{
  "id": "shutter-speed",
  "title": "Shutter Speed",
  "lang": "en",
  "source_lang": "en",
  "summary": "Shutter speed is the duration of a photographic exposure, governing light collection and the appearance of motion in still images and moving pictures.",
  "category": "arts",
  "subcategory": "visual-arts",
  "type": "concept",
  "aliases": [
    "Exposure time",
    "Shutter time"
  ],
  "generated_at": "2026-11-02",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/shutter-speed/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/shutter-speed/",
      "json": "https://aiwiki.page/zh/shutter-speed.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Shutter speed is the length of time during which a camera records light for an individual exposure. In photography, it helps determine both the amount of light captured and how movement appears in the resulting image. A short exposure can render a moving subject sharply, while a long exposure can record movement as blur or trails. Despite its name, shutter speed ordinarily denotes a duration, measured in seconds or fractions of a second, rather than the physical speed of a shutter mechanism."
    },
    {
      "heading": "Measurement and notation",
      "text": "Typical shutter-speed settings include \\(1/1000\\), \\(1/500\\), \\(1/250\\), \\(1/125\\), \\(1/60\\), and \\(1/30\\) second, followed by longer durations such as one second or several minutes. Camera displays often omit the numerator: “250” commonly means \\(1/250\\) second, while a quotation mark or similar indicator distinguishes whole seconds.\n\nA faster shutter speed means a shorter exposure; a slower shutter speed means a longer one. Thus, \\(1/1000\\) second is faster than \\(1/125\\) second.\n\nTraditional settings form an approximately doubling sequence. Each doubling or halving of exposure time corresponds to one stop: changing from \\(1/250\\) to \\(1/125\\) second doubles the light collected under otherwise unchanged conditions. Many cameras also offer half-stop or third-stop increments. The familiar displayed fractions are rounded nominal values rather than a perfectly exact mathematical sequence."
    },
    {
      "heading": "Exposure and light collection",
      "text": "Shutter speed is one of the principal controls of photographic exposure, together with aperture. For constant illumination at the recording surface,\n\n\\[H = Et,\\]\n\nwhere \\(H\\) is exposure, \\(E\\) is image-plane illuminance, and \\(t\\) is exposure time. Doubling the exposure time therefore doubles the exposure, provided the illumination remains constant.\n\nAperture controls the light admitted through the lens, while shutter speed controls the duration of its collection. Ignoring changes in lens transmission and other losses, exposure for a given scene is proportional to\n\n\\[H \\propto \\frac{t}{N^2},\\]\n\nwhere \\(N\\) is the f-number. Halving the exposure time can therefore be compensated for by opening the aperture by one stop.\n\nISO speed is often grouped with aperture and shutter speed as an “exposure triangle.” This is useful operationally but requires a distinction: changing a digital camera’s ISO setting does not itself increase the number of photons collected during an otherwise identical exposure. It affects the camera’s signal processing and its relationship between exposure and output brightness; it may also cause automatic exposure controls to select a different shutter speed or aperture.\n\nAt very long or very short exposures, some photographic films depart from the simple proportional relationship between illumination, time, and recorded response. This behavior is called reciprocity failure."
    },
    {
      "heading": "Motion blur and apparent sharpness",
      "text": "Shutter speed governs how far a subject’s image can move across the recording surface during an exposure. For approximately constant image-plane velocity,\n\n\\[b \\approx vt,\\]\n\nwhere \\(b\\) is the distance of the resulting blur, \\(v\\) is the image’s velocity across the recording surface, and \\(t\\) is exposure time.\n\nMotion blur therefore depends on more than the subject’s physical speed. Its direction of travel, distance from the camera, magnification, and the final viewing conditions also matter. A nearby subject moving across the frame generally produces more visible displacement than a distant subject moving toward the camera.\n\nShort exposures are widely used in sports, wildlife, and scientific photography to isolate phases of movement. Longer exposures can render flowing water, traffic, clouds, or moving crowds as continuous forms. Neither treatment is inherently more accurate aesthetically: each represents a different interval of time.\n\nCamera movement\n\nMovement of the camera can blur stationary subjects. A traditional handheld guideline places the exposure time near the reciprocal of the lens’s focal length expressed in millimeters—for example, about \\(1/50\\) second for a 50 mm lens on a 35 mm-format camera. This is a rough convention rather than a physical limit. Sensor format, image resolution, viewing size, technique, and camera movement all affect the result.\n\nImage stabilization reduces blur caused by certain kinds of camera motion, but does not normally freeze independently moving subjects. A tripod can support a camera during a long exposure, yet movement within the scene remains visible.\n\nPanning\n\nIn panning, the camera follows a moving subject during the exposure. If its motion closely matches the subject’s movement across the frame, the subject can remain relatively sharp while the background becomes streaked. Different parts of an articulated subject, such as a runner’s limbs, may still blur."
    },
    {
      "heading": "Mechanical and electronic shutters",
      "text": "Exposure time must be distinguished from the time taken to expose or read an entire image. This distinction is especially important for moving subjects and pulsed light.\n\nFocal-plane shutters\n\nA focal-plane shutter typically uses two curtains close to the film or sensor. At slower settings, the first curtain uncovers the recording surface before the second closes it. At faster settings, the second curtain starts closing before the first has completed its travel, creating a moving slit.\n\nEach point on the recording surface may receive a brief exposure even though the curtains take longer to traverse the entire frame. A nominal \\(1/4000\\)-second exposure therefore does not necessarily mean that the whole image is recorded within the same \\(1/4000\\)-second interval.\n\nLeaf shutters\n\nA leaf shutter, usually positioned within or near the lens assembly, opens and closes overlapping blades. Its exposure characteristics differ from those of a traveling focal-plane slit. Leaf shutters generally permit flash synchronization across a wider range of shutter settings, although maximum speeds and operating restrictions depend on the design.\n\nElectronic shutters\n\nAn electronic shutter controls exposure through the operation of an image sensor rather than solely through mechanical light-blocking components.\n\nWith a rolling shutter, different rows begin and end their exposures at different times. Fast movement can consequently produce leaning verticals, distorted rotating objects, or stretched shapes. Shortening the exposure for each row may reduce motion blur without eliminating these timing distortions.\n\nWith a global shutter, the pixels share essentially the same exposure interval. This avoids the characteristic geometric skew of rolling capture, although other performance characteristics remain sensor-dependent."
    },
    {
      "heading": "Flash synchronization and fluctuating light",
      "text": "A conventional electronic photographic flash emits a short pulse. For ordinary flash operation with a focal-plane shutter, the frame must normally be fully uncovered when the pulse occurs. The fastest setting that permits this is commonly called the flash sync speed or X-sync speed. At faster settings, a traveling slit can cause part of the image to be obscured.\n\nHigh-speed synchronization uses extended or repeated illumination while the slit crosses the sensor, generally at a cost in effective flash output.\n\nIn a flash-lit exposure, shutter speed and flash duration can play different roles. When flash dominates the subject’s illumination, the flash pulse may determine how sharply movement is rendered. Ambient light continues to accumulate during the camera’s exposure and can produce an additional blurred image.\n\nFluorescent lamps, LEDs, and other fluctuating light sources can produce uneven brightness, color variation, or bands. These effects depend on the relationship between the light’s modulation, exposure duration, and sensor or shutter timing—not simply on whether the nominal shutter speed is fast."
    },
    {
      "heading": "Shutter speed in moving images",
      "text": "In cinematography, exposure time interacts with frame rate to determine the motion blur within each frame. It does not ordinarily determine how many frames are recorded per second.\n\nExposure is often described using shutter angle, a convention derived from rotating motion-picture shutters:\n\n\\[t = \\frac{\\theta}{360^\\circ f},\\]\n\nwhere \\(\\theta\\) is shutter angle and \\(f\\) is frame rate. At 24 frames per second, a \\(180^\\circ\\) shutter corresponds to an exposure of \\(1/48\\) second.\n\nSmaller shutter angles produce shorter exposures and crisper individual frames, which can make motion appear more abrupt or staccato. Larger angles produce more motion blur. The perceived result also depends on frame rate, subject movement, camera movement, and display conditions."
    },
    {
      "heading": "Historical development and extended exposures",
      "text": "Early photographic processes required exposures long enough that removing and replacing a lens cap could serve as a practical timing method. More sensitive photographic materials and improved optics made shorter exposures possible, encouraging the development of timed mechanical shutters. Brief exposures became important to instantaneous photography and the analysis of movement.\n\nModern cameras commonly provide timed automatic settings alongside extended-exposure modes. In Bulb mode, the shutter traditionally remains open while the release is held or electronically latched. In Time mode, one action opens the shutter and another closes it, although implementations vary.\n\nLong exposures support applications such as light painting, architectural photography, and astronomical imaging. Their limits include changing illumination, unwanted movement, sensor noise, and—in film—reciprocity failure. Short exposures face a different constraint: collecting enough light within a brief interval."
    }
  ],
  "links": [
    "photography",
    "aperture",
    "rolling-shutter",
    "global-shutter"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}