{
  "id": "steradian",
  "title": "Steradian",
  "lang": "en",
  "source_lang": "en",
  "summary": "The steradian (sr) is the SI unit of solid angle, defined by a spherical surface area equal to the square of the sphere’s radius.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Square radian"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/steradian/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/steradian/",
      "json": "https://aiwiki.page/zh/steradian.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The steradian, symbol sr, is the unit of solid angle in the International System of Units (SI). One steradian is the solid angle subtended at the centre of a sphere by a region of its surface whose area equals the square of the sphere’s radius. A complete sphere subtends \\(4\\pi\\) steradians, and a hemisphere subtends \\(2\\pi\\) steradians. The steradian measures the angular extent of a region in three-dimensional space, rather than its physical area or volume."
    },
    {
      "heading": "Definition and geometric meaning",
      "text": "For a region on a sphere of radius \\(r\\), the solid angle \\(\\Omega\\) subtended at the centre is\n\n\\[\\Omega=\\frac{A}{r^2},\\]\n\nwhere \\(A\\) is the area of the spherical region. Thus, a region with \\(A=r^2\\) subtends \\(1\\,\\mathrm{sr}\\).\n\nThe spherical region need not be circular or have any particular boundary shape. Regions with different shapes can subtend the same solid angle, just as differently shaped plane figures can have equal areas.\n\nA sphere’s total surface area is \\(4\\pi r^2\\), so the solid angle covering all directions from a point is\n\n\\[\\Omega_{\\text{sphere}}=\\frac{4\\pi r^2}{r^2} =4\\pi\\,\\mathrm{sr} \\approx12.5664\\,\\mathrm{sr}.\\]\n\nConsequently, one steradian covers approximately \\(7.96\\%\\) of all directions around a point.\n\nThe definition is independent of the chosen radius. For a fixed set of directions, increasing the radius multiplies the intercepted spherical area by the square of the same factor, leaving \\(A/r^2\\) unchanged."
    },
    {
      "heading": "Relationship to radians and square degrees",
      "text": "The steradian is the three-dimensional counterpart of the radian. A plane angle in radians is defined by an arc length divided by its radius; a solid angle in steradians is defined by a spherical area divided by the square of its radius.\n\nThe alternative name square radian reflects this relationship, but a solid angle is not generally obtained by simply squaring a single plane angle. Its value depends on the geometry of the region of directions.\n\nSolid angles are also expressed in square degrees, especially in astronomy. The exact conversion is\n\n\\[1\\,\\mathrm{sr} =\\left(\\frac{180}{\\pi}\\right)^2 \\text{ square degrees} \\approx3282.80635\\text{ square degrees}.\\]\n\nThe entire sky therefore covers approximately \\(41\\,252.96\\) square degrees. These angular-area units must not be confused with ordinary degrees, which measure plane angles."
    },
    {
      "heading": "Solid angles of cones and small objects",
      "text": "For a right circular cone with half-angle \\(\\alpha\\), measured between its axis and its surface, the enclosed solid angle is\n\n\\[\\Omega=2\\pi(1-\\cos\\alpha)\\,\\mathrm{sr},\\]\n\nwhen the expression in parentheses is evaluated as a pure number. A cone with a half-angle of \\(90^\\circ\\) covers a hemisphere and therefore subtends \\(2\\pi\\,\\mathrm{sr}\\).\n\nA circular cone subtending exactly one steradian has\n\n\\[\\alpha=\\cos^{-1}\\left(1-\\frac{1}{2\\pi}\\right) \\approx32.77^\\circ.\\]\n\nIts full opening angle is therefore approximately \\(65.54^\\circ\\).\n\nFor small \\(\\alpha\\), expressed in radians, the cone formula becomes approximately\n\n\\[\\Omega\\approx\\pi\\alpha^2.\\]\n\nMore generally, a small, nearly planar surface of area \\(A\\), viewed from distance \\(R\\), subtends approximately\n\n\\[\\Omega\\approx\\frac{A\\cos\\theta}{R^2},\\]\n\nwhere \\(\\theta\\) is the angle between the surface normal and the line of sight. This approximation requires the surface’s dimensions to be small compared with its distance from the observation point. It shows that angular extent depends on orientation as well as size and distance."
    },
    {
      "heading": "Mathematical representation",
      "text": "Using spherical coordinates, with polar angle \\(\\theta\\) and azimuthal angle \\(\\phi\\), the differential solid-angle element is\n\n\\[\\mathrm{d}\\Omega=\\sin\\theta\\,\\mathrm{d}\\theta\\,\\mathrm{d}\\phi.\\]\n\nHere the angular variables are expressed in radians, and the resulting solid angle is conventionally reported in steradians. The solid angle of a region of directions is obtained by an integral over that region:\n\n\\[\\Omega=\\iint\\sin\\theta\\,\\mathrm{d}\\theta\\,\\mathrm{d}\\phi.\\]\n\nThe factor \\(\\sin\\theta\\) accounts for the changing area represented by equal coordinate increments at different polar angles. In particular, a product of two angular widths is not a general exact formula for solid angle, although it can approximate a small field near its centre when suitable local coordinates are used."
    },
    {
      "heading": "Status within the SI",
      "text": "The steradian is a coherent SI derived unit with a special name and symbol. Its expression in terms of the metre is\n\n\\[\\mathrm{sr}=\\frac{\\mathrm{m}^2}{\\mathrm{m}^2}=1.\\]\n\nIt is therefore a unit for a quantity of dimension one. This does not mean that solid angle is physically interchangeable with every other dimensionless quantity. Retaining the symbol \\(\\mathrm{sr}\\) identifies the kind of quantity involved and distinguishes, for example, power per unit solid angle from total power.\n\nIn 1960, the General Conference on Weights and Measures placed the radian and steradian in a category called supplementary units. In 1995, that category was abolished, and both were classified as dimensionless derived units whose special names and symbols may be used where appropriate."
    },
    {
      "heading": "Applications",
      "text": "Radiometry and photometry\n\nIn radiometry, radiant intensity is radiant power per unit solid angle:\n\n\\[I_{\\mathrm e}=\\frac{\\mathrm{d}\\Phi_{\\mathrm e}}{\\mathrm{d}\\Omega}.\\]\n\nIts SI unit is the watt per steradian, \\(\\mathrm{W\\,sr^{-1}}\\). For an ideal point source radiating equally in every direction, radiant intensity equals total radiant power divided by \\(4\\pi\\,\\mathrm{sr}\\).\n\nIn photometry, luminous intensity is luminous flux per unit solid angle. The candela and lumen are related by\n\n\\[1\\,\\mathrm{lm}=1\\,\\mathrm{cd\\,sr}.\\]\n\nA source with a uniform luminous intensity of one candela therefore emits one lumen into a solid angle of one steradian.\n\nRadiance additionally accounts for projected emitting area and is expressed in \\(\\mathrm{W\\,m^{-2}\\,sr^{-1}}\\). This distinction is important in optics and radiative transfer, where radiation varies with both position and direction.\n\nAstronomy and particle measurements\n\nAstronomical surveys describe sky coverage in steradians or square degrees. A telescope’s field of view is an angular area, distinct from its aperture area and angular resolution.\n\nIn scattering experiments, the differential cross section \\(\\mathrm{d}\\sigma/\\mathrm{d}\\Omega\\) describes scattering into particular directions and commonly has units of area per steradian. Detector acceptance may likewise be expressed as a solid angle, although actual detection efficiency can also depend on direction, particle energy, and instrument response."
    }
  ],
  "links": [
    "international-system-of-units",
    "radian",
    "astronomy",
    "integral",
    "metre",
    "general-conference-on-weights-and-measures",
    "candela",
    "lumen",
    "optics",
    "radiative-transfer",
    "telescope",
    "scattering"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}