{
  "id": "solubility",
  "title": "Solubility",
  "lang": "en",
  "source_lang": "en",
  "summary": "Solubility is the equilibrium composition of a solution in contact with a specified solute phase under defined conditions.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Equilibrium solubility"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/solubility/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/solubility/",
      "json": "https://aiwiki.page/zh/solubility.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Solubility is the composition of a saturated solution of a substance in a specified solvent at a given temperature and pressure. In the familiar case of a solid dissolving in a liquid, it describes how much material can enter the liquid before the solution reaches equilibrium with the solid. The concept also applies to gases in liquids, liquids in other liquids, and components dissolved in solid materials. Solubility is therefore not an intrinsic property of an isolated substance: it characterizes a particular combination of substances, phases, and physical conditions.\n\nSolubility governs the formation of minerals, the transport of pollutants, the availability of dissolved gases to organisms, and many chemical manufacturing and separation processes. Its explanation joins molecular interactions with thermodynamics, while its measurement requires careful distinction between equilibrium composition and the speed of dissolution. Temperature, pressure, acidity, dissolved salts, chemical reactions, and the structure of the dissolving phase can all change the observed result."
    },
    {
      "heading": "Definition, saturation, and reporting conventions",
      "text": "A solution is saturated when its composition is in thermodynamic equilibrium with a specified phase of the dissolving substance. For a crystalline solid in a liquid, dissolution and deposition continue microscopically, but there is no net transfer between the phases. An undersaturated solution can dissolve additional material from that phase. A supersaturated solution contains more dissolved material than is stable at equilibrium and can persist temporarily if formation or growth of the separating phase is slow.\n\nThe phase specification matters. Different crystal structures of the same compound can have different solubilities, as can an anhydrous solid and its hydrated forms. A reported value is consequently incomplete unless it identifies the solvent, temperature, pressure when relevant, and the phase in equilibrium with the solution. For substances that undergo acid–base reactions, complex formation, or other transformations, the solution’s chemical composition must also be specified. “Solubility in water” can otherwise conceal differences caused by acidity or atmospheric gases.\n\nSeveral quantities express solubility. Molar concentration gives amount of solute per volume of solution, commonly in moles per litre. Molality gives amount of solute per mass of solvent, commonly in moles per kilogram. Mass fraction and mole fraction are dimensionless composition measures; mass concentration gives mass per solution volume. Values in grams per 100 grams of solvent are not interchangeable with grams per 100 grams of solution. Volume-based measures also vary with thermal expansion, even without a change in the relative amounts of solute and solvent.\n\nFor example, the solubility of sodium chloride near \\(25\\,^\\circ\\mathrm{C}\\) is approximately 36 grams per 100 grams of water. The corresponding saturated solution contains about 26% sodium chloride by mass, not 36%, because the solution includes both salt and water. Conversion among concentration scales may require the solution’s density and the solute’s molar mass.\n\nSolubility must also be distinguished from chemical consumption of a material. Copper dissolving in an oxidizing acid is transformed through a reaction, rather than simply reaching equilibrium between metallic copper and neutral dissolved copper atoms. Reactive dissolution can still be described quantitatively, but its equilibrium involves all relevant reactants and products. In such systems, the maximum dissolved concentration depends on the available reagents and their chemical potentials, not merely on the identity of the liquid."
    },
    {
      "heading": "Molecular interactions and thermodynamic foundations",
      "text": "Dissolving a substance changes interactions throughout the system. Particles must leave their original environment, the solvent must reorganize, and new solute–solvent interactions form. For an ionic crystal, separating oppositely charged ions requires energy, whereas surrounding them with polar solvent molecules stabilizes them. This stabilization is called solvation, or hydration when the solvent is water. The balance cannot generally be inferred from any one interaction alone.\n\nWater molecules orient around dissolved ions through electrostatic interactions. Molecular solutes may interact with water through a hydrogen bond, dipole interactions, or dispersion forces. Hydrocarbons interact with water less favorably than many oxygen-containing compounds do, but their low aqueous solubility is not explained simply by the absence of attraction. Reorganization of water around nonpolar surfaces and the statistical effects associated with the hydrophobic effect also contribute. The familiar rule “like dissolves like” is a qualitative guide, not a quantitative law.\n\nThe fundamental equilibrium condition is equality of the solute’s chemical potential in the coexisting phases. For a solid solute and its dissolved form,\n\n\\[\\mu_{\\mathrm{solid}}=\\mu_{\\mathrm{solution}}.\\]\n\nFor the dissolved component,\n\n\\[\\mu_{\\mathrm{solution}}=\\mu^\\circ+RT\\ln a,\\]\n\nwhere \\(R\\) is the gas constant, \\(T\\) is absolute temperature, and \\(a\\) is thermodynamic activity. Activity expresses the effective thermodynamic concentration relative to a defined standard state. In dilute solutions it may be approximated by a normalized concentration, but concentrated electrolytes and strongly interacting mixtures often require substantial corrections through an activity coefficient.\n\nAt constant temperature and pressure, spontaneous changes lower the system’s Gibbs free energy. The relation\n\n\\[\\Delta G=\\Delta H-T\\Delta S\\]\n\nconnects the free-energy change with enthalpy and entropy. Mixing often provides an entropy contribution favoring dissolution, while changes in intermolecular interactions can favor or oppose it. Nevertheless, “dissolution increases disorder” is not a universal explanation: solvent ordering, ion association, and molecular organization can substantially alter the entropy change.\n\nA solid’s cohesion is as important as its affinity for the solvent. Two compounds with similar functional groups can have very different solubilities because their crystals differ in packing efficiency and interaction strength. A molecule may interact favorably with water yet remain poorly soluble because its crystal is especially stable. Quantitative explanations therefore require both the free energy of the initial phase and the free energy of the dissolved state."
    },
    {
      "heading": "Effects of temperature and pressure",
      "text": "Temperature changes solubility by changing the relative free energies of the coexisting phases. Many solids become more soluble in water as temperature rises, but this is not a universal rule. Sodium chloride has only a modest temperature dependence over ordinary laboratory conditions, whereas potassium nitrate shows a much larger increase. Some substances exhibit decreasing solubility over particular temperature intervals, and others show changes in trend when the stable solid phase changes.\n\nFor a dissolution equilibrium described by a dimensionless equilibrium constant \\(K\\), the van ’t Hoff relation is\n\n\\[\\frac{d\\ln K}{dT}=\\frac{\\Delta H^\\circ}{RT^2}.\\]\n\nIf the standard dissolution enthalpy is approximately constant, an endothermic dissolution equilibrium shifts toward larger \\(K\\) at higher temperature, while an exothermic one shifts in the opposite direction. Applying this relation directly to a measured concentration requires care: activity coefficients, solvent properties, and dissolved species can themselves change with temperature. For salts producing several ions, the equilibrium constant is also not simply equal to molar solubility.\n\nSolubility curves may contain bends or discontinuities associated with a phase transition. Sodium sulfate provides a classic example: near \\(32.4\\,^\\circ\\mathrm{C}\\), the equilibrium solid in contact with an aqueous saturated solution changes between the decahydrate and anhydrous forms. The measured curve reflects the stability of different solids, not merely a smooth change in one dissolution process. Heating can also alter the solvent composition through evaporation unless measurements are made under controlled conditions.\n\nPressure has a relatively small effect on many solid–liquid equilibria at modest pressures because condensed phases are only slightly compressible. Thermodynamically,\n\n\\[\\left(\\frac{\\partial\\ln K}{\\partial P}\\right)_T =-\\frac{\\Delta V^\\circ}{RT},\\]\n\nwhere \\(\\Delta V^\\circ\\) is the standard reaction volume. Increasing pressure favors the side with the smaller volume. At high pressures, such as those in deep geological environments, changes in solvent density, dielectric behavior, and solid structure can make pressure effects substantial.\n\nA further distinction is necessary between changing the total pressure and changing the partial pressure of a dissolving gas. Adding an inert gas above a liquid may have little effect on a solid’s solubility under ordinary conditions. Increasing the partial pressure of a soluble gas, by contrast, directly changes its chemical potential and can strongly increase its dissolved concentration. Temperature and pressure effects therefore depend on the identities and phases involved, not on a single general rule."
    },
    {
      "heading": "Gas solubility and Henry’s law",
      "text": "For a gas dissolved at sufficiently low concentration, the dissolved amount is often proportional to the gas’s partial pressure above the liquid. This relationship is Henry’s law, associated with William Henry’s work published in 1803. One common convention is\n\n\\[c=k_{\\mathrm H}p,\\]\n\nwhere \\(c\\) is dissolved concentration, \\(p\\) is partial pressure, and \\(k_{\\mathrm H}\\) is a temperature-dependent proportionality coefficient. Other conventions define the coefficient through \\(p=Hc\\), or use mole fraction rather than concentration. A numerical Henry coefficient is therefore meaningful only with its equation, units, solvent, and temperature.\n\nHenry’s law describes a limiting behavior rather than an unrestricted proportionality. At high gas pressures, fugacity replaces partial pressure in rigorous treatments because the gas no longer behaves as an ideal gas. At appreciable dissolved concentrations, interactions among solute molecules can also produce deviations. The law applies to a specified dissolved species; chemical reactions can make the total amount absorbed differ greatly from the amount of physically dissolved molecular gas.\n\nCarbon dioxide illustrates this distinction. Molecular carbon dioxide enters water and participates in equilibria involving carbonic acid, bicarbonate, and carbonate. In an alkaline solution, conversion into these other species permits absorption of far more total inorganic carbon than a calculation based only on molecular carbon dioxide would predict. Similarly, ammonia is protonated to ammonium in acidic solutions. Gas absorption equipment must therefore distinguish physical solubility from absorption enhanced by chemical reaction.\n\nMany gases, including oxygen and nitrogen, become less soluble in water as temperature increases near ordinary environmental temperatures. Fresh water in equilibrium with air near sea-level atmospheric pressure contains approximately 9 milligrams of dissolved oxygen per litre at \\(20\\,^\\circ\\mathrm{C}\\), compared with roughly 14.6 milligrams per litre at \\(0\\,^\\circ\\mathrm{C}\\). Actual concentrations in a river or lake also depend on biological production and consumption, mixing, and the rate of exchange with the atmosphere. Equilibrium solubility is a reference value, not a guarantee of the observed concentration.\n\nDissolved salts commonly reduce the solubility of gases, an effect called salting out. Consequently, seawater generally holds less oxygen than fresh water at the same temperature and oxygen partial pressure. Gas solubility also underlies carbonation: elevated carbon dioxide pressure establishes a higher dissolved concentration in a sealed drink. Opening the container lowers the gas pressure, creating supersaturation; bubbles then form and grow where suitable nucleation sites are available. The subsequent escape rate is controlled by mass transfer as well as by the new equilibrium state."
    },
    {
      "heading": "Ionic solids, acidity, and coupled equilibria",
      "text": "For a sparingly soluble ionic solid, equilibrium is often expressed using a solubility product. If a solid \\(\\mathrm{M}_a\\mathrm{X}_b\\) dissolves according to\n\n\\[\\mathrm{M}_a\\mathrm{X}_b(s) \\rightleftharpoons a\\,\\mathrm{M}+b\\,\\mathrm{X},\\]\n\nits thermodynamic solubility product is\n\n\\[K_{\\mathrm{sp}}=a_{\\mathrm M}^{\\,a}a_{\\mathrm X}^{\\,b}.\\]\n\nHere the symbols inside the product are ionic activities; the activity of a pure, specified solid is conventionally unity. This equilibrium constant must not be confused with solubility expressed as a concentration.\n\nFor silver chloride in sufficiently dilute water, neglecting other reactions and taking activity coefficients as approximately one, dissolution produces equal concentrations of silver and chloride ions. Its molar solubility is then approximately \\(\\sqrt{K_{\\mathrm{sp}}}\\), with concentration standard-state factors understood. For a salt such as calcium fluoride, dissolution produces twice as much fluoride as calcium, and the corresponding concentration product is \\(4s^3\\), where \\(s\\) is molar solubility. The relationship between \\(K_{\\mathrm{sp}}\\) and solubility thus depends on stoichiometry.\n\nAdding an ion already present in the dissolution equilibrium often lowers solubility: this is the common-ion effect. Chloride added to a dilute silver chloride system reduces the free silver-ion activity required for saturation. Yet sufficiently concentrated chloride can form soluble silver–chloride complexes and increase total dissolved silver. Total analytical concentration and free-ion activity are therefore different quantities. Coordination chemistry is often essential for interpreting apparently anomalous solubility behavior.\n\nAcidity is especially important for solids whose dissolved constituents can accept or release protons. Carbonates commonly dissolve more readily in acidic solutions because protonation removes carbonate ions from the free-ion pool. Metal hydroxides also often become more soluble as pH decreases. Some amphoteric hydroxides dissolve both in acidic conditions and in strongly alkaline conditions, where soluble hydroxo complexes become important. These patterns arise from coupled equilibria rather than a change in a fixed solubility product at constant temperature.\n\nFor a monoprotic weak acid with neutral solid phase, an ideal dilute-solution approximation gives\n\n\\[S_{\\mathrm{tot}}=S_0\\left(1+10^{\\mathrm{pH}-\\mathrm{p}K_a}\\right),\\]\n\nwhere \\(S_0\\) is the intrinsic solubility of the neutral form. This expression assumes that the neutral solid remains the controlling phase and that activity and competing-reaction effects are negligible. Salt precipitation, ion pairing, or a change of solid form can invalidate it. More generally, solubility calculations require simultaneous solution of equilibrium relationships, material balances, and electrical charge balance."
    },
    {
      "heading": "Liquid mixtures, polymers, and organized solutions",
      "text": "When two liquids mix in all proportions to form a single equilibrium liquid phase, they are described as completely miscible. Water and ethanol are a familiar example. Other liquid pairs are only partially miscible: each dissolves a limited amount of the other, and intermediate overall compositions separate into two liquid phases. Miscibility is therefore closely related to solubility, but emphasizes the phase behavior across the full composition range rather than the concentration of a minor component.\n\nThe thermodynamic criterion is the free energy of mixing as a function of composition. For an ideal binary mixture,\n\n\\[\\Delta G_{\\mathrm{mix}} =RT\\left(n_1\\ln x_1+n_2\\ln x_2\\right),\\]\n\nwhere \\(n_i\\) and \\(x_i\\) denote amounts and mole fractions. Real mixtures have an additional excess free-energy contribution arising from nonideal interactions. If two phases together have lower free energy than a homogeneous mixture of the same overall composition, phase separation occurs. A phase diagram shows the compositions and temperatures at which one or more phases are stable.\n\nSome mixtures become fully miscible above an upper critical solution temperature, while others become less miscible on heating and exhibit a lower critical solution temperature. Still others display more complicated closed miscibility regions. These behaviors reflect competing energetic and entropic effects, including temperature-dependent association and hydrogen bonding. Near a critical point, the compositional difference between the two liquid phases vanishes and large concentration fluctuations can occur.\n\nPolymer solutions require particular treatment because one chain contains many connected molecular units. The entropy gain from mixing a polymer with a solvent is smaller per structural unit than for two small-molecule liquids. Consequently, modestly unfavorable interactions can produce phase separation. Flory–Huggins theory, developed in the early 1940s by Paul Flory and Maurice Huggins, describes this balance using a lattice model and an interaction parameter. Polymer molecular mass, chain architecture, and crystallinity further influence dissolution. A chemically cross-linked polymer network generally swells rather than dissolves as separate chains.\n\nSurfactants complicate the distinction between molecular dissolution and incorporation into dispersed structures. Above the relevant aggregation threshold, many surfactants form micelles with environments that accommodate poorly water-soluble compounds. The total concentration carried by the aqueous preparation can then exceed the concentration of freely dissolved molecules. Emulsions, colloidal particles, and molecular solutions must likewise be distinguished: visual clarity alone does not establish molecular dissolution. In proteins, changes in charge, salt concentration, and intermolecular attraction can cause aggregation or phase separation, making the reported “solubility” dependent on how the dissolved and aggregated fractions are operationally separated."
    },
    {
      "heading": "Dissolution rate, supersaturation, and solid form",
      "text": "Equilibrium solubility determines the saturation limit, whereas dissolution rate describes how quickly a system approaches it. A highly soluble solid may dissolve slowly if it has little exposed surface, is poorly wetted, or is surrounded by a stagnant liquid layer. Conversely, a small quantity of a sparingly soluble powder may disappear rapidly when the liquid volume is large enough to remain undersaturated. Stirring usually accelerates equilibration without changing the equilibrium solubility.\n\nA widely used mass-transfer description, related to the Noyes–Whitney equation introduced in 1897, is\n\n\\[\\frac{dm}{dt}=\\frac{DA}{h}(c_s-c).\\]\n\nHere \\(D\\) is a diffusion coefficient, \\(A\\) is exposed surface area, \\(h\\) is an effective boundary-layer thickness, \\(c_s\\) is concentration at the solid surface, and \\(c\\) is the bulk concentration. The model assumes that interfacial equilibrium is established rapidly compared with transport through the boundary layer. Surface reactions, changing particle geometry, and porous structures may require more elaborate descriptions.\n\nSupersaturation can be generated by cooling a saturated solution, evaporating solvent, mixing with a poorer solvent, or chemically producing a sparingly soluble species. Its persistence depends on the barriers to nucleation and crystal growth. Small clusters gain bulk free-energy stability by forming a new phase but incur an energetic cost in creating an interface. Below a critical cluster size, the interfacial cost can dominate. Dust, vessel surfaces, and deliberately added seed crystals can lower the effective barrier and initiate crystallization.\n\nCrystal structure also changes the equilibrium itself. Different polymorphs have different chemical potentials, so a metastable form generally has a higher solubility than the thermodynamically stable form under the same conditions. Amorphous material often has a higher chemical potential than its crystalline counterpart and may generate elevated dissolved concentrations. During measurement it can crystallize, causing concentration to rise initially and later decline. An apparent plateau over a short observation period need not represent equilibrium with the stable phase.\n\nVery small particles can show increased equilibrium solubility because surface curvature raises their chemical potential. Under simplifying assumptions for spherical particles, an Ostwald–Freundlich relation is\n\n\\[\\ln\\left(\\frac{S_r}{S_\\infty}\\right) =\\frac{2\\gamma V_m}{rRT},\\]\n\nwhere \\(\\gamma\\) is interfacial energy, \\(V_m\\) is solid molar volume, and \\(r\\) is particle radius. This curvature effect becomes important at sufficiently small sizes and must be separated from the much more general acceleration of dissolution caused by increased surface area."
    },
    {
      "heading": "Experimental determination and data quality",
      "text": "A conventional equilibrium measurement places an excess of the specified solid in contact with a known solvent and allows the system to equilibrate at controlled temperature. The liquid is then separated from undissolved material and analyzed. Excess solid is important because it provides the phase with which the solution must equilibrate. If all the solid disappears, the experiment establishes only that its solubility exceeds the concentration prepared.\n\nEquilibration time varies from minutes to weeks or longer, depending on dissolution kinetics, phase transformations, and transport. Agreement between measurements approached from undersaturation and supersaturation provides stronger evidence of equilibrium than a single time point. Characterizing the remaining solid is equally important: the initially supplied phase may hydrate, lose solvent, or transform into another polymorph. X-ray diffraction and thermal analysis are commonly used for this purpose.\n\nThe analytical method depends on the substance and concentration range. Gravimetry can determine nonvolatile residues after solvent removal, while titration measures components through known chemical reactions. Spectroscopy and chromatography are widely used for molecular compounds; elemental methods quantify dissolved metals and other elements. Gas solubility can be measured through equilibrium headspace analysis, pressure changes, or direct dissolved-gas measurements. Each method must distinguish the species actually detected from the total concentration claimed.\n\nSampling can disturb the equilibrium being measured. Cooling a hot saturated solution may precipitate solute before analysis; warming a gas-containing sample may drive gas loss. Filtration can remove colloids but may also adsorb the analyte, while very fine particles can pass through filters and inflate an apparent dissolved concentration. Volatile solvents require control of evaporation, and compounds present at low concentrations may be lost to vessel walls. Light sensitivity, oxidation, and hydrolysis can introduce additional changes.\n\nRapid screening methods often measure a kinetic rather than an equilibrium solubility. For example, adding a concentrated solution in a miscible organic solvent to water may produce transient supersaturation before precipitation is detected. The outcome depends on mixing, residual cosolvent, observation time, and the detection method. It is useful operational information but is not automatically interchangeable with a thermodynamic value.\n\nHigh-quality reporting therefore includes material identity and purity, solid form, solvent composition, temperature, pressure where relevant, pH, equilibration procedure, analytical method, concentration scale, and measurement uncertainty. Reporting an isolated number without these conditions can make even a precise analytical result unsuitable for comparison or modeling."
    },
    {
      "heading": "Predictive models and the development of solubility theory",
      "text": "The understanding of solubility developed from empirical measurements into a thermodynamic framework during the nineteenth century. Henry’s gas–liquid relationship supplied an early quantitative regularity. The work of J. Willard Gibbs in the 1870s established chemical-potential and phase-equilibrium methods that could treat dissolution alongside other transformations. Subsequent electrolyte theories explained why concentration alone does not adequately describe ionic equilibria.\n\nThe Debye–Hückel theory, introduced in 1923, relates ionic activity coefficients in dilute solutions to electrostatic interactions and ionic strength. Its limiting form works best at very low ionic strength. More concentrated solutions require extensions or different frameworks, including specific-ion interaction treatments and Pitzer models. These models are particularly important for brines, where replacing activities by concentrations can produce large errors in calculated mineral saturation.\n\nFor nonelectrolytes, regular-solution theory and solubility-parameter approaches connect compatibility to cohesive interactions. Hildebrand parameters characterize cohesive energy density, while Hansen parameters separate contributions associated with dispersion, polarity, and hydrogen bonding. Such methods are useful for solvent selection and materials screening, but they do not eliminate the need to account for the dissolving solid’s crystal stability. Similar solute–solvent interactions can coexist with very different lattice free energies.\n\nMore detailed activity-coefficient models include NRTL and UNIQUAC, while group-contribution methods such as UNIFAC estimate mixture behavior from molecular structural groups. Solid–liquid equilibrium calculations can combine a solution model with melting properties. Under restrictive assumptions, including negligible heat-capacity corrections, the relation\n\n\\[\\ln(x_s\\gamma_s) \\approx -\\frac{\\Delta H_{\\mathrm{fus}}}{R} \\left(\\frac{1}{T}-\\frac{1}{T_m}\\right)\\]\n\nconnects saturated mole fraction \\(x_s\\), its activity coefficient \\(\\gamma_s\\), melting temperature \\(T_m\\), and enthalpy of fusion \\(\\Delta H_{\\mathrm{fus}}\\). It shows explicitly why both liquid-phase interactions and solid stability matter.\n\nMolecular simulations estimate solvation free energies from intermolecular interactions, while quantum-chemical solvent models and statistical methods provide complementary approximations. Machine-learning systems can predict solubility from molecular structure and experimental descriptors. Their accuracy depends strongly on the consistency of training measurements, including whether values refer to neutral molecules, ionized species, particular polymorphs, or kinetic screening endpoints. Unknown solid forms, mixed solvents, chemical degradation, and highly nonideal solutions remain substantial sources of uncertainty. A model trained on heterogeneous “water solubility” values may learn a mixture of distinct physical quantities rather than one well-defined equilibrium property."
    },
    {
      "heading": "Roles in natural systems, industry, and biological materials",
      "text": "In natural waters, solubility helps determine which minerals dissolve or precipitate as water moves through rock and soil. Carbon dioxide entering rainwater and soil water promotes carbonate dissolution, contributing to limestone weathering and cave formation. In groundwater, dissolved calcium, magnesium, carbonate species, and other ions reflect coupled reactions with minerals and gases. Water can remain out of equilibrium during rapid flow, however, so a calculated saturation state does not by itself establish that precipitation or dissolution will occur immediately.\n\nA common geochemical measure is the saturation index,\n\n\\[\\mathrm{SI}=\\log_{10}\\left(\\frac{Q}{K}\\right),\\]\n\nwhere \\(Q\\) is an activity product for the relevant mineral reaction and \\(K\\) is its equilibrium constant. A positive value indicates supersaturation with respect to the specified mineral, zero indicates saturation, and a negative value indicates undersaturation. Formation of a new mineral may nevertheless be inhibited by nucleation barriers. Different minerals containing the same element can simultaneously have different saturation states.\n\nIn the ocean, calcium carbonate solubility is central to the preservation and dissolution of shells and sediments. Temperature, pressure, carbonate chemistry, and crystal form all matter; aragonite and calcite have different thermodynamic stabilities. Gas solubility also contributes to exchanges between ocean and atmosphere. Warming generally reduces the physical solubility of carbon dioxide in seawater, while biological processes and carbonate equilibria further modify carbon storage. These interacting processes connect solubility with the carbon cycle rather than reducing ocean carbon uptake to Henry’s law alone.\n\nIndustrial crystallization exploits changes in solubility to recover and purify products. Cooling, evaporation, antisolvent addition, and reactive precipitation create supersaturation, which must be controlled to obtain the desired crystal size and form. Conversely, unwanted precipitation causes scale in boilers, heat exchangers, and desalination equipment. Solvent extraction uses different affinities for two liquid phases to separate components; the distribution of a reacting or ionizing compound may depend strongly on pH and complex formation.\n\nIn pharmaceutical materials, equilibrium solubility, dissolution rate, salt formation, and polymorphism influence formulation behavior. These are distinct from transport across a cell membrane and from subsequent metabolism. A compound can be highly soluble yet cross a membrane poorly, or be poorly soluble while having strong affinity for lipid environments. Biological fluids introduce additional interactions with salts, lipids, and proteins, so simple aqueous solubility is only one part of the relevant physical chemistry.\n\nFor proteins and other biological macromolecules, dissolved concentration depends on molecular conformation, charge, association, and interactions with the surrounding medium. Salt addition can first increase and then decrease protein solubility under different conditions, producing the phenomena termed salting in and salting out. Controlled precipitation is used in biochemical separations, while carefully adjusted supersaturation enables protein crystal growth for structural studies. Here the phase that separates may be a crystal, an amorphous aggregate, or a dense liquid phase, each requiring a distinct equilibrium and kinetic description."
    }
  ],
  "links": [
    "solvent",
    "thermodynamics",
    "thermodynamic-equilibrium",
    "temperature",
    "pressure",
    "acid-base-reaction",
    "molar-concentration",
    "density",
    "molar-mass",
    "solvation",
    "water",
    "ion",
    "hydrogen-bond",
    "hydrophobic-effect",
    "chemical-potential",
    "gas-constant",
    "thermodynamic-activity",
    "standard-state",
    "activity-coefficient",
    "gibbs-free-energy",
    "enthalpy",
    "entropy",
    "equilibrium-constant",
    "phase-transition",
    "henrys-law",
    "ideal-gas",
    "carbon-dioxide",
    "ammonia",
    "oxygen",
    "nitrogen",
    "river",
    "solubility-product",
    "stoichiometry",
    "coordination-chemistry",
    "ph",
    "ethanol",
    "phase-diagram",
    "critical-point",
    "diffusion",
    "nucleation",
    "spectroscopy",
    "chromatography",
    "hydrolysis",
    "measurement-uncertainty",
    "machine-learning",
    "groundwater",
    "ocean",
    "carbon-cycle",
    "desalination",
    "cell-membrane",
    "protein"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}