{
  "id": "per-mille",
  "title": "Per mille",
  "lang": "en",
  "source_lang": "en",
  "summary": "Per mille expresses a quantity in parts per thousand, using the symbol ‰; one per mille equals 0.001, or 0.1 percent.",
  "category": "mathematics",
  "subcategory": "algebra",
  "type": "concept",
  "aliases": [
    "Per mill",
    "Per mil",
    "Parts per thousand"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/per-mille/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/per-mille/",
      "json": "https://aiwiki.page/zh/per-mille.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Per mille is a way of expressing a ratio or fraction in parts per thousand, written with the symbol ‰. One per mille is one thousandth of a whole:\n\n\\[1\\,‰=\\frac{1}{1000}=0.001=0.1\\%.\\]\n\nThe name comes from Latin per mille, meaning “for every thousand.” Like percentage, per mille is a scaled notation for a number rather than a physical unit. It is used for population rates, gradients, composition measurements, and relative differences."
    },
    {
      "heading": "Mathematical meaning and conversion",
      "text": "For any numerical value \\(p\\),\n\n\\[p\\,‰=\\frac{p}{1000}.\\]\n\nThus, \\(8\\,‰\\) means \\(8/1000\\), or \\(0.008\\), while \\(1000\\,‰\\) equals one whole. Conversely, a ratio \\(r\\) is expressed in per mille by multiplying its numerical value by 1,000:\n\n\\[r=(1000r)\\,‰.\\]\n\nCommon conversions include:\n\nPer mille | Decimal fraction | Percentage\n\\(1\\,‰\\) | 0.001 | \\(0.1\\%\\)\n\\(5\\,‰\\) | 0.005 | \\(0.5\\%\\)\n\\(10\\,‰\\) | 0.01 | \\(1\\%\\)\n\\(25\\,‰\\) | 0.025 | \\(2.5\\%\\)\n\\(100\\,‰\\) | 0.1 | \\(10\\%\\)\n\\(1000\\,‰\\) | 1 | \\(100\\%\\)\n\nTo calculate \\(p\\,‰\\) of a quantity \\(Q\\), the quantity is multiplied by \\(p/1000\\). For example, \\(12\\,‰\\) of 50,000 is\n\n\\[50{,}000\\times\\frac{12}{1000}=600.\\]\n\nValues expressed in per mille need not be whole numbers. They may also exceed \\(1000\\,‰\\) when the underlying ratio exceeds one, or be negative when they describe a signed change or deviation. A proportion of a whole, however, normally lies between \\(0\\,‰\\) and \\(1000\\,‰\\)."
    },
    {
      "heading": "Relation to other scaled ratios",
      "text": "Per mille belongs to a family of notations that express ratios using different denominators:\n\n- Percent, symbol %, means parts per hundred.\n- Per mille, symbol ‰, means parts per thousand.\n- Basis point means one hundredth of a percentage point, or one part in ten thousand.\n- Parts per million, usually abbreviated ppm, means parts per million.\n\nTheir numerical relationship is\n\n\\[1\\,‰=0.1\\%=10\\text{ basis points}=1000\\text{ ppm}.\\]\n\nThese conversions apply when the expressions refer to the same underlying ratio. A mass ratio and a volume ratio, for example, cannot generally be equated merely by converting their numerical notation.\n\nAn absolute difference between two per-mille values must also be distinguished from a relative percentage change. A rise from \\(4\\,‰\\) to \\(6\\,‰\\) is an increase of 2 parts per thousand, equivalent to 0.2 percentage points. Relative to the initial value, however, the increase is\n\n\\[\\frac{6-4}{4}\\times100\\%=50\\%.\\]"
    },
    {
      "heading": "Applications",
      "text": "Population and statistical rates\n\nIn statistics and demography, rates are often reported per 1,000 people. For example, a crude annual birth rate of \\(12\\,‰\\) represents 12 live births during a year per 1,000 people in the population used as the denominator.\n\nSuch a rate is not necessarily a probability. Its interpretation depends on the event counted, the population denominator, and the observation period. A number reported “per thousand” is therefore incomplete unless these are clear.\n\nGradients\n\nIn railway engineering, longitudinal gradients are commonly expressed in per mille:\n\n\\[\\text{gradient} = \\frac{\\text{vertical rise}}{\\text{horizontal distance}} \\times1000\\,‰.\\]\n\nA gradient of \\(20\\,‰\\) means a rise of 20 metres for every 1,000 metres of horizontal distance, equivalent to a 2% grade. It does not mean an angle of 20 degrees.\n\nIf the inclination angle is \\(\\theta\\), then a gradient of \\(g\\,‰\\) corresponds to\n\n\\[\\tan\\theta=\\frac{g}{1000}.\\]\n\nThe distinction between horizontal distance and distance along the slope matters in precise calculations, although the difference is small for gentle slopes.\n\nComposition and salinity\n\nPer mille can express a component’s share of a mixture. A mass fraction of \\(3\\,‰\\), for example, is equivalent to 3 grams of a component per kilogram of mixture. The denominator is the mass of the entire mixture, not merely the remaining material.\n\nHistorically, seawater salinity was often reported in parts per thousand. Modern oceanography distinguishes practical salinity, which is dimensionless and defined through conductivity measurements, from absolute salinity, commonly expressed in grams per kilogram. A practical-salinity value should therefore not automatically be interpreted as an exact mass fraction in per mille.\n\nIsotope ratios\n\nIn isotope geochemistry, per mille commonly expresses the relative difference between an isotope ratio in a sample and that in a reference material. The conventional delta notation is\n\n\\[\\delta=\\frac{R_{\\mathrm{sample}}}{R_{\\mathrm{reference}}}-1,\\]\n\nwhere \\(R\\) is the specified isotope abundance ratio. The resulting dimensionless value is usually reported in per mille.\n\nFor example, \\(\\delta=+5\\,‰\\) means that the sample’s isotope ratio is 0.5% greater than the reference ratio. It does not mean that the isotope constitutes five parts per thousand of the sample."
    },
    {
      "heading": "Notation and interpretation",
      "text": "The per-mille symbol, ‰, resembles the percent sign with an additional small circle. In Unicode it is encoded as U+2030 PER MILLE SIGN. It is distinct from ‱, the per-ten-thousand sign.\n\nThe abbreviation ppt is sometimes used for “parts per thousand,” but it can also mean “parts per trillion.” Writing “parts per thousand” in full, or using ‰ with a clearly defined ratio, avoids that ambiguity.\n\nPer-mille notation specifies a scale, not the nature of the quantity. Its interpretation still requires a defined numerator and denominator: counts, masses, volumes, lengths, or a relative deviation from a reference."
    }
  ],
  "links": [
    "fraction",
    "latin",
    "percentage",
    "basis-point",
    "statistics",
    "probability",
    "railway",
    "isotope"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}