{
  "id": "polarizer",
  "title": "Polarizer",
  "lang": "en",
  "source_lang": "en",
  "summary": "A polarizer is an optical device that selectively transmits or separates light according to its polarization, enabling control and analysis of electromagnetic waves.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Polarizing filter",
    "Polarising filter",
    "Polariser"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/polarizer/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/polarizer/",
      "json": "https://aiwiki.page/zh/polarizer.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "A polarizer is a device that selectively transmits, absorbs, reflects, or redirects light according to its polarization. It can produce a beam with a well-defined polarization from unpolarized or partially polarized light, or separate an incident beam into components with different polarizations. Polarizers are fundamental components in optics, used in imaging, displays, scientific instruments, and laser systems. Related devices operate at other wavelengths of electromagnetic radiation, including microwaves and infrared radiation."
    },
    {
      "heading": "Physical principle",
      "text": "Polarization describes the behavior of the electric field of an electromagnetic wave. For a plane wave traveling through a uniform, isotropic medium, the electric field oscillates perpendicular to the direction of propagation. In linearly polarized light, its direction of oscillation is fixed; in circularly or elliptically polarized light, the field vector rotates as the wave propagates. Unpolarized light has no persistent preferred polarization, when averaged over the measurement interval.\n\nAn ideal linear polarizer transmits the electric-field component parallel to its transmission axis and rejects the perpendicular component. Rejection need not mean absorption: a polarizing beam splitter directs the two components into separate output beams.\n\nA polarizer is distinct from a wave plate, or retarder. An ideal wave plate changes the relative phase of two orthogonal polarization components without selectively attenuating them. It can therefore transform an already polarized beam from one polarization state to another, but cannot by itself turn unpolarized light into fully polarized light.\n\nMalus’s law\n\nWhen linearly polarized light passes through an ideal linear polarizer, the transmitted intensity follows Malus’s law:\n\n\\[I=I_0\\cos^2\\theta,\\]\n\nwhere \\(I_0\\) is the incident intensity and \\(\\theta\\) is the angle between the incident polarization direction and the transmission axis. The relationship follows because the transmitted electric-field amplitude is the projection of the incident field onto that axis, while intensity is proportional to the squared field amplitude.\n\nAn ideal linear polarizer transmits half the intensity of unpolarized incident light:\n\n\\[I=\\frac{I_{\\mathrm{in}}}{2}.\\]\n\nTwo ideal linear polarizers with perpendicular transmission axes are crossed polarizers and transmit no light. Real devices transmit a small residual amount because their rejection is imperfect and because other components may scatter or alter the polarization.\n\nIn polarization measurements, the first polarizer often prepares the incident state, while a second, called an analyzer, tests the state after interaction with a sample. These names describe their roles rather than necessarily different constructions."
    },
    {
      "heading": "Main types",
      "text": "Absorptive polarizers\n\nAbsorptive polarizers preferentially absorb one polarization component. A common sheet polarizer contains a stretched polymer film whose aligned molecular structures absorb electric-field oscillations more strongly in one direction than in the perpendicular direction. Iodine-treated polyvinyl alcohol is widely used for this purpose.\n\nThese films are inexpensive, thin, and suitable for large areas. They appear in sunglasses, photographic filters, and displays. Their limitations include finite transmission, wavelength-dependent color, and sensitivity to heat and environmental exposure. Since rejected light becomes heat, absorption can limit their use with high-power beams.\n\nThe transmission axis need not coincide with the physical alignment direction of the absorbing structures: in common dichroic films, light polarized along the strongly absorbing direction is suppressed.\n\nBirefringent prism polarizers\n\nBirefringence occurs when a material has different refractive indices for different polarization modes. Suitably cut crystals can therefore separate an incident beam into orthogonally polarized components.\n\nIn a Nicol prism, introduced by William Nicol in 1828, a calcite crystal is cut and cemented so that one component undergoes total internal reflection at the internal interface while the other is transmitted. Later designs, including Glan-type prisms, use other arrangements of crystal sections and interfaces.\n\nSome birefringent devices provide two useful output beams rather than rejecting one. A Wollaston prism, for example, separates the orthogonally polarized components into diverging beams.\n\nCrystal polarizers can provide high polarization purity, but their usable wavelength range, angular acceptance, aperture, and power handling depend on their materials and construction.\n\nThin-film polarizers and beam splitters\n\nThin-film polarizers use multilayer dielectric coatings whose optical response differs for two orthogonal polarizations. Interference between reflections from the layers is engineered to favor transmission of one component and reflection of the other.\n\nA common polarizing beam-splitter cube consists of two prisms joined along a coated diagonal surface. It typically transmits the component polarized parallel to the plane of incidence, called p polarization, and reflects the perpendicular component, called s polarization.\n\nThese devices are widely used to route beams in laser systems and interferometry. Their performance depends on wavelength and incidence angle; the transmitted and reflected outputs may have different polarization purities.\n\nReflection polarizers\n\nReflection from a dielectric surface generally treats s and p polarization differently. At Brewster’s angle, an ideal interface between transparent, nonmagnetic dielectric media has zero reflected p-polarized intensity. For light incident from a medium of refractive index \\(n_1\\) into one of index \\(n_2\\),\n\n\\[\\tan\\theta_B=\\frac{n_2}{n_1}.\\]\n\nThe reflected beam is therefore s-polarized. A stack of tilted transparent plates can progressively enrich the transmitted beam in p polarization.\n\nThis mechanism also explains why glare reflected from water, glass, and other nonmetallic surfaces is often partially polarized, although ordinary scenes include many reflection angles and additional sources of light.\n\nWire-grid polarizers\n\nA wire-grid polarizer consists of closely spaced, parallel conducting lines. In a suitable wavelength regime, the electric-field component parallel to the wires drives electric currents and is largely reflected or absorbed, while the perpendicular component is preferentially transmitted.\n\nThe grid spacing must be sufficiently small relative to the wavelength for the intended behavior. Wire-grid polarizers have long been used at microwave and infrared wavelengths; nanofabrication also permits visible-light versions. Their transmission axis is perpendicular to the wires."
    },
    {
      "heading": "Circular polarizers",
      "text": "The term circular polarizer has two related uses.\n\nIn photography, it usually means a linear polarizer followed, in the direction of incoming scene light, by a quarter-wave plate. The linear element suppresses selected polarized reflections. The retarder then converts the transmitted linear polarization into approximately circular polarization, reducing incompatibilities with polarization-sensitive camera optics and metering systems. Circular polarization requires the appropriate orientation of the retarder, generally \\(45^\\circ\\) between its principal axes and the linear polarization direction.\n\nMore generally, a circular-polarization analyzer selects one circular handedness over the other. A quarter-wave plate followed by a linear polarizer can perform this function at its design wavelength. Thus, the order and orientation of the components determine whether an assembly prepares circular polarization or analyzes it.\n\nA simple retarder has wavelength-dependent retardance, so a device designed for one wavelength does not necessarily produce or analyze perfectly circular polarization across a broad spectrum."
    },
    {
      "heading": "Performance and limitations",
      "text": "Several specifications characterize a polarizer:\n\n- Pass transmission: the fraction of light in the intended polarization state that reaches the selected output.\n- Extinction ratio: commonly the ratio of transmitted power for the pass polarization to that for the rejected polarization, under otherwise identical conditions.\n- Spectral range: the wavelengths over which transmission, rejection, and polarization quality meet specified requirements.\n- Angular acceptance: the range of incidence angles over which the device performs adequately.\n- Wavefront quality: the distortion introduced into the transmitted or reflected beam.\n- Power handling: resistance to heating, optical damage, and degradation.\n\nExtinction ratio is not the same as overall light transmission. A device may reject the unwanted component very effectively while also losing a substantial fraction of the desired component. Manufacturer definitions and measurement arrangements must be distinguished when comparing specifications.\n\nFor a linear polarizer with principal-axis intensity transmissions \\(T_{\\parallel}\\) and \\(T_{\\perp}\\), unpolarized input produces transmitted intensity\n\n\\[I_{\\mathrm{out}} =\\frac{I_{\\mathrm{in}}}{2} \\left(T_{\\parallel}+T_{\\perp}\\right).\\]\n\nIf the device introduces no additional depolarization, the degree of linear polarization of that output is\n\n\\[P_{\\mathrm{L}} =\\frac{\\left|T_{\\parallel}-T_{\\perp}\\right|} {T_{\\parallel}+T_{\\perp}}.\\]\n\nPolarization purity can also be degraded by scattering, stress-induced birefringence, contamination, or downstream optical elements. In precision instruments, performance must therefore be assessed for the complete optical path rather than for the polarizer alone."
    },
    {
      "heading": "Applications",
      "text": "Photography and viewing. Polarizing filters reduce selected reflections from nonmetallic surfaces and can change the contrast of a partially polarized sky. They do not remove all reflections: the effect depends on viewing geometry, material, and the polarization of the incident light. Polarizing sunglasses use the same selective-transmission principle to suppress much horizontally polarized glare.\n\nDisplays. Many liquid-crystal displays place a liquid-crystal layer between polarizers. Electrically controlled changes in the layer’s optical properties alter the polarization reaching the analyzer, converting electrical signals into variations in transmitted intensity.\n\nMicroscopy and materials analysis. In a polarizing microscope, crossed polarizers make birefringent structures visible against a dark background. Minerals, crystals, polymers, and stressed transparent materials can change the polarization of incident light and thereby transmit light through the analyzer.\n\nScientific measurement. Polarizers are central to polarimetry and polarization-sensitive spectroscopy. They help measure optical activity, anisotropy, reflection properties, and changes in polarization caused by a sample.\n\nLaser and quantum optics. Polarizers select or separate polarization modes, suppress unwanted light, and provide adjustable attenuation when combined with wave plates. In experiments involving individual photons, polarizers and polarizing beam splitters prepare or measure polarization states, with detection probabilities described by quantum mechanics."
    }
  ],
  "links": [
    "light",
    "polarization",
    "optics",
    "electromagnetic-radiation",
    "electric-field",
    "malus-law",
    "heat",
    "birefringence",
    "refractive-index",
    "total-internal-reflection",
    "interference",
    "interferometry",
    "brewster-angle",
    "electric-current",
    "scattering",
    "microscope",
    "spectroscopy",
    "photon",
    "quantum-mechanics"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}