{
  "id": "pyrolysis",
  "title": "Pyrolysis",
  "lang": "en",
  "source_lang": "en",
  "summary": "Pyrolysis is the thermal decomposition of materials without an external oxidant, producing gases, condensable vapors, and solid residues.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Pyrolytic decomposition",
    "Thermal cracking"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/pyrolysis/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/pyrolysis/",
      "json": "https://aiwiki.page/zh/pyrolysis.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Pyrolysis is the chemical decomposition of a material by heating in the absence, or substantial exclusion, of an external oxidizing agent. It breaks and rearranges chemical bonds, converting a feedstock into some combination of permanent gases, condensable vapors, and solid residue. Most industrial uses concern organic materials, including wood, coal, petroleum fractions, agricultural residues, and plastics, although the term also applies to the thermal decomposition of certain inorganic compounds. Unlike combustion, pyrolysis does not depend on a continuing supply of oxygen to oxidize the feedstock; unlike gasification, it does not principally aim to convert carbonaceous material into gas through reaction with a controlled oxidant.\n\nPyrolysis is both a natural process and a family of industrial technologies. It occurs as vegetation heats ahead of a wildfire’s flame front, contributes to the generation of combustible vapors from burning solids, and underlies charcoal manufacture, metallurgical coke production, and several routes for making chemicals and fuels. Its outcome depends not simply on the final temperature, but also on heating rate, residence time, feed composition, particle size, reactor design, and the removal or further reaction of vapors. Understanding those interactions is essential to distinguishing established applications from developing proposals for waste treatment and carbon management."
    },
    {
      "heading": "Historical development and industrial significance",
      "text": "The deliberate pyrolysis of wood predates modern chemistry. Traditional charcoal makers heated stacked wood beneath coverings of earth or other materials that restricted air entry. Some wood burned to supply the heat, while the remainder underwent oxygen-limited decomposition. The product, charcoal, provided a fuel with less moisture and volatile matter than the original wood and was important in metalworking because it could sustain high temperatures and participate in the reduction of metal ores. These early systems combined combustion and pyrolysis in different parts of the same installation rather than operating as perfectly oxygen-free vessels.\n\nA major development was the substitution of coal-derived coke for charcoal in ironmaking. Abraham Darby’s use of coke at Coalbrookdale in 1709 became an important landmark in the development of coke-fueled blast furnaces. Heating suitable coal without air removes volatile constituents and produces a strong, porous carbon-rich material. Coke subsequently became indispensable to large-scale ironmaking because it serves not only as fuel and reductant but also as a mechanically supportive burden through which furnace gases can pass.\n\nDuring the eighteenth and nineteenth centuries, the destructive distillation of wood and coal became a source of saleable liquids and gases. Wood distillation supplied charcoal, acetic acid, methanol, and complex tar fractions. Coal carbonization produced illuminating gas, coke, ammonia-bearing liquor, and coal tar. William Murdoch’s experiments with coal-gas lighting in the 1790s were part of the transition toward municipal gas industries. The later chemical processing of coal tar supplied aromatic compounds used in dyes, pharmaceuticals, and other products. Here, pyrolysis was one stage in an integrated system that also required cooling, separation, purification, and chemical conversion.\n\nIn the twentieth century, petroleum processing greatly expanded the scale and precision of thermal decomposition. Thermal cracking converted heavy petroleum molecules into lighter products, while high-temperature steam cracking became a principal source of ethylene and other basic petrochemicals. Coke ovens likewise evolved into integrated installations recovering fuel gas and chemical by-products. These developments made control of temperature history and reaction time central engineering concerns.\n\nInterest in biomass fast pyrolysis accelerated during the energy research programs of the 1970s and subsequent decades. Later work increasingly emphasized waste plastics, renewable chemical feedstocks, and carbon-rich soil amendments. These newer applications draw on old thermal principles but face different economic and environmental constraints. A process optimized for metallurgical coke, for example, cannot be assessed using the same product criteria as one intended to maximize a transportable liquid or a persistent carbon residue."
    },
    {
      "heading": "Chemical pathways and reaction energetics",
      "text": "Pyrolysis begins when thermal motion enables a material to undergo bond cleavage, elimination, rearrangement, or related chemical transformations. It is therefore a chemical reaction, not simply melting or boiling. Distillation ideally separates existing substances through differences in volatility; pyrolysis changes molecular identity. In practice, evaporation, melting, and decomposition often occur together, especially when complex feedstocks contain both volatile and nonvolatile components.\n\nFor many hydrocarbons and polymers, an important initiating step is homolytic bond cleavage, in which the electrons of a bond are divided between two fragments. The resulting free radicals undergo hydrogen abstraction, addition, recombination, and chain scission. In a long hydrocarbon radical, beta scission can produce a smaller radical and an alkene. Repeated reactions create a broad distribution of molecular sizes rather than one product. Other materials decompose through concerted reactions, ionic pathways, or depolymerization, so a radical mechanism is not a universal description.\n\nOxygen-containing feedstocks undergo additional reactions. Dehydration removes water; decarboxylation releases carbon dioxide; and decarbonylation produces carbon monoxide. Fragmentation produces acids, aldehydes, ketones, alcohols, and other oxygenated molecules. Simultaneously, condensation and cross-linking can create increasingly aromatic, less volatile structures. These routes help explain why the absence of external oxygen does not prevent the formation of oxygen-containing gases: the oxygen may already be present in the feedstock.\n\nThe reactions directly experienced by the starting material are usually called primary pyrolysis reactions. Their products may then undergo secondary cracking, polymerization, reforming, or deposition on hot surfaces. A vapor produced within a wood particle may escape rapidly and be condensed, or it may spend enough time in a hot pore to form gas and additional char. The collected products therefore reflect a reaction network coupled to transport, not merely the first bond-breaking events.\n\nMany important pyrolysis operations require a net input of heat, but the statement that every pyrolysis reaction is endothermic is incorrect. Bond breaking consumes energy, whereas formation of new bonds releases it; char-forming reactions and other transformations can be exothermic. The overall heat requirement also includes warming the feedstock, evaporating moisture, and compensating for heat losses. The enthalpy change depends on feed composition and the final products. Product distributions are often far from chemical equilibrium, because finite reaction times and rapid cooling preserve intermediates that would transform further under prolonged heating."
    },
    {
      "heading": "Temperature, time, and transport",
      "text": "Temperature affects both the rate of decomposition and the competing routes available to reacting molecules. A simplified rate constant is often expressed through the Arrhenius relation,\n\n\\[k(T)=A\\exp\\left(-\\frac{E_a}{RT}\\right),\\]\n\nwhere \\(A\\) is a pre-exponential factor, \\(E_a\\) is the activation energy, \\(R\\) is the gas constant, and \\(T\\) is absolute temperature. Real feedstocks commonly require several parallel or sequential reactions rather than a single rate constant. A measured activation energy may therefore summarize an experimental conversion range rather than identify one molecular event.\n\nThree time scales are particularly important: the time required to heat a particle, the time solids remain in the reactor, and the time vapors remain hot before cooling. These are not interchangeable. A solid can remain in a reactor for minutes while vapors leave in less than a second. Conversely, rapid heating of a particle does not guarantee high liquid yield if its vapors subsequently spend several seconds in a hot transfer line and crack into gases.\n\nFor lignocellulosic biomass, slow pyrolysis commonly operates at roughly 300–600 °C with relatively slow heating and extended solid residence. Fast pyrolysis for liquid production generally uses temperatures near 450–550 °C, rapid heat transfer, and hot-vapor residence times often below about two seconds. These ranges overlap and are not universal definitions. “Flash pyrolysis” usually denotes very rapid heating and short reaction times, but its numerical boundaries vary among research and industrial contexts.\n\nParticle dimensions strongly influence actual heating rates. Wood has relatively low thermal conductivity, and a large particle may retain a cool interior while its surface decomposes. Its pores carry gases and vapors outward, while pressure gradients, diffusion, and chemical reactions influence their movement. Small particles can heat more uniformly, but grinding consumes energy, generates dust, and complicates handling. Moisture also consumes heat during evaporation and can change both local temperature and vapor composition.\n\nPressure influences volatilization, gas density, residence time, and secondary reactions. Reduced pressure can assist rapid vapor removal, although vacuum equipment and vapor handling introduce additional engineering requirements. Carrier gases such as nitrogen help maintain an inert atmosphere and transport products, but dilute the product gas and may increase separation costs. Minerals in the feedstock add another control: alkali and alkaline-earth species can strongly alter biomass decomposition, promoting fragmentation and changing the balance among liquids, gases, and char. Consequently, results obtained with purified cellulose cannot be transferred directly to untreated straw or wood."
    },
    {
      "heading": "Reactor designs and process integration",
      "text": "A pyrolysis installation must accomplish several tasks simultaneously: deliver heat, exclude unwanted air, move solids and vapors through controlled temperature histories, separate entrained particles, and collect products. These requirements explain the diversity of reactor designs. A laboratory tube furnace is useful for controlled experiments, but its heat-transfer conditions and batch operation may differ substantially from those of a continuously fed industrial system.\n\nFixed-bed reactors hold the feedstock in a relatively stationary layer. They are mechanically simple and suitable for charcoal production and many experimental studies, but temperature gradients and slow internal heat transfer can be substantial. Rotary kilns tumble and convey material through a heated cylinder and can accept comparatively heterogeneous feeds. Screw or auger reactors move material mechanically, sometimes together with hot sand or another heat carrier. Their operation depends on reliable feeding, sealing, wear resistance, and control of material that softens or becomes sticky during heating.\n\nFluidized-bed reactors suspend particles in an upward-flowing gas, producing intensive mixing and high heat-transfer rates. Bubbling beds are widely studied for biomass fast pyrolysis; circulating beds transport solids between reaction and heating zones. An external combustor can burn char or another fuel to reheat circulating bed material. Such arrangements separate the oxygen-containing combustion zone from the pyrolysis zone, although pressure control and gas sealing are needed to limit crossover.\n\nOther configurations emphasize different feedstocks or products. Ablative reactors press biomass against a hot surface, allowing conversion to proceed through a thin reacting layer. Entrained-flow reactors carry fine particles or droplets in a hot gas stream. Microwave systems deposit electromagnetic energy according to the dielectric properties of the feed and any added absorber, while electrically heated reactors can decouple heat supply from on-site fuel combustion. None eliminates the need to establish the temperature actually experienced by the reacting material.\n\nDownstream equipment often determines whether a reactor’s products become useful commodities. Cyclones and filters remove char and ash from vapor streams; condensers, quench systems, and electrostatic collectors recover liquids and aerosols. Rapid cooling limits further reaction, but staged condensation may deliberately separate heavier and lighter fractions. Fouling, tar deposition, and plugging are persistent operational problems.\n\nHeat integration is equally important. Noncondensable gas may be burned to supply process heat, and recovered heat may dry incoming feedstock. Burning some char can also improve energy self-sufficiency, but reduces the amount available as a product. Accordingly, maximum liquid yield, maximum exported energy, and maximum retained solid carbon are different optimization objectives, not interchangeable descriptions of process performance."
    },
    {
      "heading": "Biomass conversion and product properties",
      "text": "Biomass pyrolysis is governed largely by the behavior of cellulose, hemicelluloses, lignin, extractives, and mineral matter. Cellulose is a relatively regular glucose polymer and can produce anhydrosugars such as levoglucosan under suitable conditions. Hemicelluloses are more chemically varied and often decompose over lower temperature ranges, producing acids, furans, gases, and char. Lignin has an irregular aromatic structure and decomposes over a broad temperature interval, contributing phenolic vapors and substantial solid residue.\n\nThe three principal collected fractions are commonly called bio-oil, char, and noncondensable gas. Under favorable fast-pyrolysis conditions, clean woody biomass can yield roughly 60–75% condensable liquid by mass relative to dry feed, although the value depends on collection methods and whether reaction water is included. Agricultural residues with greater ash contents frequently behave differently. Yield figures are meaningful only when their dry or as-received basis and the treatment of water are specified.\n\nBio-oil from conventional biomass fast pyrolysis is not equivalent to petroleum crude oil. It is usually an oxygen-rich mixture containing water, acids, sugars, carbonyl compounds, phenolics, and higher-molecular-mass material. Its heating value is commonly around 15–20 megajoules per kilogram on an as-produced basis, substantially below that of petroleum fuels. It can be corrosive, may undergo phase separation, and often becomes more viscous during storage through continuing chemical reactions. Ordinary petroleum distillation does not simply turn it into gasoline or diesel, because heating can cause further decomposition and condensation.\n\nUpgrading routes include catalytic vapor treatment and hydroprocessing of the collected liquid. Catalysis over acidic materials can favor smaller aromatic hydrocarbons but also produces gas and catalyst coke. Hydroprocessing uses hydrogen to remove oxygen, stabilize reactive molecules, and modify molecular size. It requires suitable catalysts and pressure equipment; hydrogen demand and catalyst deactivation affect both cost and environmental performance. Alternatively, selected fractions can be processed into chemicals without attempting to make a petroleum-like fuel.\n\nThe solid residue contains carbon, mineral ash, and variable amounts of hydrogen, oxygen, and other elements. When produced and used for appropriate environmental applications, it is commonly termed biochar. Its properties depend on feedstock and production conditions: increasing treatment temperature generally lowers volatile content and increases aromatic character, but does not guarantee any particular agronomic response. Pyrolysis gas typically contains carbon monoxide, carbon dioxide, methane, hydrogen, and light hydrocarbons in proportions that vary widely. Its most immediate use is often as an internal process fuel rather than a separately marketed gas."
    },
    {
      "heading": "Coal, petroleum, methane, and advanced materials",
      "text": "Coal pyrolysis is central to cokemaking. Suitable coking coals soften, pass through a plastic interval, release volatile products, and resolidify into a porous carbon-rich mass. Industrial coke ovens commonly heat coal to approximately 1,000–1,100 °C over many hours. The strength and reactivity of the coke depend on coal blend, heating conditions, and final structure. Not all coals form mechanically suitable coke, so simply heating an arbitrary coal does not reproduce metallurgical coke production.\n\nPetroleum thermal cracking applies related decomposition chemistry to liquid and gaseous hydrocarbons. Steam cracking is a particularly important example: hydrocarbon feed is mixed with steam, heated rapidly, and then quenched to preserve products such as ethylene and propylene. Furnace coil outlet temperatures are often approximately 800–875 °C, with residence times on the order of tenths of a second. Steam helps lower hydrocarbon partial pressure and influences coke formation and transport. It does not make the process identical to steam gasification; cracking remains the principal intended conversion.\n\nMethane pyrolysis is often represented by the overall reaction\n\n\\[\\mathrm{CH_4 \\rightarrow C(s) + 2H_2}.\\]\n\nThis is an endothermic route to hydrogen and solid carbon without carbon dioxide as a stoichiometric reaction product. Thermal, plasma-assisted, catalytic, and molten-media systems have been investigated. Practical challenges include delivering heat efficiently, maintaining reaction rates, separating carbon continuously, and preventing carbon deposits from blocking equipment or deactivating catalysts. The marketability of the carbon depends on its purity, morphology, and consistency.\n\nPyrolysis also creates functional carbon materials. Controlled carbonization of polymer fibers is used in the manufacture of carbon fiber, often following a stabilization stage that prevents the precursor from melting or losing its intended shape. Additional high-temperature treatment changes carbon ordering and properties. Manufacture of activated carbon may begin with carbonization, followed by physical or chemical activation to develop pore structure. Carbonization and activation are related processing stages, but they are not synonymous.\n\nSome inorganic and organoelement precursors yield ceramics rather than predominantly carbonaceous products. Polymer-derived ceramic routes use cross-linked precursors whose thermal decomposition produces materials such as silicon carbide or silicon carbonitride, accompanied by the release of volatile molecules. Spray pyrolysis similarly uses heated droplets or their vapors to form particles or films, often metal oxides. These examples illustrate the breadth of the term: pyrolysis describes a mode of chemical conversion by heat, not a single feedstock, temperature range, or product family."
    },
    {
      "heading": "Waste plastics, tires, and mixed feedstocks",
      "text": "Plastic pyrolysis seeks to convert discarded polymers into gases, liquids, waxes, monomers, or carbon-rich residues. Performance depends strongly on polymer identity. Polyethylene and polypropylene commonly produce broad hydrocarbon distributions through chain scission and secondary reactions. At moderate cracking severity, substantial wax fractions can remain; higher temperatures and longer vapor residence tend to increase gas production. Polystyrene can yield a relatively styrene-rich liquid, whereas polymers containing oxygen, nitrogen, or chlorine generate different products and impurities.\n\nPolyvinyl chloride presents a distinct challenge because heating releases hydrogen chloride during dehydrochlorination and leaves a reactive, increasingly unsaturated residue. Chlorine may also persist in organic products or contaminate other streams. Polyethylene terephthalate produces oxygenated compounds, including aromatic acids and their derivatives, rather than a simple petroleum-like oil. Mixed waste therefore cannot be represented reliably by experimental results obtained from clean, single-polymer feedstocks.\n\nSorting, shredding, drying, and removal of metals or mineral contamination can be as important as the reactor itself. Real waste may contain food residues, paper, pigments, fillers, adhesives, flame retardants, and multilayer packaging. Such constituents affect corrosion, residue production, catalyst performance, and product specifications. Even predominantly polyolefin-derived oils may require further treatment to control halogens, nitrogen, metals, unstable compounds, and unsuitable boiling-range components before use in petrochemical equipment.\n\nWaste tires yield oil, gas, steel, and a carbon-rich solid. That solid includes mineral additives and other constituents and is not automatically equivalent to newly manufactured carbon black. Its use as a reinforcing filler can require processing and qualification. Tire-derived oils may contain substantial aromatic and sulfur-bearing components, making their destination and treatment important parts of process assessment. Similar product-quality issues arise when pyrolyzing sewage sludge or other wastes with high ash and contaminant contents.\n\nThe description “chemical recycling” does not by itself establish a material outcome. If a pyrolysis product becomes new polymer feedstock, some material is returned to chemical manufacture. If it is burned as fuel, the operation principally recovers energy from that fraction. Mechanical recycling, by contrast, reprocesses suitable plastics without deliberately decomposing their polymer chains. Comparisons must account for waste quality, pretreatment, product yields, upgrading requirements, and displaced products. Reported gross liquid yields alone do not show how much virgin polymer production is actually replaced."
    },
    {
      "heading": "Experimental characterization and modeling",
      "text": "Thermogravimetric analysis measures sample mass as a function of temperature or time under a controlled atmosphere. Its derivative curve helps identify temperature intervals with rapid mass loss. It is widely used to compare feedstocks and estimate decomposition kinetics, but mass loss is not a direct measurement of useful oil production. Water evaporation, gas release, vapor formation, and overlapping reactions can contribute to the same signal.\n\nThermal measurements are often combined with calorimetry to detect heat effects and with evolved-gas analysis to identify products. Infrared spectroscopy can follow selected gaseous functional groups, while mass spectrometry provides information about volatile species and fragments. Pyrolysis coupled to gas chromatography and mass spectrometry separates and identifies many decomposition products. Such methods are valuable for identifying polymers, studying biomass chemistry, and characterizing organic material in geological or cultural samples.\n\nEach technique has limitations. Chromatographic methods may underrepresent nonvolatile, thermally unstable, or very high-molecular-mass components. Instrument response differs among compounds, so a peak-area percentage is not necessarily a mass percentage. Char particles entrained in an oil can distort measurements, and water requires separate consideration. Gas volumes must be related to stated temperature and pressure conditions. Reliable experiments also require leak control, representative sampling, instrument calibration, and explicit treatment of measurement uncertainty.\n\nMaterial balances provide a basic test of experimental completeness:\n\n\\[m_{\\mathrm{feed}} = m_{\\mathrm{solid}} + m_{\\mathrm{condensate}} + m_{\\mathrm{gas}} + m_{\\mathrm{unrecovered}}.\\]\n\nThis simplified form assumes that added carrier gas and other external material inputs are accounted for separately. Elemental balances for carbon, hydrogen, oxygen, nitrogen, sulfur, and halogens can reveal losses or misclassification that a gross mass balance conceals. In biomass experiments, reporting both dry-feed yields and water content helps distinguish organic-liquid production from the collection of moisture and reaction water.\n\nModels range from empirical yield correlations to detailed reaction mechanisms. Global kinetic models may divide biomass into pseudo-components or represent conversion through competing gas-, liquid-, and char-forming reactions. More detailed models incorporate particle heating, internal transport, and secondary vapor chemistry. Computational fluid dynamics adds reactor-scale flow, mixing, and heat transfer. Parameters fitted to small samples under slow heating may not predict a large reactor where transport limits dominate. Validation therefore requires comparisons across heating rates, particle sizes, and operating conditions, rather than agreement with a single conversion curve."
    },
    {
      "heading": "Environmental performance, carbon accounting, and safety",
      "text": "Pyrolysis does not have a single environmental footprint. Its effects depend on the feedstock’s origin, the energy source, process efficiency, emissions controls, product use, and the alternative fate of the material. Converting a clean residue that would otherwise decay, processing fossil-derived plastic, and carbonizing purpose-grown biomass involve different carbon flows. Life-cycle assessment is used to compare such systems, but conclusions depend on consistent boundaries, allocation among co-products, and realistic assumptions about displaced energy and materials.\n\nFor biomass-derived char, possible carbon storage arises because part of the original organic carbon becomes more resistant to biological decomposition. Persistence is not absolute or uniform: a char contains components with different reactivities, and behavior depends on production conditions and the receiving environment. Climate accounting must consider the fraction of carbon retained over the stated time horizon, emissions from production and transport, and what would have happened to the biomass otherwise. Effects on the carbon cycle cannot be inferred from char mass alone.\n\nMethane pyrolysis illustrates a related boundary problem. Although its ideal reaction produces no carbon dioxide, a complete assessment includes upstream methane leakage, heat and electricity supply, equipment and material inputs, and the eventual fate of the solid carbon. If that carbon is later oxidized, its carbon returns to the atmosphere. Likewise, converting plastic into fuel does not eliminate fossil carbon emissions when the fuel is burned. Avoided landfill disposal and avoided virgin-material production are separate claims requiring separate evidence.\n\nPotential emissions include carbon monoxide, volatile organic compounds, particulate matter, acidic gases, and contaminated condensates. Tars and some char or oil fractions may contain polycyclic aromatic hydrocarbons. Metals can become concentrated in solid residues, while halogens and sulfur partition among gas, liquid, and solid streams. The absence of oxygen in the reactor does not guarantee clean exhaust from the whole installation, because product gases may later be combusted and unwanted air may enter during operation.\n\nOperational hazards arise from high temperatures, combustible gases, toxic carbon monoxide, hot solids, and air ingress. An oxygen-deficient process stream may pass through a flammable composition if it mixes with air. Fresh char can retain heat and, under some conditions, undergo self-heating after exposure to oxygen. Industrial designs therefore incorporate controlled cooling, gas monitoring, pressure management, and systems for treating off-gases and contaminated liquids. These controls are integral to the technology rather than optional additions to an otherwise emission-free process."
    }
  ],
  "links": [
    "chemical-bond",
    "combustion",
    "temperature",
    "charcoal",
    "coke",
    "chemical-reaction",
    "distillation",
    "radical-chemistry",
    "carbon-dioxide",
    "oxygen",
    "heat",
    "enthalpy",
    "chemical-equilibrium",
    "activation-energy",
    "gas-constant",
    "thermal-conductivity",
    "diffusion",
    "pressure",
    "cellulose",
    "lignin",
    "catalysis",
    "hydrogen",
    "methane",
    "carbon",
    "activated-carbon",
    "thermogravimetric-analysis",
    "calorimetry",
    "infrared-spectroscopy",
    "mass-spectrometry",
    "chromatography",
    "calibration",
    "measurement-uncertainty",
    "life-cycle-assessment",
    "carbon-cycle"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}