{
  "id": "van-der-waals-equation",
  "title": "Van der Waals Equation",
  "lang": "en",
  "source_lang": "en",
  "summary": "The van der Waals equation models real fluids by accounting for molecular size and attraction, providing a simple description of gas–liquid coexistence and critical behavior.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "van der Waals equation of state",
    "van der Waals gas equation"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/van-der-waals-equation/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/van-der-waals-equation/",
      "json": "https://aiwiki.page/zh/van-der-waals-equation.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The van der Waals equation is an equation of state that relates the pressure, volume, temperature, and amount of a fluid while approximately accounting for molecular size and intermolecular attraction. Introduced by the Dutch physicist Johannes Diderik van der Waals in 1873, it extends the ideal gas law and explains qualitatively how gases can condense into liquids. Although insufficiently accurate for many quantitative applications, it remains a foundational model in thermodynamics and the theory of fluids."
    },
    {
      "heading": "Mathematical form",
      "text": "For \\(n\\) moles of a pure substance, the equation is\n\n\\[\\left(p+a\\frac{n^2}{V^2}\\right)(V-nb)=nRT,\\]\n\nor, equivalently,\n\n\\[p=\\frac{nRT}{V-nb}-a\\frac{n^2}{V^2}.\\]\n\nHere:\n\n- \\(p\\) is pressure;\n- \\(V\\) is the total volume;\n- \\(n\\) is the amount of substance;\n- \\(T\\) is absolute temperature;\n- \\(R\\) is the molar gas constant;\n- \\(a\\) represents the strength of the attractive-interaction correction;\n- \\(b\\) represents the excluded-volume correction per mole.\n\nUsing the molar volume \\(v=V/n\\), the equation becomes\n\n\\[p=\\frac{RT}{v-b}-\\frac{a}{v^2}.\\]\n\nThe physically intended domain is \\(v>b\\). In SI units, \\(a\\) has units of \\(\\mathrm{Pa\\,m^6\\,mol^{-2}}\\), and \\(b\\) has units of \\(\\mathrm{m^3\\,mol^{-1}}\\). Both are normally treated as substance-specific, positive constants in the original model.\n\nSetting \\(a=b=0\\) recovers the ideal gas law exactly. For nonzero constants, ideal-gas behavior is approached at sufficiently low density, where \\(b/v\\ll1\\) and \\(a/(RTv)\\ll1\\)."
    },
    {
      "heading": "Physical interpretation",
      "text": "Molecular size and excluded volume\n\nAn ideal gas treats its particles as having negligible size. Real molecules cannot overlap freely, so not all the container volume is available to their centers. The substitution\n\n\\[V\\longrightarrow V-nb\\]\n\napproximates this restriction. At a given temperature and volume, it raises the pressure relative to the ideal-gas prediction.\n\nThe parameter \\(b\\) is not simply the physical volume occupied by one mole of molecules. In a dilute hard-sphere interpretation, it is four times the sum of the individual molecular volumes per mole. This factor arises from the volume excluded to the center of one sphere by another, with the pair-counting factor included. For real molecules, \\(b\\) is an effective parameter rather than an exact geometrical volume.\n\nIntermolecular attraction\n\nAttractive forces reduce the pressure exerted by a fluid compared with a hypothetical fluid having the same excluded-volume effects but no attraction. In the van der Waals approximation, this reduction is\n\n\\[p_{\\mathrm{attraction}}=-\\frac{a}{v^2}.\\]\n\nThe inverse-square dependence on molar volume reflects an approximate dependence on the square of molecular number density: the number of interacting pairs per unit volume increases roughly with density squared.\n\nThis is a mean-field approximation. Each molecule is treated as experiencing an average attraction from its surroundings, rather than the detailed, fluctuating forces of individual neighbors. The parameter \\(a\\) represents the combined attractive contribution; it does not resolve the separate microscopic mechanisms grouped under van der Waals forces.\n\nThe two corrections compete. Attraction tends to lower pressure, while excluded volume raises it. Consequently, departures from ideal-gas behavior need not have the same sign at all temperatures and densities."
    },
    {
      "heading": "Isotherms and the critical point",
      "text": "An isotherm is a pressure–volume curve at fixed temperature. The van der Waals equation predicts three qualitatively different regimes:\n\n- Above the critical temperature, pressure decreases continuously as molar volume increases, without a gas–liquid coexistence interval.\n- At the critical temperature, the isotherm has a horizontal inflection point.\n- Below the critical temperature, the mathematical curve contains a loop with local extrema.\n\nAt the critical point,\n\n\\[\\left(\\frac{\\partial p}{\\partial v}\\right)_T=0, \\qquad \\left(\\frac{\\partial^2p}{\\partial v^2}\\right)_T=0.\\]\n\nFor the van der Waals equation,\n\n\\[\\left(\\frac{\\partial p}{\\partial v}\\right)_T =-\\frac{RT}{(v-b)^2}+\\frac{2a}{v^3},\\]\n\n\\[\\left(\\frac{\\partial^2p}{\\partial v^2}\\right)_T =\\frac{2RT}{(v-b)^3}-\\frac{6a}{v^4}.\\]\n\nSolving these conditions gives\n\n\\[v_c=3b, \\qquad T_c=\\frac{8a}{27Rb}, \\qquad p_c=\\frac{a}{27b^2}.\\]\n\nConversely, the parameters can be estimated from measured critical temperature and pressure:\n\n\\[a=\\frac{27R^2T_c^2}{64p_c}, \\qquad b=\\frac{RT_c}{8p_c}.\\]\n\nThis procedure fits \\(T_c\\) and \\(p_c\\), but it does not generally reproduce the measured critical molar volume.\n\nThe compressibility factor is\n\n\\[Z=\\frac{pv}{RT}.\\]\n\nThe model predicts the universal critical value\n\n\\[Z_c=\\frac{p_cv_c}{RT_c}=\\frac{3}{8}.\\]\n\nReal substances do not all share this value, providing a direct indication of the model’s quantitative limitations."
    },
    {
      "heading": "Liquid–vapor coexistence and Maxwell construction",
      "text": "For temperatures below \\(T_c\\), part of the van der Waals loop has\n\n\\[\\left(\\frac{\\partial p}{\\partial v}\\right)_T>0.\\]\n\nThis corresponds to negative isothermal compressibility,\n\n\\[\\kappa_T=-\\frac{1}{v} \\left(\\frac{\\partial v}{\\partial p}\\right)_T,\\]\n\nand is mechanically unstable. A homogeneous equilibrium fluid cannot occupy this branch.\n\nInstead, over a range of average molar volumes, the stable equilibrium state separates into liquid and vapor. At a fixed temperature, both phases have the same saturation pressure \\(p_{\\mathrm{sat}}\\). Their relative amounts change as the total volume changes.\n\nThe Maxwell equal-area construction replaces the loop by a horizontal coexistence line chosen so that\n\n\\[\\int_{v_l}^{v_g} \\left[p(v,T)-p_{\\mathrm{sat}}\\right]\\,dv=0,\\]\n\nwhere \\(v_l\\) and \\(v_g\\) are the coexisting liquid and vapor molar volumes. Both endpoints also satisfy\n\n\\[p(v_l,T)=p(v_g,T)=p_{\\mathrm{sat}}.\\]\n\nThe equal-area condition enforces equality of the chemical potentials of the two phases, as required by thermodynamic equilibrium. For a pure substance, the chemical potential is the molar Gibbs free energy.\n\nThe subcritical curve also contains metastable portions: superheated liquid and supersaturated vapor can persist temporarily before nucleation initiates a phase transition. Their limiting points, where the isothermal slope vanishes, define the spinodal. The coexistence boundary and spinodal are distinct: a phase can be mechanically stable against small disturbances while still having a higher free energy than a phase-separated state.\n\nThe coexistence line is therefore not a direct segment of the original algebraic isotherm. It is an equilibrium construction applied to the model."
    },
    {
      "heading": "Reduced variables and corresponding states",
      "text": "Define reduced pressure, volume, and temperature by\n\n\\[p_r=\\frac{p}{p_c}, \\qquad v_r=\\frac{v}{v_c}, \\qquad T_r=\\frac{T}{T_c}.\\]\n\nSubstitution yields\n\n\\[\\left(p_r+\\frac{3}{v_r^2}\\right)(3v_r-1)=8T_r,\\]\n\nor\n\n\\[p_r=\\frac{8T_r}{3v_r-1}-\\frac{3}{v_r^2}.\\]\n\nThe parameters \\(a\\) and \\(b\\) disappear. Thus all van der Waals fluids obey the same equation when expressed in reduced variables.\n\nThis is a simple expression of the law of corresponding states: fluids compared at equivalent reduced conditions may exhibit similar behavior. Real fluids follow this principle only approximately. Molecular shape, polarity, association, and other interaction differences prevent exact two-parameter correspondence."
    },
    {
      "heading": "Low-density expansion",
      "text": "At large molar volume,\n\n\\[\\frac{1}{v-b} =\\frac{1}{v} \\left(1+\\frac{b}{v}+\\frac{b^2}{v^2}+\\cdots\\right).\\]\n\nThe compressibility factor therefore becomes\n\n\\[Z =1+\\frac{b-a/(RT)}{v} +\\frac{b^2}{v^2} +\\frac{b^3}{v^3}+\\cdots.\\]\n\nComparing this expression with the virial equation of state,\n\n\\[Z=1+\\frac{B_2(T)}{v}+\\frac{B_3(T)}{v^2}+\\cdots,\\]\n\ngives\n\n\\[B_2(T)=b-\\frac{a}{RT}, \\qquad B_3(T)=b^2.\\]\n\nThe model’s Boyle temperature, where the second virial coefficient vanishes, is\n\n\\[T_B=\\frac{a}{Rb}.\\]\n\nAt this temperature, attractive and excluded-volume contributions cancel to first order in density. The fluid is not exactly ideal, because higher-order terms remain.\n\nThe prediction that \\(B_3\\) and all higher virial coefficients are temperature independent is another simplification that does not hold generally for real fluids."
    },
    {
      "heading": "Energy and thermodynamic completeness",
      "text": "An equation relating pressure, temperature, and volume does not by itself completely specify a fluid’s thermal properties. An additional caloric relation, such as a heat-capacity model, is needed.\n\nNevertheless, a thermodynamic identity constrains the volume dependence of the molar internal energy \\(u\\):\n\n\\[\\left(\\frac{\\partial u}{\\partial v}\\right)_T = T\\left(\\frac{\\partial p}{\\partial T}\\right)_v-p.\\]\n\nFor constant \\(a\\) and \\(b\\), the van der Waals equation gives\n\n\\[\\left(\\frac{\\partial u}{\\partial v}\\right)_T=\\frac{a}{v^2},\\]\n\nso that\n\n\\[u(T,v)=u_0(T)-\\frac{a}{v}.\\]\n\nThe function \\(u_0(T)\\) must be supplied separately. The negative term represents the reduction in energy associated with attractive interactions.\n\nWithin this model, the molar constant-volume heat capacity depends only on temperature:\n\n\\[c_v=\\left(\\frac{\\partial u}{\\partial T}\\right)_v =\\frac{du_0}{dT}.\\]\n\nFor a homogeneous state, a compatible molar Helmholtz free energy can be written as\n\n\\[f(T,v)=f_0(T)-RT\\ln\\left(\\frac{v-b}{v_*}\\right)-\\frac{a}{v},\\]\n\nwhere \\(v_*\\) is a fixed reference molar volume. This expression reproduces the pressure through \\(p=-(\\partial f/\\partial v)_T\\). In the coexistence region, equilibrium requires the phase-separated free-energy construction rather than the unstable homogeneous branch."
    },
    {
      "heading": "Historical significance, uses, and limitations",
      "text": "Van der Waals introduced the equation in his 1873 doctoral dissertation on the continuity of gaseous and liquid states. Its central achievement was to describe gas and liquid within a single mathematical framework, rather than treating them as fundamentally separate kinds of matter. He received the 1910 Nobel Prize in Physics for his work on the equation of state of gases and liquids.\n\nThe equation remains useful for:\n\n- illustrating how molecular size and attraction modify ideal-gas behavior;\n- introducing critical points, coexistence, and metastability;\n- developing corresponding-states arguments;\n- providing a simple reference model in statistical mechanics;\n- explaining the structure of more sophisticated cubic equations of state.\n\nIts main limitations are quantitative. The excluded-volume term is too simple for dense fluids, and a constant \\(a\\) does not adequately represent the temperature dependence of real intermolecular effects. Strongly associating fluids, including water, are especially poorly represented by a basic two-parameter model.\n\nNear the critical point, the equation gives mean-field behavior and neglects important density fluctuations. For example, it predicts that the difference between coexisting liquid and vapor densities vanishes as \\((T_c-T)^{1/2}\\), whereas ordinary three-dimensional fluids sufficiently close to criticality exhibit a different exponent.\n\nThe equation also has no independent description of solid phases. Modern engineering calculations commonly use more accurate cubic equations, multiparameter equations, or experimentally fitted property models when reliable liquid densities, saturation pressures, or near-critical properties are required."
    }
  ],
  "links": [
    "equation-of-state",
    "ideal-gas",
    "thermodynamics",
    "pressure",
    "amount-of-substance",
    "temperature",
    "gas-constant",
    "international-system-of-units",
    "molecule",
    "van-der-waals-forces",
    "critical-point",
    "compressibility-factor",
    "chemical-potential",
    "thermodynamic-equilibrium",
    "gibbs-free-energy",
    "phase-transition",
    "internal-energy",
    "heat-capacity",
    "helmholtz-free-energy",
    "nobel-prize-in-physics",
    "statistical-mechanics",
    "water"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}