{
  "id": "ratio-test",
  "title": "Ratio Test",
  "lang": "en",
  "source_lang": "en",
  "summary": "The ratio test determines absolute convergence or divergence of an infinite series by comparing the magnitudes of successive terms.",
  "category": "mathematics",
  "subcategory": "analysis",
  "type": "concept",
  "aliases": [
    "d’Alembert’s ratio test",
    "d’Alembert’s test"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/ratio-test/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/ratio-test/",
      "json": "https://aiwiki.page/zh/ratio-test.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The ratio test is a criterion in mathematical analysis for determining whether an infinite series converges absolutely or diverges. It examines the ratio of the magnitudes of consecutive terms: if this ratio approaches a number smaller than \\(1\\), the series converges absolutely; if it approaches a number greater than \\(1\\), the series diverges. A limiting ratio of exactly \\(1\\) gives no conclusion. Also called d’Alembert’s ratio test, it is particularly useful for series involving factorials, exponential factors, and products whose successive-term ratios simplify."
    },
    {
      "heading": "Statement",
      "text": "Consider a series\n\n\\[\\sum_{n=0}^{\\infty}a_n,\\]\n\nwhose terms are real or complex numbers. Assume that \\(a_n\\neq 0\\) for all sufficiently large \\(n\\), so the successive-term ratios are eventually defined. Suppose the limit\n\n\\[L=\\lim_{n\\to\\infty}\\left|\\frac{a_{n+1}}{a_n}\\right|\\]\n\nexists, allowing \\(L=+\\infty\\). Then:\n\n- If \\(L<1\\), the series is absolutely convergent: \\(\\sum |a_n|\\) converges, and therefore so does \\(\\sum a_n\\).\n- If \\(L>1\\), including \\(L=+\\infty\\), the series diverges because its terms do not tend to zero.\n- If \\(L=1\\), the test is inconclusive.\n\nThe absolute value is essential when terms can be negative or complex. The test compares their magnitudes, not their signs or complex phases.\n\nChanging or removing finitely many terms does not affect convergence. Consequently, finitely many zero terms or exceptional initial ratios do not prevent its application. If zero terms occur infinitely often, however, the quotient formulation cannot be applied directly to the full sequence."
    },
    {
      "heading": "Principle and proof",
      "text": "The ratio test works by comparing the tail of a series with a geometric series.\n\nConvergence when \\(L<1\\)\n\nChoose a number \\(q\\) such that\n\n\\[L<q<1.\\]\n\nBy the definition of a limit, there is an index \\(N\\) such that\n\n\\[\\left|\\frac{a_{n+1}}{a_n}\\right|\\le q \\qquad(n\\ge N).\\]\n\nRepeated application gives\n\n\\[|a_{N+k}|\\le |a_N|q^k \\qquad(k\\ge 0).\\]\n\nHence\n\n\\[\\sum_{k=0}^{\\infty}|a_{N+k}| \\le |a_N|\\sum_{k=0}^{\\infty}q^k =\\frac{|a_N|}{1-q}.\\]\n\nThe comparison test therefore establishes absolute convergence.\n\nDivergence when \\(L>1\\)\n\nChoose \\(q\\) with \\(1<q<L\\). If \\(L=+\\infty\\), any fixed \\(q>1\\) can be used. Eventually,\n\n\\[|a_{n+1}|\\ge q|a_n|,\\]\n\nso\n\n\\[|a_{N+k}|\\ge |a_N|q^k.\\]\n\nThe magnitudes grow without bound, rather than approaching zero. Since convergence of a series requires \\(a_n\\to 0\\), the series diverges.\n\nThis divergence conclusion is stronger than merely failing to establish absolute convergence: the original signed or complex series itself cannot converge."
    },
    {
      "heading": "Examples",
      "text": "Factorials in the denominator\n\nFor a fixed complex number \\(z\\), consider\n\n\\[\\sum_{n=0}^{\\infty}\\frac{z^n}{n!}.\\]\n\nWhen \\(z\\neq 0\\), the factorial identity \\((n+1)!=(n+1)n!\\) gives\n\n\\[\\left| \\frac{z^{n+1}/(n+1)!}{z^n/n!} \\right| =\\frac{|z|}{n+1}\\longrightarrow 0.\\]\n\nThus the series converges absolutely for every \\(z\\). When \\(z=0\\), convergence is immediate. This is the power-series representation of the exponential function.\n\nFactorials in the numerator\n\nFor\n\n\\[\\sum_{n=1}^{\\infty}\\frac{n!}{3^n},\\]\n\nthe successive-term ratio is\n\n\\[\\frac{(n+1)!/3^{n+1}}{n!/3^n} =\\frac{n+1}{3}\\longrightarrow+\\infty.\\]\n\nThe series diverges. Although its initial terms decrease, their eventual growth determines the result.\n\nA limiting ratio of one\n\nFor every real \\(p\\),\n\n\\[\\lim_{n\\to\\infty} \\frac{(n+1)^{-p}}{n^{-p}} = \\lim_{n\\to\\infty}\\left(\\frac{n}{n+1}\\right)^p =1.\\]\n\nYet the series\n\n\\[\\sum_{n=1}^{\\infty}\\frac{1}{n^p}\\]\n\nconverges for \\(p>1\\) and diverges for \\(p\\le 1\\).\n\nSimilarly, \\(\\sum_{n=1}^{\\infty}(-1)^{n-1}/n\\) has absolute successive-term ratios tending to \\(1\\), but is conditionally convergent. Thus a limiting ratio of \\(1\\) is compatible with absolute convergence, conditional convergence, or divergence."
    },
    {
      "heading": "Versions without a ratio limit",
      "text": "Existence of a ratio limit is sufficient but not necessary for geometric comparison. Assuming the terms are eventually nonzero:\n\n- If some \\(q<1\\) satisfies\n\n\\[\\left|\\frac{a_{n+1}}{a_n}\\right|\\le q\\]\n\nfor every sufficiently large \\(n\\), the series converges absolutely.\n- If\n\n\\[\\left|\\frac{a_{n+1}}{a_n}\\right|\\ge 1\\]\n\nfor every sufficiently large \\(n\\), the magnitudes are eventually nondecreasing and bounded below by a positive number, so the series diverges.\n\nUsing the limit superior and limit inferior, useful sufficient conditions are\n\n\\[\\limsup_{n\\to\\infty}\\left|\\frac{a_{n+1}}{a_n}\\right|<1 \\quad\\Longrightarrow\\quad \\text{absolute convergence},\\]\n\nand\n\n\\[\\liminf_{n\\to\\infty}\\left|\\frac{a_{n+1}}{a_n}\\right|>1 \\quad\\Longrightarrow\\quad \\text{divergence}.\\]\n\nA limit superior greater than \\(1\\) alone does not establish divergence. Large upward jumps can be offset by larger downward jumps."
    },
    {
      "heading": "Application to power series",
      "text": "For a power series\n\n\\[\\sum_{n=0}^{\\infty}c_n(z-z_0)^n,\\]\n\nsuppose the coefficients are eventually nonzero and\n\n\\[\\ell=\\lim_{n\\to\\infty}\\left|\\frac{c_{n+1}}{c_n}\\right|\\]\n\nexists. For \\(z\\neq z_0\\), the ratio of successive term magnitudes tends to\n\n\\[\\ell|z-z_0|.\\]\n\nIf \\(0<\\ell<\\infty\\), the radius of convergence is therefore\n\n\\[R=\\frac{1}{\\ell}.\\]\n\nThe series converges absolutely when \\(|z-z_0|<R\\) and diverges when \\(|z-z_0|>R\\). On the boundary \\(|z-z_0|=R\\), the ratio test is inconclusive and convergence must be examined separately.\n\nIf \\(\\ell=0\\), the radius is infinite. If \\(\\ell=+\\infty\\), the radius is zero, and the series converges only at its center. These applications are important for Taylor series and series solutions of differential equations."
    },
    {
      "heading": "Relationship to the root test",
      "text": "The root test examines\n\n\\[\\rho=\\limsup_{n\\to\\infty}|a_n|^{1/n}.\\]\n\nIt establishes absolute convergence when \\(\\rho<1\\) and divergence when \\(\\rho>1\\).\n\nWhen the successive absolute ratios have a limit \\(L\\), the \\(n\\)th roots also tend to \\(L\\), so the two tests agree. The root test can nevertheless succeed when the ratio test is inconclusive. For example, define\n\n\\[a_{2k}=4^{-k}, \\qquad a_{2k+1}=4^{-k} \\qquad(k\\ge 0).\\]\n\nThe successive ratios alternate between \\(1\\) and \\(1/4\\). Their limit does not exist, and their limit superior is \\(1\\). However,\n\n\\[\\lim_{n\\to\\infty}|a_n|^{1/n}=\\frac12,\\]\n\nso the root test establishes convergence.\n\nThe ratio test is often algebraically simpler for factorials and products, whereas the root test is especially convenient for terms containing \\(n\\)th powers."
    }
  ],
  "links": [
    "mathematical-analysis",
    "infinite-series",
    "real-number",
    "complex-number",
    "limit",
    "absolute-convergence",
    "absolute-value",
    "geometric-series",
    "factorial",
    "exponential-function",
    "power-series",
    "radius-of-convergence",
    "taylor-series",
    "root-test"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}