{
  "id": "telegraphy",
  "title": "Telegraphy",
  "lang": "en",
  "source_lang": "en",
  "summary": "Telegraphy is the transmission of encoded messages over distance, using visual signals, electrical circuits, or radio rather than physically transporting the message.",
  "category": "technology",
  "subcategory": "engineering",
  "type": "concept",
  "aliases": [
    "Telegraphic communication"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/telegraphy/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/telegraphy/",
      "json": "https://aiwiki.page/zh/telegraphy.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Telegraphy is the transmission of messages over a distance by means of agreed signals, without physically carrying the written message between its endpoints. In its broad historical sense, it includes visual systems such as semaphore towers; in ordinary usage, it chiefly denotes electrical and radio systems that transmit text as coded signals. A telegram is a message handled by a telegraph service, whereas telegraphy is the method of communication. Unlike a telephone, which originally conveyed continuously varying speech signals, a telegraph generally represented information through discrete selections, pulses, or combinations of signal states.\n\nTelegraphy made rapid long-distance communication a routine service rather than an exceptional achievement. During the nineteenth century, wires along railways, cables beneath oceans, and interconnected telegraph offices allowed news and instructions to travel much faster than people or goods. These networks changed commercial coordination, journalism, military command, diplomacy, and the administration of large territories. Their operation also helped establish important practices in telecommunications: standardized codes, shared circuits, traffic priorities, international accounting, and technical regulation.\n\nTelegraphy developed through several overlapping technologies rather than a single invention. Visual networks preceded practical electrical systems; needle instruments and Morse apparatus competed before printing telegraphs and automatic equipment expanded capacity. Wireless telegraphy then connected ships and places beyond wired networks. Although most public telegram services eventually disappeared or became specialized services carried over newer networks, telegraph engineering contributed directly to modern digital communication."
    },
    {
      "heading": "Visual signaling and the first telegraph networks",
      "text": "Long before electrical telegraphy, societies used fires, smoke, flags, drums, and other signals to communicate beyond shouting distance. Such methods varied greatly in capability. A beacon might announce only a previously agreed event, whereas a more elaborate system could select messages from a codebook. The central technical distinction was between signaling a limited set of conditions and transmitting a flexible sequence capable of expressing unfamiliar information. Both depended on shared conventions, but the latter required more complex encoding and disciplined operation.\n\nThe most extensive early systems of this second kind were optical telegraphs. In revolutionary France, Claude Chappe and his collaborators developed a semaphore apparatus consisting of a large movable crosspiece and two articulated arms mounted on a prominent building or tower. Operators observed neighboring stations through telescopes and reproduced their signals. A working Paris–Lille line entered service in 1794, establishing a model that was subsequently extended across France. Other European states adopted their own optical systems, with different mechanisms and codes.\n\nChappe's apparatus did not normally spell out every message letter by letter. Combinations of positions identified entries in codebooks, allowing a small number of visible signals to represent words or phrases. Intermediate operators generally relayed the displayed positions rather than interpreting the complete message. This division between transmission and interpretation helped maintain control over official communications. End stations performed the conversion between ordinary language and coded signals, while the intervening chain reproduced them.\n\nThe effectiveness of an optical line depended on geography and visibility. Stations had to stand within sight of their neighbors, often on hills or elevated structures, and every active relay required personnel. Darkness, fog, precipitation, and battlefield smoke could interrupt service. A message might pass rapidly along a functioning chain, but the network was not continuously available in the way that later wired systems could be. Building and staffing many strategically located towers also made coverage expensive.\n\nNevertheless, optical telegraphy established several durable features of telecommunications networks: fixed routes, relay stations, operating schedules, centralized supervision, and formal message procedures. Its principal customers were governments and military authorities rather than private households. Electrical systems eventually displaced most semaphore networks because wires could operate without line of sight and, with suitable insulation and maintenance, in darkness and poor visibility. Visual signaling continued in narrower roles, especially naval flag signaling and communication where electrical equipment was unavailable or undesirable."
    },
    {
      "heading": "The emergence of practical electrical telegraphy",
      "text": "Electrical telegraphy became possible through the convergence of experimental knowledge and usable components. Early demonstrations involving static electricity showed that electrical effects could be transmitted along conductors, but they did not provide a convenient basis for dependable networks. Alessandro Volta's battery, announced in 1800, supplied a sustained source of current. Hans Christian Ørsted's demonstration in 1820 that an electric current deflects a magnetic needle provided a practical means of converting an electrical signal into visible motion.\n\nDuring the 1820s and 1830s, inventors explored electrochemical, electromagnetic, and needle-based instruments. Pavel Schilling demonstrated an electromagnetic telegraph in 1832. In Göttingen in 1833, Carl Friedrich Gauss and Wilhelm Weber operated a line linking scientific workplaces. These systems showed that useful messages could be transmitted electrically, but commercial adoption required reliable apparatus, manageable wiring costs, and customers whose needs justified investment.\n\nIn Britain, William Fothergill Cooke and Charles Wheatstone patented a practical telegraph system in 1837. Their early five-needle apparatus used combinations of needle deflections to point toward letters on a display. It had the advantage of making many characters directly readable without requiring an operator to interpret a sequence of dots and dashes. Its multiple conductors, however, increased installation costs. Simpler two-needle and one-needle instruments subsequently became important in British railway and commercial service.\n\nIn the United States, Samuel F. B. Morse, Alfred Vail, and other collaborators developed a different arrangement. A transmitter interrupted current in a circuit, and an electromagnetic receiver marked a moving paper strip or produced mechanical movements that could be heard. A federally funded experimental line between Washington and Baltimore carried Morse's celebrated “What hath God wrought” message on 24 May 1844. The demonstration became a landmark in American telegraph history, although practical electrical telegraphy had developed through several independent lines of work.\n\nThe competing systems illustrate why telegraphy has no single uncontested inventor. Contributions included discoveries about electricity and magnetism, instruments, character codes, line construction, repeaters, and commercial organization. Patent rights and national traditions often elevated particular individuals while obscuring collaborators and earlier experiments. The technologies that spread most widely were not necessarily the first demonstrated; they were those that could be built, maintained, taught, and integrated into expanding networks at acceptable cost."
    },
    {
      "heading": "Circuits, receivers, and message codes",
      "text": "A basic electrical telegraph circuit contained a source of electrical energy, a transmitting switch, a conducting path, and a receiving instrument. Pressing a key changed the circuit's electrical state. At the receiving end, current through an electromagnet moved an armature, deflected a needle, or actuated a printing mechanism. Early lines sometimes used separate outgoing and return wires. Earth-return arrangements reduced the quantity of wire by using grounded electrodes to complete the circuit, although their performance depended on grounding conditions and could be affected by unwanted currents.\n\nLong lines introduced resistance, leakage, and other losses. An electromagnetic relay allowed a relatively weak incoming signal to switch a locally powered circuit. Relays could operate a stronger receiving instrument or pass signals onward over another section. Telegraph batteries therefore supplied energy at intermediate points rather than requiring the original source to drive an entire continental route unaided. In manually repeated traffic, an operator instead read a message and retransmitted it, introducing both delay and opportunities for error.\n\nMorse code represented characters through short and long signal elements separated by carefully differentiated intervals. International Morse, which differs from the older American Morse code, gives a dot one time unit and a dash three. The interval between elements of a character is one unit, between characters three units, and between words seven units. The widely used speed convention based on the reference word “PARIS” treats that word, including its following space, as 50 time units. At \\(W\\) such words per minute, the dot duration is\n\n\\[t_{\\text{dot}}=\\frac{1.2}{W}\\ \\text{seconds}.\\]\n\nAt 20 words per minute, a dot therefore lasts 0.06 seconds. Actual message throughput also depends on text composition, operator skill, repetitions, and administrative exchanges.\n\nMorse was economical for hand operation because common letters generally received short representations. Skilled operators learned to recognize rhythmic patterns directly rather than consciously counting every element. In landline service, a sounder often produced distinct clicks as its armature moved down and returned; the intervals between clicks conveyed the code. The familiar sustained audible tones associated with Morse are especially characteristic of radio reception and electronic practice, not every historical wire instrument.\n\nTelegraph circuits had to distinguish intentional signaling from interference and faults. Poor joints, damaged insulation, lightning, and electromagnetic disturbances could cause false marks or missing elements. Closed-circuit working on many landlines made an unintended interruption conspicuous, though practices differed between networks. Testing instruments and operating procedures were therefore as important as the code itself. Reliable communication depended on the complete chain of power supplies, conductors, terminals, trained operators, and confirmation procedures."
    },
    {
      "heading": "Land networks, railway operation, and public telegrams",
      "text": "The railway was both an early customer for telegraphy and a convenient route along which to build it. Railway companies controlled continuous rights of way, and stations provided accessible places for instruments and staff. Telegraph companies could therefore avoid negotiating a separate route across every intervening property. In return, railway management gained a means to coordinate traffic more rapidly than messages carried by trains or riders.\n\nTelegraphy became particularly important on single-track railways, where trains moving in opposite directions had to meet at designated passing places. Dispatchers could send orders adjusting movements in response to delays or changing conditions. In block working, information about the occupancy of sections helped keep trains separated. These practices were not equivalent to an automatically fail-safe system: misunderstood orders, incorrect repetition, or procedural violations could still cause collisions. Railway administrations consequently developed formal wording, read-back requirements, records, and rules defining who could authorize a movement.\n\nPublic telegraph networks added another organizational layer. A customer typically submitted a written message at an office and paid according to the destination, service class, and number of chargeable words. An originating operator transmitted the message toward its destination, sometimes through several intermediate offices. The receiving office produced a written copy and arranged local delivery, often by messenger. Thus, near-instantaneous electrical transmission did not imply instantaneous door-to-door delivery. Queues, office hours, route congestion, retransmission, and the final journey to the recipient could dominate the elapsed time.\n\nMessages carried administrative information as well as their substantive text. Addresses, filing times, office identifiers, word counts, and service instructions helped route traffic and detect mistakes. Operators might repeat difficult names or use standardized spelling procedures. Requests for clarification and correction were themselves part of network traffic. Major offices organized operators and circuits by route and workload, developing methods for handling surges during financial disturbances, elections, disasters, or military crises.\n\nThe resulting networks became major forms of communications infrastructure. Western Union, established under that name in 1856, consolidated much of the American telegraph business, while other countries favored state postal-telegraph administrations or mixed arrangements. Ownership affected tariffs, access, investment, and the relationship between profitable trunk routes and sparsely used local connections. Telegraph offices became familiar features of railway stations, commercial districts, ports, and administrative centers, but access remained uneven: proximity to a line and the ability to pay strongly influenced who could benefit from rapid communication."
    },
    {
      "heading": "Submarine cables and intercontinental communication",
      "text": "A submarine communications cable had to carry signals while surviving conditions very different from those of an overhead wire. Its conductor required continuous insulation against seawater, protection against handling damage, and sufficient mechanical strength for manufacture and laying. Gutta-percha, a natural material obtained from certain tropical trees, became especially important as an underwater insulating material in the nineteenth century. Protective coverings and iron-wire armor helped shield cables, with heavier protection commonly used near shores where anchors and fishing activity posed greater risks.\n\nA short-lived cable was laid across the English Channel in 1850, followed by a successful working connection in 1851. Ocean crossings were more difficult because of their length, depth, and the stresses imposed during laying. The first transatlantic telegraph cable, completed in 1858, exchanged messages but failed after only a few weeks of operation. Successful installation in 1866, using the large steamship Great Eastern, established a durable Atlantic service; that expedition also recovered and completed a cable lost during the previous year's attempt.\n\nElectrical behavior imposed another difficulty. A long cable's conductor and the surrounding seawater, separated by insulation, formed a distributed capacitance, while the conductor itself had resistance. Applied pulses spread out as the cable charged and discharged, making closely spaced signals difficult to distinguish. For an idealized uniform resistance–capacitance line, a characteristic distortion timescale increases approximately with the square of length:\n\n\\[\\tau \\propto r c L^{2},\\]\n\nwhere \\(r\\) and \\(c\\) are resistance and capacitance per unit length and \\(L\\) is cable length. This simplified relation describes a distortion scale, not the speed at which an electromagnetic disturbance first reaches the far end.\n\nWilliam Thomson, later Lord Kelvin, helped establish the mathematical treatment of cable signaling and developed sensitive receiving instruments. His mirror galvanometer used a reflected beam of light to make very small current variations visible. The later siphon recorder traced signals on moving paper. Such instruments enabled operators to detect weak signals rather than relying simply on higher transmitting voltages, which could damage imperfect insulation.\n\nCable networks eventually connected major ports and imperial centers through increasingly elaborate routes. Their construction relied on specialized factories, cable-laying ships, seabed surveys, and repair fleets. Breaks could require locating a fault electrically, grappling for the cable, bringing it aboard, and inserting a repaired section. The expense encouraged high tariffs and concentrated traffic on commercially valuable routes. Despite these limitations, submarine telegraphy reduced intercontinental communication delays from the duration of a sea voyage to the time required for network handling and transmission."
    },
    {
      "heading": "Multiplexing, automatic transmission, and printing telegraphs",
      "text": "As telegraph traffic increased, constructing additional wires was not always the cheapest way to expand capacity. Multiplexing allowed more than one stream of messages to share a physical connection. Duplex telegraphy supported simultaneous transmission in opposite directions by arranging electrical circuits so that a station's own signals did not overwhelm its receiver. Thomas Edison's quadruplex system, developed in the 1870s, combined methods that distinguished signal polarity and strength to support two messages in each direction over one wire.\n\nOther systems divided access in time. Rotating distributors successively connected different operators or instruments to the same line, provided that the distributors at both ends remained synchronized. These arrangements required more elaborate apparatus than a simple Morse circuit, but they could make heavily used routes much more productive. Capacity increasingly depended on coordinated terminal machinery as well as the electrical properties of the line.\n\nAutomatic transmitters separated message preparation from line use. An operator could punch a message into paper tape, after which a mechanical reader transmitted the recorded pattern at a steady speed. On busy routes, prepared tapes reduced pauses and made it possible to operate faster than sustained manual keying. Receiving equipment could record signals for later reading or produce another tape for retransmission. Such methods also changed the organization of labor, separating typing, circuit operation, and message checking.\n\nPrinting telegraphs sought to deliver readable characters directly. David Edward Hughes developed an influential printing system in the 1850s. In the 1870s, Émile Baudot introduced a five-unit code and associated multiplex equipment. Five binary positions provide \\(2^5=32\\) combinations, insufficient for a full alphabet, numerals, punctuation, and controls without additional conventions. Later codes derived from this tradition used shift signals to alternate between letters and figures. International Telegraph Alphabet No. 2, often loosely called Baudot code, was a later development rather than simply Baudot's original arrangement.\n\nThe teleprinter brought keyboard entry and automatic character printing into a robust office instrument. Start-stop operation allowed each character to re-establish timing, reducing the need for continuously synchronized rotating mechanisms. A start element initiated the receiving cycle, fixed-duration data elements represented the character, and a stop interval allowed the mechanism to settle. The baud, named after Baudot, measures symbols per second rather than words per minute or necessarily bits per second. A nominal 50-baud teleprinter using five data elements and start-stop framing could deliver roughly 400 characters per minute, depending on its framing. These machines made text communication less dependent on operators trained to read Morse by ear."
    },
    {
      "heading": "Wireless telegraphy and communication at sea",
      "text": "Radio extended telegraphy beyond fixed conducting paths. Heinrich Hertz's experiments in the late 1880s demonstrated electromagnetic waves, and subsequent investigators developed practical transmitters, detectors, tuning arrangements, and antennas. Guglielmo Marconi combined and improved these elements in systems intended for operational communication. Wireless telegraphy became especially valuable aboard ships, where a cable could not provide a continuing connection during a voyage.\n\nEarly spark transmitters produced trains of rapidly damped oscillations. Keying them on and off conveyed Morse signals, which receivers converted into indications or audible sounds. Their emissions occupied relatively broad frequency ranges and could interfere with nearby services. Tuning improved selectivity, but increasing traffic exposed the limitations of spark equipment. Continuous-wave transmitters, developed using high-frequency alternators, arc systems, and later electronic valves, enabled narrower signals and more efficient use of the spectrum.\n\nRadio paths differed fundamentally from wires. Signals could reach multiple receivers rather than only the next station on a defined circuit, making call signs, listening practices, and channel coordination essential. Range varied with frequency, transmitter power, antenna design, atmospheric conditions, and propagation mode. Long wavelengths supported important early maritime services. Later exploitation of shortwave propagation through the ionosphere made intercontinental communication possible with equipment and power levels that could be smaller than those used at early long-wave stations.\n\nMaritime distress procedures helped drive international coordination. The 1906 International Radiotelegraph Convention adopted the three-dot, three-dash, three-dot distress signal, commonly written SOS, with the convention taking effect in 1908. The letters were not originally an abbreviation for a phrase. Its distinctive uninterrupted pattern was intended to be readily recognized. During the Titanic disaster in April 1912, operators transmitted both the older CQD call and SOS. The disaster intensified attention to continuous radio watch, operator staffing, emergency power, and shipboard safety regulation.\n\nWireless telegraphy also served expeditions, aviation, military units, and remote settlements. Its mobility came with disadvantages: reception could be uncertain, atmospheric noise could obscure weak signals, and any suitably equipped listener might intercept a transmission. By World War II, radio telegraphy was an established element of military and maritime communications, operating alongside voice radio and wired circuits. Morse persisted on difficult paths because a trained operator could recognize a narrowband keyed signal under conditions in which speech was unintelligible, although its effectiveness still depended on signal strength, interference, propagation, and operator performance."
    },
    {
      "heading": "Markets, news, administration, and international regulation",
      "text": "Telegraphy altered the timing of economic information. Before rapid electrical communication, prices reported from a distant trading center might already be days or weeks old. Telegraph links enabled merchants to compare markets, place orders, and adjust shipments much sooner. This supported coordination in trade, shipping, insurance, and finance, although the effects varied with tariffs, network coverage, and access to reliable information. Faster communication did not eliminate uncertainty: reports could be mistaken, incomplete, manipulated, or overtaken by events.\n\nBusinesses adapted their writing to charging rules. Commercial codebooks assigned short codewords to longer phrases, sometimes compressing complex shipping or purchasing instructions into a few chargeable units. Such systems could reduce cost and provide limited concealment, but a single mistransmitted character might radically change a message's meaning. Telegraph administrations therefore developed rules for acceptable code language and word counting, while codebook publishers introduced arrangements intended to make errors easier to detect.\n\nNews organizations became major users. Agencies gathered reports at central offices and distributed them to subscribing newspapers over telegraph circuits. Reuters, founded in London in 1851, became closely associated with the rapid movement of financial and general news. Newspapers could publish accounts of distant events much sooner, but the expense of transmission encouraged concise dispatches and the sharing of reports. Control of lines, preferential access, and dependence on a small number of agencies influenced which events received attention and how quickly reports circulated.\n\nGovernment use ranged from routine administration to the direction of distant officials. Telegraph networks helped coordinate responses to emergencies and maintain contact across large territories. In colonial settings, cables and inland lines supported imperial administration, commercial extraction, and military operations. Their routes reflected political and economic priorities rather than geographically even provision. Control of landing points, transit routes, and repair facilities could therefore carry strategic importance beyond the revenue earned from messages.\n\nInternational traffic required agreements because messages crossed systems with different codes, tariffs, and operating practices. Representatives of 20 states signed the first International Telegraph Convention in Paris on 17 May 1865, establishing the International Telegraph Union. This organization developed into the International Telecommunication Union, its present name dating from 1932. Negotiations addressed technical compatibility, charging, accounting, and service procedures. Telegraphy thus created an early, durable field of international technical cooperation in which the usefulness of each national network depended partly on arrangements with others."
    },
    {
      "heading": "Warfare, interception, and communications security",
      "text": "Telegraphy enabled commanders and political authorities to exchange orders over distances that previously required couriers. Field forces laid temporary wires, repaired damaged routes, and connected headquarters with supply points and subordinate formations. During the American Civil War, telegraph offices became important channels between the federal government and armies in the field. The value of rapid communication nevertheless depended on where lines actually ran: moving units could outpace construction, and a severed route could restore dependence on messengers.\n\nThe same infrastructure became a target. Cutting wires, destroying poles, seizing offices, or disrupting power could isolate an opponent. Submarine cables offered greater protection from ordinary land attack but remained vulnerable at landing stations and could be cut at sea. At the beginning of World War I, Britain cut German overseas cables, contributing to changes in German international communications routes. Radio offered alternative paths but made interception possible without physical access to a conductor.\n\nTelegraphic security involved several distinct problems. Physical control could protect an office or cable landing, but it did not by itself conceal a message passing through another administration. Cryptography transformed the message content so that possession of the transmitted symbols would not necessarily reveal the plaintext. Codebooks replaced words or phrases with groups; ciphers applied systematic transformations to letters, digits, or other units. Military and diplomatic systems often combined such methods. Their security depended on key management, operator discipline, the design of the system, and an adversary's analytical resources.\n\nThe Zimmermann Telegram illustrates the political consequences of intercepted telegraphic traffic. In January 1917, German foreign secretary Arthur Zimmermann proposed an alliance with Mexico in the event of war between Germany and the United States. British intelligence intercepted and deciphered the message. Its publication in March contributed to American public debate before the United States entered the war in April. The episode involved not merely codebreaking but also decisions about how to disclose intelligence without exposing sensitive capabilities.\n\nEven encrypted traffic revealed information through its external characteristics. Call signs, addresses, message lengths, timing, and changing traffic volumes could indicate organizational relationships or preparations for activity. Wireless direction finding could help locate transmitters. These practices developed into systematic traffic analysis and signals intelligence. Censorship formed a separate layer of control: authorities could inspect, delay, alter, or prohibit messages during war or political emergencies. Telegraphy therefore accelerated communication while also creating centralized points where communication could be monitored and constrained."
    },
    {
      "heading": "Telex, electronic networks, and the contraction of public services",
      "text": "During the twentieth century, telephone service took over much person-to-person communication that might previously have required a telegram. A telephone conversation allowed immediate clarification and conveyed speech without a specialist intermediary. Telegraphy nevertheless retained advantages where a written record, standardized business handling, or dependable long-distance text connection mattered. Public telegrams, private leased circuits, broadcasting links, and machine-to-machine text services consequently followed different paths rather than disappearing together.\n\nTelex extended teleprinter operation into a switched subscriber network. A user could call another subscriber and type directly to a remote printing machine, with answerback identification helping confirm the endpoint. Commercial telex service developed in Europe in the 1930s and expanded internationally after World War II. It became important in banking, shipping, diplomacy, news distribution, and multinational business. Unlike a public telegram, which passed through an operator-handled delivery service, a telex exchange could connect the correspondents' own machines.\n\nElectronic switching and computing gradually changed both telegraph offices and transmission networks. Messages could be stored, routed, and retransmitted automatically rather than handled entirely as live operator-to-operator exchanges. Telegraph channels were carried over shared telephone facilities, radio links, and later digital networks. A service's outward form therefore did not necessarily reveal its underlying transmission technology: a message delivered as a telegram might have traveled over electronic data links rather than a dedicated traditional telegraph wire.\n\nFax, electronic mail, and the Internet reduced demand for telegrams and telex by allowing users to transmit text and documents directly through widely available equipment. Public services contracted at different rates in different countries. Western Union ended its telegram service in 2006, and India's state-owned BSNL ended its inland telegram service in July 2013. These closures did not mark a single worldwide end to telegraphy; specialized telegram businesses, radio amateurs, historical operations, and some institutional uses continued.\n\nTelegraphy's technical legacy extends beyond its surviving services. It made discrete signaling, coded alphabets, multiplexed channels, and automated text reception practical on a large scale. Harry Nyquist's work on telegraph transmission in the 1920s helped establish relationships between signaling rate and channel bandwidth, while Ralph Hartley's 1928 work developed a quantitative measure of information. These contributions preceded Claude Shannon's general formulation of information theory in 1948. Modern networks differ radically from nineteenth-century telegraph systems, but problems first encountered in telegraph engineering—symbol timing, distortion, interference, synchronization, routing, and efficient use of shared channels—remain central to digital communications."
    }
  ],
  "links": [
    "telecommunications",
    "france",
    "battery",
    "united-states",
    "railway",
    "infrastructure",
    "multiplexing",
    "antenna",
    "world-war-ii",
    "trade",
    "international-telecommunication-union",
    "world-war-i",
    "cryptography",
    "zimmermann-telegram",
    "telephone",
    "telex",
    "internet",
    "information-theory"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}