{
  "id": "radioactive-activity",
  "title": "Radioactive Activity",
  "lang": "en",
  "source_lang": "en",
  "summary": "Radioactive activity is the expected number of spontaneous nuclear transformations per unit time in a specified quantity of radioactive material.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Activity",
    "Radionuclide activity",
    "Decay rate"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/radioactive-activity/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/radioactive-activity/",
      "json": "https://aiwiki.page/zh/radioactive-activity.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Radioactive activity, usually denoted by \\(A\\), is the expected rate at which spontaneous nuclear transformations occur in a specified quantity of radioactive material. It quantifies the rate of radioactive decay, rather than the number of radioactive nuclei present, the number of particles emitted, or the biological effects of the radiation. Its SI unit is the becquerel (Bq), equal to one nuclear transformation per second."
    },
    {
      "heading": "Definition and physical basis",
      "text": "For a population of \\(N\\) identical radioactive nuclei, each having a constant decay probability per unit time \\(\\lambda\\), the activity is\n\n\\[A=\\lambda N.\\]\n\nThe quantity \\(\\lambda\\), called the decay constant, has units of inverse time. It characterizes a particular radioactive nuclear state and is related to its half-life \\(T_{1/2}\\) by\n\n\\[\\lambda=\\frac{\\ln 2}{T_{1/2}}.\\]\n\nConsequently,\n\n\\[A=\\frac{\\ln 2}{T_{1/2}}N.\\]\n\nFor equal numbers of radioactive nuclei, a shorter half-life therefore means a greater activity. A small quantity of a short-lived radionuclide can have a higher activity than a much larger quantity of a long-lived one.\n\nRadioactive transformations include alpha decay, beta decay, and transitions between nuclear energy states. Activity counts transformations, not individual emitted particles or photons. One transformation can produce several emissions, and some transformations do not emit a readily detectable photon.\n\nA statistical quantity\n\nAn individual atomic nucleus decays unpredictably. Activity describes an expected rate, not a guarantee that a fixed number of transformations occurs during every second.\n\nFor independent decays over an interval short enough that activity changes negligibly, the number of transformations is commonly described by a Poisson distribution. If the expected number during a measurement is \\(\\mu\\), the standard deviation is approximately \\(\\sqrt{\\mu}\\). Thus, statistical precision generally improves as more events are recorded.\n\nFor a closed population depleted only by radioactive decay, the usual macroscopic decay equation is\n\n\\[A=-\\frac{dN}{dt}.\\]\n\nThis expression requires care: if radioactive nuclei are also being produced, entering, or leaving the system, the net change in \\(N\\) is not equal to the negative activity. The activity remains \\(\\lambda N\\), while the inventory equation must include those additional processes."
    },
    {
      "heading": "Units",
      "text": "The becquerel is a derived unit of the International System of Units:\n\n\\[1\\ \\mathrm{Bq}=1\\ \\mathrm{s}^{-1}.\\]\n\nAlthough it has the same dimensions as frequency, activity is not expressed in hertz. The name becquerel identifies the quantity as a rate of radioactive transformations rather than a rate of periodic cycles.\n\nCommon multiples include the kilobecquerel, megabecquerel, and gigabecquerel:\n\n\\[1\\ \\mathrm{kBq}=10^3\\ \\mathrm{Bq},\\qquad 1\\ \\mathrm{MBq}=10^6\\ \\mathrm{Bq},\\qquad 1\\ \\mathrm{GBq}=10^9\\ \\mathrm{Bq}.\\]\n\nThe older non-SI unit curie (Ci), historically associated with the activity of radium, is defined exactly as\n\n\\[1\\ \\mathrm{Ci}=3.7\\times10^{10}\\ \\mathrm{Bq}.\\]\n\nA disintegration per minute, often abbreviated dpm, is another rate unit:\n\n\\[1\\ \\mathrm{Bq}=60\\ \\mathrm{dpm}.\\]\n\nDisintegrations per minute must not be confused with detector counts per minute. The latter describe instrument responses, not necessarily all transformations in the source."
    },
    {
      "heading": "Change with time",
      "text": "For a single radionuclide with constant decay constant, no production, and no physical removal, the population follows exponential decay:\n\n\\[N(t)=N_0e^{-\\lambda t}.\\]\n\nIts activity follows the same law:\n\n\\[A(t)=A_0e^{-\\lambda t} =A_0\\,2^{-t/T_{1/2}}.\\]\n\nAfter one half-life, the activity is half its initial value; after two half-lives, it is one-quarter. Activity values therefore need a reference date and time whenever decay over the relevant interval is appreciable.\n\nThe expected number of transformations between \\(t_1\\) and \\(t_2\\) is the time-integrated activity:\n\n\\[\\int_{t_1}^{t_2}A(t)\\,dt =\\frac{A_0}{\\lambda} \\left(e^{-\\lambda t_1}-e^{-\\lambda t_2}\\right).\\]\n\nThis integral is useful when the cumulative number of transformations matters more than the instantaneous rate.\n\nMixtures and decay chains\n\nFor a mixture of radionuclides, total activity is the sum of the component activities:\n\n\\[A_{\\mathrm{total}}=\\sum_i\\lambda_iN_i.\\]\n\nA mixture generally does not have a single exponential decay curve because its components have different half-lives.\n\nIn a radioactive decay chain, a parent radionuclide produces a daughter that may itself be radioactive. The daughter inventory then obeys a production-and-decay equation. For a simple chain with branching fraction \\(b\\),\n\n\\[\\frac{dN_D}{dt}=b\\lambda_PN_P-\\lambda_DN_D.\\]\n\nDaughter activity can initially increase even while the parent activity decreases. If the parent half-life is much longer than the daughter half-life and the daughter remains in the sample, approximate secular equilibrium can develop. With a branching fraction of one, daughter activity then approaches parent activity. A stated “total activity” must therefore make clear whether daughter contributions are included."
    },
    {
      "heading": "Activity relative to material quantity",
      "text": "Activity alone does not describe how concentrated radioactive material is. Several normalized quantities are used.\n\n- Activity concentration expresses activity per unit volume, commonly in Bq/m³ or Bq/L.\n- Massic activity expresses activity per unit mass, commonly in Bq/kg.\n- Specific activity often means activity per unit mass, but its denominator depends on context: it may refer to the mass of the radionuclide, a chemical compound, or the entire sample.\n- Molar activity expresses activity per unit amount of substance, commonly in Bq/mol.\n\nFor a pure radionuclide of mass \\(m\\) and molar mass \\(M\\),\n\n\\[N=\\frac{m}{M}N_{\\mathrm A},\\]\n\nwhere \\(N_{\\mathrm A}\\) is the Avogadro constant. Its activity per unit mass is therefore\n\n\\[\\frac{A}{m} =\\frac{\\lambda N_{\\mathrm A}}{M} =\\frac{N_{\\mathrm A}\\ln 2}{MT_{1/2}}.\\]\n\nThe units of \\(m\\) and \\(M\\) must be consistent. Adding stable carrier material lowers activity per unit total mass without necessarily changing the total activity of the radioactive component."
    },
    {
      "heading": "Measurement",
      "text": "Activity is usually inferred from radiation measurements rather than by observing every nuclear transformation. Common instruments include gas-filled detectors, scintillation counters, semiconductor detectors, and liquid scintillation counters.\n\nA detector records a count rate, which depends on both source activity and measurement conditions. For a selected radiation emission, a simplified relation is\n\n\\[R_{\\mathrm{net}}=A\\,p\\,\\varepsilon,\\]\n\nwhere:\n\n- \\(R_{\\mathrm{net}}\\) is the background-subtracted count rate;\n- \\(p\\) is the mean number of the selected emissions per transformation;\n- \\(\\varepsilon\\) is the probability that such an emission produces an accepted count.\n\nThus,\n\n\\[A=\\frac{R_{\\mathrm{net}}}{p\\varepsilon}.\\]\n\nThis expression assumes that other relevant effects have been corrected or are negligible. Such effects include absorption within the sample, source–detector geometry, electronic dead time, pulse pile-up, coincidence summing, and decay during measurement. An instrument’s intrinsic detection efficiency is not necessarily the same as the overall efficiency for a particular sample arrangement.\n\nGamma-ray spectroscopy can identify radionuclides through characteristic photon energies and determine their activities using calibrated detection efficiencies. Some primary measurement methods use coincidence counting or other techniques that reduce dependence on a separately calibrated activity standard.\n\nReliable results require calibration, metrological traceability, and an appropriate evaluation of measurement uncertainty. At low activities, background variation and counting statistics become especially important. Failure to detect a statistically significant signal does not establish that the activity is exactly zero."
    },
    {
      "heading": "Distinction from radiation dose and power",
      "text": "Activity characterizes the source. It does not, by itself, specify radiation exposure or biological effect.\n\nAbsorbed dose is the energy deposited by ionizing radiation per unit mass, measured in grays. Radiation-protection quantities such as equivalent and effective dose are measured in sieverts and incorporate weighting factors. Neither can be converted from becquerels by a universal numerical factor.\n\nThe relationship depends on the radionuclide, radiation energies and yields, source geometry, shielding, exposure duration, and how radioactive material is distributed relative to the exposed matter. For material inside an organism, retention and biological distribution also matter. Equal activities of different radionuclides can therefore produce substantially different doses.\n\nActivity also differs from radioactive power. If \\(\\overline{E}\\) is the mean energy released per transformation, the corresponding energy-release rate is\n\n\\[P=A\\overline{E}.\\]\n\nThe power deposited locally may be smaller because some energy escapes, for example in penetrating photons or neutrinos."
    },
    {
      "heading": "Applications",
      "text": "Activity measurements provide a common quantitative basis for radioactive-source characterization, environmental monitoring, industrial tracing, and radioactive-waste assessment. They allow laboratories to compare samples and follow changes caused by decay, transport, production, or chemical separation.\n\nIn radiometric dating, activity can help constrain the time elapsed since a system acquired its initial radionuclide composition, provided the relevant initial conditions and subsequent material exchanges are understood. In tracer studies, changes in activity or activity concentration reveal the movement and distribution of labeled material. In radionuclide production, measured activity at a specified reference time characterizes the radioactive output, while the usefulness of that output also depends on radionuclide identity, purity, and half-life."
    }
  ],
  "links": [
    "radioactivity",
    "becquerel",
    "half-life",
    "alpha-decay",
    "beta-decay",
    "atomic-nucleus",
    "poisson-distribution",
    "international-system-of-units",
    "radioactive-decay-chain",
    "amount-of-substance",
    "molar-mass",
    "avogadro-constant",
    "gamma-ray",
    "spectroscopy",
    "calibration",
    "metrological-traceability",
    "measurement-uncertainty",
    "absorbed-dose",
    "radiometric-dating"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}