{
  "id": "rock-cycle",
  "title": "Rock Cycle",
  "lang": "en",
  "source_lang": "en",
  "summary": "The rock cycle is the interconnected set of processes that forms, transforms, and recycles rocks within Earth’s crust and at its surface.",
  "category": "geography",
  "subcategory": "",
  "type": "concept",
  "aliases": [
    "Geological rock cycle"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/rock-cycle/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/rock-cycle/",
      "json": "https://aiwiki.page/zh/rock-cycle.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The rock cycle is the interconnected set of processes through which rocks form, change, break down, and become incorporated into new rocks. It connects the three main rock groups—igneous, sedimentary, and metamorphic—through crystallization, weathering, erosion, deposition, burial, metamorphism, and melting. Driven by Earth’s internal heat and by energy acting at its surface, the cycle operates across widely varying timescales. It is not a fixed sequence: a rock may follow many pathways, repeat a transformation, or remain largely unchanged for billions of years."
    },
    {
      "heading": "Main rock groups",
      "text": "The three principal groups describe how rocks formed, rather than permanent categories into which their material must always remain.\n\nRock group | Principal formation process | Common examples\nIgneous | Cooling and solidification of molten rock | Granite, basalt, gabbro\nSedimentary | Accumulation and consolidation of sediment, or chemical and biological precipitation | Sandstone, shale, limestone, rock salt\nMetamorphic | Transformation of pre-existing rock, mainly in the solid state, under changed temperature, pressure, and fluid conditions | Slate, schist, gneiss, marble\n\nRocks consist of minerals, mineral-like materials such as volcanic glass, or mixtures of these substances. Their composition and texture preserve evidence of their formation and later alteration. Petrology investigates rocks and their origins, while mineralogy examines the minerals that constitute them.\n\nThe boundaries between groups can be transitional. A deeply buried sedimentary rock may gradually acquire metamorphic characteristics, while a partly melted metamorphic rock can contain both solid-state and melt-derived features."
    },
    {
      "heading": "Processes of transformation",
      "text": "Crystallization and igneous rock formation\n\nMagma is molten or partly molten material below Earth’s surface. When it cools, minerals crystallize from the melt. Magma that solidifies underground produces intrusive igneous rock; molten material erupted at the surface, called lava, produces extrusive igneous rock.\n\nCooling rate strongly influences texture. Slow cooling commonly allows large crystals to grow, whereas rapid cooling generally produces small crystals or glass. Composition, dissolved gases, and the history of crystal growth also affect the resulting rock.\n\nCrystallization does not simply restore the rock that originally melted. Different minerals enter a melt or crystallize from it at different stages. Separation of crystals, mixing between magmas, and interaction with surrounding rock can therefore produce new compositions.\n\nWeathering, erosion, and transport\n\nWeathering alters or breaks down rock at or near Earth’s surface. Physical weathering fragments rock without necessarily changing its mineral composition. Chemical weathering dissolves minerals or transforms them through reactions involving water, oxygen, acids, and other substances. Organisms can contribute through root growth, burrowing, and chemical activity.\n\nWeathering differs from erosion, which removes material from its original location. Rivers, glaciers, waves, wind, and gravity carry particles away, while water also transports dissolved substances. These movements constitute sediment transport.\n\nTransport changes the sediment itself. Grains may become smaller, rounder, or sorted by size and density. Minerals that resist chemical breakdown can survive repeated episodes of erosion and deposition, whereas less stable minerals may dissolve or become clay minerals.\n\nDeposition and lithification\n\nSediment accumulates where transport conditions allow particles to settle or be trapped, including river channels, floodplains, lakes, deserts, continental shelves, and deep-ocean basins. Dissolved substances can also precipitate as minerals, either through inorganic chemical processes or with biological involvement.\n\nLoose sediment becomes sedimentary rock through lithification. Two major processes are:\n\n- Compaction: the weight of overlying material reduces pore space and brings grains closer together.\n- Cementation: minerals precipitate in pore spaces and bind grains together.\n\nLithification forms part of diagenesis, the broader set of physical, chemical, and biological changes that affect sediment after deposition and before substantial metamorphism. Some sedimentary rocks form through precipitation and early cementation without first existing as a thick deposit of loose grains.\n\nSedimentary layers preserve evidence of past environments and events. Their sequence, relationships, and distribution are studied in stratigraphy.\n\nMetamorphism\n\nMetamorphism changes a rock’s minerals, texture, or chemical composition in response to conditions different from those under which it formed, without wholesale melting. Important controls include temperature, pressure, differential stress, reactive fluids, and the composition of the original rock.\n\nRegional metamorphism affects extensive areas, commonly during deep burial and mountain building. Contact metamorphism occurs around hot igneous intrusions. Other settings include fault zones and places where hot fluids circulate through rock.\n\nExamples of metamorphic transformations include limestone becoming marble and sandstone becoming quartzite. Mud-rich sedimentary rocks can develop into slate, phyllite, schist, or gneiss under suitable conditions, although this sequence is not universal.\n\nMetamorphism does not require a preceding sedimentary stage. Igneous rocks and older metamorphic rocks can also undergo it.\n\nMelting\n\nRock melts when its conditions cross the relevant melting threshold. This may happen through heating, a decrease in pressure, or the addition of substances—especially water—that lower melting temperatures.\n\nMost natural melting is partial melting: some minerals or mineral components melt while others remain solid. Consequently, the melt commonly differs in composition from its source, and the unmelted residue also changes.\n\nThe mantle is predominantly solid, not a global ocean of magma. Magma forms in particular regions where pressure, temperature, and composition permit melting. Crustal rocks can also partially melt, especially in thickened or strongly heated crust."
    },
    {
      "heading": "Energy sources and tectonic settings",
      "text": "The rock cycle links Earth’s interior with its surface.\n\nInternal heat, derived from radioactive decay and energy retained from Earth’s formation, supports processes including mantle convection, magmatism, and metamorphism. Plate tectonics moves and deforms the outer rocky shell, creating settings in which rocks are formed, buried, heated, or exposed.\n\nSolar energy drives much of the atmospheric circulation and water cycle that enable weathering and transport. Gravity moves water, ice, and debris downhill and contributes to sediment compaction.\n\nDifferent tectonic settings emphasize different pathways:\n\n- Mid-ocean ridges: mantle rises and partially melts as pressure decreases. Magma forms new oceanic crust, which subsequently cools and reacts with circulating seawater.\n- Subduction zones: a descending plate carries rocks and sediments into higher-pressure conditions. Water released from the slab can promote melting in the overlying mantle. Subduction does not simply melt the entire descending plate.\n- Continental collision zones: crustal thickening promotes burial, deformation, and metamorphism, sometimes accompanied by partial melting. Uplift and erosion later expose deeper rocks.\n- Sedimentary basins: subsidence creates space in which sediment accumulates, is buried, and undergoes diagenesis.\n\nTectonic uplift and erosion can act together to bring deep rocks toward the surface, but they are distinct processes. Exhumation describes the movement of rocks toward the surface relative to overlying material; it can result from erosion, tectonic removal of overlying rocks, or combinations of processes."
    },
    {
      "heading": "Pathways and timescales",
      "text": "A common teaching diagram shows igneous rock becoming sediment, sediment becoming sedimentary rock, sedimentary rock becoming metamorphic rock, and metamorphic rock melting to produce magma. This is one possible route, not a mandatory order.\n\nOther pathways include:\n\n- Granite weathering into sediment that later becomes sandstone.\n- Basalt undergoing metamorphism without first becoming sediment.\n- Sandstone being eroded and incorporated into a younger sandstone.\n- Metamorphic rock being uplifted and weathered without melting.\n- Igneous or sedimentary rock melting directly under suitable conditions.\n\nThe term cycle therefore describes interconnected recycling rather than a regularly repeating circuit. Material can remain stored in continental crust for extremely long periods, and some material is transferred between the crust and mantle rather than circulating only within the crust.\n\nThere is no single duration for the rock cycle. Lava may solidify rapidly, while a large intrusion cools much more slowly. Sediment can be deposited during a brief flood but remain unburied for a long interval. Burial, metamorphism, and exhumation commonly extend over millions of years. Some rocks and mineral grains survive for billions of years."
    },
    {
      "heading": "Development of the concept and supporting evidence",
      "text": "The modern concept developed from recognition that landscapes and rocks record repeated episodes of erosion, deposition, burial, and uplift. In the late eighteenth century, James Hutton described a renewing Earth in which the destruction of exposed rocks supplied material for new strata, later consolidated and raised above sea level.\n\nAn important line of evidence was the unconformity: a surface representing missing geological time through erosion or non-deposition. At Siccar Point in Scotland, younger sedimentary layers overlie older, steeply tilted strata, recording multiple stages of deposition, deformation, erosion, and renewed deposition.\n\nTwentieth-century plate tectonics supplied a global framework connecting crust formation, mountain building, deep burial, and recycling. Evidence for individual transformations includes mineral assemblages, grain textures, sedimentary structures, cross-cutting intrusions, and chemical compositions. Radiometric dating helps establish the timing of crystallization, metamorphic events, and cooling, although different methods record different aspects of a rock’s history."
    },
    {
      "heading": "Connections with climate, landscapes, and resources",
      "text": "The rock cycle interacts with the carbon cycle. Chemical weathering of silicate minerals can consume atmospheric carbon dioxide. Subsequent transport of dissolved products and burial of carbonate minerals participate in long-term carbon transfer, while metamorphism and volcanism can return carbon dioxide to the atmosphere. The overall effect depends on the minerals, reactions, and reservoirs involved; not every weathering reaction causes lasting carbon removal.\n\nRock formation and transformation also influence geomorphology. Differences in mineral composition, fractures, and resistance to weathering help determine slopes, valleys, cliffs, and drainage patterns. Weathered rock contributes to soils, while fractures and sedimentary pore spaces influence groundwater storage and movement.\n\nMany mineral and energy resources reflect particular stages of the cycle. Magmatic differentiation can concentrate metals; circulating hot fluids can deposit mineral veins; sedimentary basins can preserve organic matter that later contributes to petroleum and natural gas formation. These deposits require specific geological circumstances and are not inevitable products of rock recycling."
    },
    {
      "heading": "Limits of the model",
      "text": "The rock cycle is a framework for organizing processes, not a complete explanation of every rock’s history. Simple diagrams often omit fluid circulation, chemical exchange, deformation, biological activity, and repeated recycling within a single rock group.\n\nNor does geological recycling imply rapid replenishment of resources. The processes that form useful deposits may take millions of years, and many require conditions that are uncommon or no longer operating at a particular location. Reconstructing an individual rock’s pathway requires field relationships, mineral and chemical evidence, and an appropriate geological chronology."
    }
  ],
  "links": [
    "petrology",
    "mineralogy",
    "weathering",
    "erosion",
    "sediment-transport",
    "lithification",
    "stratigraphy",
    "earth-mantle",
    "mantle-convection",
    "plate-tectonics",
    "water-cycle",
    "oceanic-crust",
    "subduction",
    "continental-crust",
    "unconformity",
    "radiometric-dating",
    "carbon-cycle",
    "geomorphology"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}