{
  "id": "silicon-photonics",
  "title": "Silicon Photonics",
  "lang": "en",
  "source_lang": "en",
  "summary": "Silicon photonics integrates optical components on silicon-based chips for communications, computing, sensing, and quantum technologies.",
  "category": "computer-science",
  "subcategory": "hardware",
  "type": "concept",
  "aliases": [
    "Silicon-based photonics"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/silicon-photonics/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/silicon-photonics/",
      "json": "https://aiwiki.page/zh/silicon-photonics.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Silicon photonics is the science and technology of guiding, manipulating, generating, and detecting light using silicon-based integrated devices. It combines optical structures with manufacturing methods derived from the semiconductor industry, allowing waveguides, modulators, detectors, filters, and other components to be fabricated together on a chip. Although silicon is the defining material, practical platforms often incorporate silicon dioxide, germanium, silicon nitride, and compound semiconductors to provide functions that crystalline silicon cannot perform efficiently.\n\nThe technology is especially important for moving information between electronic systems. Optical signals can carry high data rates over distances for which electrical connections become increasingly constrained by attenuation, power consumption, and signal integrity. Silicon photonics brings some of the scale and reproducibility of integrated-circuit manufacturing to these optical links, particularly within and between data centers. It also supports optical sensing, programmable photonic circuits, and experiments in quantum information.\n\nSilicon photonics is not simply a light-based replacement for electronics. Most systems combine optical transmission or processing with electronic control, amplification, and computation. Their performance depends as much on light sources, packaging, thermal stabilization, and manufacturing yield as on individual optical devices."
    },
    {
      "heading": "Historical development and technological scope",
      "text": "Silicon photonics emerged from the intersection of integrated optics and silicon microelectronics. Integrated optics, articulated as a research direction by Stewart E. Miller in 1969, sought to place optical functions on substrates rather than assemble every function from discrete lenses, mirrors, and fibers. Silicon initially appeared an imperfect optical material: it absorbs visible light, emits light inefficiently, and lacks a strong linear electro-optic response in its ordinary crystalline form. Its advantages were instead a mature manufacturing infrastructure and useful transparency at near-infrared telecommunications wavelengths.\n\nAn important early result was the fabrication of silicon-based optical waveguides by Richard Soref and Joseph Lorenzo in the 1980s. In 1987, Soref and Brian Bennett published an influential quantitative treatment of how free electrons and holes change silicon’s optical refractive index and absorption. These effects supplied a practical route to electrically controlled optical devices despite the absence of a strong intrinsic Pockels effect. Silicon-on-insulator materials subsequently enabled tighter optical confinement and more compact circuits than many earlier waveguide structures.\n\nSeveral demonstrations during the 2000s established the field’s practical potential. In 2004, researchers at Intel reported a silicon optical modulator operating above 1 GHz using a metal–oxide–semiconductor capacitor structure. In 2005, optical pumping produced continuous-wave Raman lasing in silicon, with a reverse-biased junction used to reduce losses associated with generated carriers. In 2006, researchers at the University of California, Santa Barbara, and Intel demonstrated an electrically pumped hybrid silicon laser using bonded III–V semiconductor material. These results addressed different limitations; they did not establish that ordinary silicon had become an efficient electrically pumped light emitter.\n\nCommercial development increasingly concentrated on optical transceivers rather than entirely optical computers. Foundry processes, standardized device libraries, and shared fabrication runs made it possible for organizations without their own fabrication facilities to design photonic chips. By the 2010s, silicon photonics had become an established platform for communications research and commercial optical modules.\n\nThe field’s boundaries are broader than its name suggests. Some definitions emphasize crystalline-silicon waveguides and active devices; others include silicon nitride photonics and heterogeneous optical components integrated on silicon substrates. A useful distinction is between the substrate, the material guiding the optical mode, and the materials providing gain, modulation, or detection. A chip can therefore be called a silicon-photonics circuit while containing a laser whose gain medium is indium phosphide and a detector whose absorbing region is germanium. This material diversity is a central feature of the technology, not an exception to it."
    },
    {
      "heading": "Optical properties and waveguide confinement",
      "text": "Silicon’s usefulness in photonics depends strongly on wavelength. At room temperature, crystalline silicon has an indirect electronic bandgap of approximately \\(1.12\\ \\text{eV}\\), corresponding to a wavelength near \\(1.1\\ \\mu\\text{m}\\). Photons with sufficient energy are strongly absorbed through electronic transitions, whereas high-quality silicon can have low intrinsic absorption at longer wavelengths. This makes the telecommunications bands near \\(1.3\\) and \\(1.55\\ \\mu\\text{m}\\) particularly important. The absence of strong interband absorption does not eliminate losses from defects, doping, surfaces, or nonlinear processes.\n\nThe most widely used platform is silicon on insulator, or SOI. A thin crystalline-silicon layer lies above a buried silicon-dioxide layer and a thicker silicon substrate. At \\(1.55\\ \\mu\\text{m}\\), silicon’s refractive index is approximately 3.48, compared with about 1.44 for silica. This large contrast allows strong confinement in an optical waveguide whose transverse dimensions are smaller than the free-space wavelength. A common SOI device layer is about 220 nm thick, although many other thicknesses are used.\n\nFor a guided mode, the propagation constant is\n\n\\[\\beta = \\frac{2\\pi n_{\\mathrm{eff}}}{\\lambda},\\]\n\nwhere \\(n_{\\mathrm{eff}}\\) is the effective refractive index and \\(\\lambda\\) is the vacuum wavelength. Unlike a bulk-material index, \\(n_{\\mathrm{eff}}\\) depends on waveguide width, thickness, surrounding materials, wavelength, and polarization. Changing geometry therefore changes not only confinement but also dispersion, phase delay, and coupling to adjacent structures. Strong confinement permits bends with radii of a few micrometers in suitable designs, enabling dense layouts.\n\nThat same confinement creates sensitivity to fabrication errors. Nanometer-scale changes in width or thickness can shift a resonator’s wavelength or alter an interferometer’s phase. Sidewall roughness scatters light, while doped regions and nearby metals introduce absorption. Silicon waveguides also distinguish strongly between different polarizations; many circuits are optimized for a transverse-electric-like mode rather than accepting arbitrary input polarization.\n\nTemperature and optical intensity provide additional constraints. Silicon’s thermo-optic coefficient near room temperature and telecommunications wavelengths is roughly \\(1.8\\times10^{-4}\\ \\text{K}^{-1}\\), so small temperature changes can substantially shift narrow resonances. At sufficiently high intensity, two-photon absorption creates electron–hole pairs, which produce further absorption and refractive-index changes. Silicon nitride offers lower nonlinear absorption in these bands and often lower propagation loss, but its weaker confinement generally requires larger structures. Platform selection consequently depends on the desired balance among density, loss, wavelength range, optical power, and available active functions."
    },
    {
      "heading": "Passive circuits, interference, and wavelength control",
      "text": "Passive silicon-photonic components route and transform light without directly converting electrical information into an optical signal. Their operation depends on interference, evanescent coupling, diffraction, and resonance. Straight and curved waveguides form the interconnections; splitters divide optical power; couplers transfer it between paths; and filters separate spectral channels. These elements constitute the optical equivalent of a circuit’s wiring and signal-distribution network, although optical phase makes their behavior fundamentally different from ordinary electrical wiring.\n\nA directional coupler places two waveguides close enough for their evanescent fields to overlap. Light periodically transfers between them, with the transferred fraction determined by their separation, interaction length, and propagation constants. Multimode-interference couplers instead exploit self-imaging within a wider waveguide region. They are widely used to make splitters and combiners because suitable designs can provide useful tolerance to wavelength and manufacturing variation.\n\nThe Mach–Zehnder interferometer splits light into two arms and then recombines it. For an ideal balanced device, one output follows\n\n\\[P_{\\mathrm{out}}=\\frac{P_{\\mathrm{in}}}{2} \\left(1+\\cos\\Delta\\phi\\right),\\]\n\nwhere \\(\\Delta\\phi\\) is the phase difference between the arms. A heater, carrier-control junction, or other phase shifter changes this difference. The resulting device can act as a switch, variable attenuator, modulator, or building block in a programmable optical mesh. Its response is typically less spectrally narrow than that of a small ring resonator, but achieving a substantial phase shift often requires a longer active section.\n\nAn optical ring resonator couples a closed waveguide loop to one or more neighboring waveguides. Resonance occurs approximately when\n\n\\[m\\lambda=n_{\\mathrm{eff}}L,\\]\n\nwhere \\(m\\) is an integer and \\(L\\) is the round-trip length. The approximate spacing between adjacent resonances is\n\n\\[\\Delta\\lambda\\approx\\frac{\\lambda^2}{n_gL},\\]\n\nwith \\(n_g\\) the group index. Rings provide compact wavelength filters and can also function as modulators or sensors. Their narrow spectral response, however, makes temperature control and fabrication variation especially important. Higher quality factor increases spectral selectivity but also lengthens photon storage time, constraining switching speed and usable bandwidth.\n\nArrayed-waveguide gratings and cascaded interferometers provide additional methods for separating wavelengths. Together with rings, they enable wavelength-division multiplexing, in which several optical carriers share one waveguide or fiber. Practical designs must account for insertion loss, channel crosstalk, polarization dependence, and spectral drift. A compact filter is not automatically the best system component: a larger structure may reduce calibration requirements or tolerate a wider temperature range. Passive-circuit design therefore balances optical performance against the control circuitry and power needed to maintain that performance."
    },
    {
      "heading": "Electrical modulation and photodetection",
      "text": "A communications transmitter must encode an electrical signal onto light, while a receiver must recover electrical information from that light. In silicon photonics these tasks usually rely on distinct material mechanisms. Silicon commonly provides electrically controlled phase shifting, whereas germanium supplies efficient absorption at telecommunications wavelengths. The resulting devices are integrated with electronic drivers, amplifiers, and control circuits rather than operating as self-contained optical systems.\n\nThe principal silicon modulation mechanism is free-carrier plasma dispersion: changing electron or hole concentration changes both refractive index and absorption. A reverse-biased p–n junction changes the width of its depletion region and therefore the carrier population overlapping the optical mode. Because depletion does not require storing and subsequently removing a large injected carrier population, it supports high-speed operation. Forward-biased injection can produce stronger index changes but introduces carrier-lifetime limitations. Accumulation structures provide another approach, using a thin insulating layer to control charge near an optical mode.\n\nA phase shifter becomes an intensity modulator when placed in an interferometer or resonator. Mach–Zehnder modulators generally trade larger footprint and drive requirements for broad optical bandwidth and less acute wavelength sensitivity. Ring modulators can be much smaller and require less switched capacitance, but their operating wavelength must remain aligned with the optical carrier. Device comparisons often use the voltage–length product \\(V_\\pi L\\), insertion loss, electrical bandwidth, extinction ratio, and energy per transmitted bit. No single figure captures all system trade-offs.\n\nLong modulators can use traveling-wave electrodes, which carry the electrical modulation alongside the optical signal. Their design requires impedance matching, low radio-frequency attenuation, and suitable alignment between electrical and optical propagation speeds. Packaging parasitics may reduce the bandwidth achieved by an otherwise fast device. Heating is useful for setting an operating point or tuning a wavelength, but is generally unsuitable as the primary mechanism for high-speed data modulation.\n\nAt the receiver, a photodiode converts absorbed photons into current. Germanium integrated on silicon is widely used because silicon itself absorbs weakly at the relevant wavelengths. A useful relation for responsivity is\n\n\\[R=\\eta\\frac{q}{h\\nu},\\]\n\nwhere \\(\\eta\\) is external quantum efficiency, \\(q\\) is elementary charge, and \\(h\\nu\\) is photon energy. Detector performance also depends on dark current, capacitance, carrier transit time, and saturation. Avalanche photodiodes add internal gain but require higher bias and introduce multiplication noise. The following transimpedance amplifier is equally important: a low-capacitance detector can enable lower-noise or lower-power electronics, making optical and electronic receiver design tightly interdependent."
    },
    {
      "heading": "Light generation and heterogeneous materials",
      "text": "Efficient light generation is silicon photonics’ most persistent material challenge. Silicon has an indirect bandgap: its conduction-band minimum and valence-band maximum occur at different crystal momenta. Radiative recombination therefore usually requires a phonon as well as a photon to conserve momentum. Competing nonradiative processes make ordinary crystalline silicon a poor electrically pumped gain medium. An efficient laser consequently cannot usually be made merely by adding mirrors and electrical contacts to a conventional silicon waveguide.\n\nThe simplest architecture uses an external laser. Light enters the photonic chip through an optical fiber, an edge coupler, or a grating coupler, and on-chip modulators encode information onto it. This approach separates laser manufacturing and thermal management from the silicon process. A shared source may supply multiple channels, but splitting introduces loss, reflections require control, and a shared source can become a common point of failure. The laser’s electrical power must be included when evaluating the energy efficiency of the complete link.\n\nHybrid and heterogeneous integration bring direct-bandgap III–V materials, such as indium phosphide and its alloys, into close optical contact with silicon. In one approach, a separately manufactured laser die is attached and aligned to the silicon circuit. In another, III–V material is bonded onto a processed silicon wafer and subsequently patterned. The optical mode may extend through both materials: the III–V region provides gain while silicon supplies part of the waveguide and wavelength-selective cavity.\n\nDirect growth of III–V material on silicon seeks to reduce assembly and bonding requirements, but lattice mismatch, thermal-expansion differences, and crystalline defects complicate reliable fabrication. Quantum-dot gain media can reduce sensitivity to some defects, yet material quality, lifetime, coupling efficiency, and manufacturing uniformity remain decisive. A laboratory demonstration of lasing establishes a device mechanism; it does not by itself establish a manufacturable source with acceptable yield and long-term reliability.\n\nOther light-generation mechanisms serve more specialized purposes. Stimulated Raman scattering can provide optical gain in silicon under optical pumping. Nonlinear waveguides can also convert wavelengths or generate correlated photon pairs, but these processes consume pump light and are not substitutes for an electrically efficient source. Integrated optical frequency combs can supply multiple evenly spaced carriers from a pumped resonator, potentially simplifying wavelength-multiplexed systems.\n\nMaterial integration extends beyond lasers. Thin-film lithium niobate can provide a strong linear electro-optic response, while silicon nitride offers low-loss routing and resonators. Germanium supplies absorption, and other materials can add optical gain or specialized modulation. Each additional material also adds interfaces, process steps, thermal constraints, and reliability questions. The practical objective is not maximum material variety, but a combination that provides the required functions at acceptable manufacturing cost."
    },
    {
      "heading": "Fabrication, circuit design, and process variation",
      "text": "Silicon-photonic manufacturing borrows extensively from microelectronics. Photolithography defines patterns, etching creates waveguide boundaries, implantation introduces dopants, and deposition forms dielectric and metallic layers. Additional operations may grow germanium, bond optical materials, or produce specialized couplers. Processing on semiconductor wafers allows many devices to be produced together, but compatibility with CMOS manufacturing does not imply that a complete photonic process is identical to a leading-edge logic process.\n\nOptical devices impose distinctive dimensional requirements. A transistor benefits from scaling in ways that do not transfer directly to waveguides, whose dimensions are constrained by optical wavelength and refractive-index contrast. Smooth sidewalls and controlled film thickness may matter more than the smallest printable feature. Photonic layouts also contain curves, long interaction regions, and structures sensitive to phase errors accumulated over hundreds of micrometers or more. Reducing every dimension is therefore not a universal route to improvement.\n\nDesign normally uses a process design kit containing permitted geometries, fabrication rules, device models, and characterized building blocks. Electronic design automation methods are extended to handle optical connectivity, curved geometry, wavelength dependence, and interactions between electrical and photonic devices. Electromagnetic simulation predicts individual components, while circuit-level models describe larger networks. Thermal simulation is often necessary because a heater or nearby electronic circuit can shift several optical elements simultaneously.\n\nMulti-project wafer runs distribute the cost of a fabrication cycle among many designs. They are important for research and early product development, but constrain participants to the available layer stack and process options. A device demonstrated with a custom material or unusually precise laboratory process may not transfer directly into such a service. Conversely, a standardized foundry component may sacrifice peak performance in exchange for repeatability, test coverage, and compatibility with a broader circuit.\n\nManufacturing variation is especially consequential for resonant devices. Small geometric deviations can shift nominally identical rings to different wavelengths. Circuits may compensate through heaters, carrier tuning, permanent trimming, or feedback control. Compensation itself consumes area, electrical power, and calibration time. Yield must consequently be evaluated at the circuit level: thousands of individually acceptable components do not guarantee that every required combination of losses, phases, and tuning ranges can be achieved.\n\nTesting also differs from conventional electrical wafer probing. Optical signals must enter and leave the wafer, often through surface gratings, while electrical probes supply bias and modulation. Production measurements can include insertion loss, spectral response, detector current, and modulation performance. Test structures help separate process defects from design limitations. Statistical characterization across wafers and fabrication lots is essential for realistic circuit models and for determining how much tuning margin a product requires."
    },
    {
      "heading": "Optical coupling, electronic integration, and packaging",
      "text": "A photonic chip becomes useful only when light, electrical signals, power, and heat can cross its boundaries reliably. Semiconductor packaging is therefore a central part of silicon photonics rather than a final enclosure step. Optical alignment tolerances, fiber attachment, electrical parasitics, thermal gradients, and mechanical stress can determine system performance more strongly than the best measured on-chip device.\n\nCoupling light from a fiber into a submicrometer waveguide requires substantial mode transformation. An edge coupler commonly uses an inverse taper to expand the optical field before it reaches the chip boundary. It can provide broad spectral bandwidth and low loss, but requires access to a suitable chip edge and careful alignment. A grating coupler diffracts light between a surface-mounted fiber and an in-plane waveguide. Surface access simplifies wafer testing and some assembly processes, although wavelength dependence, polarization sensitivity, and back-reflection require attention.\n\nOptical assembly can use active alignment, in which components are moved while transmitted power is monitored, or passive alignment based on mechanical reference features. Active alignment can optimize individual connections but adds time and equipment cost. Passive alignment is attractive for high-volume manufacturing but requires tight control of chip features, package geometry, and component placement. Adhesive stability, thermal cycling, contamination, and fiber strain also affect long-term coupling performance.\n\nElectronic and photonic functions may be fabricated monolithically or on separate dies. Monolithic integration can reduce some interconnect parasitics, but a single process may not optimize both optical devices and advanced logic. Separate-die integration permits each technology to use an appropriate process. Flip-chip bonds, interposers, and chiplet architectures can place drivers and receiver amplifiers close to photonic components, reducing the capacitance and inductance that would arise from longer connections.\n\nCo-packaged optics places optical engines close to a switch or computing device within the same package assembly. Its central purpose is to shorten demanding high-speed electrical paths, not to eliminate electronics. This can reduce electrical-channel losses and equalization requirements, while creating difficult thermal and serviceability constraints. A hot processing die may destabilize nearby resonators or reduce laser reliability. External laser sources can remove some heat and simplify source replacement, but introduce additional optical distribution requirements.\n\nPackaging decisions also affect testability and repair. A defective optical attachment discovered after integrating several expensive dies can reduce overall assembly yield. Known-good-die testing, accessible diagnostic structures, and modular assembly sequences help manage that risk. Practical architectures must therefore account for manufacturing sequence and maintenance as well as bandwidth density. A low-loss coupler or short electrical connection has limited value if the resulting assembly cannot be produced, tested, and operated reliably."
    },
    {
      "heading": "Communications architectures and system-level efficiency",
      "text": "The most established application of silicon photonics is optical communication. A transmitter combines a light source, modulator, and driver; a receiver combines a detector with amplification and signal recovery. Multiple channels may be integrated on one chip and connected to one or several fibers. In data centers, these functions commonly reside in pluggable transceivers, while more tightly integrated optical engines seek to move conversion closer to switching and computing electronics.\n\nIntensity-modulation and direct-detection links encode information in optical power and recover it with a photodiode. Four-level pulse-amplitude modulation represents two bits per symbol before coding overhead, increasing bit rate without requiring an equal increase in symbol rate. Its smaller spacing between signal levels also makes noise, distortion, and bandwidth limitations more consequential. Silicon-photonic modulators and detectors can support such formats, but the driver, amplifier, equalization, and packaging must provide compatible performance.\n\nCoherent communication uses a local-oscillator laser and optical interference to recover amplitude and phase information. Polarization-diverse receivers can separate two polarization channels, while digital processing compensates for transmission impairments. Silicon photonics can integrate optical hybrids, splitters, and balanced photodetectors, reducing the number of discrete optical assemblies. The resulting receiver nevertheless depends on substantial electronic processing; optical integration reduces optical complexity rather than removing the need for electronics.\n\nWavelength multiplexing increases capacity by placing several carriers on one fiber. If \\(N\\) channels each carry a net rate \\(R\\), their aggregate net rate is approximately \\(NR\\), provided channel spacing, crosstalk, and the optical power budget remain adequate. Additional channels require filtering, source control, and often thermal tuning. Aggregate capacity therefore does not scale without associated costs in optical power, control complexity, and manufacturing tolerance.\n\nEnergy efficiency must be evaluated across the complete link. Relevant contributions include laser wall-plug efficiency, optical coupling and propagation loss, modulator drivers, receiver electronics, clock recovery, digital processing, and thermal control. An extremely low switching energy quoted for a modulator does not describe the energy consumed by the transceiver. Similarly, increasing optical power to compensate for excess loss can erase savings achieved elsewhere.\n\nThe attraction of optical interconnects grows when electrical channels require substantial equalization or cannot provide sufficient bandwidth over the required distance. This is especially relevant to parallel computing systems connecting accelerators, memory resources, and network switches. However, there is no universal distance below which electrical wiring always wins or above which optics always wins. The crossover depends on data rate, reach, connector losses, fabrication technology, utilization, and system topology. Optical propagation is not itself a guarantee of lower end-to-end latency; conversion, buffering, serialization, and error correction can dominate the delay."
    },
    {
      "heading": "Sensing, photonic computing, and quantum applications",
      "text": "Silicon-photonic sensing exploits the interaction between guided light and its surroundings. Part of a waveguide mode extends outside the core, forming an evanescent field that responds to changes in nearby refractive index or absorption. A ring resonator can convert such a change into a resonance shift, while an interferometer can measure an accumulated phase difference. Functional coatings can provide chemical selectivity, although selectivity comes from the surface chemistry rather than from the silicon waveguide alone.\n\nThese sensors can support measurements of gases, liquids, and biomolecular binding. Practical sensitivity depends on optical loss, noise, sample delivery, nonspecific adsorption, temperature drift, and calibration. A small detectable wavelength shift is not automatically equivalent to accurate concentration measurement in a complex sample. Reference channels and differential measurements are often needed to distinguish the desired signal from bulk-index changes or environmental disturbances. At other wavelengths, integrated circuits support spectroscopy, with material transparency determining which absorption bands are accessible.\n\nOptical phased arrays provide another application. They distribute light among many emitters and control relative phases to shape or steer a beam. Such arrays can contribute to lidar and free-space optical communication. Their performance depends on aperture size, emitter spacing, phase accuracy, steering range, and unwanted sidelobes. Dense emitter placement is desirable for avoiding grating lobes, but creates challenges involving optical coupling, routing, and electrical control. High transmitted power and efficient collection are additional system requirements beyond beam steering.\n\nIn photonic computing, interferometer meshes or wavelength-selective circuits implement linear transformations. Optical amplitudes can represent vector components, while programmable phase shifters and couplers realize operations related to matrix multiplication. These methods are being investigated for signal processing and artificial neural networks. Their potential advantages include parallel propagation and high analog bandwidth, but useful computation also requires input encoding, output detection, memory access, calibration, and often nonlinear operations performed electronically. Optical shot noise, drift, finite dynamic range, and conversion overhead constrain usable numerical precision.\n\nQuantum photonics uses a different set of resources. Silicon’s nonlinear optical response can generate correlated photon pairs through four-wave mixing, and waveguide circuits can manipulate path-encoded qubits. Filters separate weak generated photons from strong pump light, while interferometers implement transformations needed for experiments in quantum information. Photon loss, spectral distinguishability, multiphoton emission, and detector efficiency directly affect performance. Superconducting single-photon detectors may be integrated or coupled to the chip, introducing cryogenic operating requirements.\n\nAcross these applications, programmability creates a common control problem: many optical elements must be calibrated and kept stable simultaneously. Scaling therefore depends not only on adding more waveguides, but also on reducing loss, improving component uniformity, monitoring internal states, and controlling thermal interactions. The relevant limits differ by application: sensing emphasizes selectivity and drift, analog computing emphasizes precision and conversion cost, and quantum circuits emphasize loss and photon indistinguishability."
    }
  ],
  "links": [
    "semiconductor",
    "integrated-circuit",
    "data-center",
    "optical-waveguide",
    "wavelength-division-multiplexing",
    "pn-junction",
    "bit",
    "photodiode",
    "photon",
    "laser",
    "photolithography",
    "semiconductor-wafer",
    "cmos",
    "electronic-design-automation",
    "semiconductor-packaging",
    "chiplet",
    "parallel-computing",
    "spectroscopy",
    "lidar",
    "matrix",
    "artificial-neural-network",
    "qubit"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}