{
  "id": "secchi-disk",
  "title": "Secchi Disk",
  "lang": "en",
  "source_lang": "en",
  "summary": "A Secchi disk is a submerged visual target used to measure water transparency from the depth at which it disappears from view.",
  "category": "science",
  "subcategory": "earth-science",
  "type": "concept",
  "aliases": [
    "Secchi disc"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/secchi-disk/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/secchi-disk/",
      "json": "https://aiwiki.page/zh/secchi-disk.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A Secchi disk is a simple instrument used to measure the transparency of water in lakes, reservoirs, coastal waters, and the open ocean. It consists of a circular, usually white or black-and-white disk attached to a graduated line. The disk is lowered until it disappears from view, and its depth is recorded using a standardized procedure. This measurement, called Secchi depth, provides an inexpensive indicator of water clarity, but it does not directly measure the concentration of any particular substance."
    },
    {
      "heading": "Design and history",
      "text": "The instrument is named after the Italian astronomer Angelo Secchi, who conducted systematic observations of marine water transparency in 1865. Its simplicity and low cost have supported its continued use in professional surveys, long-term monitoring, and volunteer observation programs.\n\nTwo common designs are:\n\n- An all-white disk, traditionally used in marine observations, often about 30 centimetres in diameter.\n- A disk divided into alternating black and white quadrants, widely used in inland waters, commonly about 20 centimetres in diameter.\n\nOther sizes and designs exist. Diameter, surface finish, and colour pattern affect visibility, so measurements made with different disks are not necessarily interchangeable. A weight helps keep the disk horizontal and the line vertical."
    },
    {
      "heading": "Measurement procedure",
      "text": "A common procedure is to lower the disk slowly until it is no longer visible, record that depth, and then raise it until it becomes visible again. Secchi depth is reported as the average of these two readings:\n\n\\[z_{\\mathrm{SD}}=\\frac{z_{\\mathrm{disappear}}+z_{\\mathrm{reappear}}}{2}.\\]\n\nSome monitoring programs use a disappearance-only procedure instead. The method should therefore be documented when comparing datasets.\n\nObservations are generally made from a stable platform, away from disturbed sediment and propeller wash. Many protocols specify the shaded side of a boat to reduce surface glare, although exact requirements vary. The depth is measured from the water surface to the disk, not from the observer’s hand or the boat’s gunwale.\n\nFor repeatable observations, monitoring programs commonly record:\n\n- Disk design and size.\n- Date, time, and sampling location.\n- Cloud cover, surface conditions, and other factors affecting visibility.\n- Whether the disk or lake bottom remained visible at the maximum available depth.\n- Any departure from the standard procedure.\n\nIf the disk reaches the bottom while still visible, the result is limited by water depth. It should not be treated as a normal disappearance measurement: the actual Secchi depth is greater than the depth reached."
    },
    {
      "heading": "Optical basis",
      "text": "The disk becomes invisible when its visual contrast against the surrounding water falls below the observer’s detection threshold. This depends on illumination reaching the disk, light returning toward the observer, and background light entering the line of sight.\n\nBoth absorption and scattering affect visibility. Important influences include suspended mineral particles, phytoplankton, organic debris, and coloured dissolved material. Consequently, two water bodies can have the same Secchi depth for different reasons. One may contain abundant microscopic algae, while another is darkened by dissolved organic matter.\n\nSecchi depth is therefore an operational measure of transparency: its meaning is defined partly by the instrument and observation procedure. It is not identical to turbidity, which is generally measured instrumentally from scattered light under specified optical conditions.\n\nRelationship to light attenuation\n\nUnder a simplified description, downward irradiance decreases with depth according to\n\n\\[E_d(z)=E_d(0)\\exp(-K_d z),\\]\n\nwhere \\(E_d(z)\\) is downward irradiance at depth \\(z\\), and \\(K_d\\) is a diffuse attenuation coefficient. In real waters, \\(K_d\\) can vary with depth and wavelength.\n\nEmpirical relationships sometimes take the form\n\n\\[K_d \\approx \\frac{a}{z_{\\mathrm{SD}}},\\]\n\nwhere \\(a\\) is an empirically determined coefficient. A value near 1.7 is often used as a rough approximation, but it is not universal. The relationship depends on water composition, optical conditions, and the light quantity being estimated.\n\nSecchi depth can also help estimate the euphotic zone, conventionally defined by a low fraction—often 1%—of surface photosynthetically available radiation. Such estimates require an appropriate empirical relationship rather than a fixed conversion valid for all waters."
    },
    {
      "heading": "Applications",
      "text": "Lake and reservoir monitoring\n\nSecchi depth is widely used to track seasonal and long-term changes in clarity. In lakes where algal abundance strongly controls transparency, a decrease in Secchi depth may accompany increased chlorophyll concentrations or eutrophication.\n\nSome trophic-state classification systems incorporate Secchi depth alongside nutrient and chlorophyll measurements. Interpretation requires care: suspended sediment or naturally coloured water can produce low transparency without high algal productivity.\n\nCoastal and marine observations\n\nMarine Secchi measurements document spatial and seasonal differences in transparency. These differences may reflect plankton growth, sediment resuspension, or material delivered by a river. Observations can complement instrument-based studies of underwater light and ecosystem conditions.\n\nLong-term and volunteer monitoring\n\nThe disk requires no electrical power and little specialized equipment, making it suitable for repeated observations over large areas. Historical records can reveal changes in water clarity, provided differences in equipment, methods, and sampling locations are considered."
    },
    {
      "heading": "Limitations and uncertainty",
      "text": "Secchi readings depend on both water properties and observing conditions. Important sources of measurement uncertainty include observer eyesight, glare, waves, cloud cover, illumination angle, disk condition, and the angle of the suspension line. Currents can displace the disk horizontally, causing line length to exceed its actual vertical depth.\n\nA single reading does not identify what caused a change in clarity. Increased transparency might reflect reduced algal biomass, settling sediment, or a change in water source. Low transparency alone cannot establish contamination, ecological degradation, or suitability for drinking or recreation.\n\nSecchi measurements also provide limited information about vertical structure. A clear surface layer above a turbid layer can yield a different light environment from that of a uniformly mixed water column with a similar Secchi depth. Direct light profiles, turbidity measurements, and water samples provide complementary information that the disk alone cannot supply."
    }
  ],
  "links": [
    "water",
    "ocean",
    "scattering",
    "phytoplankton",
    "chlorophyll",
    "eutrophication",
    "river",
    "ecosystem",
    "measurement-uncertainty"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}