{
  "id": "radian",
  "title": "Radian",
  "lang": "en",
  "source_lang": "en",
  "summary": "The radian is the SI unit of plane angle, defined by the ratio of a circular arc’s length to its radius.",
  "category": "mathematics",
  "subcategory": "geometry",
  "type": "concept",
  "aliases": [
    "Circular measure"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/radian/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/radian/",
      "json": "https://aiwiki.page/zh/radian.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The radian, symbol rad, is the unit of plane angle in the International System of Units (SI). An angle of one radian subtends an arc of a circle whose length equals the circle’s radius. More generally, an angle’s radian measure is the ratio of its intercepted arc length to the radius. A complete revolution measures \\(2\\pi\\) radians, where \\pi is the ratio of a circle’s circumference to its diameter. Radians are the standard angular measure in calculus, mathematical analysis, and much of physics because they give fundamental formulas their simplest form."
    },
    {
      "heading": "Geometric definition",
      "text": "For a circle of radius \\(r>0\\), let \\(s\\) be the length of an arc intercepted by a central angle. The angle’s radian measure is\n\n\\[\\theta=\\frac{s}{r}.\\]\n\nThis ratio does not depend on the size of the circle: increasing the radius by a given factor increases the arc length subtended by the same angle by that factor. Thus radian measure describes the angle rather than any particular circle used to measure it.\n\nWhen \\(s=r\\), the angle is one radian. Since a circle’s circumference is \\(2\\pi r\\), one complete revolution has measure\n\n\\[\\frac{2\\pi r}{r}=2\\pi.\\]\n\nOn a circle of radius one, an angle’s radian measure is numerically equal to its intercepted arc length.\n\nFor directed angles, a sign convention distinguishes the two directions of rotation. In the usual orientation of the Cartesian plane, counterclockwise rotation is positive and clockwise rotation is negative. Angles may also record multiple revolutions, so their measures need not lie between \\(0\\) and \\(2\\pi\\)."
    },
    {
      "heading": "Conversion to other angular units",
      "text": "The degree divides a full revolution into \\(360\\) equal parts. Consequently,\n\n\\[2\\pi\\ \\mathrm{rad}=360^\\circ, \\qquad \\pi\\ \\mathrm{rad}=180^\\circ.\\]\n\nThe conversion formulas are\n\n\\[\\theta_{\\mathrm{rad}} =\\frac{\\pi}{180}\\theta_{\\mathrm{deg}}, \\qquad \\theta_{\\mathrm{deg}} =\\frac{180}{\\pi}\\theta_{\\mathrm{rad}},\\]\n\nwhere the subscripts identify the numerical measures in the two units. In particular,\n\n\\[1\\ \\mathrm{rad} =\\frac{180}{\\pi}^\\circ \\approx57.2958^\\circ.\\]\n\nSome common angles are:\n\nAngle | Degrees | Radians\nFull revolution | \\(360^\\circ\\) | \\(2\\pi\\)\nStraight angle | \\(180^\\circ\\) | \\(\\pi\\)\nRight angle | \\(90^\\circ\\) | \\(\\pi/2\\)\nHalf a right angle | \\(45^\\circ\\) | \\(\\pi/4\\)\nOne sixth of a revolution | \\(60^\\circ\\) | \\(\\pi/3\\)\nOne twelfth of a revolution | \\(30^\\circ\\) | \\(\\pi/6\\)\n\nA turn is another angular unit, equal to one complete revolution or \\(2\\pi\\) radians. Degrees, turns, and radians describe the same geometric quantities with different numerical scales."
    },
    {
      "heading": "Status in the SI",
      "text": "The radian is a coherent derived SI unit with the special symbol \\(\\mathrm{rad}\\). Its defining ratio is a length divided by a length, so it has dimension one:\n\n\\[1\\ \\mathrm{rad}=1\\ \\mathrm{m}/\\mathrm{m}=1.\\]\n\nThis does not make the radian interchangeable in meaning with every other dimensionless quantity. The symbol identifies a quantity as a plane angle and helps distinguish it from a ratio, count, or other quantity with dimension one.\n\nThe unit symbol is written upright and separated from the numerical value by a space, as in \\(2\\ \\mathrm{rad}\\). In mathematical formulas, it is commonly omitted when the convention of radian measure is understood.\n\nThe radian and the steradian, the SI unit of solid angle, formerly belonged to a separate class called supplementary units. In 1995, this class was abolished, and both were classified as dimensionless derived units."
    },
    {
      "heading": "Why radians are natural in analysis",
      "text": "Trigonometric functions\n\nIn trigonometry, radians connect angular quantities directly to arc length. Their analytical importance is expressed by the limit\n\n\\[\\lim_{x\\to0}\\frac{\\sin x}{x}=1,\\]\n\nwhich holds when \\(x\\) is the numerical measure in radians.\n\nThis normalization gives the familiar derivative formulas for trigonometric functions:\n\n\\[\\frac{d}{dx}\\sin x=\\cos x, \\qquad \\frac{d}{dx}\\cos x=-\\sin x.\\]\n\nIf \\(x\\) instead denotes a numerical angle in degrees, the corresponding sine function is \\(\\sin(\\pi x/180)\\). By the chain rule, its derivative is\n\n\\[\\frac{d}{dx}\\sin\\left(\\frac{\\pi x}{180}\\right) = \\frac{\\pi}{180}\\cos\\left(\\frac{\\pi x}{180}\\right).\\]\n\nThe additional factor comes from the choice of angular scale, not from a different geometric relationship.\n\nSeries and approximations\n\nThe standard Taylor series for sine and cosine likewise use radian arguments:\n\n\\[\\sin x=x-\\frac{x^3}{3!}+\\frac{x^5}{5!}-\\cdots,\\]\n\n\\[\\cos x=1-\\frac{x^2}{2!}+\\frac{x^4}{4!}-\\cdots.\\]\n\nFor small \\(|x|\\), these give\n\n\\[\\sin x\\approx x, \\qquad \\tan x\\approx x, \\qquad \\cos x\\approx1-\\frac{x^2}{2}.\\]\n\nThese approximations require \\(x\\) to be expressed in radians. Their accuracy depends on the magnitude of \\(x\\) and the error tolerance of the application.\n\nComplex exponentials\n\nRadians also appear naturally in Euler’s formula, which connects the exponential function with circular motion:\n\n\\[e^{i\\theta}=\\cos\\theta+i\\sin\\theta.\\]\n\nHere \\(\\theta\\) is the radian measure of rotation on the unit circle in the complex plane. Increasing \\(\\theta\\) by \\(2\\pi\\) leaves the point unchanged:\n\n\\[e^{i(\\theta+2\\pi)}=e^{i\\theta}.\\]\n\nThis relationship underlies the use of radian phase in oscillations, waves, and Fourier analysis."
    },
    {
      "heading": "Geometric and physical applications",
      "text": "Several geometric formulas take especially simple forms when angles are measured in radians. For a circular arc,\n\n\\[s=r\\theta.\\]\n\nFor a circular sector with nonnegative angle \\(\\theta\\), its area is\n\n\\[A=\\frac12r^2\\theta.\\]\n\nIn polar coordinates, \\(\\theta\\) specifies direction from a reference axis. Points with coordinates \\((r,\\theta)\\) and \\((r,\\theta+2\\pi k)\\), where \\(k\\) is an integer, have the same location.\n\nIn rotational motion, angular velocity is the rate of change of angular displacement:\n\n\\[\\omega=\\frac{d\\theta}{dt}.\\]\n\nIt is commonly expressed in radians per second. For motion along a circle of fixed radius, the signed tangential velocity is \\(v=r\\omega\\); the speed is \\(r|\\omega|\\).\n\nAngular frequency and ordinary frequency differ by a factor of \\(2\\pi\\):\n\n\\[\\omega=2\\pi f.\\]\n\nOrdinary frequency \\(f\\), measured in hertz, counts cycles per second; angular frequency \\(\\omega\\), measured in radians per second, measures phase change per second. Although both units reduce dimensionally to inverse seconds, they describe different quantities and are not numerically interchangeable."
    },
    {
      "heading": "History and practical conventions",
      "text": "Arc-based measurement of angles predates the word radian. The term is associated with James Thomson and appeared in a printed examination he set at Queen’s College, Belfast, in 1873. Its adoption supplied a convenient name for an angular measure already useful in mathematical analysis.\n\nIn modern mathematics, an unqualified real argument of a trigonometric function normally uses the radian convention. Scientific calculators often offer separate degree and radian modes, while most standard programming-library trigonometric functions take radian arguments. Confusing these conventions can produce large numerical errors even when the underlying formula is correct.\n\nRadians do not replace degrees in every context. Degrees remain common in navigation, surveying, and everyday descriptions of direction; radians are especially useful where angles interact with differentiation, integration, oscillation, or rotational dynamics."
    }
  ],
  "links": [
    "international-system-of-units",
    "circle",
    "pi",
    "calculus",
    "steradian",
    "trigonometry",
    "limit",
    "derivative",
    "trigonometric-functions",
    "chain-rule",
    "taylor-series",
    "eulers-formula",
    "exponential-function",
    "complex-number",
    "polar-coordinates"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}