{
  "id": "pascal-unit",
  "title": "Pascal (unit)",
  "lang": "en",
  "source_lang": "en",
  "summary": "The pascal (Pa) is the SI unit of pressure and stress, equal to one newton per square metre.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Pascal",
    "Pa"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/pascal-unit/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/pascal-unit/",
      "json": "https://aiwiki.page/zh/pascal-unit.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The pascal, symbol Pa, is the coherent derived unit of pressure and mechanical stress in the International System of Units (SI). One pascal is the pressure produced by a normal force of one newton distributed uniformly over an area of one square metre. The unit is named after the French mathematician and physicist Blaise Pascal. Because a pascal is small compared with many everyday pressures, multiples such as the kilopascal (kPa), megapascal (MPa), and gigapascal (GPa) are widely used."
    },
    {
      "heading": "Definition and dimensions",
      "text": "For a uniform pressure acting normally on a surface,\n\n\\[p=\\frac{F_\\perp}{A},\\]\n\nwhere \\(p\\) is pressure, \\(F_\\perp\\) is the normal component of force, and \\(A\\) is area. Consequently,\n\n\\[1\\ \\mathrm{Pa} =1\\ \\mathrm{N\\,m^{-2}} =1\\ \\mathrm{kg\\,m^{-1}\\,s^{-2}}.\\]\n\nHere the newton is the SI unit of force, while the kilogram, metre, and second are SI base units. Pressure therefore has the dimensions of mass divided by length and time squared.\n\nThe term coherent means that no numerical conversion factor is needed when the pascal is expressed in the corresponding SI units. A force of \\(1\\ \\mathrm{N}\\) acting normally and uniformly over \\(1\\ \\mathrm{m^2}\\) produces exactly \\(1\\ \\mathrm{Pa}\\).\n\nPressure also has the same dimensions as energy density:\n\n\\[1\\ \\mathrm{Pa}=1\\ \\mathrm{J\\,m^{-3}},\\]\n\nwhere the joule is the SI unit of energy. This dimensional equivalence is important in thermodynamics, but does not make pressure and energy density interchangeable physical quantities in every context."
    },
    {
      "heading": "Multiples and notation",
      "text": "Common multiples include:\n\nUnit | Symbol | Value in pascals | Typical contexts\nHectopascal | hPa | \\(10^2\\) | Atmospheric pressure\nKilopascal | kPa | \\(10^3\\) | Tyre pressures, ventilation, engineering\nMegapascal | MPa | \\(10^6\\) | Hydraulic systems, material strength\nGigapascal | GPa | \\(10^9\\) | Elastic stiffness, high-pressure research\n\nThe unit name is written in lowercase, pascal, except at the beginning of a sentence. Its symbol is Pa, with an uppercase P because it derives from a person's name. Symbols are not pluralized: “20 pascals” is written “20 Pa,” not “20 Pas.” A space separates the numerical value from the symbol, while a prefix is attached directly to it, as in “250 kPa.”"
    },
    {
      "heading": "Relationships to other pressure units",
      "text": "Several non-SI pressure units remain common. Their relationships to the pascal include:\n\nUnit | Relationship\nBar | \\(1\\ \\mathrm{bar}=100\\,000\\ \\mathrm{Pa}\\), exactly\nMillibar | \\(1\\ \\mathrm{mbar}=100\\ \\mathrm{Pa}=1\\ \\mathrm{hPa}\\), exactly\nStandard atmosphere | \\(1\\ \\mathrm{atm}=101\\,325\\ \\mathrm{Pa}\\), exactly\nTorr | \\(1\\ \\mathrm{Torr}=\\frac{101\\,325}{760}\\ \\mathrm{Pa}\\approx133.322\\ \\mathrm{Pa}\\)\nPound-force per square inch | \\(1\\ \\mathrm{psi}\\approx6\\,894.757\\ \\mathrm{Pa}\\)\n\nThus standard atmospheric pressure is \\(101.325\\ \\mathrm{kPa}\\), or \\(1013.25\\ \\mathrm{hPa}\\). This is a defined reference value, not a claim that actual atmospheric pressure is constant.\n\nPressure expressed as the height of a liquid column requires additional information. For a static liquid of approximately uniform density, the pressure difference is\n\n\\[\\Delta p=\\rho gh,\\]\n\nwhere \\(\\rho\\) is liquid density, \\(g\\) is local gravitational acceleration, and \\(h\\) is the vertical height difference. An actual column's pressure therefore depends on the liquid, its temperature, and local gravity; conventional column-based pressure units may instead use specified reference conditions."
    },
    {
      "heading": "Physical quantities expressed in pascals",
      "text": "Pressure and stress\n\nPressure describes a compressive normal action per unit area. In a fluid at rest, pressure at a point is isotropic: it acts equally in every direction.\n\nMechanical stress is a more general description of internal force per unit area in a material. Both normal stress and shear stress are measured in pascals. Unlike pressure, the complete stress state generally requires a tensor rather than a single scalar value.\n\nElastic moduli, including Young's modulus, are also expressed in pascals because they relate stress to dimensionless strain. A modulus measured in gigapascals describes stiffness, not necessarily the stress at which the material breaks.\n\nAbsolute, gauge, and differential pressure\n\nThe pascal does not specify a pressure's reference level:\n\n- Absolute pressure is referenced to a perfect vacuum.\n- Gauge pressure is referenced to ambient atmospheric pressure.\n- Differential pressure is the difference between two pressures.\n\nFor the same measurement location,\n\n\\[p_{\\mathrm{absolute}}=p_{\\mathrm{gauge}}+p_{\\mathrm{ambient}}.\\]\n\nThese are different measurement conventions, not different units. A value such as “200 kPa” may therefore be incomplete unless its reference is clear. Qualifiers such as “absolute” or “gauge” belong to the description of the quantity; the SI unit symbol remains Pa."
    },
    {
      "heading": "Applications and measurement",
      "text": "In meteorology, hectopascals are widely used for pressure in the Earth's atmosphere. Their numerical equivalence to millibars allows weather records and maps to retain familiar pressure values.\n\nEngineering commonly uses kilopascals and megapascals for fluid systems and mechanical loads. Materials science uses megapascals for many strength measurements and gigapascals for elastic moduli. Low-pressure and vacuum measurements may use pascals or submultiples such as millipascals.\n\nPressure can be measured using liquid-column manometers, piston gauges, and electronic transducers. The choice of instrument depends on pressure range, reference pressure, working fluid, and required accuracy. Calibration connects instrument readings to reference standards, while measurement uncertainty accounts for effects such as temperature sensitivity, drift, and uncertainty in the reference measurement."
    },
    {
      "heading": "Historical adoption",
      "text": "The name honours Blaise Pascal's seventeenth-century investigations of fluids and atmospheric pressure. It does not imply that Pascal himself defined the modern SI unit.\n\nBefore the special name was adopted, SI pressure could be expressed as newtons per square metre. In 1971, the 14th General Conference on Weights and Measures adopted the special name pascal and symbol Pa for this derived unit. The adoption supplied a convenient name without changing the underlying definition."
    }
  ],
  "links": [
    "pressure",
    "international-system-of-units",
    "blaise-pascal",
    "force",
    "newton-unit",
    "kilogram",
    "metre",
    "second",
    "energy-density",
    "joule",
    "thermodynamics",
    "density",
    "atmosphere-of-earth",
    "calibration",
    "measurement-uncertainty",
    "general-conference-on-weights-and-measures"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}