{
  "id": "standard-atomic-weight",
  "title": "Standard Atomic Weight",
  "lang": "en",
  "source_lang": "en",
  "summary": "Standard atomic weight is a recommended relative atomic mass for an element in normal terrestrial materials, expressed as a value with uncertainty or an interval.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Standard relative atomic mass"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/standard-atomic-weight/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/standard-atomic-weight/",
      "json": "https://aiwiki.page/zh/standard-atomic-weight.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Standard atomic weight is the recommended value, or interval of values, of the relative atomic mass of a chemical element in normal terrestrial materials. It reflects both the masses of the element’s isotopes and their relative abundances. Standard atomic weights are evaluated by the Commission on Isotopic Abundances and Atomic Weights (CIAAW), a commission of the International Union of Pure and Applied Chemistry (IUPAC), and provide the basis for most atomic weights displayed in the periodic table. They are dimensionless quantities, not masses expressed in grams or atomic mass units."
    },
    {
      "heading": "Definition and mathematical basis",
      "text": "The atomic weight of an element in a particular sample is the mean mass of its atoms divided by the atomic mass constant, \\(m_{\\mathrm u}\\). This constant is defined as one twelfth of the mass of a free, neutral carbon-12 atom at rest in its ground state.\n\nFor an element \\(E\\) in a sample \\(P\\),\n\n\\[A_{\\mathrm r}(E,P) = \\frac{\\overline{m}(E,P)}{m_{\\mathrm u}} = \\sum_i x_i(P)\\,A_{\\mathrm r}({}^{A_i}E),\\]\n\nwhere:\n\n- \\(x_i(P)\\) is the amount fraction of isotope \\(i\\) in the sample;\n- \\(A_{\\mathrm r}({}^{A_i}E)\\) is that isotope’s relative atomic mass;\n- \\(\\sum_i x_i(P)=1\\).\n\nThe isotope amount fractions are fractions of the number of atoms, not fractions of the sample’s mass.\n\nThe standard atomic weight, commonly written \\(A_{\\mathrm r}^{\\circ}(E)\\), is an evaluated recommendation intended to apply to normal terrestrial materials rather than to one specified sample. Depending on the element, it is reported as either a single value with an associated uncertainty or an interval.\n\nThe reference isotope carbon-12 has a relative atomic mass of exactly 12. Nevertheless, the standard atomic weight of carbon is not exactly 12, because ordinary carbon also contains carbon-13 and traces of carbon-14."
    },
    {
      "heading": "Why atomic weights vary",
      "text": "Atoms of an element share the same atomic number, but different isotopes contain different numbers of neutrons. Their masses therefore differ. An element’s atomic weight depends on the proportions in which these isotopes occur.\n\nThose proportions are not always identical throughout Earth. Physical, chemical, and biological processes can separate isotopes slightly, a phenomenon called isotope fractionation. For example:\n\n- Evaporation and condensation alter the isotope composition of water.\n- Photosynthesis can produce differences in carbon isotope composition among biological materials.\n- Geological processes can separate isotopes among minerals, fluids, and gases.\n- Radioactive decay can change isotope abundances by producing daughter isotopes.\n\nConsequently, increased precision in measurement does not necessarily reveal one universal atomic weight for every occurrence of an element. Instead, it may reveal genuine differences between samples.\n\n“Normal terrestrial materials” is a technical qualification. It generally excludes materials with deliberately modified isotope compositions, extraterrestrial materials, and exceptional occurrences with anomalous isotope compositions. A standard atomic weight should therefore not automatically be applied to an isotope-enriched reagent, a meteorite, or a highly unusual mineral."
    },
    {
      "heading": "Single values and intervals",
      "text": "Single values with uncertainty\n\nMany standard atomic weights are written as a numerical value followed by an uncertainty in parentheses. The parenthetical digits refer to the final digits of the stated value. For example, a value written as \\(a.bcde(f)\\) has an associated uncertainty of \\(0.000f\\).\n\nFor elements whose normal terrestrial material consists essentially of one isotope, the standard atomic weight is determined primarily by the measured mass of that isotope. For other elements, the recommendation also incorporates knowledge of isotope abundances and their variability.\n\nHaving only one naturally occurring isotope does not generally make an atomic weight an exact integer. Apart from the carbon-12 reference, isotope masses are measured quantities, and nuclear binding energy contributes to their departures from integer values.\n\nInterval standard atomic weights\n\nFor some elements, documented natural variation is sufficiently important that the standard atomic weight is expressed as an interval:\n\n\\[A_{\\mathrm r}^{\\circ}(E)=[a,b].\\]\n\nExamples include:\n\nElement | Standard atomic-weight interval\n[[hydrogen | Hydrogen]]\nCarbon | \\([12.0096,\\;12.0116]\\)\nChlorine | \\([35.446,\\;35.457]\\)\n\nThese intervals represent assessed bounds for atomic weights in normal terrestrial materials. They are not ordinary statistical confidence intervals, and they do not imply that every value within the interval is equally probable. Nor is the midpoint necessarily the best value for a particular sample.\n\nInterval notation explicitly recognizes variability in nature rather than treating all differences as measurement uncertainty. IUPAC introduced interval standard atomic weights for ten elements in its 2009 evaluation.\n\nAbridged and conventional values\n\nEducational tables and routine calculations often require a single, manageable number. Abridged tables therefore give rounded values with appropriately reduced precision. Conventional single values may also be provided for elements whose full standard atomic weights are intervals.\n\nSuch values are practical representations of the evaluated information. They should not be interpreted as exact constants or as measurements of every possible sample."
    },
    {
      "heading": "Example: chlorine",
      "text": "Ordinary chlorine consists predominantly of chlorine-35 and chlorine-37. Their relative atomic masses are approximately 34.96885 and 36.96590, respectively.\n\nFor a sample containing isotope amount fractions of 0.7576 and 0.2424,\n\n\\[A_{\\mathrm r}(\\mathrm{Cl},P) \\approx 0.7576(34.96885)+0.2424(36.96590) \\approx 35.453.\\]\n\nThis value describes that isotope mixture. Another normal sample with slightly different isotope abundances can have a different atomic weight while remaining within chlorine’s standard interval.\n\nThe familiar value near 35.45 therefore does not mean that an individual chlorine atom has a mass number of 35.45. Individual chlorine-35 and chlorine-37 atoms have integer mass numbers, whereas the sample’s atomic weight is an isotope-weighted average."
    },
    {
      "heading": "Measurement and evaluation",
      "text": "Standard atomic weights are based on two principal kinds of evidence:\n\n- Isotope-mass measurements, which establish the relative masses of individual isotopes.\n- Isotope-abundance measurements, which establish their proportions in materials.\n\nMass spectrometry is central to both activities. Reliable abundance measurements require attention to instrumental discrimination between isotopes, chemical preparation, contamination, and calibration. Evaluators also consider whether the materials studied adequately represent normal terrestrial occurrences.\n\nA revised standard atomic weight may result from improved measurements, better calibration, revised isotope masses, or the discovery of a wider natural range of isotope compositions. These revisions generally improve the description of the element; they do not indicate that the element’s isotopes have changed their intrinsic masses."
    },
    {
      "heading": "Relationship to molar mass",
      "text": "Standard atomic weights connect microscopic isotope properties with macroscopic chemical calculations. For an element in a specified sample, its molar mass is\n\n\\[M(E,P)=A_{\\mathrm r}(E,P)\\,M_{\\mathrm u},\\]\n\nwhere \\(M_{\\mathrm u}=N_{\\mathrm A}m_{\\mathrm u}\\) is the molar mass constant and \\(N_{\\mathrm A}\\) is the Avogadro constant.\n\nFor routine stoichiometric calculations, a standard atomic weight of approximately 35.45 corresponds to a molar mass of approximately \\(35.45\\ \\mathrm{g\\,mol^{-1}}\\). This numerical correspondence is sufficient for most laboratory work.\n\nThere is, however, a metrological distinction. Before the 2019 revision of the International System of Units, \\(M_{\\mathrm u}\\) was exactly \\(1\\ \\mathrm{g\\,mol^{-1}}\\). Under the revised SI, the Avogadro constant is exact, whereas the atomic mass constant in kilograms is experimentally determined. The molar mass constant is therefore no longer exactly \\(1\\ \\mathrm{g\\,mol^{-1}}\\), although it remains extremely close to that value.\n\nAtomic weights are dimensionless; molar masses have units of mass per mole. Confusing the two can obscure both the definition and the interpretation of uncertainties."
    },
    {
      "heading": "Historical development",
      "text": "Early atomic weights were inferred largely from chemical combining ratios. Because absolute atomic masses were inaccessible, chemists used relative scales, often assigning a reference value to hydrogen or oxygen.\n\nThe discovery of isotopes showed that the atomic weight of an element could depend on isotope composition. It also exposed a difference between two oxygen-based scales: chemists used natural oxygen as their reference, whereas physicists used the isotope oxygen-16. Natural variation in oxygen isotope abundances further complicated the comparison.\n\nThe unified carbon-12 scale was adopted internationally in 1960–1961, establishing carbon-12 as the common reference for chemical and physical atomic-mass measurements. Subsequent improvements in mass spectrometry made it increasingly important to distinguish measurement limitations from genuine natural variability, eventually leading to interval standard atomic weights."
    },
    {
      "heading": "Applications and limitations",
      "text": "Standard atomic weights support the calculation of formula masses, molar masses, mass fractions, reaction quantities, and concentrations throughout chemistry. They are particularly useful when the isotope composition of a material is unknown but can reasonably be treated as normal.\n\nTheir limitations become important when high accuracy or unusual materials are involved:\n\n- Isotopically enriched or depleted materials: The sample’s measured or specified isotope composition is needed instead of the ordinary standard value.\n- High-precision work: Natural isotope variation can exceed the uncertainty acceptable for the calculation.\n- Extraterrestrial materials: Isotope abundances may fall outside terrestrial recommendations.\n- Elements without standard atomic weights: Many radioactive elements lack a characteristic isotope composition in normal terrestrial materials.\n\nSome radioactive elements, including thorium, protactinium, and uranium, nevertheless have standard atomic weights because their relevant terrestrial isotope compositions can be characterized. Thus, the presence of radioactivity alone does not determine whether a standard atomic weight can be assigned.\n\nFor elements without a standard atomic weight, periodic tables often display a selected isotope’s mass number in square brackets. That integer is not an average atomic weight and should not be confused with a bracketed standard atomic-weight interval."
    }
  ],
  "links": [
    "relative-atomic-mass",
    "chemical-element",
    "isotope",
    "periodic-table",
    "atom",
    "carbon",
    "atomic-number",
    "earth",
    "water",
    "photosynthesis",
    "radioactivity",
    "nuclear-binding-energy",
    "hydrogen",
    "measurement-uncertainty",
    "mass-number",
    "mass-spectrometry",
    "calibration",
    "molar-mass",
    "avogadro-constant",
    "stoichiometry",
    "international-system-of-units",
    "mole",
    "chemistry"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}