{
  "id": "thermal-conduction",
  "title": "Thermal Conduction",
  "lang": "en",
  "source_lang": "en",
  "summary": "Thermal conduction transfers energy through microscopic interactions within matter or across contacting materials, usually in response to a temperature gradient.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Heat conduction",
    "Conductive heat transfer"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/thermal-conduction/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/thermal-conduction/",
      "json": "https://aiwiki.page/zh/thermal-conduction.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Thermal conduction is the transfer of heat through microscopic interactions within matter or between materials in contact, without requiring bulk movement of the material. In its familiar form, it carries energy from regions of higher temperature toward regions of lower temperature. A metal spoon warming in hot water, heat escaping through a building wall, and energy spreading away from an operating electronic component are everyday examples.\n\nConduction is one of the principal modes of heat transfer, alongside convection and thermal radiation. Its macroscopic description relates heat flow to temperature gradients and material properties; its microscopic explanation involves molecular motion, lattice vibrations, mobile electrons, and other energy carriers. The subject connects thermodynamics, materials science, engineering, and planetary science. Although classical conduction theory accurately describes many practical systems, interfaces, very small structures, and extremely short heating times can require descriptions beyond the usual diffusion model."
    },
    {
      "heading": "Historical development and physical meaning",
      "text": "Early studies of heat conduction preceded the modern understanding of heat as energy transfer. Eighteenth-century investigators could compare how rapidly different substances transmitted heating, but explanations often relied on caloric theory, which treated heat as a conserved fluid. Experiments on metal rods, cooling bodies, and temperature distributions nevertheless supplied useful observations independently of that interpretation. The eventual distinction between temperature, stored thermal energy, and heat transfer was essential to a consistent theory.\n\nJoseph Fourier established the mathematical foundations of conduction in work presented in 1807 and developed in his 1822 book Théorie analytique de la chaleur. He related local heat flow to the temperature gradient and derived an equation governing the evolution of temperature within a body. His treatment also helped establish trigonometric-series methods for solving differential equations. These methods became important far beyond thermal physics, including in wave theory and signal analysis.\n\nThe nineteenth-century development of the mechanical theory of heat changed the interpretation of conduction without removing Fourier’s central mathematical framework. Work by James Prescott Joule and others established quantitative connections between mechanical work and heating. The first law of thermodynamics then identified conduction as one way energy crosses a system boundary, rather than as the movement of a separately conserved substance.\n\nAt the microscopic level, a body contains energy associated with interacting particles and their available degrees of freedom. Its internal energy is a state property; heat is energy transferred because of a temperature difference. A body therefore does not “contain heat” in the strict thermodynamic sense. Nor does conduction require that the particles carrying energy migrate all the way from the hot end of an object to the cold end. In an insulating crystal, for example, energy can propagate through collective atomic vibrations while the atoms remain near their equilibrium positions.\n\nThe distinction between conduction and other heat-transfer modes is especially important in fluids. A stationary gas conducts energy through molecular motion and collisions. A flowing gas can simultaneously transport energy through bulk motion. Thermal radiation transfers energy through electromagnetic radiation and can cross a vacuum, whereas ordinary conduction requires interacting material degrees of freedom. Real systems commonly combine all three mechanisms, and experiments must separate them if a material’s conductive behavior is to be identified."
    },
    {
      "heading": "Fourier’s law and the heat equation",
      "text": "The central constitutive relation of classical conduction is Fourier’s law. For an isotropic material, it is written\n\n\\[\\mathbf{q}=-k\\nabla T,\\]\n\nwhere \\(\\mathbf{q}\\) is the conductive heat-flux vector, \\(T\\) is temperature, and \\(k\\) is thermal conductivity. Heat flux is the rate of energy transfer per unit area, measured in watts per square metre. Conductivity has units of watts per metre-kelvin. The minus sign indicates that heat flows down the temperature gradient.\n\nConductivity is a material property, whereas conduction is a transport process. A large value of \\(k\\) means that a given temperature gradient produces a large conductive flux. It does not by itself determine the total heat-transfer rate: area, path length, boundary conditions, and temperature dependence also matter. In an anisotropic solid, conductivity is a second-rank tensor,\n\n\\[q_i=-\\sum_j k_{ij}\\frac{\\partial T}{\\partial x_j},\\]\n\nso heat flux need not be parallel to the negative temperature gradient. The tensor describes how transport depends on direction relative to the material’s structure.\n\nCombining Fourier’s law with local conservation of energy gives the heat equation. For a stationary material with no mechanical work, negligible changes in composition, and no phase change, a common form is\n\n\\[\\rho c\\frac{\\partial T}{\\partial t} = \\nabla\\cdot(k\\nabla T)+\\dot q_v,\\]\n\nwhere \\(\\rho\\) is density, \\(c\\) is an appropriate specific heat capacity, and \\(\\dot q_v\\) is volumetric heat generation in watts per cubic metre. The familiar use of \\(c_p\\) is a good approximation for many solids under ordinary conditions. Heat sources may include Joule heating, absorbed light, or a chemical reaction.\n\nWhen properties are constant and heat generation is absent, the equation becomes\n\n\\[\\frac{\\partial T}{\\partial t}=\\alpha\\nabla^2T, \\qquad \\alpha=\\frac{k}{\\rho c}.\\]\n\nThe coefficient \\(\\alpha\\), called thermal diffusivity, measures how quickly temperature differences spread relative to the material’s capacity to store energy. It has units of square metres per second.\n\nFourier conduction also satisfies the second law of thermodynamics. The local rate of entropy production per unit volume due to conduction is\n\n\\[\\dot s_{\\mathrm{gen}} = \\mathbf q\\cdot\\nabla\\left(\\frac{1}{T}\\right) = \\frac{k}{T^2}|\\nabla T|^2\\]\n\nfor an isotropic material with positive conductivity. This expression is nonnegative. Passive conduction therefore reduces temperature differences while producing entropy, even though total energy remains conserved."
    },
    {
      "heading": "Microscopic mechanisms in gases, liquids, and solids",
      "text": "The microscopic carriers of conductive energy depend on the state and electronic structure of matter. In a dilute gas, molecules travel between collisions while carrying translational, rotational, and sometimes vibrational energy. Molecules arriving from a warmer region generally carry more energy than those arriving from a colder region, producing a net transfer even when the average bulk velocity is zero. The details depend on molecular speed, collision cross sections, and the energy exchanged during collisions.\n\nA useful kinetic estimate for an approximately isotropic carrier population is\n\n\\[k\\approx\\frac{1}{3}Cv\\ell,\\]\n\nwhere \\(C\\) is the carriers’ volumetric heat capacity, \\(v\\) is a characteristic speed, and \\(\\ell\\) is their mean free path. The expression is not universally exact, but it identifies three controlling factors: how much energy carriers can store, how rapidly they move, and how far they travel before their motion is randomized. In gases, the same molecular processes also contribute to viscosity and mass diffusion.\n\nLiquids lack the long-range periodic structure of crystals, and their molecules remain closely coupled. Energy transfer involves molecular motion, collisions, and intermolecular forces acting together. A simple picture of freely flying particles is therefore less adequate than it is for a dilute gas. Molecular structure and bonding can be important: the behavior of water, for example, reflects a dynamically changing network of hydrogen bonds. Conduction in liquids is also easily obscured experimentally by buoyancy-driven flow.\n\nIn electrically insulating crystals, much of the heat is carried by lattice vibrations described in quantum theory as phonons. Different vibrational modes have different frequencies, propagation velocities, and lifetimes. Their scattering by other vibrations, impurities, defects, and boundaries limits heat transport. Normal phonon collisions conserve total crystal momentum, whereas Umklapp processes transfer a reciprocal-lattice vector to the crystal and can relax the heat current. The balance among these processes changes strongly with temperature.\n\nIn metals, mobile electrons often carry most of the heat. Only an energy range near the Fermi energy contributes strongly to thermal transport under ordinary conditions. The Wiedemann–Franz law relates electronic conductivity \\(k_e\\) to electrical conductivity \\(\\sigma\\):\n\n\\[\\frac{k_e}{\\sigma T}\\approx L_0, \\qquad L_0=\\frac{\\pi^2k_B^2}{3e^2}.\\]\n\nHere \\(k_B\\) is the Boltzmann constant and \\(e\\) is the elementary charge. The relation works particularly well when electronic scattering affects charge and heat transport similarly. It can fail when inelastic scattering, strong electronic interactions, or additional heat carriers become important."
    },
    {
      "heading": "Material properties and structural controls",
      "text": "Thermal conductivity spans many orders of magnitude, but a quoted number is meaningful only with its measurement conditions. Temperature, purity, crystallographic orientation, porosity, and processing history can all matter. Near room temperature, representative conductivities are approximately \\(0.026\\ \\mathrm{W\\,m^{-1}\\,K^{-1}}\\) for air, \\(0.6\\) for liquid water, \\(1\\) for many glasses, \\(150\\) for crystalline silicon, and \\(400\\) for high-purity copper. These are illustrative values rather than universal constants.\n\nBonding and crystal structure explain some otherwise surprising comparisons. Diamond is an electrical insulator yet can have a room-temperature thermal conductivity above \\(2{,}000\\ \\mathrm{W\\,m^{-1}\\,K^{-1}}\\) in high-quality specimens. Strong bonding, light atoms, and long phonon mean free paths support efficient lattice transport. By contrast, glass lacks crystalline periodicity and scatters vibrational energy strongly. High electrical conductivity is therefore neither necessary nor sufficient for exceptionally high thermal conductivity.\n\nDirectionality is prominent in layered and fibrous materials. Graphite conducts heat much more effectively within its atomic sheets than perpendicular to them. A composite containing aligned fibers can likewise spread heat readily along the fibers while resisting transport across them. Such materials require a conductivity tensor rather than a single scalar value. Even when individual grains are anisotropic, a polycrystalline sample may appear approximately isotropic if its grains have sufficiently random orientations.\n\nTemperature dependence reflects competing microscopic effects. In many crystalline insulators at sufficiently low temperature, the phonon heat capacity varies approximately as \\(T^3\\), and boundary-limited transport can give a similar conductivity dependence. At higher temperatures, increased phonon–phonon scattering often causes conductivity to decrease approximately as \\(1/T\\) over a restricted range. Neither behavior is universal. Metals display trends shaped by impurities, electron–phonon scattering, and the relative contributions of electrons and lattice vibrations.\n\nPorosity generally reduces a solid’s effective conductivity by replacing conducting material with gas-filled or evacuated spaces and by disrupting continuous pathways. However, larger pores can permit fluid circulation, while radiation across pores becomes increasingly important at high temperature. An insulation product’s measured effective conductivity may therefore represent several mechanisms rather than conduction alone.\n\nIsotopic composition supplies a particularly direct microscopic control. Atoms of different isotopes have different masses, which scatter lattice vibrations even when their chemical bonding is essentially unchanged. Isotopic purification can consequently increase conductivity in suitable crystals. Grain size, dislocations, alloy disorder, and interfaces provide additional controls, allowing thermal transport to be modified without necessarily changing the material’s overall chemical identity."
    },
    {
      "heading": "Steady conduction, thermal resistance, and interfaces",
      "text": "Steady conduction occurs when the temperature field no longer changes with time. Energy may still flow continuously through the system; steady state does not imply thermal equilibrium. For a plane wall of thickness \\(L\\), area \\(A\\), and constant conductivity \\(k\\), with uniform temperatures \\(T_h\\) and \\(T_c\\) at its faces and no internal heating,\n\n\\[\\dot Q=\\frac{kA}{L}(T_h-T_c).\\]\n\nThe temperature profile is linear under these assumptions. The corresponding thermal resistance is\n\n\\[R_{\\mathrm{th}}=\\frac{T_h-T_c}{\\dot Q}=\\frac{L}{kA},\\]\n\nwith units of kelvins per watt.\n\nThis formulation resembles Ohm’s law: temperature difference plays the role of potential difference, heat-transfer rate that of current, and thermal resistance that of electrical resistance. Layers carrying the same steady heat-transfer rate have resistances that add in series. Separate paths between common isothermal boundaries have conductances that add in parallel. The analogy is valuable, but a thermal circuit can become nonlinear because conductivity and boundary heat-transfer coefficients vary with temperature.\n\nGeometry changes resistance even when material properties remain uniform. Radial conduction through a cylindrical shell of length \\(L\\), inner radius \\(r_i\\), and outer radius \\(r_o\\) has resistance\n\n\\[R_{\\mathrm{cyl}}=\\frac{\\ln(r_o/r_i)}{2\\pi kL}.\\]\n\nFor a spherical shell,\n\n\\[R_{\\mathrm{sph}}=\\frac{1}{4\\pi k} \\left(\\frac{1}{r_i}-\\frac{1}{r_o}\\right).\\]\n\nThese expressions arise because the available area changes along the heat-flow path. A small heated spot on a large body presents a further complication: heat spreads in several dimensions, producing a spreading or constriction resistance that cannot be represented by the spot area and a simple wall thickness alone.\n\nReal contacting surfaces introduce thermal contact resistance. Even apparently smooth surfaces touch only at microscopic asperities, leaving gaps that may contain air or another fluid. Heat must funnel through the actual contact regions or cross the gaps. Contact pressure, roughness, surface films, and intervening materials therefore influence the temperature drop between nominally touching components. Thermal pastes improve many contacts mainly by replacing poorly conducting voids, not by conducting better than the bulk metal.\n\nAn atomically intimate interface can also resist heat flow. Different vibrational spectra and imperfect transmission of energy carriers produce a temperature discontinuity in a coarse-grained description. Its thermal boundary conductance \\(G\\) is defined through\n\n\\[q''=G(T_1-T_2).\\]\n\nA thin film with high intrinsic conductivity may still have poor overall heat transfer if its interfaces dominate the total resistance. This distinction is central to multilayer coatings and electronic packages."
    },
    {
      "heading": "Transient conduction and boundary conditions",
      "text": "Transient conduction describes temperature fields that evolve with time. A complete classical problem requires an initial temperature distribution, material properties, internal heat sources, and boundary conditions. A specified surface temperature is a Dirichlet condition; a specified heat flux is a Neumann condition. A surface exchanging heat with a surrounding fluid often obeys a mixed, or Robin, condition,\n\n\\[-k\\frac{\\partial T}{\\partial n}=h(T_s-T_\\infty),\\]\n\nwhere \\(n\\) points outward, \\(h\\) is the convective heat-transfer coefficient, \\(T_s\\) is surface temperature, and \\(T_\\infty\\) is the surrounding fluid temperature. Radiation can supply an additional nonlinear boundary term.\n\nA useful characteristic conduction time across a distance \\(L\\) is\n\n\\[t_d\\sim\\frac{L^2}{\\alpha}.\\]\n\nThe quadratic dependence on length is fundamental. If all other conditions are comparable, doubling the distance increases the characteristic time by a factor of four. A diffusivity of \\(10^{-4}\\ \\mathrm{m^2\\,s^{-1}}\\), representative of a highly conducting metal, gives a characteristic time of about one second across one centimetre. A diffusivity of \\(10^{-7}\\ \\mathrm{m^2\\,s^{-1}}\\) gives about \\(1{,}000\\) seconds over the same distance. Exact equilibration times depend on geometry and boundary conditions.\n\nTwo dimensionless quantities organize many transient problems. The Fourier number,\n\n\\[\\mathrm{Fo}=\\frac{\\alpha t}{L_c^2},\\]\n\nmeasures elapsed time relative to internal diffusion. The Biot number,\n\n\\[\\mathrm{Bi}=\\frac{hL_c}{k},\\]\n\ncompares internal conductive resistance with external convective resistance. A common characteristic length for lumped analysis is \\(L_c=V/A_s\\), where \\(V\\) is volume and \\(A_s\\) is the exchanging surface area.\n\nWhen the Biot number is sufficiently small—often below about \\(0.1\\) as an engineering criterion—the body can be approximated as having a spatially uniform temperature. With constant properties, no internal generation, and convection to a fixed environment,\n\n\\[T(t)-T_\\infty = (T_0-T_\\infty) \\exp\\left(-\\frac{hA_s}{\\rho cV}t\\right).\\]\n\nFor larger Biot numbers, internal temperature gradients must be resolved. Analytical solutions exist for idealized slabs, cylinders, and spheres; complex geometries generally require numerical methods such as the finite element method.\n\nMelting and freezing introduce a moving boundary and an energy balance involving latent heat. The temperature at a pure material’s equilibrium phase boundary can remain nearly fixed while energy changes the solid and liquid fractions. These Stefan problems cannot generally be represented by a constant heat capacity alone. They arise in casting, ice formation, and phase-change thermal storage, where the motion of the interface is as important as the temperature field within each phase."
    },
    {
      "heading": "Experimental measurement and computational determination",
      "text": "Measuring conduction requires distinguishing the desired heat flow from losses, bypass paths, and transient energy storage. A thermometer records temperature, not conductivity directly. Conductivity is inferred by combining measured temperatures and energy inputs with a model of the specimen and apparatus. Contact resistance, uncertain dimensions, sample anisotropy, and parasitic radiation or convection can all bias the result. Reliable work therefore depends on calibration, reference materials where appropriate, and an explicit assessment of measurement uncertainty.\n\nSteady-state methods establish a stable heat flow through a sample of known geometry. In a guarded hot-plate apparatus, a central heated region is surrounded by a guard intended to suppress lateral heat leakage. The measured heat input, sample thickness, area, and temperature difference determine conductivity or thermal resistance. Such methods are widely used for insulation materials. Comparative methods instead place an unknown specimen and a reference material in a controlled heat-flow arrangement, deriving properties from their respective temperature gradients.\n\nTransient techniques infer transport from the response to a brief or time-dependent excitation. In the laser-flash method, developed by W. J. Parker and colleagues in 1961, a short pulse heats one face of a thin specimen and the opposite-face temperature rise is recorded. For the ideal model of an opaque, homogeneous, adiabatic slab receiving an instantaneous pulse,\n\n\\[\\alpha\\approx0.1388\\frac{L^2}{t_{1/2}},\\]\n\nwhere \\(t_{1/2}\\) is the time required for the rear face to reach half its maximum temperature rise. Finite pulse duration, heat losses, and multilayer structures require corrections. Conductivity is then obtained from \\(k=\\alpha\\rho c\\), so diffusivity measurement alone does not establish conductivity.\n\nOther transient methods use a heated wire, planar sensor, or patterned metal line. In the \\(3\\omega\\) method, an alternating current at angular frequency \\(\\omega\\) generates heating at \\(2\\omega\\); the resulting resistance oscillation produces a voltage component at \\(3\\omega\\). Its amplitude and phase carry information about thermal transport. Time-domain thermoreflectance uses ultrafast optical heating and the temperature dependence of reflectivity to study thin films and interfaces. Extracted parameters depend on a thermal model and may be correlated with one another.\n\nComputational methods complement experiments at different scales. Continuum simulations solve the heat equation for devices and structures. Molecular dynamics follows atomic trajectories under specified interaction models, while phonon transport calculations combine vibrational properties with scattering rates. Equilibrium simulations can obtain conductivity from heat-current correlations; nonequilibrium simulations impose a thermal drive. Finite simulation size, approximate interactions, and treatment of quantum statistics limit accuracy, so agreement with a single measurement does not establish that every underlying mechanism has been captured."
    },
    {
      "heading": "Nanoscale, ultrafast, and non-Fourier transport",
      "text": "Fourier’s law assumes that heat flux is determined by a local temperature gradient. This requires a useful local temperature and sufficiently rapid relaxation of microscopic carriers. The assumptions can fail when a structure is comparable in size to important carrier mean free paths or when heating occurs on a timescale comparable to relaxation times. Apparent conductivity can then depend on sample dimensions, excitation frequency, or measurement geometry rather than behaving as a scale-independent bulk property.\n\nThe Knudsen number,\n\n\\[\\mathrm{Kn}=\\frac{\\ell}{L},\\]\n\ncompares a representative mean free path with a system length. When it is small, many scattering events occur across the temperature-variation scale, favoring diffusion. When it approaches or exceeds unity, ballistic or quasiballistic transport becomes important. Real solids possess broad distributions of mean free paths, so a single Knudsen number is often only a guide. Some phonons may propagate ballistically while others remain diffusive in the same specimen.\n\nThe Boltzmann transport equation describes carrier distributions in position, wave-vector, and time, including propagation and collisions. Fourier behavior emerges from it under suitable near-equilibrium, long-length-scale limits. In a ballistic channel, transport is more naturally characterized by thermal conductance and mode transmission than by a bulk conductivity. The thermal conductance quantum per fully transmitting mode is\n\n\\[G_Q=\\frac{\\pi^2k_B^2T}{3h},\\]\n\nwhere \\(h\\) is the Planck constant. Quantized thermal conductance was experimentally demonstrated in suspended nanostructures at low temperature in 2000.\n\nUltrafast laser excitation can create different effective temperatures for electronic and lattice subsystems. In a metal, electrons may absorb optical energy before transferring it to phonons. A two-temperature model assigns separate temperatures to these subsystems and couples their energy balances through an electron–phonon energy-transfer term. Such a model is useful only when each subsystem internally approaches an appropriate thermal distribution; immediately after excitation, a more detailed nonequilibrium description may be required.\n\nWave-like heat propagation is another departure from ordinary diffusion. Second sound occurs in particular regimes where collective transport permits temperature disturbances to propagate as waves. It is associated with superfluidity in helium and has also been observed in selected crystalline solids under suitable conditions. A simplified finite-relaxation model replaces instantaneous Fourier response with\n\n\\[\\tau\\frac{\\partial\\mathbf q}{\\partial t}+\\mathbf q=-k\\nabla T.\\]\n\nThis Cattaneo-type relation introduces a heat-flux relaxation time \\(\\tau\\), but it is not a universal description of nanoscale transport. Ballistic propagation, hydrodynamic phonon flow, and distinct subsystem temperatures represent different physical departures from the classical assumptions."
    },
    {
      "heading": "Engineering, Earth science, and thermal materials",
      "text": "In buildings, conduction through walls, roofs, windows, and structural connections contributes to heat exchange with the environment. Insulation increases thermal resistance, but continuous metal members or concrete connections can create thermal bridges that bypass otherwise effective insulating layers. Overall heat-transfer coefficients include surface convection and radiation as well as conduction through materials. Moisture further complicates performance because replacing air in pores with water generally increases conductive transport and may also introduce latent-energy effects.\n\nElectronic systems require heat to move from small active regions to larger cooling surfaces. The path may include a semiconductor die, bonding layers, a package, a thermal interface material, and a heat sink. Its total resistance, rather than the conductivity of one component, determines the steady temperature rise for a given dissipated power. As devices shrink, spreading resistance and interface resistance become increasingly important. Poor heat removal can contribute to thermal runaway when temperature-dependent electrical losses increase faster than heat can escape.\n\nThe thermal objectives of materials design are not always to maximize conductivity. Thermoelectric devices exploit the thermoelectric effect to couple electrical and thermal transport. Their performance is commonly characterized by\n\n\\[ZT=\\frac{S^2\\sigma T}{k},\\]\n\nwhere \\(S\\) is the Seebeck coefficient and \\(k\\) includes both electronic and lattice contributions. Reducing lattice conductivity while retaining favorable electrical transport can improve \\(ZT\\), although these properties are often coupled. Alloying, complex crystal structures, and nanostructuring are used to scatter phonons, but they may also hinder charge carriers.\n\nConduction is central to geothermal energy and the interpretation of subsurface temperature gradients. A vertical temperature gradient of \\(25\\)–\\(30\\ \\mathrm{K\\,km^{-1}}\\) combined with rock conductivity of \\(2\\)–\\(3\\ \\mathrm{W\\,m^{-1}\\,K^{-1}}\\) corresponds to a conductive flux of roughly \\(0.05\\)–\\(0.09\\ \\mathrm{W\\,m^{-2}}\\). Actual values vary widely. Flowing groundwater, magma movement, and hydrothermal circulation can transport heat in ways that invalidate a purely conductive interpretation.\n\nConduction also sets the rate at which seasonal surface-temperature changes penetrate soil and rock. For a sinusoidal boundary temperature with angular frequency \\(\\omega\\), a uniform semi-infinite medium has a characteristic penetration depth\n\n\\[\\delta=\\sqrt{\\frac{2\\alpha}{\\omega}}.\\]\n\nThe oscillation’s amplitude decreases exponentially with depth while its phase lags progressively behind the surface. With \\(\\alpha=10^{-6}\\ \\mathrm{m^2\\,s^{-1}}\\), the characteristic depth is about \\(0.17\\) metre for a daily cycle and \\(3.2\\) metres for an annual cycle. Snow cover, layered soils, changing moisture, and freezing modify this idealized response, making coupled heat and phase-change models important in studies of permafrost."
    }
  ],
  "links": [
    "heat",
    "energy",
    "temperature",
    "convection",
    "thermal-radiation",
    "thermodynamics",
    "joseph-fourier",
    "james-prescott-joule",
    "first-law-of-thermodynamics",
    "internal-energy",
    "electromagnetic-radiation",
    "thermal-conductivity",
    "heat-equation",
    "density",
    "heat-capacity",
    "joule-heating",
    "thermal-diffusivity",
    "second-law-of-thermodynamics",
    "entropy",
    "viscosity",
    "diffusion",
    "water",
    "hydrogen-bond",
    "phonon",
    "electron",
    "fermi-energy",
    "wiedemann-franz-law",
    "boltzmann-constant",
    "elementary-charge",
    "silicon",
    "diamond",
    "graphite",
    "isotope",
    "thermal-resistance",
    "ohms-law",
    "electrical-resistance",
    "finite-element-method",
    "latent-heat",
    "calibration",
    "measurement-uncertainty",
    "planck-constant",
    "superfluidity",
    "thermal-runaway",
    "geothermal-energy",
    "groundwater",
    "permafrost"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}