{
  "id": "penman-monteith-equation",
  "title": "Penman–Monteith Equation",
  "lang": "en",
  "source_lang": "en",
  "summary": "The Penman–Monteith equation estimates evapotranspiration by combining surface energy availability, atmospheric transport, and resistance to water-vapour loss.",
  "category": "geography",
  "subcategory": "",
  "type": "concept",
  "aliases": [
    "Penman–Monteith combination equation",
    "Penman–Monteith model"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/penman-monteith-equation/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/penman-monteith-equation/",
      "json": "https://aiwiki.page/zh/penman-monteith-equation.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The Penman–Monteith equation is a physically based equation for estimating evapotranspiration, the combined transfer of water to the atmosphere through evaporation from surfaces and transpiration by plants. It brings together the energy available to vaporize water, the atmosphere’s capacity to transport water vapour, and the resistance imposed by vegetation and other surfaces. The equation is widely used in hydrology, meteorology, agricultural water management, and land-surface modelling. Its standardized application to a hypothetical, well-watered grass surface is a principal method for calculating reference evapotranspiration."
    },
    {
      "heading": "Physical basis",
      "text": "Evapotranspiration involves two linked processes: supplying energy to convert liquid water into vapour and transporting that vapour away from the evaporating surface. Neither energy availability nor atmospheric dryness alone is sufficient to determine the rate.\n\nThe surface energy balance can be written, in a simplified form, as\n\n\\[R_n-G=H+\\lambda E,\\]\n\nwhere \\(R_n\\) is net radiation, \\(G\\) is heat flux into the ground or underlying medium, \\(H\\) is sensible heat flux to the air, and \\(\\lambda E\\) is latent heat flux associated with evapotranspiration. Other storage terms can be important for forests, water bodies, and short averaging periods.\n\nThe aerodynamic component describes turbulent exchanges between the surface and the atmosphere. These exchanges depend on wind, surface roughness, and atmospheric stability. The biological component represents restrictions on water loss, especially the regulation of vapour movement through plant stomata.\n\nThe equation combines these components while approximately eliminating the need to measure the effective evaporating-surface temperature. This is accomplished by linearizing the relationship between saturation vapour pressure and temperature near the measured air temperature."
    },
    {
      "heading": "General form",
      "text": "A common resistance-based form is\n\n\\[\\lambda E= \\frac{ \\Delta(R_n-G)+ \\rho_a c_p \\dfrac{e_s-e_a}{r_a} }{ \\Delta+\\gamma\\left(1+\\dfrac{r_s}{r_a}\\right) }.\\]\n\nThe variables are:\n\nSymbol | Meaning | Typical SI unit\n\\(\\lambda E\\) | Latent heat flux | \\(\\mathrm{W\\,m^{-2}}\\)\n\\(\\lambda\\) | Latent heat of vaporization | \\(\\mathrm{J\\,kg^{-1}}\\)\n\\(E\\) | Evapotranspiration mass flux | \\(\\mathrm{kg\\,m^{-2}\\,s^{-1}}\\)\n\\(R_n\\) | Net radiation at the surface | \\(\\mathrm{W\\,m^{-2}}\\)\n\\(G\\) | Ground or substrate heat flux | \\(\\mathrm{W\\,m^{-2}}\\)\n\\(\\Delta\\) | Slope of the saturation-vapour-pressure curve at air temperature | \\(\\mathrm{Pa\\,K^{-1}}\\)\n\\(\\rho_a\\) | Air density | \\(\\mathrm{kg\\,m^{-3}}\\)\n\\(c_p\\) | Specific heat capacity of air at constant pressure | \\(\\mathrm{J\\,kg^{-1}\\,K^{-1}}\\)\n\\(e_s-e_a\\) | Vapour-pressure deficit | \\(\\mathrm{Pa}\\)\n\\(r_a\\) | Aerodynamic resistance | \\(\\mathrm{s\\,m^{-1}}\\)\n\\(r_s\\) | Bulk surface resistance | \\(\\mathrm{s\\,m^{-1}}\\)\n\\(\\gamma\\) | Psychrometric constant | \\(\\mathrm{Pa\\,K^{-1}}\\)\n\nPressure units must be consistent: if vapour pressures are expressed in kilopascals, the corresponding pressure-dependent quantities must use compatible units.\n\nThe vapour-pressure deficit, \\(e_s-e_a\\), is the difference between saturation vapour pressure at air temperature and actual vapour pressure. It expresses atmospheric drying demand more directly than relative humidity alone.\n\nThe psychrometric constant is approximately\n\n\\[\\gamma=\\frac{c_p P}{\\varepsilon\\lambda},\\]\n\nwhere \\(P\\) is atmospheric pressure and \\(\\varepsilon\\) is the ratio of the molecular mass of water vapour to that of dry air, approximately \\(0.622\\).\n\nInterpreting the terms\n\nThe term \\(\\Delta(R_n-G)\\) represents the contribution associated with available energy. The term \\(\\rho_a c_p(e_s-e_a)/r_a\\) represents the aerodynamic contribution associated with atmospheric dryness and vapour transport.\n\nThese are not independent evaporation rates that can simply be added without adjustment: the denominator couples them through the saturation-vapour-pressure relationship and the relative importance of surface and aerodynamic resistances.\n\nDividing latent heat flux by \\(\\lambda\\) gives a water mass flux. For liquid water, a loss of \\(1\\ \\mathrm{kg\\,m^{-2}}\\) corresponds approximately to a water depth of \\(1\\ \\mathrm{mm}\\)."
    },
    {
      "heading": "Surface and aerodynamic resistances",
      "text": "Surface resistance\n\nBulk surface resistance, \\(r_s\\), describes the effective restriction on vapour movement from the evaporating surface. For vegetation, it integrates the effects of leaf stomatal resistance, the amount of active leaf area, and the arrangement of the canopy. It may also represent contributions from exposed soil.\n\nSurface resistance is not generally constant. It responds to radiation, vapour-pressure deficit, soil-water availability, temperature, and plant physiological condition. Water stress commonly increases resistance as stomata close.\n\nA simplified canopy relationship is\n\n\\[r_s \\approx \\frac{r_l}{LAI_{\\mathrm{active}}},\\]\n\nwhere \\(r_l\\) is a representative leaf stomatal resistance and \\(LAI_{\\mathrm{active}}\\) is the active leaf area index. This approximation does not resolve differences between sunlit and shaded leaves or between vegetation and soil evaporation.\n\nAerodynamic resistance\n\nAerodynamic resistance, \\(r_a\\), describes the effectiveness of turbulent transport between the surface and a reference height in the atmosphere. Under an assumption of neutral atmospheric stability, it is often estimated as\n\n\\[r_a= \\frac{ \\ln\\left(\\dfrac{z_m-d}{z_{0m}}\\right) \\ln\\left(\\dfrac{z_h-d}{z_{0h}}\\right) }{ k^2u(z_m) },\\]\n\nwhere \\(z_m\\) and \\(z_h\\) are measurement heights for wind and humidity, \\(d\\) is zero-plane displacement height, \\(z_{0m}\\) and \\(z_{0h}\\) are roughness lengths for momentum and heat or water-vapour transfer, \\(k\\) is the von Kármán constant, and \\(u(z_m)\\) is wind speed at height \\(z_m\\).\n\nStronger wind generally reduces aerodynamic resistance. Taller, rougher vegetation also alters turbulent coupling, but its effect cannot be represented by wind speed alone. When atmospheric stratification is strongly stable or unstable, stability corrections may be needed."
    },
    {
      "heading": "Historical development",
      "text": "Howard Penman’s 1948 work combined surface energy balance and aerodynamic transport to estimate evaporation. The original combination approach was developed for freely evaporating wet surfaces and did not explicitly represent the physiological resistance of vegetation.\n\nJohn Monteith’s 1965 formulation incorporated surface resistance into the combination framework. This made the approach more suitable for vegetation, whose water loss depends not only on weather but also on stomatal control and canopy properties.\n\nSubsequent work developed resistance parameterizations, crop applications, and standardized reference surfaces. The Food and Agriculture Organization of the United Nations presented the FAO-56 Penman–Monteith method in its 1998 guidance on crop evapotranspiration. That standardized form is distinct from the general equation: it fixes the reference-surface properties so that estimates from different locations and periods can be compared."
    },
    {
      "heading": "FAO-56 reference evapotranspiration",
      "text": "The FAO-56 method defines a hypothetical grass reference surface with:\n\n- a height of \\(0.12\\ \\mathrm{m}\\);\n- a bulk surface resistance of \\(70\\ \\mathrm{s\\,m^{-1}}\\);\n- an albedo of \\(0.23\\);\n- complete ground cover and adequate water supply.\n\nFor daily calculations, the standardized equation is\n\n\\[ET_0= \\frac{ 0.408\\Delta(R_n-G) + \\gamma\\frac{900}{T+273}u_2(e_s-e_a) }{ \\Delta+\\gamma(1+0.34u_2) }.\\]\n\nHere:\n\n- \\(ET_0\\) is reference evapotranspiration in \\(\\mathrm{mm\\,day^{-1}}\\);\n- \\(R_n\\) and \\(G\\) are in \\(\\mathrm{MJ\\,m^{-2}\\,day^{-1}}\\);\n- \\(T\\) is mean daily air temperature in degrees Celsius;\n- \\(u_2\\) is wind speed at \\(2\\ \\mathrm{m}\\), in \\(\\mathrm{m\\,s^{-1}}\\);\n- \\(e_s\\) and \\(e_a\\) are in kilopascals;\n- \\(\\Delta\\) and \\(\\gamma\\) are in \\(\\mathrm{kPa\\,^{\\circ}C^{-1}}\\).\n\nThe factor \\(0.408\\) approximately converts available energy in megajoules per square metre to an equivalent evaporated water depth in millimetres. The coefficients incorporate the reference-surface assumptions and the daily time scale; they are not universal physical constants.\n\nFor daily estimates, saturation vapour pressure is normally calculated from daily maximum and minimum temperatures and then averaged. Calculating it only from mean temperature gives a different result because saturation vapour pressure is nonlinear in temperature. Hourly calculations require the appropriate time-scale formulation rather than direct reuse of the daily coefficients.\n\nReference, potential, and actual evapotranspiration\n\nReference evapotranspiration is an index of atmospheric evaporative demand over a specified surface. It is not automatically the actual water loss from a field, forest, or catchment.\n\nThe broader term potential evapotranspiration refers to evapotranspiration under specified conditions of unrestricted water availability, but its surface definition varies among methods. It should therefore not always be treated as synonymous with \\(ET_0\\).\n\nFor crops under standard, non-stressed conditions, evapotranspiration is commonly estimated using\n\n\\[ET_c=K_cET_0,\\]\n\nwhere \\(K_c\\) is a crop coefficient representing crop type, growth stage, and related surface properties. Water stress and separate soil-evaporation effects require additional treatment. Alternatively, the general Penman–Monteith equation can estimate actual fluxes when appropriate, time-varying surface properties and resistances are supplied."
    },
    {
      "heading": "Data requirements and applications",
      "text": "Typical inputs are air temperature, humidity, wind speed, and solar or net radiation. Atmospheric pressure, often estimated from elevation, is needed for pressure-dependent quantities. Net radiation may be measured or estimated from shortwave radiation, surface reflectance, and longwave radiation exchange.\n\nThe equation is used in:\n\n- Agricultural water management: estimating crop water use and supporting irrigation calculations.\n- Catchment hydrology: representing evaporative losses in a water balance alongside precipitation, runoff, and storage changes.\n- Drought assessment: estimating atmospheric evaporative demand as one component of some drought indicators.\n- Land-surface modelling: calculating exchanges between vegetation, soil, and atmosphere within an Earth system model.\n- Spatial analysis: mapping evapotranspiration demand from weather-station or gridded meteorological data.\n\nReference evapotranspiration alone is not an irrigation requirement. Effective rainfall, soil-water storage, crop development, management objectives, and irrigation-system losses also affect water requirements."
    },
    {
      "heading": "Assumptions, limitations, and uncertainty",
      "text": "Effective single-surface representation\n\nThe general equation is often implemented as a “big-leaf” model, treating the canopy and underlying surface as one effective source. Sparse vegetation, patchy wetting, and strong contrasts between soil and canopy temperature can violate this simplification. Two-source or multilayer models represent these components separately.\n\nResistance uncertainty\n\nActual evapotranspiration estimates can be highly sensitive to surface resistance, which is difficult to measure at landscape scale. Using a fixed, well-watered resistance for drought-stressed vegetation can overestimate water loss. Conversely, reference-surface resistance is intentionally fixed: departures of real vegetation from the reference do not invalidate the reference index.\n\nMeteorological data and averaging\n\nPoor radiation estimates, incorrect wind measurement heights, humidity errors, and unrepresentative station exposure can substantially affect results. Nonlinear relationships mean that calculations from monthly mean inputs need not equal the average of daily calculations.\n\nAdvection, storage, and turbulence\n\nHot, dry air moving over a wet surface can supply additional energy through downward sensible heat transfer, allowing latent heat flux to exceed local net radiation minus ground heat flux. The equation can represent aspects of such conditions through its aerodynamic term, but strong horizontal heterogeneity may challenge its assumptions.\n\nHeat storage can also be important in deep water, substantial vegetation canopies, and short time steps. Very weak turbulence and strongly stable atmospheric conditions complicate the resistance representation.\n\nClimatic interpretation and validation\n\nChanges in calculated \\(ET_0\\) reflect the combined effects of temperature, radiation, humidity, and wind. They do not by themselves establish changes in actual ecosystem water consumption. Under climate change, soil-water limitations, vegetation changes, and plant responses to atmospheric carbon dioxide can alter actual evapotranspiration independently of the standardized reference calculation.\n\nEvaluation may use a lysimeter, eddy covariance, or catchment water-balance observations. These methods sample different spatial scales and have their own uncertainties, so comparisons require compatible surface conditions, averaging periods, and definitions of the measured flux."
    }
  ],
  "links": [
    "evapotranspiration",
    "hydrology",
    "meteorology",
    "reference-evapotranspiration",
    "wind",
    "stoma",
    "temperature",
    "humidity",
    "albedo",
    "potential-evapotranspiration",
    "irrigation",
    "water-balance",
    "precipitation",
    "earth-system-model",
    "climate-change",
    "lysimeter"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}