{
  "id": "vacuum-distillation",
  "title": "Vacuum Distillation",
  "lang": "en",
  "source_lang": "en",
  "summary": "Vacuum distillation separates substances at reduced pressure, lowering their boiling temperatures and enabling the processing of high-boiling or heat-sensitive materials.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Reduced-pressure distillation",
    "Distillation under vacuum"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/vacuum-distillation/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/vacuum-distillation/",
      "json": "https://aiwiki.page/zh/vacuum-distillation.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Vacuum distillation is distillation performed at a pressure below atmospheric pressure. Reducing the pressure lowers the temperature at which a liquid boils, allowing volatile components to be vaporized and subsequently condensed under conditions that may limit thermal decomposition. The technique is used in laboratory purification, solvent recovery, petroleum refining, and the processing of high-boiling or heat-sensitive substances. It changes the operating conditions of distillation rather than introducing a fundamentally different separation mechanism."
    },
    {
      "heading": "Physical principles",
      "text": "Pressure and boiling temperature\n\nA pure liquid boils when its saturation vapor pressure equals the local pressure acting on it. Because vapor pressure generally increases with temperature, lowering the surrounding pressure lowers the boiling point. For example, water boils at approximately \\(100\\,^\\circ\\mathrm{C}\\) at an absolute pressure of \\(101.3\\,\\mathrm{kPa}\\), but at approximately \\(60\\,^\\circ\\mathrm{C}\\) at \\(20\\,\\mathrm{kPa}\\).\n\nThe pressure dependence of saturation temperature can be approximated using the integrated Clausius–Clapeyron relation:\n\n\\[\\ln\\!\\left(\\frac{P_2}{P_1}\\right) = -\\frac{\\Delta H_{\\mathrm{vap}}}{R} \\left(\\frac{1}{T_2}-\\frac{1}{T_1}\\right),\\]\n\nwhere \\(P_1\\) and \\(P_2\\) are saturation pressures at absolute temperatures \\(T_1\\) and \\(T_2\\), \\(R\\) is the gas constant, and \\(\\Delta H_{\\mathrm{vap}}\\) is the molar enthalpy of vaporization. This approximation treats the vapor as an ideal gas, neglects the liquid volume relative to the vapor volume, and assumes that the enthalpy of vaporization is approximately constant over the temperature interval.\n\nVacuum distillation therefore does not require a substance to reach its normal boiling point—the boiling temperature at standard atmospheric pressure. It still requires energy for heating and vaporization.\n\nSeparation of mixtures\n\nMixture separation depends on vapor–liquid equilibrium. At low pressures, when the vapor behaves nearly ideally, a component may be described approximately by\n\n\\[y_iP=x_i\\gamma_iP_i^{\\mathrm{sat}}(T),\\]\n\nwhere \\(x_i\\) and \\(y_i\\) are its mole fractions in the liquid and vapor, \\(\\gamma_i\\) is its liquid-phase activity coefficient, and \\(P_i^{\\mathrm{sat}}\\) is its pure-component saturation vapor pressure.\n\nThe vapor is generally enriched in components that are more volatile under the operating conditions. Collecting and condensing it produces a distillate whose composition differs from that of the remaining liquid.\n\nReduced pressure does not automatically improve separation. Relative volatility changes with pressure, temperature, and composition, so separation may become easier or harder. Vacuum operation also does not necessarily eliminate an azeotrope, a mixture whose vapor and liquid compositions coincide at a particular pressure and composition. Some azeotropes shift sufficiently with pressure to permit pressure-swing separation, but this is a mixture-specific property."
    },
    {
      "heading": "Equipment and process arrangements",
      "text": "A vacuum-distillation system typically includes:\n\n- An evaporator or reboiler, which supplies heat to the liquid.\n- A vapor passage or fractionating column, which directs vapor toward the condenser and may provide repeated vapor–liquid contact.\n- A condenser and receiver, which liquefy and collect the vapor.\n- A vacuum source, such as a vacuum pump or steam ejector.\n- Pressure measurement and control, which establish and maintain the operating pressure.\n- Traps or protective condensers, which reduce the amount of vapor and entrained material reaching the vacuum equipment.\n\nPressure is normally specified as absolute pressure. A statement such as “a vacuum of 20 kPa” is ambiguous unless it specifies whether this means 20 kPa absolute or a pressure reduction of 20 kPa relative to the atmosphere.\n\nThe pressure at the evaporation surface can differ from that measured near the pump because flowing vapor encounters resistance. Leaks, vapor production, equipment geometry, and condenser performance all affect the pressure that can be maintained during operation.\n\nSimple and fractional vacuum distillation\n\nSimple vacuum distillation provides essentially one vaporization-and-condensation stage. It is useful for separating a volatile material from nonvolatile impurities or for mixtures with sufficiently different volatilities.\n\nFractional distillation under vacuum uses packing or trays to create repeated contact between rising vapor and descending liquid. Returning part of the condensate as reflux improves separation, although additional vaporization and condensation increase energy demand.\n\nLow pressure drop is particularly important in vacuum columns: resistance through the column raises the pressure, and therefore the boiling temperature, in the lower sections. Packing is often selected to limit this pressure drop.\n\nRotary evaporation\n\nA rotary evaporator combines reduced pressure with rotation of a heated flask. Rotation spreads the liquid over a larger surface and promotes evaporation. These instruments are widely used to remove a solvent from less volatile products.\n\nAlthough solvent vapor is condensed and collected, a standard rotary evaporator is generally intended for solvent removal rather than high-resolution fractionation of closely boiling compounds.\n\nShort-path and thin-film systems\n\nIn short-path distillation, the condenser is positioned close to the evaporation surface. The short vapor path reduces pressure losses and can enable operation at very low pressures.\n\nThin-film and wiped-film evaporators spread the feed into a thin layer, often using mechanical wipers. This improves heat transfer and reduces the time spent at elevated temperature, which is useful for viscous or thermally sensitive materials.\n\nMolecular distillation is a specialized low-pressure regime in which the evaporator–condenser spacing is comparable to or smaller than the molecular mean free path. Vapor molecules then experience relatively few intermolecular collisions while crossing the gap. Not every short-path apparatus operates in this regime, and molecular distillation is not adequately described as ordinary equilibrium-stage fractionation."
    },
    {
      "heading": "Applications",
      "text": "Petroleum refining\n\nIn petroleum refining, vacuum distillation processes the heavy liquid residue left after atmospheric distillation. At atmospheric pressure, vaporizing these heavy hydrocarbons would require temperatures that promote unwanted thermal cracking and coke formation.\n\nA vacuum column recovers high-boiling fractions at lower temperatures. Depending on the refinery configuration, these fractions become feedstocks for conversion processes or for lubricant production, while a heavier vacuum residue remains. Steam may also be introduced to lower hydrocarbon partial pressures and assist vaporization.\n\nChemical manufacturing and purification\n\nVacuum distillation is used to purify high-boiling organic compounds, recover solvents, and separate intermediates whose degradation becomes significant near their atmospheric boiling temperatures. It may operate batchwise, with composition changing over time, or continuously, with feed and product streams maintained during operation.\n\nIts usefulness depends on both volatility and thermal stability. A substance must have sufficient vapor pressure at a tolerable temperature to be recovered effectively. Lower pressure does not make all substances distillable; many ionic compounds, polymers, and biological macromolecules decompose before appreciable intact vaporization occurs.\n\nOils, fragrances, and other specialty products\n\nReduced-pressure and thin-film processes are used in the fractionation or purification of fatty acids, fragrance ingredients, and selected oil-derived products. Short residence times can be as important as low temperature because degradation depends on the duration of exposure as well as the temperature reached."
    },
    {
      "heading": "Operating limitations and hazards",
      "text": "Thermal degradation remains possible. The bulk boiling temperature may be reduced while heated surfaces remain considerably hotter. Poor mixing, high viscosity, and fouling can create local overheating.\n\nVapor volume increases as pressure falls. For a given molar flow and temperature, lower pressure produces a larger volumetric vapor flow. Columns, vapor lines, and condensers must accommodate this flow without excessive pressure loss or liquid entrainment.\n\nCondensation can become more demanding. Lower pressure generally lowers the condensation temperature as well as the boiling temperature. Some applications therefore require chilled coolant, refrigeration, or additional trapping.\n\nPressure control affects reproducibility. Changing pressure changes boiling temperature and vapor–liquid equilibrium. Reported boiling ranges are meaningful only when accompanied by the corresponding pressure; temperature alone is insufficient to identify a fraction.\n\nVacuum introduces mechanical and process hazards. Equipment must withstand the external pressure difference. Glass vessels can implode if damaged or unsuitable for vacuum service. Sudden boiling, foaming, and entrainment can carry liquid into receivers or vacuum lines. Air leakage may introduce oxygen into systems containing flammable vapors, while uncondensed vapors can contaminate pumps or their exhaust."
    },
    {
      "heading": "Energy use and process selection",
      "text": "Lower-temperature operation does not necessarily mean lower total energy consumption. Vaporization still requires latent heat, while vacuum generation, refrigeration, reflux, and pressure losses add operating costs. Conversely, the lower process temperature can permit lower-grade heat sources and reduce losses caused by decomposition.\n\nSelection of vacuum level therefore balances thermal stability, separation requirements, heat transfer, vapor-handling capacity, condensation temperature, and vacuum-system performance. The lowest achievable pressure is not necessarily the most effective operating pressure."
    }
  ],
  "links": [
    "distillation",
    "pressure",
    "vapor-pressure",
    "temperature",
    "water",
    "gas-constant",
    "enthalpy",
    "vapor-liquid-equilibrium",
    "activity-coefficient",
    "azeotrope",
    "fractional-distillation",
    "evaporation",
    "solvent",
    "petroleum-refining",
    "hydrocarbon",
    "viscosity",
    "latent-heat"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}