{
  "id": "rayleigh-jeans-law",
  "title": "Rayleigh–Jeans Law",
  "lang": "en",
  "source_lang": "en",
  "summary": "The Rayleigh–Jeans law describes the long-wavelength limit of blackbody radiation using classical physics, but predicts an unphysical divergence at high frequencies.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Rayleigh–Jeans radiation law",
    "Rayleigh–Jeans formula"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/rayleigh-jeans-law/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/rayleigh-jeans-law/",
      "json": "https://aiwiki.page/zh/rayleigh-jeans-law.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The Rayleigh–Jeans law is a classical expression for the spectrum of blackbody radiation at a given temperature. It predicts that spectral radiance per unit frequency is proportional to temperature and to the square of frequency. Derived from classical electromagnetic theory and statistical mechanics, it accurately describes thermal radiation when the energy associated with a radiation quantum is much smaller than the thermal energy scale. Applied at arbitrarily high frequencies, however, it predicts infinite total radiated energy—a failure known as the ultraviolet catastrophe. It is therefore both a useful approximation and an important historical example of the limits of classical physics."
    },
    {
      "heading": "Mathematical forms",
      "text": "For a blackbody in thermodynamic equilibrium at absolute temperature \\(T\\), the Rayleigh–Jeans expression for spectral radiance per unit frequency is\n\n\\[B_\\nu(T)=\\frac{2\\nu^2 k_{\\mathrm B}T}{c^2},\\]\n\nwhere:\n\n- \\(B_\\nu\\) is the power emitted per unit projected area, per unit solid angle, and per unit frequency interval;\n- \\(\\nu\\) is frequency;\n- \\(k_{\\mathrm B}\\) is the Boltzmann constant;\n- \\(c\\) is the speed of light in vacuum.\n\nIn SI units, \\(B_\\nu\\) is expressed in \\(\\mathrm{W\\,m^{-2}\\,sr^{-1}\\,Hz^{-1}}\\).\n\nThe corresponding expression per unit wavelength is\n\n\\[B_\\lambda(T)=\\frac{2ck_{\\mathrm B}T}{\\lambda^4},\\]\n\nwhere \\(\\lambda\\) is the vacuum wavelength. Its SI units are \\(\\mathrm{W\\,m^{-3}\\,sr^{-1}}\\), equivalently watts per square metre per steradian per metre of wavelength.\n\nThese spectral densities cannot be converted merely by substituting \\(\\nu=c/\\lambda\\). They refer to different interval widths and must satisfy\n\n\\[B_\\lambda = B_\\nu\\left|\\frac{d\\nu}{d\\lambda}\\right| = B_\\nu\\frac{c}{\\lambda^2}.\\]\n\nThus, the frequency form varies as \\(\\nu^2\\), whereas the wavelength form varies as \\(\\lambda^{-4}\\).\n\nFor isotropic radiation inside an equilibrium cavity, the spectral energy density is\n\n\\[u_\\nu(T)=\\frac{4\\pi}{c}B_\\nu(T) =\\frac{8\\pi\\nu^2k_{\\mathrm B}T}{c^3}.\\]\n\nThe spectral radiant exitance—the power leaving a blackbody surface per unit area and frequency, integrated over the outward hemisphere—is\n\n\\[M_\\nu(T)=\\pi B_\\nu(T).\\]\n\nThe factors \\(4\\pi/c\\) and \\(\\pi\\) arise from different angular integrations. Spectral radiance, cavity energy density, and radiant exitance are related quantities, but are not interchangeable."
    },
    {
      "heading": "Classical derivation",
      "text": "The derivation combines the allowed modes of an electromagnetic field with the classical equipartition theorem.\n\nCounting electromagnetic modes\n\nRadiation confined to a large cavity can be represented as standing electromagnetic waves. The allowed frequencies depend on the cavity geometry, but in the large-volume limit the number of modes per unit volume between \\(\\nu\\) and \\(\\nu+d\\nu\\) is\n\n\\[g(\\nu)\\,d\\nu = \\frac{8\\pi\\nu^2}{c^3}\\,d\\nu.\\]\n\nThis count includes the two independent transverse polarizations of electromagnetic radiation. The increase proportional to \\(\\nu^2\\) reflects the growing number of available spatial modes at higher frequencies.\n\nAssigning energy to each mode\n\nIn classical statistical mechanics, a normal mode behaves like a harmonic oscillator. Its energy has two quadratic contributions, corresponding to the electric and magnetic parts of the field. Equipartition assigns an average energy \\(k_{\\mathrm B}T/2\\) to each quadratic contribution, giving\n\n\\[\\langle E\\rangle=k_{\\mathrm B}T\\]\n\nper mode.\n\nMultiplying the mode density by this mean energy gives\n\n\\[u_\\nu(T) = g(\\nu)\\langle E\\rangle = \\frac{8\\pi\\nu^2k_{\\mathrm B}T}{c^3}.\\]\n\nThe essential classical assumption is that every mode receives the same mean thermal energy, regardless of frequency. That assumption becomes invalid when quantum effects are significant."
    },
    {
      "heading": "Relation to Planck’s law",
      "text": "Planck’s law gives the full equilibrium blackbody spectrum:\n\n\\[B_\\nu^{\\mathrm P}(T) = \\frac{2h\\nu^3}{c^2} \\frac{1}{e^{h\\nu/(k_{\\mathrm B}T)}-1},\\]\n\nwhere \\(h\\) is the Planck constant.\n\nDefine the dimensionless parameter\n\n\\[x=\\frac{h\\nu}{k_{\\mathrm B}T} =\\frac{hc}{\\lambda k_{\\mathrm B}T}.\\]\n\nWhen \\(x\\ll1\\), the exponential can be expanded as\n\n\\[e^x-1=x+\\frac{x^2}{2}+\\cdots.\\]\n\nKeeping only the leading term produces\n\n\\[B_\\nu^{\\mathrm P}(T) \\approx \\frac{2h\\nu^3}{c^2} \\frac{k_{\\mathrm B}T}{h\\nu} = \\frac{2\\nu^2k_{\\mathrm B}T}{c^2}.\\]\n\nThe Rayleigh–Jeans law is therefore the low-frequency, long-wavelength, or high-temperature limit of Planck’s law. These descriptions all refer to the same condition:\n\n\\[h\\nu\\ll k_{\\mathrm B}T.\\]\n\n“Low frequency” is consequently relative to temperature, not an absolute frequency range. In wavelength terms, the condition is\n\n\\[\\lambda T\\gg\\frac{hc}{k_{\\mathrm B}} \\approx1.4388\\times10^{-2}\\ \\mathrm{m\\,K}.\\]\n\nApproximation error\n\nAt fixed temperature and frequency, the ratio between the Rayleigh–Jeans prediction and Planck’s prediction is\n\n\\[\\frac{B_\\nu^{\\mathrm{RJ}}}{B_\\nu^{\\mathrm P}} = \\frac{e^x-1}{x} = 1+\\frac{x}{2}+\\frac{x^2}{6}+\\cdots.\\]\n\nThe Rayleigh–Jeans law therefore always overestimates the exact blackbody radiance for positive frequency and temperature. For small \\(x\\), the fractional excess is approximately \\(x/2\\). An error near one percent requires roughly \\(x\\lesssim0.02\\), a more restrictive criterion than simply requiring \\(x<1\\).\n\nFor example, at \\(T=300\\ \\mathrm K\\) and \\(\\nu=10\\ \\mathrm{GHz}\\), \\(x\\approx0.0016\\), giving an overestimate of approximately \\(0.08\\%\\). At \\(T=2.725\\ \\mathrm K\\) and \\(\\nu=100\\ \\mathrm{GHz}\\), \\(x\\approx1.76\\), and the approximation substantially overestimates the radiance."
    },
    {
      "heading": "The ultraviolet catastrophe",
      "text": "If the Rayleigh–Jeans expression is integrated over all frequencies, it gives\n\n\\[u(T) = \\int_0^\\infty u_\\nu(T)\\,d\\nu = \\frac{8\\pi k_{\\mathrm B}T}{c^3} \\int_0^\\infty \\nu^2\\,d\\nu,\\]\n\nwhich diverges for every \\(T>0\\). The predicted total energy density is infinite.\n\nThe problem arises because the number of modes increases without bound while classical equipartition assigns the same nonzero average energy to every mode. Although called the ultraviolet catastrophe, the divergence is not confined to the ultraviolet portion of the spectrum; it concerns extension to arbitrarily high frequency.\n\nPlanck’s law removes the divergence by replacing the classical mean mode energy with\n\n\\[\\langle E\\rangle_{\\mathrm{thermal}} = \\frac{h\\nu}{e^{h\\nu/(k_{\\mathrm B}T)}-1}.\\]\n\nAt high frequencies this energy becomes exponentially small. In the modern quantum description, thermal excitation of a mode requires photons with energy \\(h\\nu\\); such excitations become unlikely when \\(h\\nu\\gg k_{\\mathrm B}T\\).\n\nThis expression excludes zero-point energy, which is not part of the ordinary thermal blackbody spectrum. The ultraviolet catastrophe of classical thermal radiation is distinct from questions concerning vacuum energy in quantum field theory."
    },
    {
      "heading": "Historical development",
      "text": "Lord Rayleigh introduced a classical treatment of long-wavelength thermal radiation in 1900. James Jeans contributed to the development and correction of the mode-counting result in 1905, establishing the coefficient in the familiar formula.\n\nMax Planck proposed his blackbody radiation law in 1900, before the final Rayleigh–Jeans expression was established. The history is therefore more complex than a simple sequence in which the completed Rayleigh–Jeans law failed and Planck immediately replaced it.\n\nThe incompatibility between classical equipartition and the observed blackbody spectrum became a major problem in theoretical physics. Planck’s introduction of energy quantization supplied a successful description of the spectrum and helped initiate the development of quantum mechanics. The Rayleigh–Jeans result remained important because it showed the classical behavior that the quantum theory had to recover in the appropriate limit."
    },
    {
      "heading": "Applications and limitations",
      "text": "Radio astronomy and brightness temperature\n\nThe approximation is widely used in radio astronomy, where many observations satisfy \\(h\\nu\\ll k_{\\mathrm B}T\\). It allows measured specific intensity \\(I_\\nu\\) to be expressed as a Rayleigh–Jeans brightness temperature:\n\n\\[T_{\\mathrm b,RJ} = \\frac{c^2I_\\nu}{2k_{\\mathrm B}\\nu^2}.\\]\n\nThis is a way of expressing intensity in temperature units. It does not necessarily represent the physical temperature of the emitting material.\n\nFor an optically thick thermal source in the Rayleigh–Jeans regime, brightness temperature approaches the physical temperature at the emitting surface. For optically thin emission, it also depends on optical depth. For nonthermal radiation, brightness temperature generally has no direct interpretation as the matter’s thermodynamic temperature.\n\nOutside the Rayleigh–Jeans regime, a temperature inferred by inverting Planck’s law differs from the Rayleigh–Jeans brightness temperature. This distinction matters in observations of cold astronomical sources and the cosmic microwave background.\n\nThermal measurements and spectral interpretation\n\nThe law makes radiance linear in temperature at fixed frequency, simplifying some long-wavelength radiation measurements and calibration procedures. In the valid regime, a blackbody spectrum has \\(B_\\nu\\propto\\nu^2\\). A real source need not follow this dependence: frequency-dependent emissivity, absorption, optical depth, and temperature variations can alter its observed spectrum.\n\nThe Rayleigh–Jeans formula describes an ideal blackbody, or equilibrium cavity radiation. Applying it to other emitters requires an appropriate model of their emission and radiative transfer. It cannot describe the blackbody spectral peak, the high-frequency falloff, or the finite total thermal radiation emitted across all wavelengths."
    }
  ],
  "links": [
    "blackbody-radiation",
    "temperature",
    "ultraviolet-catastrophe",
    "thermodynamic-equilibrium",
    "boltzmann-constant",
    "speed-of-light",
    "energy-density",
    "equipartition-theorem",
    "polarization",
    "electromagnetic-radiation",
    "statistical-mechanics",
    "plancks-law",
    "planck-constant",
    "photon",
    "zero-point-energy",
    "max-planck",
    "energy-quantization",
    "quantum-mechanics",
    "cosmic-microwave-background",
    "calibration",
    "radiative-transfer"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}