{
  "id": "potential-barrier",
  "title": "Potential Barrier",
  "lang": "en",
  "source_lang": "en",
  "summary": "A potential barrier is a region of elevated potential energy that restricts motion or transitions, with crossing governed by energy, thermal fluctuations, or quantum tunneling.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Energy barrier"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/potential-barrier/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/potential-barrier/",
      "json": "https://aiwiki.page/zh/potential-barrier.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A potential barrier is a region of a system’s potential energy landscape that must be crossed to move between configurations or spatial regions. In classical mechanics, a particle cannot pass through a barrier if its available energy is below the potential energy encountered along every accessible route. In quantum mechanics, a particle can have a nonzero probability of transmission through a finite barrier even when its energy is below the barrier height, a phenomenon called quantum tunneling. Related energy and free-energy barriers govern chemical reactions, transport through materials, and transitions between metastable states."
    },
    {
      "heading": "Definition and physical meaning",
      "text": "For a particle moving in one dimension, a barrier is described by a potential-energy function \\(V(x)\\) that rises above its value in an adjoining region. Two important characteristics are:\n\n- Barrier height: the difference between the maximum potential energy along a route and a specified reference energy, often the potential energy of the initial state.\n- Barrier width: the spatial extent of the elevated-potential region. For tunneling, the relevant width is the region in which \\(V(x)>E\\), where \\(E\\) is the particle’s total energy.\n\nBarrier height must therefore be quoted relative to a reference. A barrier may be high relative to the bottom of an initial well but only slightly above the energy of a particle already excited within that well.\n\nA potential barrier is not necessarily a material wall. It may arise from electrical interactions, molecular forces, or an effective description of more complicated motion. For an electric charge \\(q\\) in an electric potential \\(\\phi(x)\\), the electrical potential energy is\n\n\\[V(x)=q\\phi(x).\\]\n\nConsequently, a region of higher electric potential is a potential-energy barrier for a positive charge but not necessarily for a negative charge.\n\nOnly differences in potential energy affect the dynamics. Adding the same constant to both \\(V(x)\\) and \\(E\\) does not change whether a region is accessible."
    },
    {
      "heading": "Classical motion",
      "text": "For a particle of constant mass \\(m\\) moving in a time-independent one-dimensional potential,\n\n\\[E=\\frac{p^2}{2m}+V(x),\\]\n\nwhere \\(p\\) is its momentum. Because the kinetic energy \\(p^2/(2m)\\) cannot be negative, classical motion is restricted to regions where\n\n\\[E\\geq V(x).\\]\n\nIf a particle approaches a smooth barrier with energy below its maximum, it reaches a turning point, where \\(E=V(x)\\), and reverses direction. If its energy exceeds the maximum, it can pass over the barrier.\n\nThe associated force is\n\n\\[F(x)=-\\frac{dV}{dx}.\\]\n\nAn approaching particle therefore slows while climbing a potential barrier and accelerates while descending the other side. For conservative motion, its total energy remains constant throughout.\n\nIn more than one dimension, the existence of a barrier depends on the available paths. A particle may be unable to cross a high ridge directly but able to travel around it through a lower passage. The relevant threshold is associated with the lowest accessible route between the initial and final regions, not necessarily the highest point on an arbitrarily chosen line.\n\nThese statements assume an isolated particle in a conservative, time-independent potential. Collisions, external driving, or coupling to an environment can change its energy and enable crossing."
    },
    {
      "heading": "Quantum-mechanical description",
      "text": "In nonrelativistic quantum mechanics, the stationary wave function satisfies the time-independent Schrödinger equation:\n\n\\[-\\frac{\\hbar^2}{2m}\\frac{d^2\\psi}{dx^2}+V(x)\\psi=E\\psi,\\]\n\nwhere \\(\\hbar=h/(2\\pi)\\) and \\(h\\) is the Planck constant.\n\nIn a region of constant potential with \\(E>V\\), solutions are oscillatory. Where \\(E<V\\), the corresponding solutions are exponential rather than oscillatory. A wave function generally penetrates such a classically forbidden region instead of becoming zero at its boundary.\n\nFor a finite barrier separating two accessible regions, this penetration can produce a transmitted wave beyond the barrier. In a lossless, one-dimensional scattering problem, the reflection and transmission probabilities satisfy\n\n\\[R+T=1.\\]\n\nThey are defined by ratios of probability currents, rather than by wave-function amplitudes alone. This distinction matters when the potentials, and therefore particle velocities, differ on the two sides.\n\nTunneling does not require a particle to acquire additional energy temporarily. In a stationary, time-independent scattering problem, the transmitted particle has the same total energy as the incident particle. Classical trajectory language simply does not describe the quantum state inside the barrier.\n\nRectangular barrier\n\nAn idealized barrier of height \\(V_0>0\\) and width \\(a\\) is\n\n\\[V(x)= \\begin{cases} 0, & x<0,\\\\ V_0, & 0\\leq x\\leq a,\\\\ 0, & x>a. \\end{cases}\\]\n\nFor \\(0<E<V_0\\), the exact transmission coefficient is\n\n\\[T= \\left[ 1+ \\frac{V_0^2\\sinh^2(\\kappa a)} {4E(V_0-E)} \\right]^{-1}, \\qquad \\kappa=\\frac{\\sqrt{2m(V_0-E)}}{\\hbar}.\\]\n\nFor an opaque barrier, \\(\\kappa a\\gg1\\), this becomes approximately\n\n\\[T\\approx \\frac{16E(V_0-E)}{V_0^2} e^{-2\\kappa a}.\\]\n\nThe exponential dependence makes transmission highly sensitive to barrier width, particle mass, and the energy difference \\(V_0-E\\).\n\nQuantum reflection can also occur when \\(E>V_0\\). For the rectangular barrier,\n\n\\[T= \\left[ 1+ \\frac{V_0^2\\sin^2(qa)} {4E(E-V_0)} \\right]^{-1}, \\qquad q=\\frac{\\sqrt{2m(E-V_0)}}{\\hbar}.\\]\n\nThus, having enough energy to cross classically does not guarantee complete quantum transmission. At particular energies, interference between waves reflected at the two interfaces produces perfect transmission in this idealized model.\n\nSmooth barriers and semiclassical approximation\n\nFor a sufficiently smooth barrier with turning points \\(x_1\\) and \\(x_2\\), the leading exponential dependence of the tunneling probability is given by the Wentzel–Kramers–Brillouin approximation:\n\n\\[T\\sim \\exp\\left[ -\\frac{2}{\\hbar} \\int_{x_1}^{x_2} \\sqrt{2m\\bigl(V(x)-E\\bigr)}\\,dx \\right].\\]\n\nThe integral shows that barrier shape matters, not merely its maximum height. Two barriers of equal height can have very different transmission probabilities if their widths or profiles differ.\n\nThis expression omits prefactors, and the basic semiclassical solution requires special treatment near turning points. It is most useful for estimating strongly suppressed transmission through smooth barriers; it is not a universal replacement for solving the Schrödinger equation."
    },
    {
      "heading": "Thermal activation and free-energy barriers",
      "text": "A system in contact with an environment can gain and lose energy through thermal fluctuations. Even when its typical energy is below a barrier, occasional fluctuations may permit thermally activated crossing.\n\nA common approximate rate expression is\n\n\\[k=A\\exp\\left(-\\frac{E_a}{k_{\\mathrm B}T}\\right),\\]\n\nwhere \\(E_a\\) is an activation-energy scale per event, \\(k_{\\mathrm B}\\) is the Boltzmann constant, \\(T\\) is absolute temperature, and \\(A\\) is a prefactor. When activation energy is expressed per mole, the denominator is \\(RT\\), with \\(R\\) the gas constant.\n\nThis exponential form is central to chemical kinetics, but measured activation energies need not equal a single microscopic potential-energy barrier. Rates can also depend on molecular configurations, interactions with the surroundings, and temperature-dependent prefactors.\n\nFor systems with many degrees of freedom, a free-energy barrier is often more informative than a bare potential-energy barrier. Free energy incorporates both energetic and entropic contributions from configurations not explicitly represented by the chosen reaction coordinate. Depending on the constraints, the relevant quantity may be Gibbs free energy or Helmholtz free energy.\n\nA high free-energy barrier can therefore arise because transition configurations are energetically unfavorable, statistically rare, or both. In transition-state theory, a commonly used expression is\n\n\\[k\\approx \\chi\\frac{k_{\\mathrm B}T}{h} \\exp\\left(-\\frac{\\Delta G^\\ddagger}{RT}\\right),\\]\n\nwhere \\(\\Delta G^\\ddagger\\) is the molar free energy of activation and \\(\\chi\\) is a transmission correction accounting for effects such as recrossing of the dividing surface.\n\nThermal activation and tunneling are distinct mechanisms, but both can contribute to the same process. Thermally assisted tunneling occurs when excitation raises a system to an energy from which the remaining barrier is easier to tunnel through."
    },
    {
      "heading": "Major physical applications",
      "text": "Nuclear processes\n\nIn alpha decay, an alpha particle escapes from an atomic nucleus by tunneling through a barrier formed by the combined nuclear and electrostatic interactions. The strong dependence of transmission on particle energy helps explain the wide range of alpha-decay lifetimes. Quantitative tunneling accounts of alpha decay in 1928 were important early successes of quantum mechanics.\n\nIn nuclear fusion, positively charged nuclei repel one another at long range. This Coulomb barrier hinders their approach to distances at which the attractive nuclear interaction becomes important. Tunneling allows fusion at collision energies below the classical barrier height and is essential to understanding stellar reaction rates.\n\nElectronic materials and devices\n\nIn a semiconductor, spatial variation of electronic energy bands can create barriers for charge carriers. Examples include junctions between differently doped regions, metal–semiconductor contacts, and interfaces between different semiconductor materials. Carrier transport may involve thermal passage over a barrier, tunneling through it, or a combination of mechanisms.\n\nSuch barriers must be distinguished from a material’s band gap. A band gap is an energy interval without allowed bulk electronic states, whereas a spatial barrier describes how the energy landscape changes with position.\n\nElectron tunneling across very narrow gaps underlies scanning tunneling microscopy. Its strong dependence on gap width makes the tunneling current sensitive to atomic-scale changes in surface position.\n\nIn superconducting junctions, a thin insulating barrier can permit coherent transfer of Cooper pairs, producing the Josephson effect.\n\nChemical reactions and structural transitions\n\nA chemical reaction can be represented as motion across a potential-energy surface whose coordinates describe atomic positions. Reactant and product regions are often separated by a saddle point. The lowest-energy connecting route provides a useful model of the reaction pathway, though real dynamics can involve multiple pathways and substantial environmental effects.\n\nCatalysis increases reaction rates by providing alternative mechanisms with different barriers. It does not change the overall free-energy difference between fixed reactant and product states.\n\nBarriers also govern diffusion between sites in solids, molecular conformational changes, and nucleation during a phase transition. In nucleation, the barrier is typically a free-energy cost associated with forming an interface before the bulk benefit of the new phase becomes dominant."
    },
    {
      "heading": "Interpretation and limitations",
      "text": "A barrier is a feature of a specified model and set of coordinates. Reducing a multidimensional system to one coordinate can hide alternative pathways, slow environmental rearrangements, or repeated crossings. Two systems with the same apparent barrier height may therefore have different transition rates.\n\nA barrier primarily concerns kinetic accessibility, not thermodynamic preference. A metastable state can persist for a long time because escape is slow even when a lower-free-energy state exists elsewhere.\n\nSeveral distinctions are important:\n\n- Height alone is insufficient. Width and shape strongly affect tunneling; friction, entropy, and dynamical prefactors affect thermal crossing.\n- Transmission is not instantaneous passage. A transmission probability does not by itself define a unique tunneling time.\n- Infinite barriers are idealizations. They impose exact exclusion in a model, unlike finite barriers that allow penetration.\n- One-particle models have restricted scope. Collective motion, interactions, environmental coupling, and relativistic effects may require more elaborate descriptions than a scalar potential in a one-dimensional Schrödinger equation."
    }
  ],
  "links": [
    "potential-energy",
    "classical-mechanics",
    "quantum-mechanics",
    "quantum-tunneling",
    "electric-charge",
    "electric-potential",
    "mass",
    "momentum",
    "kinetic-energy",
    "force",
    "wave-function",
    "schrodinger-equation",
    "planck-constant",
    "scattering",
    "interference",
    "boltzmann-constant",
    "temperature",
    "gas-constant",
    "chemical-kinetics",
    "activation-energy",
    "entropy",
    "gibbs-free-energy",
    "alpha-decay",
    "nuclear-fusion",
    "semiconductor",
    "band-gap",
    "josephson-effect",
    "chemical-reaction",
    "catalysis",
    "phase-transition"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}