{
  "id": "scale-factor",
  "title": "Scale Factor (Cosmology)",
  "lang": "en",
  "source_lang": "en",
  "summary": "The cosmological scale factor describes how distances between comoving points change as the universe expands or contracts.",
  "category": "science",
  "subcategory": "astronomy",
  "type": "concept",
  "aliases": [
    "Cosmic scale factor",
    "Cosmological scale factor",
    "Expansion factor"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/scale-factor/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/scale-factor/",
      "json": "https://aiwiki.page/zh/scale-factor.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The scale factor, usually written \\(a(t)\\), is a function of cosmic time that describes the expansion or contraction of a spatially homogeneous and isotropic universe. In cosmology, it specifies how the physical distance between points moving with the average cosmic flow changes over time. Its present-day value is commonly set to \\(a(t_0)=1\\), so that earlier epochs in an expanding universe have smaller values. The scale factor connects the geometry of spacetime with observable quantities such as cosmological redshift, distances, and the thermal history of the universe."
    },
    {
      "heading": "Geometrical definition",
      "text": "In general relativity, a homogeneous and isotropic spacetime is described by the Friedmann–Lemaître–Robertson–Walker metric, often abbreviated FLRW. One form of its line element is\n\n\\[ds^2=-c^2dt^2+a^2(t) \\left[d\\chi^2+S_K^2(\\chi)\\,d\\Omega^2\\right],\\]\n\nwhere:\n\n- \\(t\\) is cosmic time, the proper time measured by observers moving with the average cosmic flow;\n- \\(c\\) is the speed of light;\n- \\(\\chi\\) is a radial comoving coordinate;\n- \\(d\\Omega^2=d\\theta^2+\\sin^2\\theta\\,d\\phi^2\\) describes angular separations;\n- \\(K\\) specifies the constant spatial curvature of the reference spatial geometry.\n\nWith dimensionless \\(a\\) and a comoving coordinate \\(\\chi\\) having units of length,\n\n\\[S_K(\\chi)= \\begin{cases} \\sin(\\sqrt{K}\\chi)/\\sqrt{K}, & K>0,\\\\ \\chi, & K=0,\\\\ \\sinh(\\sqrt{-K}\\chi)/\\sqrt{-K}, & K<0. \\end{cases}\\]\n\nThe spatial geometry at different times differs by the overall multiplier \\(a^2(t)\\). Its spatial curvature therefore scales as \\(K/a^2\\).\n\nFor two comoving points separated radially by a fixed coordinate interval \\(\\Delta\\chi\\), their proper separation on a surface of constant cosmic time is\n\n\\[D(t)=a(t)\\Delta\\chi.\\]\n\nThis distinction between comoving distance and proper distance is fundamental. Comoving coordinates factor out the uniform expansion; proper distances include it. A proper distance defined at one cosmic time is not generally the same as a distance inferred directly from light received from a distant object, because that light was emitted at an earlier time.\n\nNormalization and units\n\nThe absolute normalization of \\(a(t)\\) is conventional. Multiplying \\(a\\) by a constant and consistently rescaling the comoving coordinates and reference curvature leaves the physical geometry unchanged. Ratios such as \\(a(t_2)/a(t_1)\\) are independent of this convention.\n\nThe common choice\n\n\\[a(t_0)=1\\]\n\nmakes the scale factor dimensionless. Another convention assigns dimensions of length to \\(a\\), uses dimensionless spatial coordinates, and normalizes the curvature index to \\(k=+1,0,-1\\). Equations involving curvature must be interpreted consistently with the chosen convention."
    },
    {
      "heading": "Expansion rate and acceleration",
      "text": "The Hubble parameter is the fractional rate of change of the scale factor:\n\n\\[H(t)=\\frac{\\dot a(t)}{a(t)}.\\]\n\nA dot denotes differentiation with respect to cosmic time. Positive \\(H\\) indicates expansion, while negative \\(H\\) indicates contraction. The present value, \\(H_0\\), is called the Hubble constant, although \\(H(t)\\) generally changes over cosmic history.\n\nDifferentiating the proper separation of comoving points gives\n\n\\[\\dot D=HD.\\]\n\nThis is the distance–recession relation for the ideal cosmic flow. Real galaxies also have peculiar velocities relative to that flow, produced by local gravitational structure.\n\nThe sign of \\(\\dot a\\) distinguishes expansion from contraction, whereas the sign of \\(\\ddot a\\) distinguishes acceleration from deceleration. An expanding universe can therefore be decelerating: distances still increase, but \\(\\dot a\\) decreases.\n\nA frequently used measure is the deceleration parameter,\n\n\\[q(t)=-\\frac{a\\ddot a}{\\dot a^2}.\\]\n\nDuring expansion, \\(q>0\\) means decelerated expansion and \\(q<0\\) means accelerated expansion. Since\n\n\\[\\dot H=\\frac{\\ddot a}{a}-H^2,\\]\n\naccelerated expansion does not necessarily imply an increasing Hubble parameter. In many accelerating models, \\(H\\) decreases even though \\(\\ddot a>0\\)."
    },
    {
      "heading": "Connection with redshift",
      "text": "The cosmological component of redshift directly measures the relative scale factor between emission and observation. For light emitted and received by comoving observers in an FLRW spacetime,\n\n\\[1+z= \\frac{\\lambda_{\\mathrm{obs}}}{\\lambda_{\\mathrm{em}}} = \\frac{a(t_{\\mathrm{obs}})}{a(t_{\\mathrm{em}})}.\\]\n\nWith the present-day normalization \\(a(t_0)=1\\),\n\n\\[a(t_{\\mathrm{em}})=\\frac{1}{1+z}.\\]\n\nThus, light observed at cosmological redshift \\(z=3\\) was emitted when the scale factor was one-quarter of its present value. At that epoch, the proper separation between any fixed pair of comoving points was also one-quarter of its present value.\n\nFor freely propagating photons, wavelength scales as \\(a\\), while photon energy scales as \\(a^{-1}\\). This relation follows from light propagation through the evolving spacetime geometry.\n\nObserved redshifts can additionally contain contributions from peculiar motion and gravitational fields. The simple scale-factor relation applies to the cosmological component, not automatically to every measured wavelength shift."
    },
    {
      "heading": "Dynamical equations",
      "text": "The evolution of the scale factor is determined by the Friedmann equations, obtained by applying the Einstein field equations to an FLRW spacetime.\n\nUsing the dimensionless scale-factor convention above,\n\n\\[H^2= \\frac{8\\pi G}{3}\\rho +\\frac{\\Lambda c^2}{3} -\\frac{Kc^2}{a^2},\\]\n\nand\n\n\\[\\frac{\\ddot a}{a} = -\\frac{4\\pi G}{3} \\left(\\rho+\\frac{3p}{c^2}\\right) +\\frac{\\Lambda c^2}{3}.\\]\n\nHere \\(G\\) is the gravitational constant, \\(\\rho\\) is the total mass-equivalent density of the included components, \\(p\\) is their total pressure, and \\(\\Lambda\\) is the cosmological constant. The corresponding energy density is \\(\\rho c^2\\). In this notation, the cosmological constant is written separately rather than included in \\(\\rho\\) and \\(p\\).\n\nThe acceleration equation shows that pressure, as well as energy density, affects cosmic expansion. Positive pressure contributes to deceleration. A sufficiently negative pressure can support accelerated expansion.\n\nFor a separately conserved fluid component,\n\n\\[\\dot\\rho+3H\\left(\\rho+\\frac{p}{c^2}\\right)=0.\\]\n\nIf its equation-of-state parameter\n\n\\[w=\\frac{p}{\\rho c^2}\\]\n\nis constant, integration gives\n\n\\[\\rho\\propto a^{-3(1+w)}.\\]\n\nThese equations connect the contents of the universe to its expansion history."
    },
    {
      "heading": "Matter, radiation, and dark energy",
      "text": "Different components change differently as the universe expands.\n\nComponent | Approximate equation of state | Density dependence\nNonrelativistic matter | \\(w=0\\) | \\(\\rho_{\\mathrm m}\\propto a^{-3}\\)\nRelativistic radiation | \\(w=1/3\\) | \\(\\rho_{\\mathrm r}\\propto a^{-4}\\)\nCosmological constant | \\(w=-1\\) | \\(\\rho_\\Lambda=\\text{constant}\\)\n\nFor conserved nonrelativistic matter, including ordinary matter and cold dark matter, the \\(a^{-3}\\) dependence reflects dilution as physical volume increases as \\(a^3\\).\n\nRadiation has an additional factor of \\(a^{-1}\\), because each freely propagating particle loses energy through cosmological redshift. A cosmological constant, by contrast, retains constant energy density as the universe expands.\n\nMore general forms of dark energy need not have \\(w=-1\\). For a separately conserved component with a variable equation of state,\n\n\\[\\rho(a)=\\rho(a_{\\mathrm{ref}}) \\exp\\left[ -3\\int_{a_{\\mathrm{ref}}}^{a} \\bigl(1+w(a')\\bigr)\\frac{da'}{a'} \\right].\\]\n\nTransitions between relativistic and nonrelativistic behavior, or energy exchange between components, require a more detailed treatment than the simple power laws.\n\nIdealized expansion histories\n\nIn a spatially flat universe dominated by a single component with constant \\(w>-1\\), and with no separate cosmological constant, the expanding solution can be written\n\n\\[a(t)\\propto (t-t_{\\mathrm B})^{2/[3(1+w)]},\\]\n\nwhere \\(t_{\\mathrm B}\\) is the formal time at which this solution reaches zero scale factor.\n\nImportant limiting cases are\n\n\\[a(t)\\propto (t-t_{\\mathrm B})^{1/2} \\quad\\text{for radiation domination},\\]\n\nand\n\n\\[a(t)\\propto (t-t_{\\mathrm B})^{2/3} \\quad\\text{for matter domination}.\\]\n\nA flat universe dominated by a positive cosmological constant instead has exponential expansion,\n\n\\[a(t)\\propto e^{Ht},\\]\n\nwith constant \\(H\\). Approximately exponential growth also occurs in many models of cosmic inflation, although the physical mechanism need not be a cosmological constant.\n\nThese expressions describe idealized regimes. The actual expansion history involves mixtures of components and transitions between their periods of dominance."
    },
    {
      "heading": "Temperature and the early universe",
      "text": "The scale factor provides a natural way to describe the thermal history associated with the Big Bang model.\n\nFor a freely expanding thermal photon distribution, with no significant subsequent energy injection,\n\n\\[T_\\gamma\\propto a^{-1},\\]\n\nwhere \\(T_\\gamma\\) is the radiation temperature. Consequently, the cosmic microwave background was hotter when the scale factor was smaller.\n\nAt early times, changes in the particle species present can modify simple temperature scaling. For a thermally coupled plasma undergoing adiabatic expansion,\n\n\\[g_{*s}(T)\\,T^3a^3=\\text{constant},\\]\n\nwhere \\(g_{*s}\\) represents the effective number of particle degrees of freedom contributing to entropy. Annihilation or decoupling of particle species can therefore change the relation between a particular species’ temperature and \\(a\\)."
    },
    {
      "heading": "Observational use",
      "text": "The scale factor is not measured as an absolute length. Its ratios are inferred from cosmological redshifts, while its evolution is constrained using distance measurements, standard rulers, and other observations.\n\nIn the Lambda–cold dark matter model, the expansion history is commonly written\n\n\\[H^2(a)=H_0^2 \\left[ \\Omega_{\\mathrm r,0}a^{-4} +\\Omega_{\\mathrm m,0}a^{-3} +\\Omega_{K,0}a^{-2} +\\Omega_{\\Lambda,0} \\right],\\]\n\nwhere the \\(\\Omega\\) parameters give the present-day radiation, matter, curvature, and cosmological-constant contributions. Here\n\n\\[\\Omega_{K,0}=-\\frac{Kc^2}{H_0^2}.\\]\n\nThe expression assumes radiation and matter follow their idealized scaling laws; precision treatments account for effects such as the changing behavior of massive neutrinos.\n\nOnce \\(H(a)\\) is specified, elapsed cosmic time follows from\n\n\\[dt=\\frac{da}{aH(a)}.\\]\n\nFor radial light propagation, the comoving distance to an object at redshift \\(z\\) is\n\n\\[\\chi(z)=c\\int_0^z\\frac{dz'}{H(z')}.\\]\n\nTogether with spatial curvature and the scale factor at emission, this distance determines angular-diameter and luminosity distances. Observations of supernovae, the cosmic microwave background, and large-scale clustering therefore constrain the evolution of \\(a(t)\\)."
    },
    {
      "heading": "Physical interpretation and limitations",
      "text": "The scale factor describes large-scale cosmic geometry, not a universal stretching of every object. Atoms, planetary systems, and gravitationally bound galaxies do not generally grow in proportion to \\(a(t)\\). Their sizes are governed primarily by local forces and dynamics.\n\nNor does expansion require a central point or an external space into which the universe expands. In an FLRW model, every comoving observer can describe sufficiently distant comoving objects as receding, without occupying a privileged location.\n\nA recession rate \\(HD\\) can exceed \\(c\\) for sufficiently large proper distance. This is a rate of change of separation defined across a curved spacetime, not a locally measured velocity through one inertial frame, and does not violate special relativity.\n\nA single scale factor is exact only under the assumptions of spatial homogeneity and isotropy. The real universe contains density fluctuations, peculiar motions, and bound structures. Cosmological perturbation theory describes such departures using additional variables on top of an FLRW background. Anisotropic cosmological models can require different directional scale factors.\n\nFinally, extrapolating a classical solution to \\(a=0\\) often produces divergent densities or curvature. Such behavior identifies a limit of that classical description; it does not by itself establish what occurred at an absolute beginning or whether a more complete theory replaces the singularity."
    }
  ],
  "links": [
    "cosmology",
    "spacetime",
    "general-relativity",
    "flrw-metric",
    "speed-of-light",
    "hubble-parameter",
    "galaxy",
    "redshift",
    "photon",
    "energy",
    "friedmann-equations",
    "einstein-field-equations",
    "pressure",
    "energy-density",
    "equation-of-state",
    "dark-matter",
    "dark-energy",
    "cosmic-inflation",
    "big-bang",
    "temperature",
    "cosmic-microwave-background",
    "lambda-cdm-model",
    "supernova",
    "special-relativity"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}