{
  "id": "radium",
  "title": "Radium",
  "lang": "en",
  "source_lang": "en",
  "summary": "Radium is a highly radioactive alkaline-earth metal, discovered in 1898, whose isotopes occur in natural decay chains and have historical and specialized medical uses.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/radium/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/radium/",
      "json": "https://aiwiki.page/zh/radium.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Radium is a chemical element with the symbol Ra and atomic number 88. It is a silvery-white metal in group 2 of the periodic table, the alkaline-earth metals. All its isotopes are radioactive. The longest-lived, radium-226, has a half-life of about 1,600 years and occurs naturally as a decay product of uranium. Discovered in 1898, radium became important in the study of radioactivity, early cancer treatment, and luminous paints before its radiation hazards led to the abandonment of most consumer and industrial uses."
    },
    {
      "heading": "Physical and chemical properties",
      "text": "Radium is the heaviest alkaline-earth metal. Its electron configuration is conventionally written \\([\\mathrm{Rn}]\\,7s^2\\). Like the other members of its group, it readily loses its two outermost electrons and forms compounds in the +2 oxidation state. Its chemistry closely resembles that of barium, which made separating the two elements a central difficulty in early radium research.\n\nFreshly prepared radium metal is silvery-white but darkens on exposure to air. Its melting point is approximately \\(700\\,^\\circ\\mathrm{C}\\). It reacts with water to produce radium hydroxide and hydrogen:\n\n\\[\\mathrm{Ra + 2H_2O \\rightarrow Ra(OH)_2 + H_2}.\\]\n\nRadium chloride and radium nitrate are soluble in water, whereas radium sulfate is extremely insoluble. Radium can therefore be concentrated by coprecipitation with barium sulfate: radium ions become incorporated into, or carried down with, the precipitating solid. This behavior is important both in chemical separation and in the environmental distribution of radium.\n\nRadium compounds were historically described as self-luminous. Their radiation can excite surrounding materials and produce faint light, but the bright glow of commercial radium paint came principally from a phosphor, usually zinc sulfide, mixed with a radium salt. The radioactive material supplied energy to the phosphor; ordinary visible light was not the direct product of nuclear decay."
    },
    {
      "heading": "Isotopes and radioactive decay",
      "text": "Radium has no stable isotopes and therefore no standard atomic weight based on a stable natural isotopic composition. Periodic tables commonly show [226], identifying the mass number of its longest-lived isotope rather than an average atomic weight.\n\nFour naturally occurring isotopes are particularly important:\n\nIsotope | Approximate half-life | Natural decay series | Principal decay mode\nRadium-223 | 11.4 days | Uranium-235 series | Alpha decay\nRadium-224 | 3.63 days | Thorium-232 series | Alpha decay\nRadium-226 | 1,600 years | Uranium-238 series | Alpha decay\nRadium-228 | 5.75 years | Thorium-232 series | Beta decay\n\nA half-life is the time required for half the radioactive nuclei in a sample to decay. Radium-226 undergoes alpha decay, producing radon-222 and an alpha particle, which is a helium-4 nucleus:\n\n\\[{}^{226}_{88}\\mathrm{Ra} \\rightarrow {}^{222}_{86}\\mathrm{Rn} + {}^{4}_{2}\\mathrm{He}.\\]\n\nRadium-228 instead undergoes beta decay to actinium-228. Subsequent transformations in radium decay chains produce additional radioactive substances. Consequently, the radiation emitted by a radium-containing object depends not only on the radium isotope but also on the accumulation, loss, and chemical separation of its decay products.\n\nPure radium-226 has a specific activity of approximately \\(3.7\\times10^{10}\\) decays per second per gram. This value is close to one curie, a historical unit of radioactive activity. The curie is now defined exactly as \\(3.7\\times10^{10}\\) decays per second, independently of any physical radium sample. Radioactive activity measures decay rate, not the biological dose received by a person."
    },
    {
      "heading": "Discovery and isolation",
      "text": "In 1898, Marie Curie and Pierre Curie investigated why some uranium minerals were more radioactive than their uranium content alone could explain. Their work showed that these minerals contained additional radioactive constituents.\n\nIn December 1898, the Curies and Gustave Bémont announced evidence for radium in material chemically associated with barium. A previously unrecognized spectral line provided important evidence that a new element was present. The name radium derives from the Latin radius, meaning “ray.”\n\nThe initial discovery did not involve isolating a visible piece of pure metal. Radium occurred in exceedingly small quantities and had to be concentrated from large amounts of mineral-processing residues. Repeated fractional crystallization of radium and barium salts gradually increased the radium concentration.\n\nMarie Curie subsequently prepared sufficiently pure radium chloride to determine the element’s atomic weight. In 1910, she and André Debierne isolated metallic radium using electrolysis to form a radium–mercury amalgam, followed by removal of the mercury. Her work on radium and polonium, including the isolation of radium and investigation of its compounds, was recognized by the 1911 Nobel Prize in Chemistry.\n\nRadium also became an important experimental source in early nuclear physics. Its alpha particles and decay products helped researchers investigate radioactive transformations and the structure of matter."
    },
    {
      "heading": "Natural occurrence and environmental behavior",
      "text": "Radium is continuously produced in the decay chains of uranium and thorium. It occurs in trace quantities in rocks, soils, mineral waters, and seawater. Because even radium-226 is short-lived compared with Earth’s age, naturally occurring radium is maintained by decay of longer-lived parent isotopes rather than surviving unchanged from Earth’s formation.\n\nRadium is usually present as the dissolved ion \\(\\mathrm{Ra}^{2+}\\) or within mineral structures. Its movement depends on water chemistry, mineral surfaces, and the availability of sulfate and other substances that form poorly soluble compounds. Adsorption and coprecipitation can retain it in sediments, while other conditions allow it to enter groundwater.\n\nRadium isotopes are used as tracers of water movement and exchange. Their different half-lives make them useful over different timescales, including studies of groundwater discharge to coastal waters, sediment–water exchange, and ocean mixing.\n\nIndustrial processes can redistribute naturally occurring radium. Uranium mining and milling, some phosphate-processing operations, and oil and gas production can concentrate it in residues, sludges, or mineral scale. These materials are examples of naturally occurring radioactive material whose distribution or concentration has been altered by human activity."
    },
    {
      "heading": "Applications",
      "text": "Luminous paints\n\nDuring the early and mid-20th century, radium salts mixed with phosphors were used on watches, clocks, aircraft instruments, and other displays. The paint required no external electrical supply.\n\nThe visible brightness of such paint can decline as radiation damages the phosphor, even though much of the radium remains. An old dial that no longer glows may therefore still be radioactive.\n\nMedicine\n\nRadium salts were among the first radioactive sources used to treat cancer. Sealed radium sources were placed close to or within tumors in an early form of brachytherapy. Radium-226 was later largely replaced by sources with more suitable handling and radiation characteristics, as well as by other treatment technologies.\n\nRadium-223 dichloride has a distinct modern medical application. It is used for selected patients with castration-resistant prostate cancer, symptomatic bone metastases, and no known visceral metastatic disease. Its distribution reflects radium’s chemical similarity to calcium: it localizes preferentially at sites of increased bone formation. Its short-range alpha radiation delivers energy to nearby tissue. This controlled pharmaceutical use is fundamentally different from historical radium-containing consumer products.\n\nResearch and measurement\n\nRadium sources formerly served as radiation standards and, when combined with beryllium, as neutron sources. These applications have largely been superseded by other radionuclides or electrically generated radiation. Radium remains relevant to environmental tracing, radioactive-decay research, and specialized isotope production."
    },
    {
      "heading": "Health hazards and historical legacy",
      "text": "Radium presents both internal and external radiation hazards. If incorporated into the body, some radium can accumulate in the skeleton because of its chemical resemblance to calcium. Radiation from radium and its decay products can then expose nearby bone and marrow. Historical occupational exposure established a connection between substantial internal radium exposure and bone cancers.\n\nWorkers who painted luminous dials, often called the Radium Girls, became prominent examples of industrial radiation injury. Some were instructed to shape paintbrush tips with their lips, ingesting radium-containing paint. Their illnesses and legal cases contributed to recognition of occupational radiation hazards and stronger workplace protections.\n\nRadium was also marketed in purported health tonics and other consumer products before its risks were adequately understood. Such historical marketing claims are not evidence of therapeutic benefit.\n\nExternal exposure can arise from penetrating radiation, particularly gamma rays emitted by decay products. Radium-226 also generates radon-222, a radioactive gas that may escape from a source and create a separate inhalation pathway. As a result, the hazards of radium-bearing materials depend on their physical condition, containment, decay-product inventory, and routes of exposure—not simply on whether the material emits visible light."
    }
  ],
  "links": [
    "chemical-element",
    "atomic-number",
    "periodic-table",
    "isotope",
    "radioactivity",
    "electron-configuration",
    "oxidation-state",
    "water",
    "mass-number",
    "half-life",
    "alpha-decay",
    "beta-decay",
    "marie-curie",
    "electrolysis",
    "nobel-prize-in-chemistry",
    "adsorption",
    "groundwater",
    "cancer",
    "brachytherapy",
    "gamma-ray"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}