{
  "id": "type-i-superconductor",
  "title": "Type-I Superconductor",
  "lang": "en",
  "source_lang": "en",
  "summary": "A type-I superconductor expels magnetic flux below a single thermodynamic critical field and has positive interfacial energy between its normal and superconducting phases.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Type I superconductor",
    "first-kind superconductor"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/type-i-superconductor/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/type-i-superconductor/",
      "json": "https://aiwiki.page/zh/type-i-superconductor.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A type-I superconductor is a material whose bulk superconductivity is destroyed at a single thermodynamic critical magnetic field, \\(H_c\\), under ideal equilibrium conditions. Below its critical temperature and at sufficiently weak fields, it exhibits zero direct-current electrical resistance and expels magnetic flux from its interior through the Meissner effect. Its defining distinction from a type-II superconductor is the positive energy of an interface between normal and superconducting regions. This favors the formation of macroscopic normal domains rather than an equilibrium lattice of individual magnetic vortices."
    },
    {
      "heading": "Magnetic behavior and critical field",
      "text": "When a sufficiently large, simply connected type-I specimen is cooled below its critical temperature \\(T_c\\) in a weak applied field, screening electric currents develop near its surface. These currents make the magnetic induction \\(B\\) nearly zero in the bulk. The field penetrates only a thin surface region characterized by the magnetic penetration depth.\n\nThe Meissner effect distinguishes superconductivity from perfect electrical conductivity. A hypothetical perfect conductor would preserve its existing magnetic-flux distribution when its resistance vanished; a superconductor instead tends toward an equilibrium state that excludes magnetic flux.\n\nFor a long specimen aligned with an applied field, so that demagnetizing effects are negligible, increasing the field produces a transition from the Meissner state to the normal state at \\(H_c(T)\\). Above this field, bulk superconductivity is no longer thermodynamically favored.\n\nThe critical field decreases with increasing temperature and vanishes at \\(T_c\\). A useful empirical approximation for many conventional type-I materials is\n\n\\[H_c(T)\\approx H_c(0)\\left[1-\\left(\\frac{T}{T_c}\\right)^2\\right].\\]\n\nThis expression is not an exact universal law.\n\nIn the International System of Units, magnetic field strength \\(H\\) is measured in amperes per metre, whereas magnetic induction \\(B\\) is measured in teslas. Critical fields are often quoted as \\(\\mu_0H_c\\), in teslas, where \\(\\mu_0\\) is the vacuum permeability."
    },
    {
      "heading": "Thermodynamic interpretation",
      "text": "The critical field measures the condensation energy: the free-energy advantage of the superconducting state over the normal state in zero magnetic field. For free energies per unit volume, the relation is\n\n\\[f_n(T,0)-f_s(T,0)=\\frac{\\mu_0H_c^2(T)}{2},\\]\n\nwhere \\(f_n\\) and \\(f_s\\) are the zero-field Helmholtz free-energy densities of the normal and superconducting states.\n\nAt a given temperature, the energetic cost associated with excluding the applied field eventually offsets this condensation energy. At \\(H_c\\), the two phases have equal appropriate thermodynamic potentials.\n\nThe field-driven phase transition is generally first order below \\(T_c\\), involving a discontinuous change in magnetization and, at nonzero temperature, an entropy difference and associated latent heat. By contrast, the zero-field transition at \\(T_c\\) is continuous in the standard description: it has a discontinuity in heat capacity rather than latent heat.\n\nActual switching fields can differ from \\(H_c\\). Surface barriers, defects, and nucleation processes may allow metastable superconducting or normal states to persist beyond their equilibrium stability boundary. Such superheating and supercooling do not redefine the thermodynamic critical field."
    },
    {
      "heading": "Ginzburg–Landau criterion",
      "text": "Ginzburg–Landau theory describes superconductivity using a complex order parameter and two characteristic lengths:\n\n- Magnetic penetration depth, \\(\\lambda\\): the characteristic distance over which a magnetic field is screened.\n- Superconducting coherence length, \\(\\xi\\): the characteristic distance over which the order parameter recovers after a disturbance.\n\nTheir ratio is the Ginzburg–Landau parameter,\n\n\\[\\kappa=\\frac{\\lambda}{\\xi}.\\]\n\nIn the standard, local, single-component theory near \\(T_c\\),\n\n\\[\\kappa<\\frac{1}{\\sqrt{2}}\\]\n\ncorresponds to type-I behavior. For \\(\\kappa>1/\\sqrt{2}\\), the material is type II.\n\nThe distinction follows from the energy of an interface between normal and superconducting regions at the thermodynamic critical field. In a type-I material, this interfacial energy is positive, so creating many small normal regions is energetically costly. Larger domains with less total interface area are favored. In a type-II material, the corresponding interfacial energy is negative, allowing an equilibrium mixed state containing quantized magnetic vortices.\n\nThe numerical boundary is exact within the standard Ginzburg–Landau framework. More complicated descriptions, including multicomponent superconductivity and effects away from the theory’s usual regime near \\(T_c\\), can require a more detailed classification."
    },
    {
      "heading": "The intermediate state",
      "text": "A single thermodynamic critical field does not mean that every specimen switches uniformly from superconducting to normal at one value of the externally applied field.\n\nWhen a specimen significantly distorts the surrounding field, its local surface field can reach \\(H_c\\) while the applied field is still below \\(H_c\\). The material may then enter the intermediate state, in which normal and superconducting domains coexist. Magnetic flux passes through the normal regions, while the superconducting regions largely exclude it.\n\nFor an ideal ellipsoid with demagnetizing factor \\(N\\), negligible normal-state magnetic susceptibility, and negligible interface corrections, the intermediate-state interval is approximately\n\n\\[(1-N)H_c<H_a<H_c,\\]\n\nwhere \\(H_a\\) is the applied field strength. A long specimen parallel to the field has \\(N\\) close to zero and a narrow coexistence interval; a thin plate perpendicular to the field can have a much wider interval.\n\nDomain arrangements include alternating lamellae, normal tubes within superconducting material, and superconducting regions within a normal background. Their dimensions and shapes depend on interfacial energy, magnetostatic energy, sample geometry, defects, and magnetic history.\n\nThe intermediate state differs fundamentally from the mixed state of a type-II superconductor:\n\nFeature | Type-I intermediate state | Type-II mixed state\nFlux-bearing structures | Normal domains, often much larger than microscopic superconducting length scales | Quantized vortices\nFlux carried by each structure | Not generally restricted to one flux quantum per domain | Usually one flux quantum per vortex\nOrigin | Phase coexistence strongly influenced by demagnetizing fields | Stable vortex penetration between two critical fields\nNormal–superconducting interfacial energy | Positive | Negative in the standard Ginzburg–Landau description\n\nMultiply connected specimens can also retain magnetic flux in holes without requiring flux to penetrate the superconducting bulk. Such trapped flux is compatible with type-I superconductivity."
    },
    {
      "heading": "Materials and microscopic mechanism",
      "text": "Well-known bulk type-I superconductors include high-purity mercury, lead, tin, aluminum, indium, and zinc under ordinary conditions. Representative approximate values are:\n\nMaterial | Critical temperature \\(T_c\\) | Zero-temperature critical field \\(\\mu_0H_c(0)\\)\nAluminum | 1.2 K | 0.010 T\nTin | 3.7 K | 0.030 T\nMercury | 4.2 K | 0.041 T\nLead | 7.2 K | 0.080 T\n\nThese values characterize bulk materials; purity, strain, sample dimensions, and measurement conditions can affect observed behavior.\n\nMany familiar type-I materials are elemental metals, but “elemental” and “type I” are not equivalent categories. Niobium, for example, is an elemental type-II superconductor.\n\nFor conventional type-I superconductors, BCS theory explains superconductivity through the formation of Cooper pairs, commonly mediated by interactions between electrons and phonons. The pairs form a coherent many-electron state with an excitation gap.\n\nPairing mechanism and magnetic type are separate questions. Conventional electron–phonon superconductors can be either type I or type II. The classification depends on magnetic screening, spatial variation of the superconducting state, and interface energetics, not simply on what binds the pairs.\n\nDisorder and alloying can also alter the classification. In conventional materials, impurity scattering can modify the effective penetration depth and coherence length, often increasing \\(\\kappa\\). Consequently, a material that is type I in a clean bulk form may display type-II behavior after sufficient disorder or alloying. Thin films and mesoscopic specimens can exhibit additional geometry-dependent behavior that differs from the bulk classification."
    },
    {
      "heading": "Historical development and uses",
      "text": "Superconductivity was discovered in mercury by Heike Kamerlingh Onnes in 1911. In 1933, Walther Meissner and Robert Ochsenfeld demonstrated magnetic-flux expulsion, establishing that superconductivity was more than the disappearance of resistance. Lev Landau subsequently developed a theory of the intermediate state.\n\nGinzburg–Landau theory, introduced in 1950, provided the framework for distinguishing the two magnetic types. Alexei Abrikosov’s work in the 1950s established the vortex state characteristic of type-II superconductors.\n\nType-I materials remain important in fundamental studies of superconducting thermodynamics, magnetic screening, domain formation, and transitions between metastable states. Aluminum is also widely used in superconducting tunnel junctions and devices exploiting the Josephson effect, although the behavior of a thin-film device cannot be inferred solely from aluminum’s bulk type-I classification.\n\nTheir comparatively low critical fields limit the usefulness of type-I materials for high-field electromagnets. Most practical high-field superconducting magnets instead use type-II materials, which can remain superconducting while magnetic flux penetrates in vortex form."
    }
  ],
  "links": [
    "superconductivity",
    "magnetic-field",
    "electrical-resistance",
    "meissner-effect",
    "type-ii-superconductor",
    "electric-current",
    "temperature",
    "international-system-of-units",
    "helmholtz-free-energy",
    "phase-transition",
    "magnetization",
    "latent-heat",
    "heat-capacity",
    "ginzburg-landau-theory",
    "order-parameter",
    "magnetic-flux",
    "bcs-theory",
    "cooper-pair",
    "phonon",
    "thermodynamics",
    "josephson-effect"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}