH change mainly through the carbonate system. Atmospheric carbon dioxide dissolves and forms carbonic acid, which dissociates to bicarbonate, and bicarbonate in turn can dissociate to carbonate. The overall sequence is a set of reversible steps, \\(\\mathrm{CO_2} + \\mathrm{H_2O} \\rightleftharpoons \\mathrm{H_2CO_3} \\rightleftharpoons \\mathrm{H^+} + \\mathrm{HCO_3^-} \\rightleftharpoons 2\\,\\mathrm{H^+} + \\mathrm{CO_3^{2-}}\\). The bicarbonate ion is the key buffering species: it can consume added hydronium or hydroxide, and the equilibrium shifts to offset the change. While this buffering capacity lasts, pH stays almost constant. Once it is exhausted, a further small addition of acid produces a rapid drop in pH. The buffering capacity is measured as alkalinity, usually expressed in mg/L as CaCO₃, which ranges from roughly 10 mg/L to several hundred mg/L in natural waters. The carbonate system is generally the principal buffer in natural waters, and in the ocean it holds surface pH within a narrow band of about 8.1 to 8.3.\n\nBuffering matters for aquatic life because most organisms function only within a limited pH range, and abrupt shifts can damage gills, enzymes and cell membranes. Where bedrock contains little buffering material, the same processes operate with less protection. In parts of Atlantic Canada, granite and shale bedrock with little buffering capacity makes surface waters vulnerable to acidification even under modest acid deposition. The carbonate system also controls the availability of carbonate ions, on which corals, molluscs and other calcifying organisms depend to build their skeletons. Rising atmospheric CO₂ increases dissolved CO₂ in the ocean, which lowers the carbonate ion concentration and pushes the buffer toward lower pH. This process, known as ocean-acidification, is part of the wider carbon-cycle. In freshwater, excessively high pH can also be harmful, and some buffering effects can contribute to that toxicity."
    },
    {
      "heading": "Isotopes and heavy water",
      "text": "Hydrogen has three isotopes. Protium (¹H) has no neutron in its nucleus, deuterium (²H or D) has one, and tritium (³H or T) has two. Oxygen has three stable isotopes, ¹⁶O, ¹⁷O and ¹⁸O, and ¹⁶O makes up the great majority of oxygen atoms. Because each water molecule can combine any of these hydrogen and oxygen isotopes, the number of possible isotopologues is large. The most common deuterated species in natural water is HDO rather than D₂O, since semiheavy water (HDO) is more common than pure heavy water. Deuterium is scarce even so: in ocean water it amounts to roughly 1 in every 6,400 hydrogen atoms.\n\nHeavy water (D₂O) is the isotopologue in which both hydrogen atoms are deuterium. Its molar mass is about 20 g/mol, compared with about 18 g/mol for ordinary water. That mass difference shifts several physical constants. Its density at 25 °C is about 1.107 g/mL, and it is roughly 10.6% denser than regular water, so an ice cube made from heavy water will sink in ordinary water. Its melting point is about 3.8 °C, and its boiling point is about 101.4 °C. The higher melting point is generally attributed to the lower zero-point vibrational energy of O–D bonds, which slightly strengthens the hydrogen-bond network. Heavy water also is less dissociated at a given temperature than ordinary water. Its biological effects are substantial at high concentrations: it can be lethal to multicellular organisms at concentrations over 50%. Heavy water is not radioactive, because deuterium is a stable isotope of hydrogen. Its main industrial role is in nuclear technology, where it serves as a neutron moderator in certain reactor designs.\n\nTritium is the radioactive member of the family. Tritium decays to ³He with a half-life of 12.32 ± 0.02 years, emitting a low-energy beta particle. Tritium is produced naturally when high energy cosmic rays interact with oxygen and nitrogen nuclei in the upper atmosphere. Because of its short half-life, the natural inventory does not build up over geological time, which is why its natural abundance is negligible. Human activity now dominates the global inventory. Atmospheric thermonuclear testing between 1953 and 1963 was the largest single source, and reactors, reprocessing plants and some consumer products add to it. Tritium typically is naturally present in surface waters at about 0.4–1.2 Bq/L. Once taken into the body, tritiated water is uniformly distributed through all biological fluids within 1–2 hours, and its biological half-life is about 10 days. Because tritiated water behaves chemically like ordinary water, it is widely used as a hydrological tracer.\n\nIsotopic fractionation arises because heavier isotopes move between phases at slightly different rates. The relationship between δ¹⁸O and δ²H in meteoric water reflects mass-dependent fractionation between evaporation from seawater and condensation from vapour. During evaporation, lighter molecules escape more readily, so evaporation preferentially removes lighter ¹⁶O from water bodies, enriching the remaining water in ¹⁸O, while the vapour becomes depleted in ¹⁸O. Condensation reverses this preference, so condensation during cloud formation favors the heavier ¹⁸O. As a cloud loses water as rain, its remaining vapour grows progressively lighter. The size of the effect depends on temperature, so the degree of fractionation is temperature dependent, and it increases at colder temperatures.\n\nThese physical controls make isotope ratios useful as climate proxies. Isotope abundances are reported in delta notation relative to a reference standard, and the isotope ratios of ancient precipitation can be read from ice. Ice that formed in colder conditions carries a lower ratio of ¹⁸O to ¹⁶O, so lower δ¹⁸O values indicate a colder past climate and higher δ¹⁸O values indicate a warmer past climate. Ice-core records are compared with the isotope signal of ocean sediments, and a δ¹⁸O increase of 1.0‰ is equivalent to approximately 4 °C of cooling is a commonly cited approximation, though local conditions such as altitude and distance from the moisture source also affect the signal. Scientists take these measurements from glacier and ice-sheet cores as well as from deep-sea sediment cores, and the hydrogen and oxygen records are combined to reconstruct past climate conditions."
    },
    {
      "heading": "Distribution of water on Earth",
      "text": "Estimates put the planet's total water inventory at about 1,386 million cubic kilometres, roughly 1.4 billion km³ in all, and nearly all of it is saline. The oceans hold about 1,338 million km³ Oceans (saline) 1,338,000,000 cubic kilometers, which is around 96.5 percent of the total. Freshwater makes up only about 2.5 percent of the global total Only about 2.5% of Earth's total water is freshwater. This share is small, and the volume of seawater is in the same order as the total volume of all water on Earth, so the freshwater fraction is a tiny residue of the whole system.\n\nMost freshwater is not liquid and not at the surface. The USGS breakdown lists Ice caps and glaciers (fresh) 24,064,000 cubic kilometers and Groundwater (fresh and saline) 23,400,000 cubic kilometers, while Streams, lakes, swamps (fresh) 104,590 cubic kilometers. Ice and groundwater therefore dominate the freshwater inventory, and the remaining categories are small by comparison. The atmosphere holds only about 3,100 mi^3 (12,900 km^3) of water, mostly in the form of water vapor at any one time. Of the liquid freshwater at the surface, 87% is contained in lakes, 11% in swamps, and only 2% in rivers. Rivers, which carry most of the water that people see flowing, thus constitute a minor store, though they are constantly replenished.\n\nThe freshwater that humans can readily reach is a far smaller fraction still. Applying the 2 percent river share to the surface-water figure gives roughly 2,000 km³ held in rivers at any given time, a quantity that is tiny relative to the planet's total. Lakes and shallow aquifers are the other main sources of accessible supply. Deep groundwater and polar ice, although enormous in volume, are costly or impossible to tap. One estimate cited in a reference work holds that inland aquifers constitute more than 97% of the planet's unfrozen freshwater, which underlines that much of the unfrozen supply lies underground rather than in visible bodies of water. Groundwater is thus both the largest unfrozen reservoir and one of the least directly accessible.\n\nThe distribution is also highly uneven across regions. Glacier ice is concentrated in a few places, with approximately 91% in Antarctica and 8% in Greenland, so almost none is near most population centres. Among liquid waters, Lake Baikal in Siberia stands out: it is the deepest, and at 31,500 ha, the seventh largest lake in the world, containing over a fifth of the world's unfrozen surface fresh water (23,600 km³). Large river basins also differ markedly in their discharge, and the Amazon, for example, carries a substantial share of global river flow to the ocean. Because rainfall, glacier melt and aquifer recharge do not coincide with where people live and farm, many regions face shortages even where the total volume of water appears ample. The hydrosphere as a whole is therefore abundant in absolute terms, while its usable freshwater is scarce and unevenly placed, a pattern that shapes the water cycle and the human use of rivers, groundwater and glaciers."
    },
    {
      "heading": "The hydrological cycle",
      "text": "Water circulates among oceans, atmosphere, ice and land in the water-cycle, and solar energy supplies most of the power for that circulation. Sunlight warming the ocean and other surface waters sustains evaporation from liquid surfaces and the sublimation of ice, which together release large volumes of vapour into the air. Some 496,000 cubic km of water evaporates from the land and ocean surface annually, and the energy needed for that phase change equals half of the total solar radiation received at Earth's surface.\n\nOver the oceans the balance is negative for the water surface: evaporation exceeds precipitation, and the net difference represents transport of water vapour over land, where it falls again. Of the rain and snow reaching continents, 73,000 cubic km per year, returns to the atmosphere by evaporation. The remainder drains back to the sea, and about one-third of the precipitation falling on land runs off to the oceans primarily in rivers.\n\nPlants move water from roots to leaves through xylem and release it as vapour through leaf pores, a process called transpiration. Transpiration combined with evaporation from soil, wet canopies and open water forms evapotranspiration. Its share is contested. One 2017 study placed transpiration at about 57% of global terrestrial evapotranspiration, but previously reported global mean values from multiple independent sources, including satellite-based estimations, reanalysis, land surface models, and isotopic measurements, varies substantially from 24% to 90%. A compilation of ecosystem studies gave a different picture: transpiration accounts for 61% (±15% s.d.) of ET and returns approximately 39 ± 10% of incident precipitation (P) to the atmosphere.\n\nWater vapour that cools in the air condenses into clouds as liquid or frozen droplets and is eventually followed by precipitation (rain or snow), which returns water to the Earth's surface. Once on land, the water is partitioned among several routes. Part flows over the surface as surface-runoff into streams and lakes; part soaks into the soil, where it can percolate into deeper groundwater levels but will ultimately join with surface water and find its way back to the sea. A smaller share is held temporarily: a small amount of precipitation is temporarily stored in the waters of rivers and lakes. Snowpack and glacier ice add further storage, which delays runoff and feeds seasonal flows in many regions.\n\nResidence time, defined as the amount of water in a reservoir divided by either the rate of addition of water to the reservoir or the rate of loss from it, varies by orders of magnitude among reservoirs. The atmosphere is the most rapidly turned-over store, with a global average residence time of 8.9 ± 0.4 days in one 2017 analysis. Soil moisture is also short-lived: moisture in the soil typically stays there for less than a year. Estimates for rivers disagree; one source gives two weeks, while another gives 2 to 6 months, so the figure depends on the river and on how it is measured.\n\nAt the slow end, the average residence time of water in reservoirs is about 3,000 to 3,230 years for the oceans and about 10,000 years for deep groundwater. Groundwater stays in aquifers for an average of 300 years, although some very deep groundwater is hundreds of thousands or even millions of years old. These long residence times mean that the deep reservoirs hold most of Earth's water but contribute little to the short-term cycle, which is driven by the fast exchange between ocean, atmosphere and surface waters."
    },
    {
      "heading": "Roles in living organisms",
      "text": "Water accounts for the largest share of the molecules in a typical cell. Because enzymatic catalysis, metabolic sequences and cellular respiration all unfold in an aqueous setting, the cell's interior is in effect a water-based reaction medium. Water also acts as a solvent that carries nutrients, metabolic wastes, hormones and digestive secretions between tissues. Its ability to dissolve ions and polar molecules, a consequence of its hydrogen-bond network, is what allows these substances to move freely.\n\nWater is also a participant in chemistry, not only a bystander. In hydrolysis, a water molecule is added across a bond so that polymers such as proteins, lipids and carbohydrates are cut into smaller units, which is the basis of digestion. The reverse process, condensation, joins monomers and releases water, so water appears on the product side of many biosynthetic reactions. Aerobic cellular-respiration likewise yields water as a product. In this way metabolism continually draws on and regenerates the water pool of the cell, while the energy released when adenosine-triphosphate is hydrolysed powers muscle contraction, active transport and biosynthesis.\n\nWater movement across the cell-membrane is governed by osmosis: water passes through the membrane, often via aquaporin channels, from regions of higher water potential toward regions where dissolved solutes are more concentrated. Animal cells placed in pure water swell and can burst, whereas cells in a concentrated solution lose water and shrink. Plant cells are protected by a rigid wall. When water fills the central vacuole, the protoplast presses against that wall and generates turgor pressure, which keeps leaves and stems firm. When water is lost, the same plant tissues become flaccid and wilt. Organisms regulate these fluxes as part of homeostasis, keeping cell volume and internal osmotic pressure within narrow limits.\n\nWithin plants, water is also the main vehicle for long-distance transport. Evaporation from the leaf surfaces, mainly through stomata, creates a tension that draws a continuous column of water upward through the xylem from roots to shoots. This transpiration stream carries dissolved minerals with it, linking the water relations of individual cells to whole-plant nutrition. Transpiration from leaves is one of the processes that make up evapotranspiration.\n\nWater is a substrate in photosynthesis as well. In oxygenic photosynthesis, light energy captured by photosystem II drives the splitting of water in the thylakoid membranes of the chloroplast. The reaction releases molecular oxygen, protons and electrons. The electrons replace those lost by chlorophyll, and the protons build up a gradient that drives ATP synthesis. The oxygen released in this way is the source of the oxygen in Earth's atmosphere.\n\nWater also underpins thermoregulation in animals. Its high latent-heat of vaporisation means that evaporating water removes a large amount of heat from the skin. Human sweat is roughly 99 percent water, and at rest a notable fraction of heat loss occurs as insensible perspiration. During heavy exercise or in hot, humid conditions, the evaporation of liquid sweat becomes the dominant route of heat loss. Humid, still air or heavy clothing reduces this cooling by slowing evaporation, which is why the same temperature can feel very different depending on airflow and humidity."
    },
    {
      "heading": "Water in the universe",
      "text": "Water ranks among the most widespread molecules in space. Most of it seems to form as ice coating tiny dust grains in cold, sparse interstellar clouds, and that ice is largely carried into the collapsing clouds that become new stars and planets, where it is locked into pebble-sized grains that later build planetary bodies. The ice forms on dust particles in cold, tenuous clouds, and when a cloud collapses, this water is largely preserved and anchored into pebble-sized particles. These pebbles become the building blocks of new planets in the rotating disc around a young star.\n\nDetecting water in space is difficult. Observing water molecules in interstellar space is nearly impossible from the ground because the terrestrial atmosphere absorbs the signal. The first interstellar detection, made in 1969 through a 22 GHz maser line in Orion, was a ground-based exception to this rule, since water's main rotational transitions lie at far-infrared wavelengths, which require space-based observatories to probe fully. The first detection of interstellar water was made from the ground through the 22 GHz water maser line in Orion. Space-based observatories are needed to probe the full spectrum of water vapor. As a light hydride, water vapor has its principal rotational transitions at far-infrared rather than millimeter wavelengths. The Herschel Space Observatory's HIFI instrument recorded water vapour spectra across the stages from cold clouds to forming stars and disks, and the ALMA array in Chile can now observe water vapour from the ground at millimetre wavelengths. The ALMA telescopes in Chile can observe water vapour in space from the ground.\n\nWater is also present in planet-forming disks around young stars. Observations with the Keck Interferometer resolved gas, including water vapour, within one astronomical unit of the young star MWC 480, and the authors proposed that this vapour comes from icy bodies that sublimate as they migrate inward, potentially supplying water to rocky planets. The observed water vapour is probably produced by the sublimation of migrating icy bodies, and provides a potential reservoir of water for terrestrial planets. ALMA observations of the HL Tau disk gave a lower bound of water vapour equivalent to at least 3.7 Earth oceans within the inner 17 astronomical units of that system. Their analysis implies a stringent lower limit of 3.7 Earth oceans of water vapour available within the inner 17 astronomical units of the system.\n\nBeyond the inner solar system, water ice is a major constituent of comets, icy moons and Kuiper belt objects, many of which are cold enough that water exists only in solid form at their surfaces. Some of these bodies are believed to hide liquid water beneath their crusts. Three bodies in the solar system are regarded as hosting subsurface oceans that have been detected or inferred by two independent spacecraft techniques: Europa, Enceladus and Titan. Elsewhere in the solar system, three objects—Jupiter's moon Europa, and Saturn's moons Enceladus and Titan—have subsurface oceans whose existence has been detected or inferred by two independent spacecraft techniques. The evidence for Europa rests largely on magnetic measurements: the Galileo magnetometer experiment provided the strongest evidence for a salty subsurface ocean beneath the ice shell, likely in contact with the rocky mantle. Europa's ocean is thought to be the shallowest of the three, with its top less than 10 km and possibly less than 1 km in places below the surface, although there has been no hard evidence that plumes of water vapor shoot from Europa's ice.\n\nEnceladus provides the most direct evidence. Its ocean lies 5–40 km below its surface, but fractures beneath the south pole allow ice and gas from the ocean to escape to space, where mass spectrometers aboard the Cassini orbiter sampled it. The plumes are mostly water vapor and ice, and trace amounts of organics, such as methane, ethane, butane, and pentane, are present in the plume vapor. Titan's ocean is thought to be the deepest of the three, perhaps 50–100 km down, with no surface plume activity found so far.\n\nMars shows a more complicated record of water. Most of its present water is frozen. Orbital neutron measurements indicated that water ice makes up 10–50% by weight of the regolith in some areas, and it is unevenly distributed, with higher concentrations near the poles and lower concentrations near the equator. Newer analyses indicate that near-surface ice is likely present poleward of about 45° in both hemispheres. Modelling of mid-latitude ground ice suggests that some of it was deposited when the planet's axial tilt was larger, roughly 630,000 years ago, and then buried by a layer of dust. Radar has also been used to search for liquid below the surface: radar profiles collected between May 2012 and December 2015 contain evidence of liquid water trapped below the ice of the South Polar Layered Deposits. This interpretation remains contested, because critics have argued that the reflection could be explained by other materials. Evidence for past surface water is clearer, since surface rocks show clear evidence that there was liquid water on the planet in the distant past.\n\nThe origin of Earth's water is still debated. One view holds that most of the water was already present as ice in the solar nebula and was retained as the planet formed. Another holds that much of it was delivered later by impacts from comets or water-bearing asteroids. The two scenarios can be distinguished by comparing the isotopic composition of Earth's water with that of comets and meteorites, and the timing of ocean formation remains an open question."
    },
    {
      "heading": "Discovery and historical understanding",
      "text": "Western ideas about water begin in the Greek world. In Miletus in the sixth century BCE, Thales (c. 626/623 – c. 548/545 BC) believed that water was this principle, the single originating substance of all things. His theory was supported by the observation of moisture throughout the world. His successors rejected water in favour of other candidates. Water was one of many archai proposed by the Pre-socratics, most of whom tried to reduce all things to a single substance. However, Empedocles of Acragas selected four archai for his four roots: air, fire, water and earth. Aristotle then built this scheme into a theory of qualities, establishing a theoretical system based on the opposition and transformation of the qualities of cold and hot, dry and wet. In that system water was an element, not a compound, and this view remained standard in European natural philosophy for roughly two thousand years.\n\nThe chemical identity of water was settled in the 1780s, through work on the gases that had been called \"airs.\" In 1766 Henry Cavendish was the first to recognize hydrogen gas as a discrete substance, by identifying the gas from a metal-acid reaction as flammable air. In the summer of 1781 he took up an experiment that Joseph Priestley and John Warltire had reported: in the spring of 1781, Priestley and Warltire made experiments on the electrical detonation of inflammable air with common and dephlogisticated airs, noting a deposit of dew. That summer Cavendish repeated the experiments, determining that the dew was pure water. Cavendish found that all the inflammable air and about one-fifth of the ordinary air had ceased being gases in forming what he discovered was pure water. His interpretation was still shaped by the phlogiston theory, so he believed that this new gas (\"inflammable air\") was phlogiston. Publication was delayed, since the resulting water was contaminated with nitric acid, and his account reached print only in 1784.\n\nIt was Antoine Lavoisier who drew the decisive chemical conclusion. Working with Pierre-Simon Laplace, he burned hydrogen in oxygen and recovered water. In November, 1783, Lavoisier reported to the French Academy of Sciences on experiments that he and Pierre Simon de Laplace had performed, which demonstrated that water was not an element but instead was a compound of hydrogen and oxygen. The name he gave the gas reflects this result: hydrogen means \"maker of water\" in Greek. Lavoisier had already coined the name oxygen, naming it in 1778 and recognizing it as an element. The priority dispute that followed was bitter. When Watt learned of Cavendish's and Lavoisier's reports on water's nature, he accused Cavendish of plagiarizing his ideas and Lavoisier of plagiarizing Cavendish's experiments.\n\nLavoisier's figures were quantitative but imperfect. In his book, Elementary Treatise on Chemistry, 1789, he noted that when 85 parts of oxygen were combined with 15 parts hydrogen this resulted in 100 parts of water. The modern mass ratio is closer to 89 to 11. Within a generation, the atomic theory of John Dalton and the law of definite proportions advanced by Joseph Louis Proust gave a firmer basis to the idea. Water was understood to contain hydrogen and oxygen in a fixed mass ratio of about 1 to 8, whatever its source, which made it a compound of definite composition.\n\nIn the twentieth century the question shifted from composition to molecular structure and the forces between molecules. Linus Pauling used the idea of a hydrogen bond to explain the residual entropy of ice in the 1930s, and treated the bond systematically in his 1939 book on the chemical bond. Diffraction experiments then established the arrangement of atoms in water and ice. X-ray diffraction located the oxygen atoms well, but hydrogen atoms scatter X-rays weakly. Neutron diffraction studies, which were carried out from the 1950s onward, fixed the positions of the hydrogen atoms and confirmed the bent molecular geometry and the hydrogen-bonded network."
    },
    {
      "heading": "Measurement, definitions and standards",
      "text": "Water-based definitions of mass and volume\n\nThe metric system was once tied directly to water. In 1795 the French decree that set up the gram described it as the mass of a volume of pure water equal to the cube of one hundredth of a metre, taken at the temperature of melting ice. The kilogram was then fixed as a practical artefact a thousand times the gram. In 1799, French chemist Louis Lefèvre-Gineau and Giovanni Fabbroni shifted the reference temperature to about 4 °C, where water reaches its maximum density, because that point was more stable. Their measurements found that one cubic decimetre of water at that temperature was 99.9265 percent of the mass of the provisional kilogram. The platinum artefact made that year became the working standard, and in 1889 the platinum–iridium International Prototype of the Kilogram replaced it. Water's density anomaly, discussed elsewhere in this article, is therefore the reason the 4 °C reference point was chosen.\n\nThe litre followed a similar path. From 1901 to 1964 it was defined as the volume of one kilogram of pure water at maximum density and standard pressure. The prototype kilogram was later found to be about 28 parts per million too heavy, so a litre in that period was about 1.000028 cubic decimetres. Because water's mass–volume relationship depends on temperature, pressure, purity and isotopic composition, a water-based definition cannot reach high precision. The litre is now simply one cubic decimetre, a unit accepted for use with the SI but not itself an SI unit.\n\nThe kilogram and the redefinition of the SI\n\nThe mass standard was eventually detached from water and from artefacts altogether. The current definition, adopted in 2019, fixes the numerical value of the Planck constant and derives the kilogram from it together with the second and the metre. The modern kilogram agrees with the original 1795 concept to within about 30 parts per million, which is consistent with the water-based value that was the starting point. In practice, a metrology laboratory can calibrate a Kibble balance against the constant directly, so water no longer serves as a reference for mass.\n\nThe triple point of water and the kelvin\n\nWater's triple point, where ice, liquid water and vapour coexist, once anchored the temperature scale. In 1954 the General Conference on Weights and Measures defined the kelvin as 1/273.16 of the thermodynamic temperature of the triple point, which was set at exactly 273.16 K. The reason for choosing water was practical: the state is unique and can be reproduced in a sealed cell, and the cells can be realised with an uncertainty below 0.1 millikelvin. Cells of this kind, often called Type A or Type B designs, are standard in calibration laboratories.\n\nThe 2019 revision of the SI changed the logic. The kelvin is now defined by fixing the Boltzmann constant at 1.380649×10⁻²³ J K⁻¹, and the triple point became a measured quantity. Its value is about 273.16 K and 611.657 Pa, with an uncertainty of around 0.0001 K. Isotopic composition affects the result: water with an improper isotopic mix can shift a triple-point cell by several hundred microkelvin, which is why the isotopic purity of cell water is controlled.\n\nIsotope reference standards and analytical measurement\n\nStable isotope data for water and for many other materials are reported relative to reference waters. In 1968 the International Atomic Energy Agency (IAEA) in Vienna issued Vienna Standard Mean Ocean Water (VSMOW), water distilled from ocean water and free of salt. Its hydrogen and oxygen isotope ratios define the zero point of the delta scale, expressed in per mil relative to VSMOW. A companion standard, Standard Light Antarctic Precipitation (SLAP), was issued to anchor the depleted end of the scale, and both were later superseded by VSMOW2 and SLAP2. Because evaporation and condensation shift the isotopic balance of natural water, the reference scale allows measurements from different laboratories and environments to be compared.\n\nAnalysing water in practice involves several separate measurements. Total dissolved solids are commonly estimated by evaporating a filtered sample to dryness and weighing the residue, or by measuring electrical conductivity and converting it. Trace contaminants, including metals, are measured by techniques such as atomic absorption spectrometry and inductively coupled plasma mass spectrometry, which detect concentrations at the microgram-per-litre level and below. Water activity, which describes how much water is available to participate in chemical or biological processes, is measured with a hygrometer or dew-point sensor, and pure water has a value of 1. Each technique requires its own calibration and reference material, and results are only comparable when those references are traceable to the same standards."
    },
    {
      "heading": "Drinking water and sanitation",
      "text": "Drinking-water standards rest on health-based limits rather than on taste or appearance alone. The World Health Organization's GDWQ provide the scientific point of departure for standard setting and regulation. The guidelines weigh the health risk presented by the various microbiological, chemical, physical and radiological hazards, and may also derive numerical \"guidelines values\" for constituents of water or indicators of water quality. The most recent update, a third addendum released in mid-2026, keeps a framework built on three parts: health-based targets for the highest-priority risks, water safety planning to manage supplies proactively, and independent surveillance to ensure water safety planning is effective and health-based targets are met. A fifth edition is being prepared, with reviews of per- and polyfluoroalkyl substances (PFAS) and disinfection by-products (DBPs).\n\nSurface water, which supplies much of the world's drinking water, passes through a multi-stage treatment train. Plain settling is not enough, because smaller and lighter particles settle very slowly or in some cases do not settle at all. The process therefore begins with coagulation, in which chemicals are added to bind fine particles into larger masses. Aluminum sulfate (alum) is the most common coagulant used for water purification. Gentle agitation then lets the flocs collide and grow, and in the sedimentation basin the heavy floc particles settle out. Filtration follows: water percolates through sand or other granular media, and suspended particles become trapped within the pore spaces of the filter media, which also remove harmful protozoa and natural colour. For disinfection, chlorine, chloramines, ozone or other disinfectants are added to the water to destroy potentially harmful germs such as bacteria, viruses, parasites and other organisms. Disinfectants destroy the pathogen through oxidation or radiation and disrupts its ability to function, grow, and/or replicate. Chlorine has the further advantage that its residual keeps disinfecting as water moves through the distribution network.\n\nWaterborne diseases such as cholera, typhoid and other diarrhoeal illnesses spread mainly when faecal material enters drinking water, food or hands. Cholera is caused by the bacterium Vibrio cholerae and typhoid by Salmonella Typhi, while diarrhoeal disease can arise from many bacteria, viruses and protozoa. Some protozoa are resistant to chlorine at ordinary doses; ozone treatment, for example, is noted for inactivating harmful bacteria, including Giardia and Cryptosporidium. Treatment alone cannot close every route of transmission, which is why sanitation infrastructure matters as much as treatment. Safe excreta containment, sewers and latrines separate human waste from water sources, and handwashing and hygiene break the remaining links. In this sense, the two systems form complementary barriers: if one fails, the other limits the spread of infectious disease within a community.\n\nMonitoring by the WHO and UNICEF Joint Monitoring Programme (JMP) tracks progress globally. The JMP compiles data from nationally representative household surveys and censuses, administrative data and service provider data. Its 2025 report, covering 2000 to 2024, found that in 2024, three out of four people had safely managed drinking water, but people in least developed countries were more than twice as likely to lack access. The highest service tier is defined as the highest level of drinking water service and indicates reliable access to safe drinking water. Progress has been substantial, with since 2015, 961 million people have gained access to safely managed drinking water services. Even so, as of 2024, 2.1 billion people still lack safely managed drinking water, and universal access by 2030 remains an ambitious goal. These figures underline the gap between the technical standards set by the WHO and the conditions in which many people actually obtain their water."
    },
    {
      "heading": "Human use: agriculture, industry and energy",
      "text": "Agriculture is by far the largest user of freshwater. Agriculture remains by far the largest water user globally – accounting for 72 percent of freshwater withdrawals – with irrigation as the primary driver. Irrigation is productive because it concentrates water where crops need it: irrigated agriculture produces about 40 percent of the world's food on only 20 percent of global cropland. Much of this water comes from aquifers, with groundwater supplying about 25% of all water used for irrigation. Some states depend almost entirely on irrigated farming; Bahrain, Egypt, Saudi Arabia, Suriname, and Uzbekistan have over 90 per cent of cultivated land equipped with irrigation infrastructure.\n\nOrganised irrigation is one of the oldest forms of large-scale water management. In Mesopotamia, farming communities between the Tigris and Euphrates dug canals and basins to carry river water onto fields, and the scale of that work is often linked to the emergence of early states. In ancient Egypt, the Nile's seasonal flood was captured in basins and channels so that fields could be watered after the river receded. These systems, in various forms, remain the basis of irrigation today, though modern schemes use pumps, groundwater wells and pressurised delivery.\n\nIndustry is the second-largest category of withdrawal, although estimates differ by source and by classification. The UN's 2025 figures give the industrial sector 15 per cent, while UNESCO reports industry at just under 20%. Industrial water serves three broad functions: removing heat from machinery, carrying out processing steps such as washing, dilution and chemical reaction, and acting as a solvent for reagents and products. Withdrawal statistics must be read with care, since the data reflects global freshwater withdrawals, not total water use (which includes recycled and non-renewable sources). Much of the water taken by industry is returned to rivers, so withdrawal totals overstate the water that is actually lost. Industrialisation, which accelerated after the industrial-revolution, raised demand sharply in the nineteenth and twentieth centuries.\n\nElectricity generation is the most water-intensive industrial use. Over 80% of global electricity generation comes from thermoelectric power plants including fossil fuels and nuclear. These plants boil water into steam that drives a steam-turbine, and the spent steam must then be condensed back to liquid, which is where most of the water goes. Roughly 10% of the global water withdrawals is for energy production. The share is much larger in some countries: thermoelectric power plants are responsible for 41 percent of all water withdrawals in the United States, according to one analysis, while the USGS places electric power generators at about 40% of total water withdrawals in the United States.\n\nThe cooling method determines how much water is withdrawn and how much is lost. Plants with once-through cooling systems withdrew the greatest amounts of water, accounting for 76 percent of all withdrawals. Such systems pass river or lake water through heat exchangers and return it, so withdrawals are large but losses are small. Recirculating systems use cooling towers or ponds, and they account for much of the actual loss: plants with recirculating cooling systems accounted for 67 percent of total thermoelectric-power consumptive use. Overall, total national-level model-estimated water consumption was approximately 2.7 Bgal/d, which was about 3 percent of the total water withdrawn. Dry cooling reduces the demand considerably, with one study finding that it can reduce water consumption and withdrawal by more than 75% compared with wet recirculating cooling towers. The dependence on cooling water also creates vulnerability during droughts and heatwaves, when plants can be forced to reduce output.\n\nHydroelectric power converts the energy of flowing water into electricity, usually by damming a river and releasing water through turbines, which is why it is closely tied to electricity and to the wider electrical-grid. Reservoir schemes do not consume the water they use: as reservoir‐based hydroelectric project utilizes but does not consume a continually flowing river, there is no net loss in the resource itself. However, the output depends heavily on the river's behaviour. Lower river flows will reduce the amount of live storage in a reservoir therefore reducing the amount of water that can be used for hydroelectricity. Run-of-river plants have little or no storage capacity and are therefore strongly dependent on streamflow conditions. Reservoirs can also cut downstream flow through evaporation, and the risk of flow shortage may increase as a result of climate change. Competing demands are common: in the Amu Darya basin, one study found that an increase in water allocation for irrigation by $1.02 \\times 10^9$ m3 results in a 69.9% reduction in water allocation for hydropower generation.\n\nTaken together, these uses make water a core input to renewable-energy and fossil-fuel power alike, and the agricultural and energy sectors compete for the same rivers and aquifers. Balancing that competition is a central problem in water management, discussed further in the sections on scarcity and climate change."
    },
    {
      "heading": "Scarcity, pollution and freshwater ecosystems",
      "text": "Groundwater is the main hidden reservoir behind water scarcity. Hydrological reviews estimate that more than 70% of the global water consumption is provided by groundwater extraction. Where pumping outstrips natural recharge, the water table falls and does not recover on human timescales; water tables can drop by several hundred meters in heavily exploited systems. The North China Plain is a well-documented case: water tables have dropped on average by 1–3 m per year in the region, and total demand there has been estimated to exceed natural recharge by a factor of about 1.5. Satellite gravity measurements over northern India recorded a net loss of 109 km^3 of groundwater between 2002 and 2008, a volume about double the capacity of India's largest surface reservoir. A UN assessment cited in a later review found that around 70 percent of the world's major aquifers show long-term declines.\n\nOver-pumping also changes the ground itself. As pore pressure in aquifers falls, the sediment compacts, which causes land subsidence. The same UN assessment links this process to more than 6 million square kilometers, almost 5 percent of the global land area, and nearly 2 billion people. Subsidence permanently reduces the storage capacity of the aquifer and raises flood risk in coastal cities and deltas. Scarcity is therefore not only a question of how much water exists but of whether withdrawals can be sustained; in hydrological terms, physical scarcity occurs when there is not enough water to meet all demands, including environmental flows.\n\nNutrient pollution and eutrophication\n\nExcess nitrogen and phosphorus from farms, cities and industry are among the most widespread problems in surface waters. Excess nutrients, usually nitrogen or phosphorus, stimulate algal growth, and the resulting enrichment is known as eutrophication. Its main sources include surface runoff from farm fields and pastures, discharges from septic tanks and feedlots, and emissions from combustion, while untreated sewage is a major contributor because it is rich in nutrients. The consequences include hypoxic \"dead zones\" that suppress fish and shellfish production and harmful algal blooms that threaten drinking water. In 2019, a review by the same research community estimated annual losses of $1 billion for European coastal waters and $2.4 billion for lakes and streams in the United States. Toxic blooms have repeatedly interrupted supplies: in China's Lake Taihu they have cut off drinking water supplies for nearly 10 million people, and in Brazil in 1996 toxins from a eutrophic reservoir killed 76 people after a dialysis clinic's filtration system failed. Scientists still debate whether phosphorus, nitrogen or both must be cut, and many agencies now control both.\n\nChemical contaminants and their pathways\n\nAgricultural runoff is a major route for chemicals into freshwater. Lakes and rivers are being polluted with fertilizers and pesticides carried in runoff from agricultural fields. Pesticide residues, heavy metals from mining and metal processing, and effluents from industrial plants enter water through similar pathways: surface discharge, runoff and atmospheric deposition. Contaminants that reach rivers and lakes can then move underground. Polluted water from the surface, such as rivers and streams, makes its way into the groundwater more quickly and easily, so a contamination problem in one compartment often becomes a problem for the other. Over-extraction compounds this, because lowering water tables can draw contaminated water toward wells. Newer concerns include pharmaceuticals and microplastics, which are increasingly reported in aquatic systems.\n\nHabitats and freshwater biodiversity\n\nLakes, rivers and wetlands cover less than 1 percent of the Earth's surface yet hold nearly 10 per cent of all living species, so their decline has disproportionate effects. Wetlands are a particular concern: globally, wetlands have declined three times faster than forests, and according to the Living Planet Report 2020, freshwater vertebrate populations have declined by 84% since 1970. Of the nearly 29,500 freshwater-dependent species assessed for the IUCN Red List, 27% are threatened with extinction.\n\nThe biodiversity losses trace to a small set of drivers that are usually listed together: flow alteration, pollution, habitat degradation and loss, overexploitation of species, and invasive non-native species. Dams are a major form of habitat change, since most of the world's large rivers are fragmented by dams, to the detriment of migratory fish and many invertebrate animals. Pollution and altered flow often act together, and invasive species add further pressure. Restoration can succeed when the sources are controlled: one example cited in an international recovery plan is Singapore's clean-up of its river from the 1970s, which removed pollution from pig and duck farms and industry and restored aquatic life."
    },
    {
      "heading": "Climate change and the water cycle",
      "text": "Climate change affects the water-cycle mainly through the thermodynamics of the atmosphere. The amount of water vapour air can hold rises with temperature. Near surface conditions, the saturation vapour pressure follows the Clausius–Clapeyron relation, \\(\\frac{1}{e_s}\\frac{de_s}{dT} = \\frac{L}{R_v T^2}\\), which gives a fractional increase of roughly 6–7 percent per kelvin. Extreme precipitation is expected to intensify with global warming over large parts of the globe as the concentration of atmospheric water vapour which supplies the water for precipitation increases in proportion to the saturation concentrations. The climate-change assessments of the Intergovernmental Panel on Climate Change conclude that the water cycle has been intensifying and will continue to intensify as the planet warms.\n\nChanges in precipitation show up as two opposing tendencies rather than a uniform trend. Heavier downpours increase in many places, while the intervals between rain events lengthen in others. These changes produce two seemingly contradictory effects: more intense downpours, leading to more floods, yet longer dry periods between rain events, leading to more drought. The increase in atmospheric moisture drives a higher rate of evaporation, so the same warming that feeds storms also dries soils and vegetation. Storm-affected areas are likely to experience increases in precipitation and increased risk of flooding, while areas located far away from storm tracks are likely to experience less precipitation and increased risk of drought. Assessments also report that every additional 0.5°C of warming will discernibly increase the intensity and frequency of heavy precipitation events, as well as agricultural and ecological drought in some regions. The drought and flood record is therefore shaped by local atmospheric circulation as well as by the global moisture increase.\n\nThe frozen parts of the cryosphere respond to warming in a distinct way. At high latitudes and at high elevation, further changes occur due to the loss of frozen water. Seasonal timing also shifts: snow tends to start accumulating later in the fall, and melt earlier in the spring. Earlier melt contributes to the more flooding associated with earlier snow melt at high northern latitudes, and it reduces the stored snowpack that many river systems depend on through the dry season. The result is a change in the timing of river flows, which affects water availability for irrigation, hydroelectric generation and drinking supplies in many regions even where total annual precipitation changes little.\n\nMelting of glacier and ice-sheet ice adds water to the ocean, and the warming ocean expands. Global mean sea level has risen about 8–9 inches (21–24 centimeters) since 1880. The rising water level is mostly due to a combination of melt water from glaciers and ice sheets and thermal expansion of seawater as it warms. The relative importance of the two has changed over time. As a result, the amount of sea level rise due to melting from 2005–2013 was nearly twice the amount of sea level rise due to thermal expansion. Taken together, ice sheet melt and thermal expansion now account for about two-thirds of observed global mean sea level rise. Mountain glacier meltwater currently contributes another 20%, while declining freshwater water storage on land adds the remaining 10%. The ice sheets are the largest uncertainty in long-term projections, because warmer waters erode the edges of ice sheets from below, destabilizing them and speeding up ice loss.\n\nWater vapour is also central to the climate system's response to greenhouse gases. It is not a long-lived gas in the way that carbon dioxide is: its concentration responds quickly to temperature. As the planetary temperature warms, forced by increasing and other greenhouse gases, water vapor content of the atmosphere increases, thereby producing the strongest positive feedback in the climate system. Because water vapor is itself a greenhouse gas, tropospheric moistening more than doubles the direct warming from carbon dioxide. Water vapour accounts for roughly half of the present-day greenhouse effect, so this amplification is the main reason that climate sensitivity to carbon dioxide is high. Human activities add vapour directly through irrigation, power plant cooling, aviation, and domestic water use, but the feedback that matters most for warming is the one driven by temperature-controlled evaporation from the surface. Within the atmosphere-of-earth, the feedback interacts with clouds, and the net effect is a central subject of climate-model research."
    },
    {
      "heading": "Religion, philosophy and culture",
      "text": "Water is treated as purifying or sacred in most of the world's major religious traditions. Its ritual use usually rests on the everyday fact that water removes dirt and can restore what has been defiled. In Hinduism, bathing in sacred rivers such as the Ganges is associated with cleansing sin and impurity, and water is used in temple worship, in offerings to deities, and in the sipping rite known as achamana before prayer or meals. In Islam, ablution (wudu) before ritual prayer follows a prescribed order of washing the face, arms, head and feet, and a full-body washing (ghusl) is required after certain states of ritual impurity. The water must be pure. In Judaism, immersion in a mikveh (ritual bath) restores ritual purity after menstruation, childbirth and conversion, and handwashing is performed before eating bread. In Christianity, baptism by immersion or pouring marks initiation and the washing away of sin, and blessed water is used for sprinkling and blessings in Catholic and Orthodox practice.\n\nIn Chinese thought, water is one of the five phases (wu xing) alongside wood, fire, earth and metal. These phases pass through cycles of generation and overcoming, and water is linked to winter, the north, the colour black and, in traditional Chinese medicine, the kidney system. The Taoist text attributed to Laozi praises water for benefiting all things without contending with them, and its low-seeking, yielding flow becomes a model for the sage's conduct. Mencius, a Confucian writer of the 4th–3rd century BCE, compared the natural goodness of human nature to water that flows downward. Chinese landscape painting, in which mountains and water are paired, extends the same balance of opposing forces into art.\n\nIn the West, ancient Greek philosophy gave water a central place in the search for a primary substance. Thales of Miletus (c. 624–546 BCE) is reported to have held that everything arises from water, and his claim is usually regarded as the first recorded attempt to explain the world through a single underlying material. Aristotle later placed water among four elements, along with earth, air and fire, each defined by a pair of qualities; water was cold and wet. This scheme shaped European natural philosophy for many centuries, until chemical analysis in the late eighteenth century, including the work of Henry Cavendish and Antoine Lavoisier, showed that water is a compound. Ancient cosmologies also placed water at the origin of things. Egyptian thought described a primordial watery abyss called Nun, Mesopotamian myths described the freshwater Apsu and the saltwater Tiamat, and the opening of the Book of Genesis describes a watery deep over which the spirit of God moves.\n\nWater also recurs in literature and art as a symbol of life, purity, renewal and danger. Heraclitus's remark about never stepping into the same river twice became a lasting image of change and impermanence. The Flood narrative in Genesis combines destruction with a new beginning, and baptism draws on the same double meaning, in which a person passes through water and is reborn. Shakespeare's Ophelia, whose death by drowning is reported in Hamlet (c. 1600), made water a symbol of despair and loss. Katsushika Hokusai's woodblock print The Great Wave off Kanagawa (c. 1831) presents the sea as both beautiful and overwhelming. Across these works, the same substance that sustains life and cleanses can also overwhelm and destroy, which accounts for much of its enduring symbolic weight."
    },
    {
      "heading": "Open questions and active research",
      "text": "Two-state versus one-state models of liquid water\n\nThe local organisation of liquid water is still unsettled. The two-state picture traces back to Röntgen and holds that liquid water contains a mixture of two kinds of local structure: a locally favoured tetrahedral arrangement and a more disordered, normal-liquid arrangement. In this view the balance between them shifts with temperature and pressure, and the same mixture can account for the thermodynamic anomalies, including the density maximum near 4 °C. The rival tradition is the continuum picture introduced by John Pople in 1951, which describes water as one continuously distorted hydrogen-bond network without discrete states. For more than a century the two camps have disagreed largely because experiments could not isolate evidence for one model over the other. A 2020 analysis of simulated and scattering data argued for coexisting structural motifs, but a rival interpretation of the same X-ray data has persisted, and some work questions whether bulk water really contains two discrete states at all.\n\nRecent work has tried to supply the missing molecular-level evidence. In 2026 researchers reported molecular-scale signatures of two structures in liquid water, interconverting along reaction pathways whose shape depends on whether the system lies near the phase boundary between the two liquids. Such results strengthen the two-state case but have not closed the debate, and critics point out that fitted two-state equations can reproduce bulk density data while failing on other properties such as compressibility. The question matters beyond physical chemistry, because the same local structural picture is used to interpret the behaviour of water in solutions, where solutes are normally treated as sitting in a single homogeneous solvent.\n\nThe hidden critical point in supercooled water\n\nWater's conventional liquid–vapour critical point lies at about 647 K and 221 bar. In 1992 a simulation study by Peter Poole and colleagues proposed that deeply supercooled water possesses a second, liquid–liquid critical point (LLCP), at pressures roughly 2000 times atmospheric pressure, where a low-density and a high-density liquid would become indistinguishable. Such a point would explain the rising compressibility and heat capacity of cooled water, and the density maximum, as the signatures of approaching a phase boundary. The hypothesis is difficult to test because supercooled water crystallises within a short time window, the so-called no-man's land between roughly 150 K and the homogeneous nucleation line.\n\nSimulations have since supported the idea. Work by Pablo Debenedetti and colleagues using long molecular dynamics runs on the TIP4P/2005 and TIP4P/Ice models found a metastable LLCP with critical behaviour in the three-dimensional Ising universality class, and separate analyses placed the hypothetical point near 170 K in one model and 190 K in another. Experimental evidence has been more indirect. Studies of amorphous ice and of water confined in nanopores have reported fragile-to-strong dynamical crossovers consistent with the Widom line emanating from such a point. In a 2020s experiment, Anders Nilsson, Kyung Hwan Kim and colleagues melted samples of ice formed below 136 K with an infrared laser and probed the resulting liquid with an X-ray free-electron laser, reporting what many commentators regard as the closest direct experimental approach yet to the critical point, though the location and existence of the point remain under discussion.\n\nConfined water and interfaces\n\nWater in nanopores, on mineral surfaces, and in biological channels can differ strongly from bulk water. Measurements on water in silica nanopores by Li Liu, Sow-Hsin Chen and colleagues used neutron scattering to avoid crystallisation and identified a fragile-to-strong dynamic transition whose temperature falls with pressure, reaching the homogeneous nucleation line near 1600 bar. The authors linked this endpoint to a possible second critical point. Confined water can show modified hydrogen-bond networks, an altered dielectric constant, slower hydrogen-bond dynamics, and higher compressibility than bulk water at the same temperature. Some reports suggest that surface tension departs from its bulk value when the radius of curvature falls below about 10 nm, though such figures depend on the measurement method.\n\nThe interpretation of these effects is itself contested. Surface-specific vibrational spectroscopy of water between graphene and calcium fluoride surfaces found that structure is governed mainly by the two interfaces until the gap shrinks to the angstrom scale, implying that many anomalies attributed to confinement may reflect interfacial rather than geometric effects. Other studies show that confined water remains distinct over a wider range of dimensions. Because bulk thermodynamic data and the models built on them may not transfer directly to nanometre-scale or membrane environments, the behaviour of water at biological interfaces, in desalination membranes and in geological pore spaces remains an active research front.\n\nOrigin of Earth's oceans\n\nThe question of when and how Earth acquired its water is closely linked to the same structural puzzles, because the isotopic and chemical signatures of water in different reservoirs constrain its sources. Proposed sources include volatile-rich material accreted during planet formation, water retained from the solar nebula, and water delivered later by comets or water-bearing asteroids. The relative contributions of these pathways, and whether the oceans formed early in Earth's history or mainly after a later phase of impacts, remain debated. Answers depend on measurements of deuterium-to-hydrogen ratios and noble-gas isotopes in meteorites, comets and mantle rocks. Parallel observations of water in protoplanetary disks and exoplanet atmospheres are beginning to show how common water-rich planetary systems may be, although the abundance of water in other planetary systems is still poorly constrained."
    }
  ],
  "links": [
    "molecule",
    "heat-capacity",
    "hydrogen-bond",
    "solvent",
    "water-cycle",
    "vsepr-theory",
    "covalent-bond",
    "ion",
    "dielectric",
    "latent-heat",
    "atmosphere-of-earth",
    "xylem",
    "critical-point",
    "phase-diagram",
    "kelvin",
    "hydrophobic-effect",
    "cell-membrane",
    "henrys-law",
    "hydrolysis",
    "ph",
    "chemical-equilibrium",
    "acid-base-reaction",
    "ocean-acidification",
    "carbon-cycle",
    "neutron",
    "glacier",
    "ice-sheet",
    "climate",
    "hydrosphere",
    "groundwater",
    "evaporation",
    "transpiration",
    "evapotranspiration",
    "surface-runoff",
    "cellular-respiration",
    "metabolism",
    "adenosine-triphosphate",
    "osmosis",
    "homeostasis",
    "chloroplast",
    "thermoregulation",
    "henry-cavendish",
    "antoine-lavoisier",
    "linus-pauling",
    "chemical-bond",
    "x-ray-crystallography",
    "chemistry",
    "international-system-of-units",
    "planck-constant",
    "metrology",
    "boltzmann-constant",
    "cholera",
    "sanitation",
    "infectious-disease",
    "world-health-organization",
    "mesopotamia",
    "ancient-egypt",
    "irrigation",
    "industrial-revolution",
    "steam-turbine",
    "electricity",
    "electrical-grid",
    "renewable-energy",
    "aquifer",
    "land-subsidence",
    "eutrophication",
    "harmful-algal-bloom",
    "biodiversity",
    "invasive-species",
    "climate-change",
    "cryosphere",
    "climate-model",
    "hinduism",
    "islam",
    "judaism",
    "christianity",
    "traditional-chinese-medicine",
    "taoism",
    "ancient-greece",
    "aristotle"
  ],
  "sources": [
    {
      "title": "Polarity and Molecular Dipole Moments in Water (H₂O)",
      "url": "https://www.pearson.com/channels/general-chemistry/study-guides/polarity-and-molecular-dipole-moments-in-water"
    },
    {
      "title": "Chemical bonding of water",
      "url": "https://en.wikipedia.org/wiki/Chemical_bonding_of_water"
    },
    {
      "title": "Bent%27s rule",
      "url": "https://en.wikipedia.org/wiki/Bent%27s_rule"
    },
    {
      "title": "Trends in Group 16 Hydrides Tutorial",
      "url": "https://www.ausetute.com.au/trend16H.html"
    },
    {
      "title": "H2S (Hydrogen sulfide) properties",
      "url": "https://www.webqc.org/compound-H2S-H2S.html"
    },
    {
      "title": "Hydrogen chalcogenide",
      "url": "https://en.wikipedia.org/wiki/Hydrogen_chalcogenide"
    },
    {
      "title": "High efficiency hydrogen oxygen generation system and method",
      "url": "https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/11291972"
    },
    {
      "title": "IB Chemistry: Why H₂O Is Bent (Molecular Shape)",
      "url": "https://www.revisiondojo.com/blog/why-h-o-is-bent-molecular-shape-explained"
    },
    {
      "title": "Hydrogen Bonding in Water",
      "url": "https://www.esalq.usp.br/lepse/imgs/conteudo_thumb/Hydrogen-Bonding-in-Water.pdf"
    },
    {
      "title": "Hydrogen bonding in water",
      "url": "https://water.lsbu.ac.uk/water/water_hydrogen_bonding.html"
    },
    {
      "title": "Structure of Water and Hydrogen Bonding",
      "url": "https://www.varsitytutors.com/practice/subjects/ap-biology/lessons/structure-of-water-and-hydrogen-bonding"
    },
    {
      "title": "Tetrahedrality, hydrogen bonding and the density anomaly of the central force water model. A Monte Carlo study",
      "url": "https://arxiv.org/pdf/2110.04549"
    },
    {
      "title": "Tetrahedral structure or chains for liquid water",
      "url": "https://www.pnas.org/content/103/21/7973"
    },
    {
      "title": "The Individual and Collective Effects of Exact Exchange and Dispersion Interactions on the Ab Initio Structure of Liquid Water",
      "url": "https://arxiv.org/pdf/1405.5265"
    },
    {
      "title": "Ab initio theory and modeling of water",
      "url": "https://arxiv.org/pdf/1709.10493"
    },
    {
      "title": "Hydrogen-bond structure dynamics in bulk water",
      "url": "https://pubs.rsc.org/en/content/articlepdf/2018/sc/c7sc04205a"
    },
    {
      "title": "7.3: Hydrogen-Bonding and Water - Chemistry LibreTexts",
      "url": "https://chem.libretexts.org/Bookshelves/General_Chemistry/Chem1_(Lower)/07:_Solids_and_Liquids/7.03:_Hydrogen-Bonding_and_Water"
    },
    {
      "title": "Scientists find molecular-level evidence for two structures in liquid water",
      "url": "https://phys.org/news/2026-06-scientists-molecular-evidence-liquid.html"
    },
    {
      "title": "The anomalies and criticality of liquid water - PubMed",
      "url": "https://pubmed.ncbi.nlm.nih.gov/33060296/"
    },
    {
      "title": "Evidence for the generic existence of two local structures in liquid water",
      "url": "https://www.nature.com/articles/s41567-026-03301-8"
    },
    {
      "title": "Phase diagram",
      "url": "https://en.wikipedia.org/wiki/Phase_diagram"
    },
    {
      "title": "Phase Diagrams",
      "url": "https://chemed.chem.purdue.edu/genchem/topicreview/bp/ch14/phase.php"
    },
    {
      "title": "Phase Diagrams",
      "url": "https://farside.ph.utexas.edu/teaching/sm1/Thermalhtml/node121.html"
    },
    {
      "title": "The distinction between Ice phases VII, VIII and X",
      "url": "https://arxiv.org/pdf/2504.06244"
    },
    {
      "title": "Ice phases Phase diagram Ice crystal data",
      "url": "https://www.idc-online.com/technical_references/pdfs/chemical_engineering/Ice_phases.pdf"
    },
    {
      "title": "Observation of hexagonal close-packed water ice at conditions in ice giant planetary interiors",
      "url": "https://arxiv.org/pdf/2510.24305"
    },
    {
      "title": "Proceedings of the International School of Physics “Enrico Fermi”",
      "url": "https://www.loerting.at/publications/fuentes15-ios.pdf"
    },
    {
      "title": "7.3: Nucleation of Ice Crystals - Geosciences LibreTexts",
      "url": "https://geo.libretexts.org/Bookshelves/Meteorology_and_Climate_Science/Practical_Meteorology_(Stull)/07:_Precipitation_Processes/7.03:_Nucleation_of_Ice_Crystals"
    },
    {
      "title": "1 Supercooling of Water Peter Wilson Tsukuba University Japan 1. Introduction",
      "url": "https://cdn.intechopen.com/pdfs/31428/InTech-Supercooling_of_water.pdf"
    },
    {
      "title": "Phase Diagram for Water",
      "url": "https://courses.lumenlearning.com/umes-cheminter/chapter/phase-diagram-for-water/"
    },
    {
      "title": "The everlasting hunt for new ice phases",
      "url": "https://www.nature.com/articles/s41467-021-23403-6"
    },
    {
      "title": "Ultrasonic freeze ablation catheters and probes",
      "url": "https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/5139496"
    },
    {
      "title": "The spontaneous nucleation of supercooled water",
      "url": "https://royalsocietypublishing.org/rspa/article/215/1120/65/8838/The-spontaneous-nucleation-of-supercooled-water"
    },
    {
      "title": "From Stacking Disorder to Cubic Order: Ice Crystallization from Deeply Supercooled Water",
      "url": "https://arxiv.org/pdf/2607.03465"
    },
    {
      "title": "The homogeneous nucleation in supercooled water. An examination using statistics and irreversible thermodynamics",
      "url": "https://www.researchgate.net/publication/251518601_The_homogeneous_nucleation_in_supercooled_water_An_examination_using_statistics_and_irreversible_thermodynamics"
    },
    {
      "title": "Carbonate and Bicarbonate in Water - Basic Water Science 101",
      "url": "https://basicwaterscience.com/chemical-water-quality-parameters/primary-anions-and-cations/carbonate-and-bicarbonate/"
    },
    {
      "title": "Recirculation Aquaculture: Buffering",
      "url": "http://web.utk.edu/~rstrange/wfs556/html-content/04-buffering.html"
    },
    {
      "title": "Freshwater acidification",
      "url": "https://en.wikipedia.org/wiki/Freshwater_acidification"
    },
    {
      "title": "PH",
      "url": "https://en.wikipedia.org/wiki/PH"
    },
    {
      "title": "How Does Temperature Affect pH? - Westlab",
      "url": "https://www.westlab.com/blog/how-does-temperature-affect-ph"
    },
    {
      "title": "The Carbonate System: Acid-Base Reactions in Aquatic Systems • Environmental Studies (EVS) Institute",
      "url": "https://evs.institute/environmental-chemistry/carbonate-system-acid-base-reactions-aquatic/"
    },
    {
      "title": "fact sheet ast0643",
      "url": "https://www.uwa.edu.au/study/-/media/faculties/science/docs/researching-ocean-buffering.pdf"
    },
    {
      "title": "Autoionization of water (video)",
      "url": "https://www.khanacademy.org/science/ap-chemistry-beta/x2eef969c74e0d802:acids-and-bases/x2eef969c74e0d802:introduction-to-acids-and-bases/v/autoionization-of-water-ap"
    },
    {
      "title": "Self-Ionization of Water (Kw) - Symbols, Calculations and Concept",
      "url": "https://flexbooks.ck12.org/cbook/ck-12-chemistry-flexbook-2.0/section/21.8/primary/lesson/ion-product-of-water-chem/"
    },
    {
      "title": "Heavy water",
      "url": "https://en.wikipedia.org/wiki/Heavy_water"
    },
    {
      "title": "Heavy Water (D2O) - Density, Properties & Production",
      "url": "https://youblob.com/us/blueprints/0627w69b"
    },
    {
      "title": "What Is D2O? The Properties and Uses of Heavy Water - Biology Insights",
      "url": "https://biologyinsights.com/what-is-d2o-the-properties-and-uses-of-heavy-water/"
    },
    {
      "title": "Tritium - an overview",
      "url": "https://www.sciencedirect.com/topics/earth-and-planetary-sciences/tritium"
    },
    {
      "title": "Tritium concentrations and consequent doses in bottled natural and mineral waters sold in Turkey and Azerbaijan - ScienceDirect",
      "url": "https://www.sciencedirect.com/science/article/abs/pii/S0045653520329192"
    },
    {
      "title": "Investigation of the Environmental Fate of Tritium in the Atmosphere",
      "url": "https://www.nrc.gov/docs/ML1029/ML102990100.pdf"
    },
    {
      "title": "Global meteoric water line",
      "url": "https://en.wikipedia.org/wiki/Global_meteoric_water_line"
    },
    {
      "title": "Oxygen isotopes in paleoclimatology",
      "url": "https://fiveable.me/isotope-geochemistry/unit-7/oxygen-isotopes-paleoclimatology/study-guide/lJT2YD3uaXjg4VtA"
    },
    {
      "title": "Oxygen Isotopes and Paleoclimate",
      "url": "https://itssedimentary.com/2016/10/26/direct-measurements-for-global-temperature-only/"
    },
    {
      "title": "Oxygen Isotope Analysis in Paleoclimatology — Geological Society of the Oregon Country (GSOC)",
      "url": "https://www.gsoc.org/news/2020/10/16/oxygen"
    },
    {
      "title": "Calculating ancient temperatures using oxygen - Research Outreach",
      "url": "https://researchoutreach.org/community-content/calculating-ancient-temperatures-using-oxygen/"
    },
    {
      "title": "Heavy Water",
      "url": "https://byjus.com/jee/heavy-water-preparation-properties/"
    },
    {
      "title": "Heavy Water, Deuterium Oxide, D 2 O",
      "url": "https://www.matweb.com/search/datasheet_print.aspx?matguid=5f6bec9d37a84a77bcf295bf3653ac58"
    },
    {
      "title": "WATER, HEAVY",
      "url": "https://www.chembk.com/en/chem/WATER,%20HEAVY"
    },
    {
      "title": "Tritiated water - Wikiwand",
      "url": "https://www.wikiwand.com/en/Tritiated_water"
    },
    {
      "title": "Tritiated water — Grokipedia",
      "url": "https://grokipedia.com/page/Tritiated_water"
    },
    {
      "title": "how much natural water there",
      "url": "https://usgs.gov/faqs/how-much-natural-water-there"
    },
    {
      "title": "Water on Earth - Geography Realm",
      "url": "https://www.geographyrealm.com/water-earth/"
    },
    {
      "title": "How Much Water is There on Earth?",
      "url": "https://www.usgs.gov/special-topics/water-science-school/science/how-much-water-there-earth"
    },
    {
      "title": "Water distribution on Earth",
      "url": "https://en.wikipedia.org/wiki/Water_distribution_on_Earth"
    },
    {
      "title": "Surface Unfrozen Freshwater_Baiduwiki",
      "url": "https://baike.baidu.com/en/item/Surface%20Unfrozen%20Freshwater/1433801"
    },
    {
      "title": "How much of the Earth's water is stored in glaciers?",
      "url": "https://www.usgs.gov/faqs/how-much-earths-water-stored-glaciers"
    },
    {
      "title": "LAKE BAIKAL - World Heritage Datasheet",
      "url": "http://www.yichuans.me/datasheet/output/site/lake-baikal/"
    },
    {
      "title": "Hydrosphere - Water Cycle, Oceans, Atmosphere",
      "url": "https://www.britannica.com/science/hydrosphere/The-water-cycle"
    },
    {
      "title": "Revisiting the contribution of transpiration to global terrestrial evapotranspiration - Wei - 2017 - Geophysical Research Letters - Wiley Online Library",
      "url": "https://agupubs.onlinelibrary.wiley.com/doi/full/10.1002/2016GL072235"
    },
    {
      "title": "Transpiration in the global water cycle - ScienceDirect",
      "url": "https://www.sciencedirect.com/science/article/abs/pii/S0168192314000203"
    },
    {
      "title": "The Hydrologic Cycle",
      "url": "https://courses.lumenlearning.com/wm-biology2/chapter/the-hydrologic-cycle/"
    },
    {
      "title": "Deltawerken - The Water Cycle",
      "url": "http://www.deltawerken.com/The-Water-Cycle/1448.html"
    },
    {
      "title": "HESS - The residence time of water in the atmosphere revisited",
      "url": "https://hess.copernicus.org/articles/21/779/2017/hess-21-779-2017.html"
    },
    {
      "title": "11.1 The Hydrologic Cycle",
      "url": "https://environmental-geology-dev.pressbooks.tru.ca/chapter/the-hydrological-cycle/"
    },
    {
      "title": "Water",
      "url": "https://cse.umn.edu/mgs/water"
    },
    {
      "title": "Structure of Water: AP® Biology Review",
      "url": "https://www.albert.io/blog/structure-of-water-ap-biology-review/"
    },
    {
      "title": "The Role of Water in Living Organisms (2.4.2)",
      "url": "https://www.tutorchase.com/notes/cie-a-level/biology/2-4-2-the-role-of-water-in-living-organisms"
    },
    {
      "title": "Revision Notes - Role of water in living organisms",
      "url": "https://www.sparkl.me/learn/ib/biology-sl/role-of-water-in-living-organisms/revision-notes/2260"
    },
    {
      "title": "The Role of Osmosis and Water Potential in Cells",
      "url": "https://www.bohrium.com/en/sciencepedia/feynman/keyword/osmotic_pressure_in_cells"
    },
    {
      "title": "CIE iGCSE Biology-3.2 Osmosis- Study Notes - IITian Academy",
      "url": "https://www.iitianacademy.com/igcse/igcse-biology/cie-igcse-biology-notes/cie-igcse-biology-3-2-osmosis-study-notes/"
    },
    {
      "title": "Plasmolysis",
      "url": "https://en.wikipedia.org/wiki/Plasmolysis"
    },
    {
      "title": "Photosynthesis",
      "url": "https://en.wikipedia.org/wiki/Photosynthesis"
    },
    {
      "title": "Flexi answers - Describe photolysis of water in photosynthesis.",
      "url": "https://www.ck12.org/flexi/life-science/photosynthesis/describe-photolysis-of-water-in-photosynthesis./"
    },
    {
      "title": "Sweat evaporation in humans: A molecular and thermodynamic perspective - Ashworth - 2026 - Experimental Physiology - Wiley Online Library",
      "url": "https://physoc.onlinelibrary.wiley.com/doi/10.1113/EP093011"
    },
    {
      "title": "Integrated cooling (i-Cool) textile of heat conduction and sweat transportation for personal perspiration management",
      "url": "https://www.ncbi.nlm.nih.gov/pmc/articles/PMC8531342/"
    },
    {
      "title": "12.4: Water and the Body’s Cooling System - Medicine LibreTexts",
      "url": "https://med.libretexts.org/Bookshelves/Nutrition/Realities_of_Nutrition_(Morrill)/06:_Fueling_the_Body/12:_WaterThe_Bodys_Inner_Sea/12.04:_Water_and_the_Bodys_Cooling_System"
    },
    {
      "title": "Sweating - an overview",
      "url": "https://www.sciencedirect.com/topics/biochemistry-genetics-and-molecular-biology/sweating"
    },
    {
      "title": "News",
      "url": "https://www.herschel.caltech.edu/news/nhsc2021-001"
    },
    {
      "title": "Gas phase water in the surface layer of protoplanetary disks",
      "url": "https://arxiv.org/html/astro-ph/0510635"
    },
    {
      "title": "Water in star-forming regions (WISH): Physics and chemistry from clouds to disks as probed by Herschel spectroscopy",
      "url": "https://arxiv.org/pdf/2102.02225"
    },
    {
      "title": "Why our water is billions of years old",
      "url": "https://www.mpe.mpg.de/7582718/news20210409"
    },
    {
      "title": "Water vapour and hydrogen in the terrestrial-planet-forming region of a protoplanetary disk",
      "url": "https://www.nature.com/articles/nature05867"
    },
    {
      "title": "Resolved ALMA observations of water in the inner astronomical units of the HL Tau disk",
      "url": "https://www.ncbi.nlm.nih.gov/pmc/articles/PMC11399093/"
    },
    {
      "title": "Ocean worlds exploration - ScienceDirect",
      "url": "https://www.sciencedirect.com/science/article/pii/S0094576516311511"
    },
    {
      "title": "Exploring the Interior of Europa with the Europa Clipper - PMC",
      "url": "https://pmc.ncbi.nlm.nih.gov/articles/PMC10457249/"
    },
    {
      "title": "Europa appears to have a subsurface ocean like Enceladus",
      "url": "https://www.syfy.com/syfy-wire/more-hints-at-europas-subsurface-ocean"
    },
    {
      "title": "THEO concept mission: Testing the Habitability of Enceladus’s Ocean - ScienceDirect",
      "url": "https://www.sciencedirect.com/science/article/abs/pii/S027311771630240X"
    },
    {
      "title": "The Astrobiology Primer: An Outline of General Knowledge - Version 1, 2006",
      "url": "https://arxiv.org/pdf/astro-ph/0610926"
    },
    {
      "title": "Subsurface Water Ice Mapping on Mars: A Probabilistic Approach - IOPscience",
      "url": "https://iopscience.iop.org/article/10.3847/PSJ/ae8904"
    },
    {
      "title": "Radar evidence of subglacial liquid water on Mars",
      "url": "https://www.science.org/doi/10.1126/science.aar7268"
    },
    {
      "title": "Long-awaited review reveals journey of water from interstellar clouds to habitable worlds",
      "url": "https://phys.org/news/2021-04-long-awaited-reveals-journey-interstellar-clouds.html"
    },
    {
      "title": "Water and the interior structure of terrestrial planets and icy bodies",
      "url": "https://arxiv.org/pdf/1712.07539"
    },
    {
      "title": "The Martian mid-latitude subsurface ice is the remnant of a past ice sheet",
      "url": "https://www.nature.com/articles/s43247-026-03418-x"
    },
    {
      "title": "Classical element",
      "url": "https://en.wikipedia.org/wiki/Classical_element"
    },
    {
      "title": "Philosophy of matter",
      "url": "https://en.wikipedia.org/wiki/Philosophy_of_matter"
    },
    {
      "title": "Water (classical element)",
      "url": "https://en.wikipedia.org/wiki/Water_(classical_element)"
    },
    {
      "title": "The four element theory_Baiduwiki",
      "url": "https://baike.baidu.com/en/item/The%20four%20element%20theory/1415945"
    },
    {
      "title": "2.1: Discovery of Hydrogen - Chemistry LibreTexts",
      "url": "https://chem.libretexts.org/Bookshelves/Inorganic_Chemistry/Chemistry_of_the_Main_Group_Elements_(Barron)/02:_Hydrogen/2.01:_Discovery_of_Hydrogen"
    },
    {
      "title": "Cavendish",
      "url": "https://www.mprl-series.mpg.de/studies/7/17/index.html"
    },
    {
      "title": "Discovery of the Composition of Water",
      "url": "https://www.ebsco.com/research-starters/history/discovery-composition-water"
    },
    {
      "title": "Henry Cavendish",
      "url": "https://www.ebsco.com/research-starters/biography/henry-cavendish"
    },
    {
      "title": "Hydrogen",
      "url": "https://engines.egr.uh.edu/episode/1604"
    },
    {
      "title": "Antoine Lavoisier",
      "url": "https://en.wikipedia.org/wiki/Antoine_Lavoisier"
    },
    {
      "title": "Antoine Lavoisier",
      "url": "https://study.com/academy/lesson/antoine-lavoisier-atomic-theory-contribution.html"
    },
    {
      "title": "Dictionary of National Biography, 1885-1900/Cavendish, Henry (1731-1810) - Wikisource, the free online library",
      "url": "https://en.wikisource.org/wiki/Dictionary_of_National_Biography,_1885-1900/Cavendish,_Henry_(1731-1810)"
    },
    {
      "title": "Henry Cavendish",
      "url": "https://www.britannica.com/biography/Henry-Cavendish"
    },
    {
      "title": "Henry Cavendish",
      "url": "https://en.wikipedia.org/wiki/Henry_Cavendish"
    },
    {
      "title": "Antoine Lavoisier - Biography, Facts and Pictures",
      "url": "https://www.famousscientists.org/antoine-lavoisier/"
    },
    {
      "title": "Litre",
      "url": "https://en.wikipedia.org/wiki/Litre"
    },
    {
      "title": "Grave (unit)",
      "url": "https://en.wikipedia.org/wiki/Grave_(unit)"
    },
    {
      "title": "Kilogram",
      "url": "https://en.wikipedia.org/wiki/Kilogram"
    },
    {
      "title": "Kelvin Scale - an overview",
      "url": "https://www.sciencedirect.com/topics/engineering/kelvin-scale"
    },
    {
      "title": "Triple point",
      "url": "https://en.wikipedia.org/wiki/Triple_point"
    },
    {
      "title": "FAQs About Water and Steam",
      "url": "https://iapws.org/faq1/temper.html"
    },
    {
      "title": "Triple point water cell with storage volume for improved long term performance while retaining durability and ease of use",
      "url": "https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/10768056"
    },
    {
      "title": "What Is the Triple Point of Water?",
      "url": "https://www.fluke.com/en-us/learn/blog/calibration/what-is-triple-point-of-water"
    },
    {
      "title": "Vienna Standard Mean Ocean Water",
      "url": "https://en.wikipedia.org/wiki/Vienna_Standard_Mean_Ocean_Water"
    },
    {
      "title": "VSMOW2 Vienna Standard Mean Ocean Water 2 (Hydrogen and Oxygen Isotopes in Water) Sigma-Aldrich",
      "url": "https://www.sigmaaldrich.com/US/en/product/sial/nist8535a"
    },
    {
      "title": "Vienna_Standard_Mean_Ocean_Water",
      "url": "https://www.chemeurope.com/en/encyclopedia/Vienna_Standard_Mean_Ocean_Water.html"
    },
    {
      "title": "Guidelines for Drinking-water Quality – Frequently Asked Questions",
      "url": "https://www.who.int/news-room/questions-and-answers/item/guidelines-for-drinking-water-quality---frequently-asked-questions"
    },
    {
      "title": "World Health Organization Sustainable Development and Healthy Environments",
      "url": "https://www.ircwash.org/sites/default/files/243-02WH-17308.pdf"
    },
    {
      "title": "WHO unveils third addendum to Guidelines for drinking-water quality",
      "url": "https://www.who.int/news/item/18-06-2026-who-unveils-third-addendum-to-guidelines-for-drinking-water-quality"
    },
    {
      "title": "Water supply system - Coagulation, Flocculation",
      "url": "https://www.britannica.com/technology/water-supply-system/Coagulation-and-flocculation"
    },
    {
      "title": "Surface Water Treatment - Water Education Foundation",
      "url": "https://www.watereducation.org/aquapedia/surface-water-treatment"
    },
    {
      "title": "Technology Screening Matrix",
      "url": "https://frtr.gov/matrix/Disinfection/"
    },
    {
      "title": "Drinking Water Treatment Process",
      "url": "https://www.ntmwd.com/250/Drinking-Water-Treatment-Process"
    },
    {
      "title": "Share using safely managed drinking water",
      "url": "https://ourworldindata.org/grapher/proportion-using-safely-managed-drinking-water"
    },
    {
      "title": "WHO/UNICEF Joint Monitoring Programme for Water Supply, Sanitation and Hygiene",
      "url": "https://cdn.who.int/media/docs/default-source/wash-documents/wash-coverage/jmp/jmp-2025-wash-households-lowres-launch.pdf"
    },
    {
      "title": "Bridging the Gap: Key Insights from the JMP 2025 WASH Report",
      "url": "https://en.vikaspedia.in/viewcontent/wash/niwas-vartika/bridging-the-gap-key-insights-from-the-jmp-2025-wash-report?lgn=en"
    },
    {
      "title": "Guidelines for drinking-water quality: fourth edition incorporating the first and second addenda",
      "url": "https://www.who.int/publications/i/item/9789240045064"
    },
    {
      "title": "Guidelines for Drinking-water Quality FOURTH EDITION",
      "url": "https://preparecenter.org/wp-content/uploads/2021/03/WHO-Guidance-drinking-water-4ed.pdf"
    },
    {
      "title": "New Joint Monitoring Program progress report published:",
      "url": "https://www.waterdiplomat.org/story/2025/09/new-joint-monitoring-program-progress-report-published"
    },
    {
      "title": "Agricultural water management",
      "url": "https://www.fao.org/land-water/water/agricultural-water-management/water-use-efficiency/en"
    },
    {
      "title": "Make every drop count: An inclusive, integrated and innovative approach to water scarcity is critical",
      "url": "https://www.fao.org/newsroom/detail/FAO-water-scarcity-agriculture-environment/en"
    },
    {
      "title": "Statistics",
      "url": "https://www.unesco.org/reports/wwdr/en/2024/s"
    },
    {
      "title": "FAO: 2025 AQUASTAT Water Data",
      "url": "https://www.unwater.org/news/fao-2025-aquastat-water-data"
    },
    {
      "title": "UN sounds alarm over rising demands on water resources as scarcity increases",
      "url": "https://news.un.org/en/story/2025/12/1166582"
    },
    {
      "title": "Fresh Water Users",
      "url": "https://www.voronoiapp.com/natural-resources/Fresh-Water-Users-4610"
    },
    {
      "title": "Cooling water use in thermoelectric power generation and its associated challenges for addressing water-energy nexus - ScienceDirect",
      "url": "https://www.sciencedirect.com/science/article/pii/S2588912517300085"
    },
    {
      "title": "Thermoelectric Power and Water Collide, According to UCS",
      "url": "https://watercalculator.org/news/articles/power-and-water-collide/"
    },
    {
      "title": "U.S. Energy Information Administration logo",
      "url": "https://www.eia.gov/todayinenergy/detail.php?id=37453"
    },
    {
      "title": "Withdrawal and Consumption of Water by Thermoelectric ...",
      "url": "https://pubs.usgs.gov/sir/2019/5103/sir20195103.pdf"
    },
    {
      "title": "thermoelectric power water use",
      "url": "https://www.usgs.gov/mission-areas/water-resources/science/thermoelectric-power-water-use"
    },
    {
      "title": "Analysis of Reservoir‐Based Hydroelectric versus Run‐of‐River",
      "url": "https://landresources.montana.edu/archives/capstone/2014_Capstone_Hydro.pdf"
    },
    {
      "title": "Neo-hydroelectric power system",
      "url": "https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/10487795"
    },
    {
      "title": "Estimating daily run-of-river hydropower generation from open hydrometeorological data: Limits of hydrology-based modelling - ScienceDirect",
      "url": "https://www.sciencedirect.com/science/article/pii/S0960148126012590"
    },
    {
      "title": "Adaptive (re)operations facilitate environmental flow maintenance downstream of multi-purpose reservoirs",
      "url": "https://arxiv.org/pdf/2404.18535"
    },
    {
      "title": "The current status of water resources for agriculture",
      "url": "https://www.fao.org/3/cd7488en/online/state-of-the-worlds-land-and-water-resources-for-food-and-agriculture-2025-2025/scenarios-offer-insights-assumptions.html"
    },
    {
      "title": "Understand Hydropower",
      "url": "https://understand-energy.stanford.edu/news/understand-hydropower"
    },
    {
      "title": "Impacts of Cooling Water Shortage on Power System ...",
      "url": "https://www.osti.gov/pages/servlets/purl/2587305"
    },
    {
      "title": "Groundwater Extraction - an overview",
      "url": "https://www.sciencedirect.com/topics/agricultural-and-biological-sciences/groundwater-extraction"
    },
    {
      "title": "Physical Water Scarcity - an overview",
      "url": "https://www.sciencedirect.com/topics/agricultural-and-biological-sciences/physical-water-scarcity"
    },
    {
      "title": "World Enters “Era of Global Water Bankruptcy”: UN Scientists Formally Define New Post-Crisis Reality for Billions",
      "url": "https://unu.edu/inweh/news/world-enters-era-of-global-water-bankruptcy"
    },
    {
      "title": "graphsearch.epfl.ch",
      "url": "https://graphsearch.epfl.ch/en/publication/311458/concepts"
    },
    {
      "title": "Nutrients, eutrophication and harmful algal blooms along the freshwater to marine continuum - Wurtsbaugh - 2019 - WIREs Water - Wiley Online Library",
      "url": "https://wires.onlinelibrary.wiley.com/doi/10.1002/wat2.1373"
    },
    {
      "title": "Algal Blooms in Streams, Lakes, and Coastal Waters - Advanced Science News",
      "url": "https://www.advancedsciencenews.com/eutrophication-and-harmful-algal-blooms-in-streams-lakes-and-coastal-waters/"
    },
    {
      "title": "Freshwater biodiversity loss has been out of sight, out of mind - McGill Reporter",
      "url": "https://reporter.mcgill.ca/freshwater-biodiversity-loss-has-been-out-of-sight-out-of-mind/"
    },
    {
      "title": "Water extraction",
      "url": "https://en.wikipedia.org/wiki/Water_extraction"
    },
    {
      "title": "Freshwater Biodiversity",
      "url": "https://wwf.panda.org/discover/our_focus/freshwater_practice/freshwater_biodiversity_222/"
    },
    {
      "title": "Bending the Curve of Global Freshwater Biodiversity Loss: An Emergency Recovery Plan - PMC",
      "url": "https://pmc.ncbi.nlm.nih.gov/articles/PMC7138689/"
    },
    {
      "title": "Reassessing the projections of the World Water Development Report",
      "url": "https://www.nature.com/articles/s41545-019-0039-9"
    },
    {
      "title": "What is eutrophication?",
      "url": "https://oceanservice.noaa.gov/facts/eutrophication.html"
    },
    {
      "title": "Climate change impact on flood and extreme precipitation increases with water availability",
      "url": "https://www.nature.com/articles/s41598-020-70816-2"
    },
    {
      "title": "The water cycle is intensifying as the climate warms, IPCC report warns",
      "url": "https://theconversation.com/the-water-cycle-is-intensifying-as-the-climate-warms-ipcc-report-warns-that-means-more-intense-storms-and-flooding-165590"
    },
    {
      "title": "MetLink - Royal Meteorological Society The Changing Water Cycle -",
      "url": "https://www.metlink.org/resource/the-changing-water-cycle/"
    },
    {
      "title": "How does climate change affect precipitation?",
      "url": "https://gpm.nasa.gov/node?page=499"
    },
    {
      "title": "Climate change and its impacts on the water cycle; how can it increase both droughts and heavy downpours? - Science Feedback",
      "url": "https://science.feedback.org/climate-change-impacts-on-the-water-cycle-how-can-it-increase-both-droughts-and-heavy-downpours/"
    },
    {
      "title": "Climate Change: Global Sea Level",
      "url": "https://www.climate.gov/news-features/understanding-climate/climate-change-global-sea-level"
    },
    {
      "title": "NASA-led study reveals the causes of sea level rise since 1900",
      "url": "https://sealevel.nasa.gov/news/191/nasa-led-study-reveals-the-causes-of-sea-level-rise-since-1900/"
    },
    {
      "title": "Ice Melt",
      "url": "https://sealevel.nasa.gov/understanding-sea-level/global-sea-level/ice-melt/"
    },
    {
      "title": "Water vapor and lapse rate feedbacks in the climate system",
      "url": "https://link.aps.org/doi/10.1103/RevModPhys.93.045002"
    },
    {
      "title": "Stratospheric water vapor feedback",
      "url": "https://www.pnas.org/doi/10.1073/pnas.1310344110"
    },
    {
      "title": "The global warming potential of near-surface emitted water vapour - IOPscience",
      "url": "https://iopscience.iop.org/article/10.1088/1748-9326/aae018"
    },
    {
      "title": "Floods, drought and how climate change affects the water cycle",
      "url": "https://www.activesustainability.com/water/climate-change-water-cycle"
    },
    {
      "title": "Water Vapour Feedback: The Amplifier of Global Warming • Climate Change Academy",
      "url": "https://climatechange.academy/introduction-to-climate-change/water-vapor-feedback-global-warming/"
    },
    {
      "title": "Water Seems to Have Not One, But Two Distinct Structures in Its Liquid State : ScienceAlert",
      "url": "https://www.sciencealert.com/water-seems-to-have-not-one-but-two-distinct-structures-in-its-liquid-state"
    },
    {
      "title": "Distinct signature of two local structural motifs of liquid water in the scattering function",
      "url": "https://arxiv.org/pdf/1908.08102"
    },
    {
      "title": "Does the State of the Art Knowledge on Water Structure Require Thinking About a New Thermodynamic Framework for Aqueous Solutions?",
      "url": "https://doi.org/10.3390/colloids10040060"
    },
    {
      "title": "Structure of liquid water: Is the two-state model operative? - ScienceDirect",
      "url": "https://www.sciencedirect.com/science/article/abs/pii/S0009261411004647"
    },
    {
      "title": "Water: A Tale of Two Liquids",
      "url": "https://pubs.acs.org/doi/10.1021/acs.chemrev.5b00750"
    },
    {
      "title": "New experiments confirm supercooled water’s critical point",
      "url": "https://www.sciencenews.org/article/water-critical-point-supercooled-liquid"
    },
    {
      "title": "The war over supercooled water - Physics Today",
      "url": "https://pubs.aip.org/physicstoday/online/4628/The-war-over-supercooled-water"
    },
    {
      "title": "Experiment closes in on a second critical point of water - Physics Today",
      "url": "https://physicstoday.aip.org/news/experiment-closes-in-on-a-second-critical-point-of-water"
    },
    {
      "title": "Second critical point appears in two models of water",
      "url": "https://physicsworld.com/a/second-critical-point-appears-in-two-models-of-water/"
    },
    {
      "title": "Second critical point in two realistic models of water",
      "url": "https://www.science.org/doi/10.1126/science.abb9796"
    },
    {
      "title": "Does Water Have a Second Critical Point? - ChemistryViews",
      "url": "https://www.chemistryviews.org/details/news/11254746/Does_Water_Have_a_Second_Critical_Point/"
    },
    {
      "title": "Pressure Dependence of Fragile-to-Strong Transition and a Possible Second Critical Point in Supercooled Confined Water",
      "url": "https://arxiv.org/pdf/cond-mat/0508383"
    },
    {
      "title": "Interfaces govern the structure of angstrom-scale confined water solutions",
      "url": "https://www.nature.com/articles/s41467-025-62625-w"
    },
    {
      "title": "Water properties under nano-scale confinement",
      "url": "https://www.nature.com/articles/s41598-019-44651-z"
    },
    {
      "title": "Ultrasonic Study of Water Adsorbed in Nanoporous Glasses",
      "url": "https://arxiv.org/pdf/2303.12193"
    }
  ],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}